Whether DCC is disabled depends on the access flags with which the image
is bound: image_load supports DCC, but store and atomic don't.
v2: remove an unnecessary masking of images->desc.enabled_mask
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This can increase perf for shaders that kill pixels (kill, alpha-test,
alpha-to-coverage).
v2: add comments
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Still disabled.
Only prologs & epilogs are compiled in draw calls, but each variant of those
is compiled only once per process.
VS is always compiled as hw VS.
TES is always compiled as hw VS.
LS and ES stages are always compiled on demand.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
It only exports the primitive ID.
Also used by TES when it's compiled as VS.
The VS input location of the primitive ID input is v2.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Prologs (shader binaries inserted before the API shader binary) need to
know this, so that they won't change the input registers unintentionally.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
The texture slot is expanded to 16 dwords containing 2 descriptors.
Those can be:
- Image and fmask, or
- Image and sampler state
By carefully choosing the locations, we can put all three into one slot,
with the fmask and sampler state being mutually exclusive.
This improves shaders in 2 ways:
- 2 user SGPRs are unused, shaders can use them as temporary registers now
- each pair of descriptors is always on the same cache line
v2: cosmetic changes: add back v8i32, don't load a sampler state & fmask
at the same time
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
It was partly a state and partly emulated by shader code, but since we want
to do this in a fragment shader prolog, we need to put it into the shader
key, which will be used to generate the prolog.
This also removes the spi_ps_input states and moves the registers
to the PS state.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
BCOLOR inputs were immediately after COLOR inputs. Thus, all following inputs
were offset by 1 if color_two_side was enabled, and not offset if it was not
enabled, which is a variation that's problematic if we want to have 1 variant
per shader and the variant doesn't care about color_two_side (that should be
handled by other bytecode attached at the beginning).
Instead, move BCOLOR inputs after all other inputs, so BCOLOR0 is at location
"num_inputs" if it's present. BCOLOR1 is next.
This also allows removing si_shader::nparam and
si_shader::ps_input_param_offset, which are useless now.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
v2: drop inline keyword
drop radeon_llvm_dispose_kernel_module wrapper
v3: move definitions to .c file
use in radeonsi
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
It is only used during shader creation now, so no need to keep it around
afterwards.
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This does change the behavior slightly:
If a shader writes COLOR[i] and that color buffer isn't bound,
the shader will export MRT_NULL instead and discard the IR tree that
calculates the output. The only exception is alpha-to-coverage, which
requires an alpha export.
v2: - update a comment about 16BPC
- account for MRTZ when when fixing alpha-test/kill
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
The function will be extended to dump all binaries shaders will consist of,
so si_shader* makes sense here.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
There will be 1 config per variant, which will be a union of configs
from {prolog, main, epilog}. For now, just add the structure.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
because the API pixel shader binary will not emulate alpha test one day,
so the KILL_ENABLE bit must be determined elsewhere.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This will allow us to send shader debug info.
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> (v1)
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This reduces the shader key for ES.
Use a fixed attrib location based on (semantic name, index).
The ESGS item size is determined by the physical index of the highest ES
output, so it's almost always larger than before, but I think that
shouldn't matter as long as the ESGS ring buffer is large enough.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
I discovered that increasing the ESGS ring size fixes GS hangs on Tonga,
so let's do it properly.
There is now a separate init_config_gs_rings state that is not immutable,
because GS rings are resized when needed.
This also saves some memory. Most apps won't need more than 1MB
per ring per shader engine.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
The "current" shader pointer is moved from the CSO to the context, so that
the CSO is mostly immutable.
The only drawback is that the "current" pointer isn't saved when unbinding
a shader and it must be looked up when the shader is bound again.
This is also a prerequisite for multithreaded shader compilation.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
- convert 16 states to 1 atom
- only emit 1 scissor if VIEWPORT_INDEX isn't written
- use only one packet when emitting consecutive scissors
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: 10.6 11.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
It must be obtained from the VS.
The GS scenario A must be enabled for PrimID to be generated for the VS.
+ 4 piglits
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
This is prep work for using it in the interpolation code
later.
Also add storage for the input interpolation mode so we
can pick it up later.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This eliminates the error prone logic in si_shader_vs recalculating this
value.
It also fixes TGSI_SEMANTIC_CLIPDIST outputs incorrectly not being
counted for VS exports. They need to be counted because they are passed
to the pixel shader as parameters as well.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91193
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Fixes a crash in genymotion with several threads compiling shaders
concurrently.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89746
Cc: 10.5 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
The fragment shader multiplies the alpha channel with gl_SampleMaskIn.
If blending is enabled, it looks like MSAA.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
v2:
- Only emit write SPI_TMPRING_SIZE once per packet.
- Use context global scratch buffer.
v3:
- Patch shaders using WRITE_DATA packet instead of map/unmap.
- Emit ICACHE_FLUSH, CS_PARTIAL_FLUSH, PS_PARTIAL_FLUSH, and
VS_PARTIAL_FLUSH when patching shaders.
v4:
- Code cleanups.
- Remove unnecessary multiplies.
v5:
- Patch shaders in system memory and re-upload to vram.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
They were reinventing tgsi_shader_info. They are unused now.
radeon_llvm_context::load_input can be NULL if input fetching is implemented
in some other way.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
No code in Mesa sets the usage mask to any other value.
The final mask is AND'ed with enable bits from the rasterizer state anyway.
If somebody implements setting usage masks in st/mesa, we can use
tgsi_shader_info to get it more easily.
This is a prerequisite for the following commit.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
It only needs the constant buffer with clip planes and read-write resources
for the GS->VS ring and streamout. That's 2 pointers.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
st/mesa has the same flag in its shader key, we don't need to do it
in the driver anymore.
Instead, use TGSI_INTERPOLATE_LOC_SAMPLE, which is what st/mesa sets.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Instead, pass the layout of GS inputs in memory to the ES using the shader
key. Only 64 bits are needed to represent the layout in the key.
Mixing and matching different VS and GS shaders should now always work.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
I will need this for fixing sample shading with 1 sample.
The good news is that all shader pm4 states no longer use the current context
state, so we can generate the pm4 states outside of draw_vbo if needed.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
The draw indirect packets cannot set VGT_INDX_OFFSET, they can only set user
data SGPRs. This is the only way to support start/index_bias with indirect
drawing.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Nicolai Hähnle
Marek Olšák
Jan Vesely
Tom Stellard
Dave Airlie
Michel Dänzer
Andreas Hartmetz