This can remove special handling of tessfactors which also benifit
the nir lower pass which does not handle these as system value.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16705>
Allow 1/4 of the max heap size, but maximum of 512 MB on 32-bit
architectures.
Reviewed-by: Mihai Preda <mhpreda@gmail.com>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16901>
to allow exposing 4G - 1. The "SIZE" was also a misnomer because it meant
elements. This no longer clamps the size to INT_MAX in st/mesa.
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16881>
The drivers not setting it were:
- nv30, which gets lowering using NIR's lower_fsat flag.
- r300, which gets lowering using NIR's lower_fsat flag.
- a2xx, which has was getting it optimized back to fsat anyway.
This drops the check for the cap from gallium nine. While nine does have
a non-nir path, I think it's safe to assume that if you have SM3
texturing, you can do fsat.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16823>
This is used for the old, buggy and slow GLSL IR loop unrolling
code. All drivers have now switched to the NIR unrolling code so
here we remove the CAP.
Reviewed-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16366>
NIR already has the necessary lowering, and the GLSL lowering violates
GLSL IR validation rules. Once quadop lowering was turned off, the IR
validation at the end of the compile path on DEBUG builds caught the
problem.
In order to move the lowering to NIR, though, we need to make sure that
drivers supporting these functions actually have the lowering flag set.
xfails added for t860, where apparently this tickles a variety of existing
64-bit bugs in the backend.
Fixes: #6461
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Mykhailo Skorokhodov <mykhailo.skorokhodov@globallogic.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16437>
This allows creating high priority contexts when using radeonsi. It's
primarily intended for apps whose rendering commands must be processed
as soon as possible, e.g. wayland compositors.
Signed-off-by: Vlad Zahorodnii <vlad.zahorodnii@kde.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16594>
Reviewed-by: Mihai Preda <mhpreda@gmail.com>
Acked-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Martin Roukala <martin.roukala@mupuf.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16604>
Now that all consumers of GLSL use NIR, make the remaining drivers take
the path that relies on NIR to really do optimization.
nouveau steam shader-db runtime -6.69631% +/- 1.29235% (n=12).
No change on shader-db there.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16364>
The only interesting ones here were LOWER_IF_THRESHOLD (which previously
had connected to some lowering in GLSL that was broken in the face of side
effects), and FMA (which turned GLSL IR's fma() into TGSI_OPCODE_FMA
instead of MAD).
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8044>
util_cpu_detect is an anti-pattern: it relies on callers high up in the call
chain initializing a local implementation detail. As a real example, I added:
...a Mali compiler unit test
...that called bi_imm_f16() to construct an FP16 immediate
...that calls _mesa_float_to_half internally
...that calls util_get_cpu_caps internally, but only on x86_64!
...that relies on util_cpu_detect having been called before.
As a consequence, this unit test:
...crashes on x86_64 with USE_X86_64_ASM set
...passes on every other architecture
...works on my local arm64 workstation and on my test board
...failed CI which runs on x86_64
...needed to have a random util_cpu_detect() call sprinkled in.
This is a bad design decision. It pollutes the tree with magic, it causes
mysterious CI failures especially for non-x86_64 developers, and it is not
justified by a micro-optimization.
Instead, let's call util_cpu_detect directly from util_get_cpu_caps, avoiding
the footgun where it fails to be called. This cleans up Mesa's design,
simplifies the tree, and avoids a class of a (possibly platform-specific)
failures. To mitigate the added overhead, wrap it all in a (fast) atomic
load check and declare the whole thing as ATTRIBUTE_CONST so the
compiler will CSE calls to util_cpu_detect.
Co-authored-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reviewed-by: Marek Olšák <maraeo@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15580>
This cap is no longer TGSI specific, so let's rename it to reflect
reality.
Because the name got a bit vague when removing the TGSI-bits, let's add
some more details to the name.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15316>
This isn't specific to TGSI, so let's update the name to reflect
reality.
Because the name of the opcode was TGSI specific, let's pick a new one,
based on the naming of the PIPE_CAP_TEXTURE_QUERY_LOD cap.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15316>
This cap is no longer TGSI-specific, so let's update the name to reflect
reality.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15316>
These aren't spiecic to TGSI any more, so let's rename them to reflect
reality.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15316>
These aren't specific to TGSI, so let's rename them to reflect the
reality.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15316>
Similar to the previous commits, these aren't TGSI specific, so let's
drop TGSI from their name.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15316>
This cap is no longer specific to TGSI, so let's rename it and update
the documentation to reflect that.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15316>
This cap no longer has anything to do with TGSI, as the lowering happens
on GLSL IR, and applies just as much to NIR drivers. So let's rename
this cap and update the docs to reflect the current situation.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15316>
moved from radeonsi without the vectorization, which won't be needed for
now. We will lower IO in st/mesa instead of radeonsi to get the transform
feedback info into store instructions.
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14388>
Marek Olšák
Konstantin Seurer
Qiang Yu
Emma Anholt
Timothy Arceri
Vlad Zahorodnii
James Zhu
Pierre-Eric Pelloux-Prayer
Jason Ekstrand
Erik Faye-Lund
Erik Faye-Lund
Thong Thai