st/mesa will expose GL_ARM_shader_framebuffer_fetch_depth_stencil
if this new capability is supported by the driver.
Signed-off-by: Pavel Asyutchenko <sventeam@yandex.ru>
Reviewed-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13979>
this is for drivers like zink that may or may not
handle dithering and so getting blend state changes
when this state changes isn't useful
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17043>
piglit select tests fail, so add a gallium cap to disable
for crocus explicitly.
crocus may choose to enable hardware select only for GPU
SKU which tested to be OK again.
Fixes: 6489af145c ("mesa: enable HardwareAcceleratedSelect")
Closes: #6644
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16955>
This is a clearer name for what it does than MUL_ZERO_WINS, and matches up
to the new name in shader_info.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16176>
When lower_wpos_pntc is used, the state tracker inserts code to
transform gl_PointCoord.y according to a uniform, to account for
API-requested point coordinate origin and framebuffer orientation. With
the transformation, driver-supplied point coordinates are expected to
have an upper left origin.
If the hardware point coordinate supports (only) a lower left origin,
the backend has to use lower_wpos_pntc and then lower *again* to flip
back. This ends up transforming twice, which is wasteful:
a = load point coord Y with lower left origin
a' = 1.0 - a
a'' = uniform_transform(a')
However, lower_wpos_pntc is quite capable of transforming for a lower
left origin too, it just needs to flip the transformation. Add a CAP
specifying the point coordinate origin convention, rather than assuming
upper-left. This simplifies the Asahi code greatly.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16829>
to allow exposing 4G - 1. The "SIZE" was also a misnomer because it meant
elements. This no longer clamps the size to INT_MAX in st/mesa.
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16881>
The drivers not setting it were:
- nv30, which gets lowering using NIR's lower_fsat flag.
- r300, which gets lowering using NIR's lower_fsat flag.
- a2xx, which has was getting it optimized back to fsat anyway.
This drops the check for the cap from gallium nine. While nine does have
a non-nir path, I think it's safe to assume that if you have SM3
texturing, you can do fsat.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16823>
There's no way currently in virgl to determine whether it's running
above CPU or GPU. This info will be used to disable HW SELECT.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15765>
This is used for the old, buggy and slow GLSL IR loop unrolling
code. All drivers have now switched to the NIR unrolling code so
here we remove the CAP.
Reviewed-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16366>
Now that all consumers of GLSL use NIR, make the remaining drivers take
the path that relies on NIR to really do optimization.
nouveau steam shader-db runtime -6.69631% +/- 1.29235% (n=12).
No change on shader-db there.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16364>
The only interesting ones here were LOWER_IF_THRESHOLD (which previously
had connected to some lowering in GLSL that was broken in the face of side
effects), and FMA (which turned GLSL IR's fma() into TGSI_OPCODE_FMA
instead of MAD).
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8044>
This way we can make allow_draw_out_of_order true by default for all
apps, iff the driver allows it.
And allow_draw_out_of_order=false can still be used in drirc, for
apps that need this optim to be turned off.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Acked-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16139>
GL spec states that the stride for indirect multidraws:
* cannot be negative
* can be zero
* must be a multiple of 4
some drivers can't support strides which are not a multiple of the
size of the indirect struct being used, however, so rewrite those to
direct draws
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15963>
This cap is no longer TGSI specific, so let's rename it to reflect
reality.
Because the name got a bit vague when removing the TGSI-bits, let's add
some more details to the name.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15316>
This isn't specific to TGSI, so let's update the name to reflect
reality.
Because the name of the opcode was TGSI specific, let's pick a new one,
based on the naming of the PIPE_CAP_TEXTURE_QUERY_LOD cap.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15316>
This cap is no longer TGSI-specific, so let's update the name to reflect
reality.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15316>
These aren't spiecic to TGSI any more, so let's rename them to reflect
reality.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15316>
These aren't specific to TGSI, so let's rename them to reflect the
reality.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15316>
Similar to the previous commits, these aren't TGSI specific, so let's
drop TGSI from their name.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15316>
This cap is no longer specific to TGSI, so let's rename it and update
the documentation to reflect that.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15316>
This cap no longer has anything to do with TGSI, as the lowering happens
on GLSL IR, and applies just as much to NIR drivers. So let's rename
this cap and update the docs to reflect the current situation.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15316>
for drivers where separate cull distance variables are required, this
lets them avoid having to write yet another pass to undo gallium's mangling
of shader info
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14878>
Softpipe was the only driver still using this feature. I had enabled it
in ba22f014f9 ("softpipe: Enable PIPE_CAP_TGSI_ANY_REG_AS_ADDRESS;") for
an instr count win, but it's really not important to that driver and it's
not worth keeping the knob around just for that.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14360>
There exists hardware intel gen4 specifically that has only 6 clip planes
but supports GLSL 1.30. This enhances the CAP so that the current values
of 0,1 remain the same, but giving it a larger number will override the
max.
This allows the gen4 intel to set this to 6 and leave everyone else alone.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14344>
This was useful for emulating GL 3.2 in virgl on a GLES3 host renderer,
before GL_EXT_depth_clamp introduced the ability for hardware drivers to
expose the feature on GLES. Now that we have that, the desktop-GL-capable
HW that virgl cares about can expose desktop GL even on its GLES renderer
on the host without this emulation. I don't think anyone particularly
cares about hitting higher GL versions on actually-core-GLES hosts with
virgl.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13729>
This capability is enabled for drivers supporting formatless image
writing in shader.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13409>
this reworks PIPE_CAP_PREFER_BLIT_BASED_TEXTURE_TRANSFER into an
enum as PIPE_CAP_TEXTURE_TRANSFER_MODES, enabling drivers to choose
a (sometimes) faster, compute-based download mechanism based on a new
pipe_screen hook
compute pbo download is implemented using shaders with a prolog to convert
the input format to generic rgb float values, then an epilog to convert
to the output value. the prolog and epilog are determined based on a vec4
of packed ubo data which is dynamically updated based on the API usage
currently, the only known limitations are:
* GL_ARB_texture_cube_map_array is broken somehow (and disabled)
* AMD hardware somehow can't do depth readback?
otherwise it should work for every possible case
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Acked-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11984>
Driver should enable this cap if it prefers varyings to be aligned
to power of two in a slot, i.e. vec4 in .xyzw, vec3 in .xyz, vec2 in .xy
or .zw
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13151>
David Heidelberg
Pavel Asyutchenko
Mike Blumenkrantz
Qiang Yu
Emma Anholt
Alyssa Rosenzweig
Marek Olšák
Timothy Arceri
Pierre-Eric Pelloux-Prayer
Erik Faye-Lund
Yonggang Luo
Erik Faye-Lund
Dave Airlie
Juan A. Suarez Romero
Vasily Khoruzhick