This ran afoul of Iris's use of nir_lower_clamp_color_outputs which
applies fsat() before writes to vertex shader color outpus.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Fixes: 7725d60938 ("intel/fs: Emit better code for b2f(inot(a)) and b2i(inot(a))")
Other places will need to do this soon to properly handle source
swizzles. The patch looks a little odd, but the change is pretty
straight forward. All of the swizzle and mask handling is moved out,
but the code for handling move instructions and vecN instructions
remains in nir_emit_alu.
I'm not terribly pleased with the "need_dest" parameter, but
get_nir_dest is (somewhat surprisingly) destructive. I am open to
suggestions of alternatives.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
To allow cmod propagation from a MOV in a sequence like:
and(16) g31<1>UD g20<8,8,1>UD g22<8,8,1>UD
mov.nz.f0(16) null<1>F g31<8,8,1>D
A similar change to the vec4 backend had no effect.
Somewhere between c1ec582059 and 40fc4b5acd (1,094 commits) the
effectiveness of this patch diminished, and as of commit d7e0d47b9d
(nir: Add a bunch of b2[if] optimizations) this optimization no longer
has any effect on any platform.
A later patch "intel/fs: Use De Morgan's laws to avoid logical-not of a
logic result on Gen8+," generates some instruction sequences that
require this change in order for cmod propagation to make progress.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The scalar back-end uses SHADER_OPCODE_SEND for all surface messages so
we no longer need the non-logical opcodes there. Prefix them VEC4 so
it's clear that they're only used by the vec4 back-end.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
The unused typed surface read/write support in the vec4 back-end has
been dropped and the fs back-end now uses SHADER_OPCODE_SEND for all
image and buffer ops. There's no reason to keep these opcodes around
anymore.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Since switching to SHADER_OPCODE_SEND for image operations, we no longer
need the non-logical opcode.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
All of the actual abstraction (except possibly setting size_written)
happens as part of the logical opcodes. The only thing that the surface
builder is providing at this point is extra levels of functions to call
through. I'm going to be adding bindless image support soon and all the
extra abstraction here is just getting in the way.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
It makes more sense to start at the surface then move on to the address
and then the data. Also, this is a really good test of whether or not
we got all the places that use the sources by explicit integer number.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
The optimization in 4cd1a0be76 introduced a replacement of :
cmp(8).z.f0.0 vgrf11.y:D, vgrf10.xxxx:D, vgrf2.xyyy:D
...
cmp(8).nz.f0.0 null.x:D, vgrf11.yyyy:D, 0D
By :
cmp(8).z.f0.0 vgrf15.x:D, vgrf10.xxxx:D, vgrf2.yyyy:D
...
mov(8) vgrf11.y:D, vgrf15.yyyy:D
The first cmp instruction is storing in x while the second mov is
sourcing from y. We need to take into account where the replacement on
the scan_inst destination is going to store thing so that the
replacement mov can source things from the correct location.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 4cd1a0be76 ("i965/vec4: Propagate conditional modifiers from more compares to other compares")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109759
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Add support to the i965 DRI driver to sample from XYUV8888 buffers.
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
For split indirect sends we have to put the EOT parameter in the
extended descriptor as well as the instruction itself so just calling
brw_inst_set_eot is insufficient. Moving the EOT handling handling into
the send_indirect_[split]_message helper lets us handle it properly.
Even though the hardware spec claims that any "integer DWord multiply"
operation is affected by the regioning restrictions of CHV/BXT/GLK,
this is inconsistent with the behavior of the simulator and with
empirical evidence -- Return false from has_dst_aligned_region_restriction()
for such instructions as a micro-optimization.
Tested-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Strides up to 32B can be implemented for the source regions of most
instructions by leveraging either the vertical or the horizontal
stride of the hardware Align1 region. The main motivation for this is
that currently the lower_integer_multiplication() pass will happily
double the stride of one of the 32-bit sources, which can blow up if
the stride of the original source was already the maximum value
allowed by the hardware.
An alternative would be to use the regioning legalization pass in
order to lower such strides into the composition of multiple legal
strides, but that would be somewhat less efficient.
This showed up as a regression from my commit cbea91eb57
in Vulkan 1.1 CTS tests on CHV/BXT platforms, however it was really a
pre-existing problem that had affected conformance on other platforms
without native support for integer multiplication. CHV/BXT were
getting around it because the code I removed in that commit had the
"fortunate" side effect of emitting narrower regions that didn't hit
the hardware stride limit after lowering. Beyond fixing the
regression this fixes ~90 additional Vulkan 1.1 subgroup CTS tests on
ICL (that's why this patch is marked for inclusion in mesa-stable even
though the original regressing patch was not).
According to Jason, a nearly equivalent change had been committed
previously as e8c9e65185 and then (mistakenly?) reverted as
a31d038208.
Cc: mesa-stable@lists.freedesktop.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109328
Reported-by: Mark Janes <mark.a.janes@intel.com>
Tested-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This is required in combination with the following commit, because
otherwise if a source region with an extended 8+ stride is present in
the instruction (which we're about to declare legal) we'll end up
emitting code that attempts to write to such a region, even though
strides greater than four are still illegal for the destination.
Tested-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Because the "low" temporary needs to be accessed with word type and
twice the original stride, attempting to preserve the alignment of the
original destination can potentially lead to instructions with illegal
destination stride greater than four. Because the CHV/BXT alignment
restrictions are now being enforced by the regioning lowering pass run
after lower_integer_multiplication(), there is no real need to
preserve the original strides anymore.
Note that this bug can be reproduced on stable branches, but
back-porting would be non-trivial, because the fix relies on the
regioning lowering pass recently introduced.
Tested-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Currently the execution type calculation will return a bogus value in
cases like:
mov_indirect(8) vgrf0:w, vgrf1:w, vgrf2:ud, 32u
Which will be considered to have a 32-bit integer execution type even
though the actual indirect move operation will be carried out with
16-bit precision.
Similarly there's no need to apply the CHV/BXT double-precision region
alignment restrictions to such control sources, since they aren't
directly involved in the double-precision arithmetic operations
emitted by these virtual instructions. Applying the CHV/BXT
restrictions to control sources was expected to be harmless if mildly
inefficient, but unfortunately it exposed problems at codegen level
for virtual instructions (namely the SHUFFLE instruction used for the
Vulkan 1.1 subgroup feature) that weren't prepared to accept control
sources with an arbitrary strided region.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109328
Reported-by: Mark Janes <mark.a.janes@intel.com>
Fixes: efa4e4bc5f "intel/fs: Introduce regioning lowering pass."
Tested-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
v2 (idr): Move adding the test to after adding the fix. Reordering the
two commits prevents possible headaches for git-bisect with scripts that
always do 'ninja check'.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109404
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
v2: Fix silly bug in logic. s/||/&&/
All but one of the affected shaders is in an Unreal4 demo. The other is
in Tomb Raider. All of the cases that Ian investigated appear to be
sequences like the following
if (int(uint(some_float)) < 0) /* other relations too */
...
At least in Tomb Raider, it's not obvious that this sequence came from
the original shader.
In some of the Unreal demos, the shader contains code like
if (int(uint(textureLod(...))) > 0)
...
which explicitly generates the offending sequence.
All Gen6+ platforms had similar results (Skylake shown):
total instructions in shared programs: 15437170 -> 15437187 (<.01%)
instructions in affected programs: 4492 -> 4509 (0.38%)
helped: 0
HURT: 17
HURT stats (abs) min: 1 max: 1 x̄: 1.00 x̃: 1
HURT stats (rel) min: 0.05% max: 0.73% x̄: 0.66% x̃: 0.73%
95% mean confidence interval for instructions value: 1.00 1.00
95% mean confidence interval for instructions %-change: 0.57% 0.75%
Instructions are HURT.
total cycles in shared programs: 383007996 -> 383007992 (<.01%)
cycles in affected programs: 20542 -> 20538 (-0.02%)
helped: 6
HURT: 7
helped stats (abs) min: 2 max: 6 x̄: 5.33 x̃: 6
helped stats (rel) min: 0.11% max: 0.36% x̄: 0.32% x̃: 0.36%
HURT stats (abs) min: 4 max: 4 x̄: 4.00 x̃: 4
HURT stats (rel) min: 0.27% max: 0.27% x̄: 0.27% x̃: 0.27%
95% mean confidence interval for cycles value: -3.30 2.69
95% mean confidence interval for cycles %-change: -0.19% 0.19%
Inconclusive result (value mean confidence interval includes 0).
No changes on Iron Lake or GM45.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109404
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Tested-by: nagrigoriadis@gmail.com
Tested-by: Danylo Piliaiev <danylo.piliaiev@gmail.com>
We emit an FBL instruction which only exists since Gen7. This prevents
the test from segfaulting when run with TEST_DEBUG=1.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This fixes a bug in runscape where we were optimizing x >> 16 to an
extract and then negating and converting to float. The NIR to fs pass
was dropping the negate on the floor breaking a geometry shader and
causing it to render nothing.
Fixes: 1f862e923c "i965/fs: Optimize float conversions of byte/word..."
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109601
Tested-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Drops one instruction from fs-sign-int.shader_test. No change in
shader-db due to it having 0 instances of sign(genIType). This may hurt
isign64 if algebraic runs before int64 lowering, but I wasn't sure how to
mark the algebraic opt as "every bit size but 64".
v2: Update commit message about shader-db.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> (v1)
Patch propagates given scale_factors to lowering options.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
It's more clear and means we don't have to update the array every time
we add an optional texture instruction argument
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
The sampler will be ignored since the underlying 'ld_mcs' operation
won't use it, so just fill the field with 0 instead of the texture to
make it clearer that's the case.
This will also avoid is_high_sampler() to kick in unnecessarily, in
case we are using the operation for a texture with index >= 16.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
For some reason, this warning only occurs for me in release builds.
In file included from src/intel/compiler/brw_nir_lower_mem_access_bit_sizes.c:25:0:
src/intel/compiler/brw_nir_lower_mem_access_bit_sizes.c: In function ‘brw_nir_lower_mem_access_bit_sizes’:
src/compiler/nir/nir_builder.h:501:26: warning: ‘src_swiz[2]’ may be used uninitialized in this function [-Wmaybe-uninitialized]
alu_src.swizzle[i] = swiz[i];
~~~~~~~~~~~~~~~~~~~^~~~~~~~~
src/intel/compiler/brw_nir_lower_mem_access_bit_sizes.c:225:16: note: ‘src_swiz[2]’ was declared here
unsigned src_swiz[4];
^~~~~~~~
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Previously, we only applied the fix to shaders with a dispatch mode of
SIMD8 but the code it relies on for SIMD16 mode only applies to SIMD16
instructions. If you have a SIMD8 instruction in a SIMD16 shader,
neither would trigger and the restriction could still be hit.
Fixes: 232ed89802 "i965/fs: Register allocator shoudn't use grf127..."
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
By just assigning dst.type to src[i].type, we ensure that the offset at
the end of the loop actually offsets it by the right number of
registers. Otherwise, we'll get into a case where we copy with a Q type
and then offset with a D type and things get out of sync.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Previously, we tried to combine all cases where the instruction being
CSE'd writes to more than one MOV worth of registers into one case with
a bit of special casing for LOAD_PAYLOAD. This commit splits things so
that LOAD_PAYLOAD is entirely it's own case. This makes tweaking the
LOAD_PAYLOAD case simpler in the next commit.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Missing check for shader stage in the fs_visitor would corrupt the
cs_prog_data.push information and trigger crashes / corruption later
when uploading the CS state.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Surface reads don't need them because they just have the one address
payload. With surface writes, on the other hand, we can put the address
and the data in the different halves and avoid building the payload all
together.
The decrease in register pressure and added freedom in register
allocation resulting from this change reduces spilling enough to improve
the performance of one customer benchmark by about 2x.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
We're about to add some more if cases so let's have the giant re-indent
in it's own patch to make review easier.
Acked-by: Iago Toral Quiroga <itoral@igalia.com>
These have clearly never seen any use.... On gen8, the bottom 4 bits are
missing so we need to shift them off before we call set_bits and shift
again when we get the bits. Found by inspection.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Instead of fetching the information out of the instruction directly,
fetch the descriptor and then pluck the information out of the
descriptor. The current scheme works ok for SEND but with SENDS, it all
falls to pieces because the descriptor is completely shuffled around.
This commit doesn't actually convert everything. One notable exception
is URB messages which don't even use descriptors in emit_urb_WRITE yet.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
We want to be able to extract data from descriptors as well as unify a
bit of the descriptor construction.
One of the unifications we do is to unify the read/write and dataport
descriptors. On gen4-5, read/write are substantially different and the
read descriptors change between gen4 and gen4.x. On gen6, they unified
layouts between read, write, and dataport. Then, on gen8, they added
one bit to the message type field but left it reserved MBZ for
read/write messages. This commit chooses to treat that as if they
expanded the field everywhere and just didn't have enough enum values
for read/write to bother with the extra bit.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
This commit pulls the surface descriptor helpers out into brw_eu.h and
makes them no longer depend on the codegen infrastructure. This should
allow us to use them directly from the IR code instead of the generator.
This change is unfortunately less mechanical than perhaps one would like
but it should be fairly straightforward.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Instead of magically falling back to SIMD8 for atomics and typed
messages on Ivy Bridge, explicitly figure out the exec size and pass
that into brw_surface_payload_size.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Like all the other sends, it's just mlen * REG_SIZE.
Fixes: 3cbc02e469 "intel: Use TXS for image_size when we have..."
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
If you pass a bool in as the value to set, the C standard says that it
gets converted to an int prior to shifting. If you try to set a bool to
bit 31, this lands you in undefined behavior. It's better just to add
the explicit cast and let the compiler delete it for us.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
There are piles of fields that it doesn't check so using it is a lie.
The only reason why it's not causing problem is because it has exactly
one user which only uses it for MOV instructions (which aren't very
interesting) and only on Sandy Bridge and earlier hardware. Just get
rid of it and inline it in the one place that it's actually used.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Acked-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
emit_uniformize() emits SHADER_OPCODE_FIND_LIVE_CHANNEL with its
flag_subreg set, so that the IR knows which flag is accessed. However
the flag is only used on Gen7 in Align1 mode.
To avoid setting unnecessary bits in the instruction words, get the
information we need and reset the default flag register. This allows
round-tripping through the assembler/disassembler.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The docs are fairly incomplete and inconsistent about it, but this
seems to be the reason why half-float destinations are required to be
DWORD-aligned on BDW+ projects. This way the regioning lowering pass
will make sure that the destination components of W to HF and HF to W
conversions are aligned like the corresponding conversion operation
with 32-bit execution data type.
Tested-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
In some shaders, you can end up with a stride in the source of a
SHADER_OPCODE_MULH. One way this can happen is if the MULH is acting on
the top bits of a 64-bit value due to 64-bit integer lowering. In this
case, the compiler will produce something like this:
mul(8) acc0<1>UD g5<8,4,2>UD 0x0004UW { align1 1Q };
mach(8) g6<1>UD g5<8,4,2>UD 0x00000004UD { align1 1Q AccWrEnable };
The new region fixup pass looks at the MUL and sees a strided source and
unstrided destination and determines that the sequence is illegal. It
then attempts to fix the illegal stride by replacing the destination of
the MUL with a temporary and emitting a MOV into the accumulator:
mul(8) g9<2>UD g5<8,4,2>UD 0x0004UW { align1 1Q };
mov(8) acc0<1>UD g9<8,4,2>UD { align1 1Q };
mach(8) g6<1>UD g5<8,4,2>UD 0x00000004UD { align1 1Q AccWrEnable };
Unfortunately, this new sequence isn't correct because MOV accesses the
accumulator with a different precision to MUL and, instead of filling
the bottom 32 bits with the source and zeroing the top 32 bits, it
leaves the top 32 (or maybe 31) bits alone and full of garbage. When
the MACH comes along and tries to complete the multiplication, the
result is correct in the bottom 32 bits (which we throw away) and
garbage in the top 32 bits which are actually returned by MACH.
This commit does two things: First, it adds an assert to ensure that we
don't try to rewrite accumulator destinations of MUL instructions so we
can avoid this precision issue. Second, it modifies
required_dst_byte_stride to require a tightly packed stride so that we
fix up the sources instead and the actual code which gets emitted is
this:
mov(8) g9<1>UD g5<8,4,2>UD { align1 1Q };
mul(8) acc0<1>UD g9<8,8,1>UD 0x0004UW { align1 1Q };
mach(8) g6<1>UD g5<8,4,2>UD 0x00000004UD { align1 1Q AccWrEnable };
Fixes: efa4e4bc5f "intel/fs: Introduce regioning lowering pass"
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
For a long time, we based exec sizes on destination register widths.
We've not been doing that since 1ca3a94427 but a few remnants
accidentally remained.
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
The original idea was that the backend compiler could eliminate
surfaces, so we would have it mark which ones are actually used,
then shrink the binding table accordingly. Unfortunately, it's a
pretty blunt mechanism - it can only prune things from the end,
not the middle - since we decide the layout before we even start
the backend compiler, and only limit the size. It also basically
gives up if it sees indirect array access.
Besides, we do the vast majority of our surface elimination in NIR
anyway, not the backend - and I don't see that trend changing any
time soon. Vulkan abandoned this plan a long time ago, and I don't
use it in Iris, but it's still been kicking around in i965.
I hacked shader-db to print the binding table size in bytes, and
observed no changes with this patch. So, this code appears to do
nothing useful.
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
The num_components value passed into get_mul_for_src is used to only
compose the parts of the swizzle that we know will be used so we don't
compose invalid swizzle components. However, we had a bug where we
passed the number of components of the add all the way through. For the
given source, we need the number of components read from that source.
In the case where we have a narrow add, say 2 components, that is
sourced from a chain of wider instructions, we may not compose all the
swizzles. All we really need to do is pass through the right number of
components at each level.
Fixes: 2231cf0ba3 "nir: Fix output swizzle in get_mul_for_src"
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Shaders containing software implementations of double-precision
operations can be very large such that we cannot stack-allocate
an array of grf_count*16.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Shaders containing software implementations of double-precision
operations can be very large such that we have more the 2^16 virtual
registers during optimization.
Move the 'nr' field to the union containing the immediate storage and
expand it to 32-bits.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The next patch replaces an unsigned bitfield with a plain unsigned,
which triggers gcc to begin warning on signed/unsigned comparisons.
Keeping this patch separate from the actual move allows bisectablity and
generates no additional warnings temporarily.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
A follow on commit will move nr to the same union as the immediate
data, so we should assert these invariants before we overwrite the nr
field.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
A follow on patch will move the 'nr' field to the union containing the
immediate field, so prepare by checking that we're only testing these
assertions if the .file is correct.
The assertions with != ARF were kind of silly to begin with because the
<128 check is specifically only for things in the GRF.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
These are broken on a future platform, but it turns out we don't need
to fix them, since they're just type-converting moves with strided
source. Kill them.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
This legalization pass is meant to handle situations where the source
or destination regioning controls of an instruction are unsupported by
the hardware and need to be lowered away into separate instructions.
This should be more reliable and future-proof than the current
approach of handling CHV/BXT restrictions manually all over the
visitor. The same mechanism is leveraged to lower unsupported type
conversions easily, which obsoletes the lower_conversions pass.
v2: Give conditional modifiers the same treatment as predicates for
SEL instructions in lower_dst_modifiers() (Iago). Special-case a
couple of other instructions with inconsistent conditional mod
semantics in lower_dst_modifiers() (Curro).
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Currently the visitor attempts to enforce the regioning restrictions
that apply to double-precision instructions on CHV/BXT at NIR-to-i965
translation time. It is possible though for the copy propagation pass
to violate this restriction if a strided move is propagated into one
of the affected instructions. I've only reproduced this issue on a
future platform but it could affect CHV/BXT too under the right
conditions.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
I triggered this bug while prototyping code for a future platform on
IVB. Could be a problem today though if a strided move is
copy-propagated into a type-converting move with DF destination.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
This seems to be a problem in combination with the lower_regioning
pass introduced by a future commit, which can modify a SIMD-split
instruction causing its execution size to become illegal again. A
subsequent call to lower_simd_width() would hit this bug on a future
platform.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Align16 is no longer a thing, so a new implementation is provided
using Align1 instead. Not all possible swizzles can be represented as
a single Align1 region, but some fast paths are provided for
frequently used swizzles that can be represented efficiently in Align1
mode.
Fixes ~90 subgroup quad swap Vulkan CTS tests.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
lower_integer_multiplication() implements 32x32-bit multiplication on
some platforms by bit-casting one of the 32-bit sources into two
16-bit unsigned integer portions. This can give incorrect results if
the original instruction specified a source modifier. Fix it by
emitting an additional MOV instruction implementing the source
modifiers where necessary.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
the naming is a bit confusing no matter how you look at it. Within SPIR-V
"global" memory is memory accessible from all threads. glsl "global" memory
normally refers to shader thread private memory declared at global scope. As
we already use "shared" for memory shared across all thrads of a work group
the solution where everybody could be happy with is to rename "global" to
"private" and use "global" later for memory usually stored within system
accessible memory (be it VRAM or system RAM if keeping SVM in mind).
glsl "local" memory is memory only accessible within a function, while SPIR-V
"local" memory is memory accessible within the same workgroup.
v2: rename local to function as well
v3: rename vtn_variable_mode_local as well
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The following patches will add support for an additional
optimisation so this function will no longer just optimise varying
constants.
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
The former expects to see SSA-only things, but the latter injects registers.
The assertions in the lowering where not seeing this because they asserted
on the bit_size values only, not on the is_ssa field, so add that assertion
too.
Fixes: 11dc130779 "nir: Add a bool to int32 lowering pass"
CC: mesa-stable@lists.freedesktop.org
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
On some GPUs, especially older Intel GPUs, some math instructions are
very expensive. On those architectures, don't reduce flow control to a
csel if one of the branches contains one of these expensive math
instructions.
This prevents a bunch of cycle count regressions on pre-Gen6 platforms
with a later patch (intel/compiler: More peephole select for pre-Gen6).
v2: Remove stray #if block. Noticed by Thomas.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Thomas Helland <thomashelland90@gmail.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
That flow control may be trying to avoid invalid loads. On at least
some platforms, those loads can also be expensive.
No shader-db changes on any Intel platform (even with the later patch
"intel/compiler: More peephole select").
v2: Add a 'indirect_load_ok' flag to nir_opt_peephole_select. Suggested
by Rob. See also the big comment in src/intel/compiler/brw_nir.c.
v3: Use nir_deref_instr_has_indirect instead of deref_has_indirect (from
nir_lower_io_arrays_to_elements.c).
v4: Fix inverted condition in brw_nir.c. Noticed by Lionel.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
If there is a CMP.NZ that compares a single component (via a .zzzz
swizzle, for example) with 0, it can propagate its conditional modifier
back to a previous CMP that writes only that component. The specific
case that I saw was:
cmp.l.f0(8) g42<1>.xF g61<4>.xF (abs)g18<4>.zF
...
cmp.nz.f0(8) null<1>D g42<4>.xD 0D
In this case we can just delete the second CMP.
No changes on Broadwell or Skylake because they do not use the vec4
backend. Also no changes on GM45 or Iron Lake.
Sandy Bridge, Ivy Bridge, and Haswell had similar results. (Sandy Bridge shown)
total instructions in shared programs: 10856676 -> 10852569 (-0.04%)
instructions in affected programs: 228322 -> 224215 (-1.80%)
helped: 1331
HURT: 0
helped stats (abs) min: 1 max: 7 x̄: 3.09 x̃: 4
helped stats (rel) min: 0.11% max: 6.67% x̄: 1.88% x̃: 1.83%
95% mean confidence interval for instructions value: -3.19 -2.99
95% mean confidence interval for instructions %-change: -1.93% -1.83%
Instructions are helped.
total cycles in shared programs: 154788865 -> 154732047 (-0.04%)
cycles in affected programs: 2485892 -> 2429074 (-2.29%)
helped: 1097
HURT: 59
helped stats (abs) min: 2 max: 168 x̄: 51.96 x̃: 64
helped stats (rel) min: 0.12% max: 12.70% x̄: 3.44% x̃: 2.22%
HURT stats (abs) min: 2 max: 16 x̄: 3.02 x̃: 2
HURT stats (rel) min: 0.18% max: 0.83% x̄: 0.64% x̃: 0.71%
95% mean confidence interval for cycles value: -51.04 -47.26
95% mean confidence interval for cycles %-change: -3.40% -3.07%
Cycles are helped.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
The (-abs(x) >= 0) => (x == 0) optimization is removed from the vec4 and
scalar parts. In the VS part, adding the new pattern was not
helpful. The pattern that is removed is really old, and it has been
handled by NIR for ages.
All Gen7+ platforms had similar results. (Broadwell shown)
total instructions in shared programs: 14715715 -> 14715709 (<.01%)
instructions in affected programs: 474 -> 468 (-1.27%)
helped: 6
HURT: 0
helped stats (abs) min: 1 max: 1 x̄: 1.00 x̃: 1
helped stats (rel) min: 1.12% max: 1.35% x̄: 1.28% x̃: 1.35%
95% mean confidence interval for instructions value: -1.00 -1.00
95% mean confidence interval for instructions %-change: -1.40% -1.15%
Instructions are helped.
total cycles in shared programs: 559569911 -> 559569809 (<.01%)
cycles in affected programs: 5963 -> 5861 (-1.71%)
helped: 6
HURT: 0
helped stats (abs) min: 16 max: 18 x̄: 17.00 x̃: 17
helped stats (rel) min: 1.45% max: 1.88% x̄: 1.73% x̃: 1.85%
95% mean confidence interval for cycles value: -18.15 -15.85
95% mean confidence interval for cycles %-change: -1.95% -1.51%
Cycles are helped.
Iron Lake and Sandy Bridge had similar results. (Iron Lake shown)
total instructions in shared programs: 7780915 -> 7780913 (<.01%)
instructions in affected programs: 246 -> 244 (-0.81%)
helped: 2
HURT: 0
total cycles in shared programs: 177876108 -> 177876106 (<.01%)
cycles in affected programs: 3636 -> 3634 (-0.06%)
helped: 1
HURT: 0
GM45
total instructions in shared programs: 4799152 -> 4799151 (<.01%)
instructions in affected programs: 126 -> 125 (-0.79%)
helped: 1
HURT: 0
total cycles in shared programs: 122052654 -> 122052652 (<.01%)
cycles in affected programs: 3640 -> 3638 (-0.05%)
helped: 1
HURT: 0
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
In an instruction sequence like
cmp(8).ge.f0.0 vgrf17:D, vgrf2.xxxx:D, vgrf9.xxxx:D
(+f0.0) sel(8) vgrf1:UD, vgrf8.xyzw:UD, vgrf1.xyzw:UD
The other fields of vgrf17 may be unused, but the CMP still needs to
generate the other flag bits.
To my surprise, nothing in shader-db or any test suite appears to hit
this. However, I have a change to brw_vec4_cmod_propagation that
creates cases where this can happen. This fix prevents a couple dozen
regressions in that patch.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 5df88c20 ("i965/vec4: Rewrite dead code elimination to use live in/out.")
We also enable it in all of the NIR drivers.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This is a squash of a bunch of individual changes:
nir/builder: Generate 32-bit bool opcodes transparently
nir/algebraic: Remap Boolean opcodes to the 32-bit variant
Use 32-bit opcodes in the NIR producers and optimizations
Generated with a little hand-editing and the following sed commands:
sed -i 's/nir_op_ball_fequal/nir_op_b32all_fequal/g' **/*.c
sed -i 's/nir_op_bany_fnequal/nir_op_b32any_fnequal/g' **/*.c
sed -i 's/nir_op_ball_iequal/nir_op_b32all_iequal/g' **/*.c
sed -i 's/nir_op_bany_inequal/nir_op_b32any_inequal/g' **/*.c
sed -i 's/nir_op_\([fiu]lt\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]ge\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]ne\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]eq\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fi]\)ne32g/nir_op_\1neg/g' **/*.c
sed -i 's/nir_op_bcsel/nir_op_b32csel/g' **/*.c
Use 32-bit opcodes in the NIR back-ends
Generated with a little hand-editing and the following sed commands:
sed -i 's/nir_op_ball_fequal/nir_op_b32all_fequal/g' **/*.c
sed -i 's/nir_op_bany_fnequal/nir_op_b32any_fnequal/g' **/*.c
sed -i 's/nir_op_ball_iequal/nir_op_b32all_iequal/g' **/*.c
sed -i 's/nir_op_bany_inequal/nir_op_b32any_inequal/g' **/*.c
sed -i 's/nir_op_\([fiu]lt\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]ge\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]ne\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]eq\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fi]\)ne32g/nir_op_\1neg/g' **/*.c
sed -i 's/nir_op_bcsel/nir_op_b32csel/g' **/*.c
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
I needed the same function for v3d. This was originally in d3e046e76c
("nir: Pull some of intel's image load/store format conversion to
nir_format.h") before we made am istake about simplifying the function.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This reverts commit 06fbcd2cd5.
nir_pack_half_2x16_split *isn't* vectorizable, it's 1-component only, thus
why we had this split-scalar code in the first place.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The pass should work for all bit sizes but it's less clear that the
extra instructions are worth it on small integers. Also, the hardware
doesn't do mul_high on anything other than 32-bit integers and, absent
any decent mechanism for testing the pass on 8 and 16-bit types, it's
probably best to just leave it disabled for now.
Shader-db results on Sky Lake:
total instructions in shared programs: 15105795 -> 15111403 (0.04%)
instructions in affected programs: 72774 -> 78382 (7.71%)
helped: 0
HURT: 265
Note that hurt here actually means helped because we're getting rid of
integer quotient operations (which are a send on some platforms!) and
replacing them with fairly cheap ALU ops.
Reviewed-by: Ian Romanick ian.d.romanick@intel.com
I needed the same functions for v3d. Note that the color value in the
Intel lowering has already been cut down to image.chans num_components.
v2: Drop the half float one, since it was a 1-liner after cleanup.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The implementation of these opcodes in the generator assumes that their
arguments are packed, and it generates register regions based on that
assumption.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We have to lower some shadow instructions because they don't exist in
hardware and we have to lower txb+offset+clamp because the message gets
too big and we run into the sampler message length limit of 11 regs.
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
This simple check helps catch bugs early that can end up propagating
into later stages of the compile and triggering strange asserts.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
While disassembling the predicate always print flag subregister number
to keep grammar same across the generation for assembler tool.
v2: Combine consecutive format calls (Matt Turner)
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
When RepCtrl is set, the swizzle field is ignored by the hardware. In
order to ensure a 1-to-1 correspondence between the human-readable
disassembly and the binary instruction encoding always set the swizzle
to XXXX (all zeros) when it is unused due to RepCtrl
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Instead of a single i2b and b2i, we now have i2b32 and b2iN where N is
one if 8, 16, 32, or 64. This leads to having a few more opcodes but
now everything is consistent and booleans aren't a weird special case
anymore.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
This extension is not properly tested (testing for
GL_ARB_fragment_shader_interlock is not sufficient), and since this was
noted in review on August 28th no tests have been sent.
Revert "i965: Add INTEL_fragment_shader_ordering support."
Revert "mesa: Add GL/GLSL plumbing for INTEL_fragment_shader_ordering"
This reverts commit 03ecec9ed2.
This reverts commit 119435c877.
Cc: mesa-stable@lists.freedesktop.org
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Eric Anholt <eric@anholt.net>
Vulkan and Gallium don't use Mesa's gl_program data structure, so they
can't poke at 'prog'. But we can simply use the copy of the shader info
stored with the NIR shader, which is guaranteed to exist.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
This moves nir_shader_clone() to the driver-specific compile function,
rather than the shared src/intel/compiler code. This allows i965 to do
key-specific passes before calling brw_compile_*. Vulkan should not
need this cloning as it doesn't compile multiple variants.
We do need to continue cloning in the compute shader code because we
lower various things in NIR based on the SIMD width.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Meson test has a concepts of suites, which allow tests to be grouped
together. This allows for a subtest of tests to be run only (say only
the tests for nir). A test can be added to more than one suite, but for
the most part I've only added a test to a single suite, though I've
added a compiler group that includes nir, glsl, and glcpp tests.
To use this you'll need to invoke meson test directly, instead of ninja
test (which always runs all targets). it can be invoked as:
`meson test -C builddir --suite $suitename` (meson test has addition
options that are pretty useful).
Tested-By: Gert Wollny <gert.wollny@collabora.com>
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
The existing backend code assumed that if VARYING_SLOT_CLIP_DIST0
was written, then VARYING_SLOT_CLIP_DIST1 would be as well. That's
true with the current lowering, but not necessary if there are 4 or
fewer clip distances. Separate out the checks to allow this.
The new NIR-based lowering will trigger this case, which would have
caused backend validation errors (src is null) without this patch.
Reviewed-by: Eric Anholt <eric@anholt.net>
../src/intel/compiler/brw_fs_nir.cpp:3534:46: warning: comparison of integer expressions of different signedness: ‘unsigned int’ and ‘int’ [-Wsign-compare]
assert(nir_intrinsic_write_mask(instr) ==
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~
(1 << instr->num_components) - 1);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This was caused by 6339aba775 which added these completely valid
checks. However clang likes to complain about signedness mismatches.
Fixes: 6339aba775 "intel/compiler: Lower SSBO and shared..."
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
It's not at all intel-specific; the formula is dictated by OpenGL and
Vulkan. The only intel-specific thing is that we need the lowering. As
a nice side-effect, the new version is variable-group-size ready.
Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>
We have a bunch of code to do this in the back-end compiler but it's
fairly specific to typed surface messages and the way we emit them.
This breaks it out into NIR were it's easier to do things a bit more
generally. It also means we can easily share the code between the vec4
and FS back-ends if we wish.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Both BRW_SFID_SAMPLER and GEN6_SFID_DATAPORT_SAMPLER_CACHE are getting
disassembled as "sampler", which is misleading for assembler tool.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Some hardware supports source mods only for float operations. Make it
possible to skip lowering to source mods in these cases.
v2: use option flags instead of a boolean (Jason Ekstrand)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This can occur during payload setup of SIMD-split send message
instructions, which can lead to the emission of header setup
instructions with a non-zero channel group and fixed SIMD width. Such
instructions could end up using undefined channel enable signals
except they don't care since they're always marked force_writemask_all.
Not known to affect correctness of any workload at this point, but it
would be trivial to back-port to stable if something comes up.
Reported-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Tested-by: Sagar Ghuge <sagar.ghuge@intel.com>
SIMD16 instructions need to have additional interferences to prevent
source / destination hazards when the source and destination registers
are off by one register.
While we already have code to handle this, it was only running for SIMD16
dispatches, however, we can have SIDM16 instructions in a SIMD8 dispatch.
An example of this are pull constant loads since commit b56fa830c6,
but there are more cases.
This fixes a number of CTS test failures found in work-in-progress
tests that were hitting this situation for 16-wide pull constants
in a SIMD8 program.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
As of this commit, all uses of const sources either go through a
nir_src_as_<type> helper which handles bit sizes correctly or else are
accompanied by a nir_src_bit_size() == 32 assertion to assert that we
have the size we think we have.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
As of this commit, all uses of const sources either go through a
nir_src_as_<type> helper which handles bit sizes correctly or else are
accompanied by a nir_src_bit_size() == 32 assertion to assert that we
have the size we think we have.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Everywhere we handle SSBO intrinsics, we have exactly the same pattern
for computing the index so we may as well make a helper for it. We also
add a get_nir_src_imm to vec4 and use it for SSBO offsets.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This isn't true for Vulkan so we have to whack it to "main" in anv which
is silly. Instead of walking the list of functions and asserting that
everything is named "main" and hoping there's only one function named
"main", just use the nir_shader_get_entrypoint() helper which has better
assertions anyway.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
While disassembling send(c) instruction print message descriptor as
immediate source operand along with message descriptor. This allows
assembler to read immediate source operand and set bits accordingly.
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
While encoding the immediate floating point values in instruction we use
values upto precision 9, but while disassembling, we print precision to
6 places, which round up the value and gives wrong interpretation for
encoded immediate constant.
To avoid misinterpretation of encoded immediate values in instruction
and disassembled output, print hex representation along with floating
point value which can be used by assembler in future.
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
To have uniform behavior while disassembling send(c) instruction use
register type of unsigned doubleword for src1 when message descriptor is
immediate value. Bspec does not specifiy anything for src1 immediate
default type.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
This is valid NIR but you can't actually hit this case today. GLSL IR
doesn't have a bool to double opcode; it does f2d(b2f(x)). In SPIR-V we
don't have any to/from bool conversion opcodes at all. However, the
next commit will make us start generating it so we should be ready.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Several of the Atom GPUs have additional restrictions on alignment when
moving < 64-bit source to a 64-bit destination. All of the nir_op_*2*64
code generation paths respected this, but nir_op_b2[fi] did not.
Previous to commit a68dd47b91 it was not possible to generate such an
instruction from the GLSL path. It may have been possible from SPIR-V,
but it's not clear. The aforementioned patch converts a 64-bit
nir_op_fsign into a sequence of operations including a nir_op_b2f with a
64-bit result. This "just works" everywhere except these Atom parts.
This problem was not detected during normal CI testing because the Atom
parts are not included in developer builds.
v2 (idr): Make the patch compile, and make some cosmetic changes. Add a
commit message.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108319
Fixes: a68dd47b91 "nir/algebraic: Simplify fsat of fsign"
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Whiskey Lake uses the same gen graphics as Coffe Lake, including some
ids that were previously marked as reserved on Coffe Lake, but that
now are moved to WHL page.
This follows the ids and approach used on kernel's commit
b9be78531d27 ("drm/i915/whl: Introducing Whiskey Lake platform")
and commit c1c8f6fa731b ("drm/i915: Redefine some Whiskey Lake SKUs")
v2: Lionel noticed that GT{1,2,3} on kernel wasn't following
spec when looking to number of EUs, so kernel has been updated.
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Anuj Phogat <anuj.phogat@gmail.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This fixes a bug uncovered by my NIR integer division by constant
optimization series.
Fixes: 19f9cb72c8 "i965/fs: Add pass to propagate conditional..."
Fixes: 627f94b72e "i965/vec4: adding vec4_cmod_propagation..."
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
No shader-db or CI changes on any Intel platform.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Thomas Helland <thomashelland90@gmail.com>
This fixes a bunch of Vulkan subgroup tests on little core platforms.
Fixes: 4150920b95 "intel/fs: Add a helper for emitting scan operations"
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Tested-by: Mark Janes <mark.a.janes@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
No shader-db changes on any Intel platform... which probably explains
why no bugs have been bisected to this problem since it landed in Mesa
18.1. :( The commit mentioned below is in 18.2, so 18.1 would need a
slightly different fix (due to code refactoring).
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Fixes: 77f269bb56 "i965/fs: Refactor propagation of conditional modifiers from compares to adds"
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com> (reviewed the original patch)
Cc: Matt Turner <mattst88@gmail.com> (reviewed the original patch)
and _mesa_bitcount_64 with util_bitcount_64. This fixes a build problem
in nir for platforms that don't have popcount or popcountll, such as
32bit msvc.
v2: - Fix additional uses of _mesa_bitcount added after this was
originally written
Acked-by: Eric Engestrom <eric.engestrom@intel.com> (v1)
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
It was very inconsistently handled; the only things that made use of it
were glsl_to_nir, glspirv, and nir_gather_info. In particular,
nir_lower_io completely ignored it so anyone using nir_lower_io on
64-bit vertex attributes was going to be in for a shock. Also, as of
the previous commit, it's set by every driver that supports 64-bit
vertex attributes. There's no longer any reason to have it be an option
so let's just delete it.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Unused since 09f1de97a7 "anv,i965: Lower away image derefs in
the driver".
Cc: Jason Ekstrand <jason.ekstrand@intel.com>
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
This is the second patch needed to fix the following piglit tests:
tests/spec/arb_gl_spirv/linker/uniform/multisampler.shader_test
tests/spec/arb_gl_spirv/linker/uniform/multisampler-array.shader_test
Although in this case it doesn't affect so many borrowed tests, as
there aren't too many tests using multisamplers on Intel.
It is worth to note that this patch is also needed when those tests
are run on GLSL mode (using the --glsl option). Although most Intel
drivers would not be able to run/execute tests using multisamplers, as
GL_MAX_IMAGE_SAMPLES is zero, technically those tests are expected to
link correctly, so linking tests should pass.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
To brw_nir_lower_gl_images, as it will be also used on the
ARB_gl_spirv codepath, that doesn't involves GLSL at all. So the
lowering is about images following the OpenGL semantics. In any case
"brw_nir_lower_opengl_images" seemed too long to me, so I just used
gl. That shortening is already used on other parts of the code.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
As of 07a2098a70, brw_nir_optimize calls nir_remove_dead_variables as
the last optimization. Doing it again is just pointless.
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
We're hitting an assert in gfxbench because one of the local variable
is a sampler (according to Jason this isn't valid) :
testfw_app: ../src/compiler/nir_types.cpp:551: void glsl_get_natural_size_align_bytes(const glsl_type*, unsigned int*, unsigned int*): Assertion `!"type does not have a natural size"' failed.
Since this particular variable isn't used, it can be eliminated by
removing unused local variables at the end of the optimization loop.
This makes sense also for valid local variables.
v2: Move additional local variable removal out of optimization loop,
but before large constant removal (Jason/Lionel)
v3: Move the removal at the end of brw_nir_optimize()
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107806
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Page 190 of "Volume 7: 3D Media GPGPU Engine (Haswell)" says the valid
range of the offset is [0, 0FFFFFFFh].
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: mesa-stable@lists.freedesktop.org
Fixes failure in the new piglit test
tes-patch-input-array-vec2-index-invalid-rd.shader_test.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: mesa-stable@lists.freedesktop.org
Amber Lake uses the same gen graphics as Kaby Lake, including a id
that were previously marked as reserved on Kaby Lake, but that
now is moved to AML page.
This follows the ids and approach used on kernel's commit
e364672477a1 ("drm/i915/aml: Introducing Amber Lake platform")
Reported-by: Timo Aaltonen <timo.aaltonen@canonical.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Anuj Phogat <anuj.phogat@gmail.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This fixes the GL_ARB_fragment_shader_interlock piglit test on gen8
platforms where the lack of metadata dirtying was causing another pass
to accidentally delete a much needed loop.
https://bugs.freedesktop.org/show_bug.cgi?id=107745
Fixes: 37f7983bcc "intel/compiler: Do image load/store lowering..."
Jason Ekstrand <jason@jlekstrand.net> writes:
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Now that the drivers are lowering to surface indices themselves, we no
longer need to push the surface index into the shader.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Previously, the back-end compiler turn image access into magic uniform
reads and there was a complex contract between back-end compiler and
driver about setting up and filling out those params. As of this
commit, both drivers now lower image_deref_load_param_intel intrinsics
to load_uniform intrinsics controlled by the driver and lower the other
image_deref_* intrinsics to image_* intrinsics which take an actual
binding table index. There are still "magic" uniforms but they are now
added and controlled entirely by the driver and that contract no longer
spans components.
This also has the side-effect of making most image use compile-time
binding table indices. Previously, all image access pulled the binding
table index from a uniform. Part of the reason for this was that the
magic uniforms made it difficult to decouple binding table indices from
the uniforms and, since they are indexed completely differently
(especially in Vulkan), it was hard to pull them apart. Now that the
driver is handling both, it's trivial to decouple the two and provide
actual binding table indices.
Shader-db results on Kaby Lake:
total instructions in shared programs: 15166872 -> 15164293 (-0.02%)
instructions in affected programs: 115834 -> 113255 (-2.23%)
helped: 191
HURT: 0
total cycles in shared programs: 571311495 -> 571196465 (-0.02%)
cycles in affected programs: 4757115 -> 4642085 (-2.42%)
helped: 73
HURT: 67
total spills in shared programs: 10951 -> 10926 (-0.23%)
spills in affected programs: 742 -> 717 (-3.37%)
helped: 7
HURT: 0
total fills in shared programs: 22226 -> 22201 (-0.11%)
fills in affected programs: 1146 -> 1121 (-2.18%)
helped: 7
HURT: 0
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This commit expands the current memory access enum to contain the extra
two bits provided for images. We choose to follow the SPIR-V convention
of NonReadable and NonWriteable because readonly implies that you *can*
read so readonly + writeonly doesn't make as much sense as NonReadable +
NonWriteable.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Having the array length component stored in .z was a small convenience
for the ISL image param filling code and an annoyance in the NIR
lowering code. The only convenience of treating 1D arrays like 2D
arrays in the lowering code is in the address calculation code so let's
put all the complexity there as well.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This commit moves our storage image format conversion codegen into NIR
instead of doing it in the back-end. This has the advantage of letting
us run it through NIR's optimizer which is pretty effective at shrinking
things down. In the common case of rgba8, the number of instructions
emitted after NIR is done with it is half of what it was with the
lowering happening in the back-end. On the downside, the back-end's
lowering is able to directly use predicates and the NIR lowering has to
use IFs.
Shader-db results on Kaby Lake:
total instructions in shared programs: 15166910 -> 15166872 (<.01%)
instructions in affected programs: 5895 -> 5857 (-0.64%)
helped: 15
HURT: 0
Clearly, we don't have that much image_load_store happening in the
shaders in shader-db....
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
No shader-db changes on any Intel platform.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
This greatly simplifies the next patch.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
All of the other brw_*_desc functions take a devinfo parameter, and all
of the others at least have an assert that uses it. Keep the parameter,
but mark it as unused.
Silences 37 warnings like:
In file included from src/intel/common/gen_disasm.c:27:0:
src/intel/compiler/brw_eu.h: In function ‘brw_pixel_interp_desc’:
src/intel/compiler/brw_eu.h:377:53: warning: unused parameter ‘devinfo’ [-Wunused-parameter]
brw_pixel_interp_desc(const struct gen_device_info *devinfo,
^~~~~~~
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Adds suppport for INTEL_fragment_shader_ordering. We achieve
the fragment ordering by using the same instruction as for
beginInvocationInterlockARB() which is by issuing a memory
fence via sendc.
Signed-off-by: Kevin Rogovin <kevin.rogovin@intel.com>
Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>
INTEL_DEBUG=hex prints 32 bit hex value and due to endianness of CPU
byte order is reversed. In order to disassemble binary files, print
each byte instead of 32 bit hex value.
v2: Print blank spaces in order to vertically align output of compacted
instructions hex value with uncompacted instructions hex value.
(Matt Turner)
v3: Fix line wrap at correct length
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
We have to be a bit careful with this one because we want it to run in
the optimization loop but only in the first brw_nir_optimize call.
Later calls assume that we've lowered away copy_deref instructions and
we don't want to introduce any more.
Shader-db results on Kaby Lake:
total instructions in shared programs: 15176942 -> 15176942 (0.00%)
instructions in affected programs: 0 -> 0
helped: 0
HURT: 0
In spite of the lack of any shader-db improvement, this patch completely
eliminates spilling in the Batman: Arkham City tessellation shaders.
This is because we are now able to detect that the temporary array
created by DXVK for storing TCS inputs is a copy of the input arrays and
use indirect URB reads instead of making a copy of 4.5 KiB of input data
and then indirecting on it with if-ladders.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Shader-db results on Kaby Lake:
total instructions in shared programs: 15177605 -> 15176765 (<.01%)
instructions in affected programs: 4259 -> 3419 (-19.72%)
helped: 1
HURT: 0
total spills in shared programs: 10954 -> 10855 (-0.90%)
spills in affected programs: 295 -> 196 (-33.56%)
helped: 1
HURT: 0
total fills in shared programs: 22222 -> 22117 (-0.47%)
fills in affected programs: 417 -> 312 (-25.18%)
helped: 1
HURT: 0
The helped shader is from the OglCSDof synmark test. On my Kaby Lake
laptop, the actual framerate of the benchmark didn't appear to improve
beyond the noise.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
We call structure splitting once because it is guaranteed to split all
the structures in the entire shader in one go. We call array splitting
in the loop in case future optimizations turn indirects into direct
dereferences and we can split more arrays.
Shader-db results on Kaby Lake:
total instructions in shared programs: 15177605 -> 15177605 (0.00%)
instructions in affected programs: 0 -> 0
helped: 0
HURT: 0
This is unsurprising because nir_lower_vars_to_ssa already effectively
does structure and array splitting internally. It doesn't actually
split the variables but it's ability to reason about aliasing in the
presence of arrays and structures and pick out scalars or vectors to be
lowered to SSA values is fairly advanced.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
v2: Split changes to the message type field to another patch. Suggested
by Caio.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
This is necessary for a new Gen9 message type that will be added in the
next patch. There are also Gen8 message types that need the extra bit
(mostly for bindless).
v2: Split off from the next patch. Suggested by Caio.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Commit 4434591bf5 caused substantially more URB messages in
geometry and tessellation shaders. Before we can really enable this
sort of optimization, We either need some way of combining them back
together into vectors or we need to do cross-stage vector element
elimination without splitting everything into scalars.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107510
Fixes: 4434591bf5 "intel/nir: Call nir_lower_io_to_scalar_early"
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Mark Janes <mark.a.janes@intel.com>
Now that all the build scripts are compatible with both Python 2 and 3,
we can flip the switch and tell Meson to use the latter.
Since Meson already depends on Python 3 anyway, this means we don't need
two different Python stacks to build Mesa.
Signed-off-by: Mathieu Bridon <bochecha@daitauha.fr>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
When the SIMD16 Gen4-5 fragment shader payload contains source depth
(g2-3), destination stencil (g4), and destination depth (g5-6), the
single register of stencil makes the destination depth unaligned.
We were generating this instruction in the RT write payload setup:
mov(16) m14<1>F g5<8,8,1>F { align1 compr };
which is illegal, instructions with a source region spanning more than
one register need to be aligned to even registers. This is because the
hardware implicitly does (nr | 1) instead of (nr + 1) when splitting the
compressed instruction into two mov(8)'s.
I believe this would cause the hardware to load g5 twice, replicating
subspan 0-1's destination depth to subspan 2-3. This showed up as 2x2
artifact blocks in both TIS-100 and Reicast.
Normally, we rely on the register allocator to even-align our virtual
GRFs. But we don't control the payload, so we need to lower SIMD widths
to make it work. To fix this, we teach lower_simd_width about the
restriction, and then call it again after lower_load_payload (which is
what generates the offending MOV).
Fixes: 8aee87fe4c (i965: Use SIMD16 instead of SIMD8 on Gen4 when possible.)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107212
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=13728
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Tested-by: Diego Viola <diego.viola@gmail.com>
During code review, Jason pointed out that:
2b3064c073 "i965, anv: Use INTEL_DEBUG for disk_cache driver flags"
Didn't account for INTEL_SCALER_* environment variables.
To fix this, let the compiler return the disk_cache driver flags.
Another possible fix would be to pull the INTEL_SCALER_* into
INTEL_DEBUG bits, but as we are currently using 41 of 64 bits, I
didn't think it was a good use of 4 more of these bits. (5 since
INTEL_PRECISE_TRIG needs to be accounted for as well.)
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Instead of just looking at the number of color attachments, look at
which ones are actually used by the subpass. This lets us potentially
throw away chunks of the fragment shader. In DXVK, for example, all
subpasses have 8 attachments and most are VK_ATTACHMENT_UNUSED so this
is very helpful in that case.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
The NIR nir_lower_io_arrays_to_elements pass attempts to split I/O
variables which are arrays or matrices into a sequence of separate
variables. This can help link-time optimization by allowing us to
remove varyings at a more granular level.
Shader-db results on Kaby Lake:
total instructions in shared programs: 15177645 -> 15168494 (-0.06%)
instructions in affected programs: 79857 -> 70706 (-11.46%)
helped: 392
HURT: 0
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Otherwise, only the first vec4 of a matrix or other complex type will
get marked as flat and we'll interpolate the others. This was caught by
a dEQP test which started failing because it did a SSO vs. non-SSO
comparison. Previously, we did the interpolation wrong consistently in
both versions. However, with one of Tim Arceri's NIR linkingpatches, we
started splitting the matrix input into vectors at link time in the
non-SSO version and it started getting correctly interpolated which
didn't match the broken SSO version. As of this commit, they both get
correctly interpolated.
Fixes: e61cc87c75 "i965/fs: Add a flat_inputs field to prog_data"
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
The hardware doesn't support byte immediates, so similar to setup_imm_df()
for doubles, these helpers work by loading the constant value into a
VGRF.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The pass can create a temporary result for the instruction and then
moves from it to the original destination, however, if the original
instruction was predicated, the mov has to be predicated as well.
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Until now, we had separate passes for lowering gl_PatchVerticesIn to
a statically known constant (for TES inputs when linked against a TCS),
and a uniform in the other cases. Annoyingly, one had to be run before
nir_lower_system_values, and the other afterward. This simplified the
passes, but made life painful for the callers.
This patch combines both into a single pass. If you give it a non-zero
static count, it uses that. If you give it Mesa state slots, it turns
it back into a built-in uniform. Otherwise, it does nothing.
This also moves the i965 uniform lowering out to shared code.
v2: Make token arrays const.
Reviewed-by: Eric Anholt <eric@anholt.net>
These are lowered by brw_nir_lower_vs_inputs(). If they weren't, we
would have already hit the unreachable() in emit_system_values_block().
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
we need rounding modes on other conversions involving floats and it is easier
to rename f2f16_undef than renaming all the other ones.
v2: rebased on master
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
The original pass only looked for load_uniform intrinsics but there are
a number of other places that could end up loading a push constant. One
obvious omission was images which always implicitly use a push constant.
Legacy VS clip planes also get pushed into the shader. This fixes some
new Vulkan CTS tests that test random combinations of bindings and, in
particular, test lots of UBOs and images together.
Cc: mesa-stable@lists.freedesktop.org
Cc: Kenneth Graunke <kenneth@whitecape.org>
Explicitly convert to signed integer. Conversion is valid since is the
same (implicitly) used to initialize the loop. Avoids the warning:
../../src/intel/compiler/brw_fs.cpp: In member function ‘bool fs_visitor::lower_simd_width()’:
../../src/intel/compiler/brw_fs.cpp:5761:45: warning: comparison of integer expressions of different signedness: ‘int’ and ‘unsigned int’ [-Wsign-compare]
split_inst.eot = inst->eot && i == n - 1;
~~^~~~~~~~
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
At 232ed89802 "i965/fs: Register allocator
shoudn't use grf127 for sends dest" we didn't take into account the case
of SEND instructions that are not send_from_grf. But since Gen7+ although
the backend still uses MRFs internally for sends they are finally
assigned to a GRFs.
In the case of unspills the backend assigns directly as source its
destination because it is suppose to be available. So we always have a
source-destination overlap. If the reg_allocator assigns registers that
include the grf127 we fail the validation rule that affects Gen8+
"r127 must not be used for return address when there is a src and dest
overlap in send instruction."
So this patch activates the grf127_send_hack_node for Gen8+ and if we
have any register spilled we add interferences to the destination of
the unspill operations.
We also need to avoid that opt_bank_conflicts() optimization, that runs
after the register allocation, doesn't move things around, causing the
grf127 to be used in the condition we were avoiding.
Fixes piglit test tests/spec/arb_compute_shader/linker/bug-93840.shader_test
and some shader-db crashed because of the grf127 validation rule..
v2: make sure that opt_bank_conflicts() optimization doesn't change
the use of grf127. (Caio)
Found by Caio Marcelo de Oliveira Filho
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107193
Fixes: 232ed89802 "i965/fs: Register allocator shoudn't use grf127 for sends dest"
Cc: 18.1 <mesa-stable@lists.freedesktop.org>
Cc: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
There are a number of opcode_desc table entries for many of these
unused opcodes. A symbolic opcode enum will be required in a future
commit in order to keep them in the opcode description tables. The
alternative would be to remove the unused opcodes from the opcode
description tables.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This makes the message length available at the IR level, which should
save some guesswork in a future commit.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Constructing a descriptor in-place as part of the immediate of an ALU
instruction is no longer supported.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The return value is not used anymore. This allows simplifying the
code slightly, and in addition it should frustrate anybody's attempts
to continue using the obsolete piecemeal approach to construct a
message descriptor in combination with brw_send_indirect_message().
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
All users of brw_send_indirect_surface_message() should be providing a
full descriptor immediate up front by now, this isn't necessary
anymore.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The current approach of returning a setup instruction where additional
descriptor fields can be specified is still supported in order to keep
things working, but it will be removed later in this series.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This replaces brw_set_message_descriptor() with the composition of
brw_set_desc() and a new inline helper function that packs the common
message descriptor controls into an integer. The goal is to represent
all message descriptors as a 32-bit integer which is written at once
into the instruction, which is more flexible (SENDS anyone?), robust
(see d2eecf0b0b fixing an issue
ultimately caused by some bits of the extended message descriptor
being left undefined) and future-proof than the current approach of
specifying the individual descriptor fields directly into the
instruction.
This approach also seems more self-documenting, since it will allow
removing calls to functions with way too many arguments like
brw_set_*_message() and brw_send_indirect_message(), and instead
provide a single descriptor argument constructed from an appropriate
combination of brw_*_desc() helpers.
Note that because brw_set_message_descriptor() was (conditionally?)
overriding fields of the instruction which strictly speaking weren't
part of the message descriptor, this involves calling
brw_inst_set_sfid() and brw_inst_set_eot() in some cases in addition
to brw_set_desc().
v2: Use SET_BITS macro instead of left shift (Ken).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Allows to specify a bitfield based on its upper and lower bounds
instead of a symbolic field definition, kind of what the current
GET_BITS macro is to GET_FIELD.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This introduces helpers that can be used to specify or extract the
whole descriptor of a SEND message instruction at once. Because the
the instruction encoding of these is rather awkward on some
generations using the generic brw_inst.h macros doesn't seem like an
option.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Until now we have assumed that we could skip emitting these barriers
in the general case based on empirical testing and a few assumptions
detailed in a comment in the driver code, however, recent CTS tests
have showed that we actually need them to produce correct behavior.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
When the destination is a BYTE type allow raw movs
even if the stride is not exact multiple of destination
type and exec type, execution type is Word and its size is 2.
This restriction was only allowing stride==2 destinations
for 8-bit types.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Since Gen8+ Intel PRM states that "r127 must not be used for return
address when there is a src and dest overlap in send instruction."
This patch implements this restriction creating new grf127_send_hack_node
at the register allocator. This node has a fixed assignation to grf127.
For vgrf that are used as destination of send messages we create node
interfereces with the grf127_send_hack_node. So the register allocator
will never assign to these vgrf a register that involves grf127.
If dispatch_width > 8 we don't create these interferences to the because
all instructions have node interferences between sources and destination.
That is enough to avoid the r127 restriction.
This fixes CTS tests that raised this issue as they were executed as SIMD8:
dEQP-VK.spirv_assembly.instruction.graphics.8bit_storage.8struct_to_32struct.storage_buffer_*int_geom
Shader-db results on Skylake:
total instructions in shared programs: 7686798 -> 7686797 (<.01%)
instructions in affected programs: 301 -> 300 (-0.33%)
helped: 1
HURT: 0
total cycles in shared programs: 337092322 -> 337091919 (<.01%)
cycles in affected programs: 22420415 -> 22420012 (<.01%)
helped: 712
HURT: 588
Shader-db results on Broadwell:
total instructions in shared programs: 7658574 -> 7658625 (<.01%)
instructions in affected programs: 19610 -> 19661 (0.26%)
helped: 3
HURT: 4
total cycles in shared programs: 340694553 -> 340676378 (<.01%)
cycles in affected programs: 24724915 -> 24706740 (-0.07%)
helped: 998
HURT: 916
total spills in shared programs: 4300 -> 4311 (0.26%)
spills in affected programs: 333 -> 344 (3.30%)
helped: 1
HURT: 3
total fills in shared programs: 5370 -> 5378 (0.15%)
fills in affected programs: 274 -> 282 (2.92%)
helped: 1
HURT: 3
v2: Avoid duplicating register classes without grf127. Let's use a node
with a fixed assignation to grf127 and create interferences to send
message vgrf destinations. (Eric Anholt)
v3: Update reference to CTS VK_KHR_8bit_storage failing tests.
(Jose Maria Casanova)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: 18.1 <mesa-stable@lists.freedesktop.org>
Implement at brw_eu_validate the restriction from Intel Broadwell PRM,
vol 07, section "Instruction Set Reference", subsection "EUISA
Instructions", Send Message (page 990):
"r127 must not be used for return address when there is a src and
dest overlap in send instruction."
v2: Style fixes (Matt Turner)
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: 18.1 <mesa-stable@lists.freedesktop.org>
This helps us to compact original instruction:
mul(8) g3<1>D g6<8,8,1>UD 0x00000006UD { align1 1Q };
So now we emit:
mul(8) g3<1>UD g6<8,8,1>UD 0x00000006UD { align1 1Q compacted };
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
At the time of commit 7bc6e455e2 (i965: Add support for saturating
immediates.) we thought mixed type saturates would be impossible. We
were only thinking about type converting moves from D to F, for
example. However, type converting moves w/saturate from F to DF are
definitely possible. This change minimally relaxes the restriction to
allow cases that I have been able trigger via piglit tests.
Fixes new piglit tests:
- arb_gpu_shader_fp64/execution/built-in-functions/fs-sign-sat-neg-abs.shader_test
- arb_gpu_shader_fp64/execution/built-in-functions/vs-sign-sat-neg-abs.shader_test
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
This is achived by copying the sign(abs(x)) optimization from the FS
backend.
On Gen7 an earlier platforms, this fixes new piglit tests:
- glsl-1.10/execution/vs-sign-neg-abs.shader_test
- glsl-1.10/execution/vs-sign-sat-neg-abs.shader_test
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
In Python 2, `print` was a statement, but it became a function in
Python 3.
Using print functions everywhere makes the script compatible with Python
versions >= 2.6, including Python 3.
Signed-off-by: Mathieu Bridon <bochecha@daitauha.fr>
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Dylan Baker <dylan@pnwbakers.com>
The bug fixed by the previous commit went undetected because extra
stderr messages are not flagged by the CI. Copy the solution from
fs_visitor::nir_emit_instr and mark the default case unreachable.
An alternate solution is to delete the default case so that the compiler
will issue a warning. That may require more work since there are other
(impossible) cases that exist.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Some of the lowering passes, nir_lower_locals_to_regs for example, can
cause some previously live code to be dead. This pass in particular
leaves a bunch of nir_instr_type_deref instructions floating around.
This causes shader-db runs on Gen5 through Haswell to spew tons of
messages like:
VS instruction not yet implemented by NIR->vec4
UnrealEngine4/EffectsCaveDemo/239.shader_test is one shader that
generates these messages. Cleaning up the dead code fixes that.
To verify, I did a shader-db before and after. Even though all the
messages are gone, the results make my brain hurt. :(
Haswell
total cycles in shared programs: 411890163 -> 411891145 (<.01%)
cycles in affected programs: 57016 -> 57998 (1.72%)
helped: 3
HURT: 11
helped stats (abs) min: 2 max: 154 x̄: 96.67 x̃: 134
helped stats (rel) min: 0.08% max: 2.23% x̄: 1.42% x̃: 1.96%
HURT stats (abs) min: 18 max: 686 x̄: 115.64 x̃: 20
HURT stats (rel) min: 0.81% max: 7.12% x̄: 1.87% x̃: 0.93%
95% mean confidence interval for cycles value: -51.39 191.67
95% mean confidence interval for cycles %-change: -0.14% 2.46%
Inconclusive result (value mean confidence interval includes 0).
Ivy Bridge
total cycles in shared programs: 259114802 -> 259115032 (<.01%)
cycles in affected programs: 24034 -> 24264 (0.96%)
helped: 1
HURT: 9
helped stats (abs) min: 2 max: 2 x̄: 2.00 x̃: 2
helped stats (rel) min: 0.08% max: 0.08% x̄: 0.08% x̃: 0.08%
HURT stats (abs) min: 18 max: 48 x̄: 25.78 x̃: 20
HURT stats (rel) min: 0.80% max: 1.94% x̄: 1.08% x̃: 0.80%
95% mean confidence interval for cycles value: 12.42 33.58
95% mean confidence interval for cycles %-change: 0.54% 1.38%
Cycles are HURT.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Fixes: 5a02ffb733 nir: Rework lower_locals_to_regs to use deref instructions
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
In 6f5abf3146 this code was fixed to calculate the maximum size of
an attribute in a seperate pass and then allocate the registers to
that size. However this wasn’t taking into account ranges that overlap
but don’t have the same starting location. For example:
layout(location = 0, component = 0) out float a[4];
layout(location = 2, component = 1) out float b[4];
Previously, if ‘a’ was processed first then it would allocate a
register of size 4 for location 0 and it wouldn’t allocate another
register for location 2 because it would already be covered by the
range of 0. Then if something tries to write to b[2] it would try to
write past the end of the register allocated for ‘a’ and it would hit
an assert.
This patch changes it to scan for any overlapping ranges that start
within each range to calculate the maximum extent and allocate that
instead.
Fixed Piglit’s arb_enhanced_layouts/execution/component-layout/
vs-fs-array-interleave-range.shader_test
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Fixes: 6f5abf3146 "i965: Fix output register sizes when multiple variables
share a slot."
Ian Romanick
Matt Turner
Jason Ekstrand
Lionel Landwerlin
Kasireddy, Vivek
Francisco Jerez
Kenneth Graunke
Eric Anholt
Tapani Pälli
Caio Marcelo de Oliveira Filho
Oscar Blumberg
Karol Herbst
Timothy Arceri
Iago Toral Quiroga
Sagar Ghuge
Dylan Baker
Gert Wollny
Eric Engestrom
Topi Pohjolainen
Rodrigo Vivi
Alejandro Piñeiro
Kevin Rogovin
Mathieu Bridon
Jordan Justen
Jose Maria Casanova Crespo
Neil Roberts