The NGG hardware pipeline doesn't track these statistics automatically,
and in fact *cannot* track them automatically when API geometry shaders
are involved, so we accumulate statistics in the shader using atomic
adds.
This implementation accumulates statistics via the memory system and
the RW buffer descriptor setup. We could use GDS, but since these
atomics aren't latency-sensitive, that basically just trades off
L2$ bandwidth vs. export bus bandwidth. One single memory transaction
per shader workgroup doesn't seem too bad. The result ring buffer in
memory is needed either way to avoid pipeline stalls.
The shader code contains the atomic unconditionally, though the
GFX10_GS_QUERY_BUF is a null buffer when no queries are active. The
atomic is simply discarded by the shader hardware in that case.
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
We always use NGG by default, except when tessellation is enabled with
extreme geometry shader amplification.
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The introduction of GCR_CNTL makes cache flush handling on gfx10
sufficiently different that it makes sense to just use a separate
function.
Since emit_cache_flush is called quite early during context init,
we initialize the pointer explicitly in si_create_context.
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This mainly removes and simplifies code that is no longer needed.
There were some issues with the DB->CB stencil copy on gfx10, so let's
just use a fragment shader blit for all ZS mappings. It's more reliable.
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
We'll have to extend this at some point, and using a bitfield union in
this way makes it easier to get the right index without excessive
branching.
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
debugoptimized builds don't define NDEBUG, but they also don't define
DEBUG. We want to enable cheap debug code for these builds.
I only chose those occurences that I care about.
Reviewed-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Acked-by: Dave Airlie <airlied@redhat.com>
We already use GFX9 and I don't want us to have confusing naming
in the driver. GFXn naming is better from the driver perspective,
because it's the real version of the gfx portion of the hw. Also,
CIK means Bonaire-Kaveri-Kabini, it doesn't mean CI.
It shouldn't confuse our SDMA, UVD, VCE etc. code much. Those have
nothing to do with GFXn and they have their own version numbers.
The overall goal is to support unaligned loads from vertex buffers
natively on SI.
In the unaligned case, we fall back to the general case implementation in
ac_build_opencoded_load_format. Since this function is fully general,
we will also use it going forward for cases requiring fully manual format
conversions of dwords anyway.
This requires a different encoding of the fix_fetch array, which will now
contain the entire format information if a fixup is required.
Having to check the alignment of vertex buffers is awkward. To keep the
impact on the fast path minimal, the si_context will keep track of which
vertex buffers are (not) at least dword-aligned, while the
si_vertex_elements will note which vertex buffers have some (at most dword)
alignment requirement. Vertex buffers should be dword-aligned most of the
time, which allows a fast early-out in almost all cases.
Add the radeonsi_vs_fetch_always_opencode configuration variable for
testing purposes. Note that it can only be used reliably on LLVM >= 9,
because support for byte and short load is required.
v2:
- add a missing check to si_bind_vertex_elements
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Needed to track context rolls caused by streamout and ACQUIRE_MEM.
ACQUIRE_MEM can occur outside of draw calls.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110355
v2: squashed patches and done more rework
Cc: 19.0 <mesa-stable@lists.freedesktop.org>
Move the definition of radeonsi_clear_db_cache_before_clear there,
as well as radeonsi_enable_nir.
This removes the AMD_DEBUG=nir option.
We currently still have two places for options: the driconf machinery
and AMD_DEBUG/R600_DEBUG. If we are to have a single place for options,
then the driconf machinery should be preferred since it's more flexible.
The only downside of the driconf machinery was that adding new options
was quite inconvenient. With this change, a simple boolean option can
be added with a single line of code, same as for AMD_DEBUG.
One technical limitation of this particular implementation is that while
almost all driconf features are available, the translation machinery doesn't
pick up the description strings for options added in si_debvug_options. In
practice, translations haven't been provided anyway, and this is intended
for developer options, so I'm not too worried. It could always be added
later if anybody really cares.
v2:
- use bool instead of uint8_t for options
- si_debug_options.inc -> si_debug_options.h
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
so that bound compute shader resources won't be added when they are not
needed and same for graphics.
Acked-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
The OpenMAX state tracker will use this.
RadeonSI is adapted to use pipe_grid_info::last_block instead of its
internal state.
Acked-by: Leo Liu <leo.liu@amd.com>
v2: use tc.stream_uploader in si buffer_transfer_map if not called from
the driver thread
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com> (v1)
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
We should get fewer context rolls with the SET_CONTEXT_REG optimization,
but it would have been for nothing if the scissor state rolled the context
anyway. Don't emit the scissor state if there is no context roll.
R600_DEBUG=gisel will tell LLVM to use GlobalISel rather than
SelectionDAG for instruction selection.
v2: mareko: move the helper to src/amd/common
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Tom Stellard <tstellar@redhat.com>
As precursor to moving init to common code, just rename the struct
and move it.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This allows to avoid having to see garbage in Dying Light loading screen
at least, which probably expects Windows/NV behavior of all allocations
being zeroed by default.
Analogous to radv flag with the same name.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Remembering latest states of registers to eliminate redunant SET_CONTEXT_REG packets
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Fixes truncation warning in gcc 8.1
Fixes: 8539c9bf31 ("gallium/radeon: add the kernel version into the renderer string")
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
The compiler queue was limited to 3 threads, so shader-db running
on a 16-thread CPU would have a bottleneck on the 3-thread queue.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Tested-by: Benedikt Schemmer <ben at besd.de>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
It will contain more variables.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Tested-by: Benedikt Schemmer <ben at besd.de>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reduce swizzle constraints to the ALPHA_IS_ON_MSB constraint and the clear
value of 1.
This significantly changes the DCC fast clear code, and fixes fast clear
for RGB formats without alpha.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
(This patch doesn't enable the behavior. It will be enabled in a later
commit.)
Draw calls from multiple IBs can be executed in parallel.
v2: do emit partial flushes on SI
v3: invalidate all shader caches at the beginning of IBs
v4: don't call si_emit_cache_flush in si_flush_gfx_cs if not needed,
only do this for flushes invoked internally
v5: empty IBs should wait for idle if the flush requires it
v6: split the commit
If we artificially limit the number of draw calls per IB to 5, we'll get
a lot more IBs, leading to a lot more partial flushes. Let's see how
the removal of partial flushes changes GPU utilization in that scenario:
With partial flushes (time busy):
CP: 99%
SPI: 86%
CB: 73:
Without partial flushes (time busy):
CP: 99%
SPI: 93%
CB: 81%
Tested-by: Benedikt Schemmer <ben@besd.de>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
so that the draw is started as soon as possible.
v2: only prefetch the API VS and VBO descriptors
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Using mesa OpenCL failed on a big endian PowerPC machine because
si_vgt_param_key is using bitfields and a 32 bit int for an
index into an array.
Fix si_vgt_param_key to work correctly on both little endian
and big endian machines.
Signed-off-by: Bas Vermeulen <bas@daedalean.ai>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Most files in gallium/radeon now include si_pipe.h.
chip_class and family are now here:
sscreen->info.family
sscreen->info.chip_class
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This requires out-of-band creation of fences, and will be signaled to
the pipe_context::flush implementation by a special TC_FLUSH_ASYNC flag.
v2:
- remove an incorrect assertion
- handle fence_server_sync for unsubmitted fences by
relying on the improved cs_add_fence_dependency
- only implement asynchronous flushes on amdgpu
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
It's inaccurate. Instead, see the copyright and use "git log" and
"git blame" to know the authorship.
Acked-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
It appears that flushing the DB metadata is actually not sufficient
since the driver uses the new VS blit shaders. This looks quite
strange though, but it seems like we need to flush DB for fixing
the corruption.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102955
Fixes: 69ccb9dae7 (radeonsi: use new VS blit shaders (VS inputs in SGPRs)
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
We'll use it in the scissors / clip / guardband state.
v2: avoid a performance regression on r600 when applied to
(pre-fork) stable branches
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This fixes the extremely unlikely case that an application uses
0x80000000 or 0x3f800000 as border color for an integer texture and
helps in the also, but perhaps slightly less, unlikely case that 1 is
used as a border color.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
The hardware usually does this automatically. However, we upgrade
depth to Z32_FLOAT to enable TC-compatible HTILE, which means the
hardware no longer clamps the comparison value for us.
The only way to tell in the shader whether a clamp is required
seems to be to communicate an additional bit in the descriptor
table. While VI has some unused bits in the resource descriptor,
those bits have unfortunately all been used in gfx9. So we use
an unused bit in the sampler state instead.
Fixes dEQP-GLES3.functional.texture.shadow.2d.linear.equal_depth_component32f
and many other tests in dEQP-GLES3.functional.texture.shadow.*
Fixes: d4d9ec55c5 ("radeonsi: implement TC-compatible HTILE")
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
We do not enable this by default for additive blending, since it slightly
breaks OpenGL invariance guarantees due to non-determinism.
Still, there may be some applications can benefit from white-listing
via the radeonsi_commutative_blend_add drirc setting without any real
visible artifacts.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
This option enables a performance optimization where typical non-blending
draws with depth buffer may be rasterized out-of-order (on VI+, multi-SE
chips).
This optimization can lead to incorrect results when an applications
renders multiple objects with the same Z value at the same pixel, so we
will never enable it by default. But there may be applications that could
benefit from white-listing.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
This does not take commutative blending into account yet.
R600_DEBUG=nooutoforder disables it.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
When the HS wave is empty, the hardware writes the LS VGPRs starting at
v0 instead of v2. Workaround by shifting them back into place when
necessary. For simplicity, this is always done in the LS prolog.
According to the hardware team, this will be fixed in future chips,
so take that into account already.
Note that this is not a bug fix, as the bug was already worked
around by commit 166823bfd2 ("radeonsi/gfx9: add a temporary workaround
for a tessellation driver bug"). This change merely replaces the
workaround by one that should be better.
v2: add workaround code to shader only when necessary
v3: clarify the prefer_mono comment
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This fixes GL45-CTS.shader_image_load_store.basic-glsl-earlyFragTests.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This increases performance, but it was tuned for Raven, not Vega.
We don't know yet how Vega will perform, hopefully not worse.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
We have come to the conclusion that it doesn't improve performance.
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Currently, when the array is full it is resized but it can grow
over and over because we don't try to re-use descriptor slots.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Using VRAM address as bindless handles is not a good idea because
we have to use LLVMIntToPTr and the LLVM CSE pass can't optimize
because it has no information about the pointer.
Instead, use slots indexes like the existing descriptors. Note
that we use fixed 16-dword slots for both samplers and images.
This doesn't really matter because no real apps use image handles.
This improves performance with DOW3 by +7%.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Use the auto logger facility, so that CS chunks will be interleaved
with other log info.
v2:
- fix some crashes when not using CE
- fix skipping "previous" chunks of current (unflushed) IB
- fix error handling in si_begin_cs_debug
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
so that we don't rely on si_pm4_state_enabled_and_changed, allowing us
to move prefetches after draw calls.
v2: ckear the dirty mask after unbinding shaders
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de> (v1)
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com> (v1)
I'd like to be able to move the prefetch call site around.
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This fixes corruption with bindless textures in Dawn Of War 3.
The do_update_surf_dirtiness mechanism was complicated and dirty_level_mask
was only updated after the first draw call. The problem is bindless textures
are checked for decompression every draw call and we would only decompress
after the first draw call. The solution is to set dirtiness after the last
draw call to the framebuffer, so the (unconditional) decompression of
bindless textures happens at the right time.
Cc: 17.2 <mesa-stable@lists.freedesktop.org>
Tested-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
For inputs and outputs, indirect indexing is lowered by the GLSL compiler.
For temporaries, use alloca and disable the "promote-alloca" pass.
In the future, we could switch all codepaths to alloca permanently and
just rely on the "promote-alloca" pass.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Use the mechanism of si_decompress_textures, but instead of doing
the actual decompression, just flag the DB cache flush there.
This removes a lot of unnecessary DB cache flushes.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Needed for updating all resident texture descriptors when
dirty_tex_counter changes.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This is done by introducing a separate list.
si_decompress_textures() is now 5x faster.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
When texture buffers are invalidated the addr in the resident
descriptor has to be updated but we can't create a new descriptor
because the resident handle has to be the same.
Instead, use the WRITE_DATA packet which allows to update memory
directly but graphics/compute have to be idle in case the GPU is
reading the descriptor.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This adds some new helper functions to know if the current draw
call (or dispatch compute) is using bindless samplers/images,
based on TGSI analysis.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Similar to the existing decompression code path except that it
loops over the list of resident textures/images.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This implements the Gallium interface. Decompression of resident
textures/images will follow in the next patches.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
For each texture/image handles, we need to allocate a new
buffer for the bindless descriptor. But when the number of
buffers added to the current CS becomes high, the overhead
in the winsys (and in the kernel) is important.
To reduce this bottleneck, the idea is to suballocate the
bindless descriptors using a slab similar to the one used
in the winsys.
Currently, a buffer can hold 1024 bindless descriptors but
this limit is arbitrary and could be changed in the future
for some reasons. Once a slab is allocated the "base" buffer
is added to a per-context list.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The workaround causes a massive performance decrease on 1-SE parts.
(Cape Verde, Hainan, Oland)
The performance regression is already part of 17.0 and 17.1.
v2: check tess_uses_prim_id
Cc: 17.0 17.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
When a stencil buffer is part of the framebuffer state, it is
decompressed but because it's bindless, all draw calls set
stencil_dirty_level_mask to 1.
v2: Marek - set the flags outside the loop
- also clear and set framebuffer.do_update_surf_dirtiness there
- do it in the DB->CB copy path too
v3: Marek - save and restore the do_update_surf_dirtiness flag
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
A later commit will only upload descriptors used by shaders, so we won't do
full dumps anymore, so the only way to have a complete mirror of CE RAM
in memory is to do a separate dump after the last draw call.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Constant buffers: slot[16], .. slot[31] (ascending)
Shader buffers: slot[15], .. slot[0] (descending)
The idea is that if we have 4 constant buffers and 2 shader buffers, we only
have to upload 6 slots. That optimization is left for a later commit.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
What we care about is whether PrimID is used while tessellation is
enabled; whether it's used in TCS/TES or further down the pipeline is
irrelevant.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
pipe_draw_info::indexed is replaced with index_size. index_size == 0 means
non-indexed.
Instead of pipe_index_buffer::offset, pipe_draw_info::start is used.
For indexed indirect draws, pipe_draw_info::start is added to the indirect
start. This is the only case when "start" affects indirect draws.
pipe_draw_info::index is a union. Use either index::resource or
index::user depending on the value of pipe_draw_info::has_user_indices.
v2: fixes for nine, svga
The use of PrimID in the pixel shader is too rare to deserve such
a sizable support code.
The initial idea of the VS epilog was to move the clipping code there and
remove it based on states, but optimized variants are now used to do that
and are easier to support, so the VS epilog has turned out to be not so
useful.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Note: si_shader.h has also "type" variable that should be changed to
"enum pipe_prim_type", however it triggers a bunch of warnings about
unhandled switches, so due not knowing the correct way to handle them, I
decided to leave it as is.
Signed-off-by: Constantine Kharlamov <Hi-Angel@yandex.ru>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
The same PS epilog workaround as for 8-bit integer formats is required,
since the CB doesn't do clamping.
Fixes GL45-CTS.gtf32.GL3Tests.packed_pixels.packed_pixels*.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The update frequency is very low.
Difference: Only account for the size when allocating a new one and when
starting a new IB, and check for NULL. (v3)
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
The perf difference is very small: 0.99% -> 0.40% for the time spent
in si_get_ia_multi_vgt_param when si_draw_vbo is 20%. Pretty much nothing.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
We can hardcode all of the fields for swizzling in the geometry shader.
The advantage is that we use fewer descriptor slots and we no longer have to
update any of the (ring) descriptors when the geometry shader changes.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
key->part.*: prolog and epilog flags only
key->as_{ls,es}: special flags
key->mono.*: flags for monolithic compilation only
Tested-by: Edmondo Tommasina <edmondo.tommasina@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Fixes GL45-CTS.geometry_shader.adjacency.adjacency_indiced_triangle_strip and
others.
This leaves the case of triangle strips with adjacency and primitive restarts
open. It seems that the only thing that cares about that is a piglit test.
Fixing this efficiently would be really involved, and I don't want to use the
hammer of degrading to software handling of indices because there may well
be software that uses this draw mode (without caring about the precise
rotation of triangles).
v2:
- skip the GS prolog entirely if workaround is not needed
- only check for TES (TES is always non-null when tessellation is used)
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The copy shader only depends on the selector. This change avoids creating
separate code paths for monolithic vs. non-monolithic geometry shaders.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
I guess this is not needed because dead code elimination removes
the declaration.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
do it at bind time, so that pipe_sampler_view is immutable with regard to
buffer reallocations and we don't have to remember all existing buffer
views.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Note that for indirect draws, the new MULTI firmware packets are required.
There's also no need to reset last_{start_instance,sh_base_reg}, since
resetting last_base_vertex is sufficient.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Prefer to use DRAW_(INDEX)_INDIRECT_MULTI when available in the firmware.
Versions for SI and CI already added as provided by the firmware team, but
keep in mind that they won't currently be used since the radeon kernel module
has no interface to query the firmware version.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Unlike SC, the small primitive filter does not automatically use center
locations in 1xAA mode, so this is needed to avoid artifacts caused by
the small primitive filter discarding triangles that it shouldn't.
As a side effect of how the effective number of samples is now calculated,
this patch also avoids submitting the sample locations for line/poly smoothing
when they're not really needed.
Cc: 12.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Main shader parts and geometry shaders are compiled asynchronously
by util_queue. si_create_shader_selector doesn't wait and returns.
si_draw_vbo(si_shader_select) waits for completion.
This has the best effect when shaders are compiled at app-loading time.
It doesn't help much for shaders compiled on demand, even though
VS+PS compilation should take as much as time as the bigger one of the two.
If an app creates more shaders, at most 4 threads will be used to compile
them.
Debug output disables this for shader stats to be printed in the correct
order.
(We could go even further and build variants asynchronously too, then emit
draw calls without waiting and emit incomplete shader states, then force IB
chaining to give the compiler more time, then sync the compilation at the IB
flush and patch the IB with correct shader states. This is great for
compilation before draw calls, but there are some difficulties such as
scratch and tess states requiring the compiler output, and an on-disk shader
cache will likely be a much better and simpler solution.)
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Getting LLVM IRs of hanging shaders have never been easier.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
ported from Vulkan (and no source explains why this is needed)
Cc: 12.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>