To handle CMASK, FMASK and DCC transitions in the same place.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Niuwenhuizen <bas@basnieuwenhuizen.nl>
Mostly because DCC implies a fast-clear eliminate and we
should be able to skip some DCC decompressions by setting
a predicate like for CMASK and FMASK.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Niuwenhuizen <bas@basnieuwenhuizen.nl>
When decompressing DCC we don't enable it, so it's useless
to disable it. This reduces the number of prediction packets
sent to the GPU when performing color decompression passes.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Niuwenhuizen <bas@basnieuwenhuizen.nl>
- remove mtypes.h from most header files
- add main/menums.h for often used definitions
- remove main/core.h
v2: fix radv build
Reviewed-by: Brian Paul <brianp@vmware.com>
Pretty straight forward, just pass the divisors through the shader
key and then do a LLVM divide.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
num_dcc_levels means that DCC is supported, but this doesn't
mean that it's enabled by the driver. Instead, we should rely
on radv_image_has_dcc().
This fixes some multisample regressions since 0babc8e5d6
("radv: fix picking the method for resolve subpass") on Vega.
This is because the resolve method changed from HW to FS, but
those fails are totally unexpected, so there might some
differences between Polaris and Vega here.
Fixes: 44fcf58744 ("radv: Disable DCC for GENERAL layout and compute transfer dest.")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This helper shares common code before resolving using either
a fragment or a compute shader.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
All the information in vk_android_native_buffer.xml is now in vk.xml.
The only exception is the extension type attribute which we can work
around in the generators while we wait for the XML to be fixed.
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
According to Marek, not enabling it on Stoney has a significant
negative performance impact. (And I guess this might impact
performance on Raven as well)
The register settings are pretty much copied from radeonsi. I did
not put this in the pipeline as that would make the pipeline more
dependent on the format which mean we would have to have more
pipelines for the meta shaders.
v2: Don't clear RB+ regs if not enabled as the CLEAR_STATE packet
does already.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
The source and destination image parameters were swapped.
No CTS changes on Polaris10, but I suspect this might
fix something.
Fixes: 2a04f5481d ("radv/meta: select resolve paths")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Otherwise, the shader BOs are not added to the list on SI because
prefetching isn't supported. Calling radv_cs_add_buffer() in the
prefetch codepath was a bad idea.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105952
Fixes: 4ad7595f35 ("radv: rename radv_emit_prefetch() to radv_emit_prefetch_L2")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Turo Lamminen <turo@alternativegames.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This enables the tile swizzle for some cases of the displayable micro mode,
and it also fixes an addrlib assertion failure on Vega.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
As we sometimes reset them to -1, -1 does not mean that they are
not written by the secondary command buffer.
Fixes: ad11fc3571 "radv: don't emit unneeded vertex state."
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
The packet can sometimes be skipped, but we still think the change takes effect.
This just makes the packet always take effect.
Fixes: ad11fc3571 "radv: don't emit unneeded vertex state."
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105942
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Forgot one check... Too many mistakes for a simple change.
Fixes: f1d7c16e85 ("radv: fix prefetching compute shaders on CIK and older chips")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Simple extension that only returns information for AMD hw.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
... to radv_use_tc_compat_htile_for_image(). This function
name makes more sense to me because we want to know if and
only if TC-compat HTILE should be used.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
If the image has FMASK metadata, the number of samples is > 1
because radv_image_can_enable_fmask() handles that already.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
And rename to radv_dcc_enabled() to be consistent.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
DCC for MSAA textures are currently unsupported but that will
be used later on.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
They will help for DCC MSAA textures and if we support mipmaps
in the future.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This is unnecessary because we record an error which should
be returned by vkEndCommandBuffer(), and the app shouldn't
submit a command buffer when this happens.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Because the check was moved to radv_emit_prefetch_L2().
Fixes: 4ad7595f35 ("radv: rename radv_emit_prefetch() to radv_emit_prefetch_L2()")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This unnecessary when the precision bit flag is not set, and this
might hurt performance. The Vulkan explains that not setting
VK_QUERY_CONTROL_PRECISE_BIT might be more efficient on some
implementations.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Enable it directly in the preamble, but do not enable line
on Polaris10/11/12 because there is a hw bug.
There is possibly an issue when MSAA is off, but this doesn't
regress any CTS and AMDVLK doesn't have a workaround as well.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This allows to start draws as soon as possible.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Disabled by default for now, it can be enabled with
RADV_PERFTEST=outoforder.
No CTS regressions on Polaris, and all Vulkan games I tested
look good as well.
Expect small performance improvements for applications where
out-of-order rasterization can be enabled by the driver.
Loosely based on RadeonSI.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
With cb_target_enabled_4bit in order to have four bits per CB.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Some will be used for further optimizations (ie. out-of-order rast).
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
For GFX9+ only, RadeonSI does this too.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The driver already supports exporting the Layer and ViewportIndex
built-ins from vertex or tessellation shaders.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Include llvm-c/Transforms/Utils.h with the newest LLVM 7
Signed-of-by: Mike Lothian <mike@fireburn.co.uk>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
The new name make the zero-input behavior more obvious. The next
patch adds a new function with different zero-input behavior.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Suggested-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
To fix a regression in:
dEQP-VK.spirv_assembly.instruction.graphics.variable_init.output.struct
And the following regressions (Polaris only):
dEQP-VK.glsl.indexing.varying_array.*
Fixes: f3275ca01c ("ac/nir: only enable used channels when exporting parameters")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
On GFX9 whether the buffer size is interpreted as elements or bytes
depends on whether IDXEN is enabled in the instruction. If the index
is a constant zero, LLVM optimizes IDXEN to 0.
Now the size in elements is interpreted in bytes which of course
results in out of bounds accesses.
The correct fix is most likely to disable the LLVM optimization,
but we need something to work with LLVM <= 6.0.
radeonsi does the max between stride and element count on the CPU
but that results in the size intrinsics returning the wrong size
for the buffer. This would cause CTS errors for radv.
v2: Also include the store changes.
Fixes: e38685cc62 'Revert "radv: disable support for VEGA for now."'
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Only enable for CIK+ because it's buggy on SI.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The driver only supports the required formats for now.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
We also fix the base_index for bindless by using the driver
location.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The hardware only supports 32-bit depth surfaces, but we can
enable TC-compat HTILE for 16-bit depth surfaces if no Z planes
are compressed.
The main benefit is to reduce the number of depth decompression
passes. Also, we don't need to implement DB->CB copies which is
fine.
This improves Serious Sam 2017 by +4%. Talos and F12017 are also
affected but I don't see a performance difference.
This also improves the shadowmapping Vulkan demo by 10-15%
(FPS is now similar to AMDVLK).
No CTS regressions on Polaris10.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Instead of that huge conditional that's going to be crazy.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Generated with
git grep -l nir_intrinsic_image | xargs \
sed -i 's/nir_intrinsic_image/nir_intrinsic_image_var/g'
and some manual fixing in nir_intrinsics.h
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This extension removes the restrictions on minDepth/maxDepth,
minDepthBounds/maxDepthBounds and VkClearDepthStencilValue::depth.
The following CTS tests now pass:
dEQP-VK.glsl.builtin_var.fragdepth.line_list_d32_sfloat_large_depth
dEQP-VK.glsl.builtin_var.fragdepth.point_list_d32_sfloat_large_depth
dEQP-VK.glsl.builtin_var.fragdepth.triangle_list_d32_sfloat_large_depth
dEQP-VK.draw.inverted_depth_ranges.nodepthclamp_depth_range_unrestricted
dEQP-VK.draw.inverted_depth_ranges.depthclamp_depth_range_unrestricted
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
It's a 32-bit integer like the layer.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Noticed while passing by. Not sure if it impacts anything, but
likely to impact GFX9 more than anything else since we lower
inputs, outputs and locals there.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
We have some cases where in subpass we want the layer but having
it be 0 and loaded in the frag shader without the vertex shader
exporting it is fine.
So don't export the layer if we don't have a value to put in it.
Fixes: d4c74aed7a (radv/multiview: mark layer_input if we have input attachments.)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
If a shader only writes to an output via a constant initializer we
need to lower it before we call nir_remove_dead_variables so that
this pass sees the stores from the initializer and doesn't kill the
output.
Fixes test failures in new work-in-progress CTS tests:
dEQP-VK.spirv_assembly.instruction.graphics.variable_init.output.float
This is ported from anv:
99b57daf4a anv/pipeline: lower constant initializers on output variables earlier
from Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
For multiview we need to emit a number of sequential queries
depending on the view mask.
This avoids dEQP-VK.multiview.queries.15 waiting forever
on the CPU for query results that are never coming.
We only really want to emit one query,
and the rest should be blank (amdvlk does the same),
so we emit begin/end pairs for all the others except
the first query.
v2: fix tests
v3: split out patch.
Fixes: dEQP-VK.multiview.queries*
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This just splits out the begin/end query hw emissions,
it makes it easier to add multiview support for queries.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This fixes:
dEQP-VK.multiview.input_attachments*
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
The fragment shader was trying to read this, but nothing
was exporting it from the vertex shader. This handles
it like the prim id export.
Fixes:
dEQP-VK.multiview.secondary_cmd_buffer.*
dEQP-VK.multiview.index.fragment_shader.*
v1.1: updated to use 0x1 (Samuel)
Fixes: e3265c10c8 (radv: Implement multiview draws.)
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This removes the other geometry specific user sgpr.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This drops one of the geometry specific user sgprs,
we can work this out at compile time.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This moves the lds_size calcs into the shader so we have all
the size stuff in one file.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This drops the now unneeded scanning and results in favour
of the ones in the info.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Instead of recalculating the value, use the shader calculated value.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
TES needs num_patches to do some of the calculations.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
We can precalculate input_vertex_size at compile time.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This gathers the ls outputs written by the vertex shader,
and the tcs outputs, these are needed to calculate certain
tcs parameters.
These have to be separate for combined gfx9 shaders.
This is a bit pessimistic compared to the nir pass,
as we don't work out the individual slots for tcs outputs,
but I actually thing it should be fine to just mark the whole
thing used here.
v2: move to radv, handle clip dist (Samuel),
handle compacts and patchs properly.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just moves this function to an inline so the shader_info
pass can use it.
v2: use inline (Samuel)
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
If AMD_shader_info or RADV_TRACE_FILE is used we might need to
keep trace of LLVM IR.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Just to be sure all options are enabled when trying to generate
a hang report.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
So now, during spirv_to_nir, it uses the capability instead of the
extension. Note that we are really doing here is treating
SPV_AMD_gcn_shader as other supported extensions. SPV_AMD_gcn_shader
is not the first SPV extension supported. For example, the capability
draw_parameters infers if the extension SPV_KHR_shader_draw_parameters
is supported or not.
This could be seen as counter-intuitive, and that it would be easier
to define which extensions are supported, and based our checks on
that, but we need to take into account that some capabilities are
optional from core, and others came from new extensions.
Also this commit would make the implementation of ARB_spirv_extensions
easier.
v2: AMD_gcn_shader capability renamed to gcn_shader (Daniel Schürmann)
Reviewed-by: Daniel Schürmann <daniel.schuermann@campus.tu-berlin.de>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
From the spec:
"When copying between compressed and uncompressed formats the
extent members represent the texel dimensions of the source
image and not the destination."
However, as per 7b890a36, we must still use the destination image type
when clamping the extent so that we copy the correct number of layers
for 2D to 3D copies.
Fixes: 7b890a36 "radv: Fix vkCmdCopyImage for 2d slices into 3d Images"
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This fixes CTS:
dEQP-VK.api.device_init.create_device_queue2_unmatched_flags
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@gmail.com>
The spec is pretty clear that this can be 0, and that it operates
as a reserved binding.
Fixes:
dEQP-VK.binding_model.descriptor_update.empty_descriptor.uniform_buffer
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
If a shader does a tcs store with an indirect access, we
were only marking the first spot as used. For indirect access
we always now mark all slots used by the variable.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105464
Fixes: 94f9591995 (radv/ac: add support for TCS/TES inputs/outputs.)
Signed-off-by: Dave Airlie <airlied@redhat.com>
I was going to have to add another parameter to this monster,
so we should just pass the nir_variable in, I can't find any
reason this would be a bad idea.
This needed for the next fix.
Fixes: 94f9591995 (radv/ac: add support for TCS/TES inputs/outputs.)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This seems more correct to me, since if we have an array
of floats they'll be vec4 aligned, and if we do af[2],
we want the const index to increase by 2 slots in the non
compact case.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105464
Fixes: 94f9591995 (radv/ac: add support for TCS/TES inputs/outputs.)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Now the "ac/nir" prefix will really be the shared code between
RadeonSI and RADV, that might avoid confusions in the future.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The vulkan API is not ideal as it does not allow us have a
shared limit.
Feral needs 15+6 for one of their games, and I'm not a fan
of overcommitting the limits, so increase the number of
dynamic uniform buffers to 16.
CC: <mesa-stable@lists.freedesktop.org>
CC: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
If the api version is too low, the loader clamps the application
requested version to the advertized version, which messes with
which extensions are enabled.
Reviewed-by: Dave Airlie <airlied@redhat.com>
On Android surface/swapchain extensions are implemented by the loader. Patch
modifies both anv and radv extension scripts disabling currently exposed
ones. See also earlier commit 9f763c1f9b.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Until llvm handles indirects better we will need to use these
workarounds in the radeonsi backend also.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This is just useless for two reasons:
1) flush_bits is not set accordingly, so nothing will be flushed
in BeginQuery().
2) we always flush caches in EndCommandBuffer(), so if a reset
is done in a previous command buffer we are safe.
Cc: "18.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This is an optimization which reduces the number of flushes for
small pool buffers.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
If the query pool has been previously resetted using the compute
shader path.
Fixes: a41e2e9cf5 ("radv: allow to use a compute shader for resetting the query pool")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105292
Cc: "18.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Nothing to do except using a busy wait loop. At least for old kernels.
A better implementation for newer kernels to come later.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105255
Fixes: f4e499ec79 "radv: add initial non-conformant radv vulkan driver"
Reviewed-by: Dave Airlie <airlied@redhat.com>
This is never used.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
It looks like we had all the pieces in place for this,
just never tested it and turned it on.
I don't see any CTS regressions and the computeshader
demo runs.
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Samuel Pitoiset
Daniel Schürmann
Marek Olšák
Bas Nieuwenhuizen
Tapani Pälli
Jason Ekstrand
Mike Lothian
Ian Romanick
Timothy Arceri
Juan A. Suarez Romero
Dave Airlie
Grazvydas Ignotas
Alejandro Piñeiro
Alex Smith