Brian Paul
9705cff203
mesa: re-org texgen state
...
New gl_texgen struct allows quite a bit of code reduction.
2009-02-21 13:23:04 -07:00
Kristian Høgsberg
5b354d39d4
intel: Fix intelSetTexBuffer miptree leak.
...
The intelImage also holds a reference to the miptree, so unref that as well.
2009-02-21 14:12:53 -05:00
Eric Anholt
40dd024be6
intel: tell libdrm whether we want a cpu-ready or gpu-ready BO for regions.
...
This lets us avoid allocing new buffers for renderbuffers, finalized miptrees,
and PBO-uploaded textures when there's an unreferenced but still active one
cached, while also avoiding CPU waits for batchbuffers and CPU-uploaded
textures. The size of BOs allocated for a desktop running current GL
cairogears on i915 is cut in half with this.
Note that this means we require libdrm 2.4.5.
2009-02-21 10:53:41 -08:00
Eric Anholt
078e8a61b2
i965: Fix render target read domains.
...
We were asking for something illegal (write_domain != 0 && read_domains !=
write_domain) because at the time of writing the region surfaces were used
for texturing occasionally as well, and we weren't really clear on the model
GEM was going to use.
This reliably triggered a kernel bug with domain handling, resulting in
oglconform mustpass.c failure. Of course, it only became visible after
01bc4d441f
cleaned up some gratuitous flushing.
2009-02-21 10:53:05 -08:00
Brian Paul
776971218e
gallium: use the TGSI_TEXTURE_SHADOW1D/2D/RECT texture types for TEX instructions
...
These texture types were defined but never put to use.
For the time being though, the Mesa->TGSI translater isn't emitting these
targets. See the XXX comment in map_texture_target().
2009-02-20 14:06:25 -07:00
Brian Paul
e0d9073081
i965: use the new prog_instruction::TexShadow field
...
GLSL shadow() sampler calls are properly propogated down to the driver now.
The glean glsl1 shadow() tests work (except for the alpha channel).
2009-02-20 13:50:27 -07:00
Brian Paul
773e9d4765
i965: check depth_mode in translate_tex_format() for MESA_FORMAT_S8_Z24
...
Note that I24X8 vs. A24X8 vs. L24X8 doesn't seem to make any difference
for texture/shadow compare, however.
2009-02-20 13:48:44 -07:00
Brian Paul
0ea95ae742
glsl: use new IR opcodes for TEX instructions with shadow comparison
...
Such TEX instructions will have the TexShadow flag set.
The gl_program::ShadowSamplers field is now set in the linker. We missed
that before.
2009-02-20 13:44:43 -07:00
Brian Paul
44e018c09e
mesa: add TexShadow field to prog_instruction
...
If the instruction is TEX/TXP/TXL/etc the TexShadow field will be true if
the instruction is a texture fetch with shadow compare.
2009-02-20 13:42:08 -07:00
Brian Paul
a79186e29e
i965: separate emit_op() and emit_tex_op() functions
2009-02-20 12:23:25 -07:00
Brian Paul
e3cc8e8244
mesa: freshen-up comments, move some fields in prog_instruction
2009-02-20 11:44:38 -07:00
Brian Paul
55d33e1fa7
i965: update comment, use const qualifier
2009-02-20 11:44:38 -07:00
Brian Paul
f5674b566e
i965: var renaming, clean-up
2009-02-20 11:44:38 -07:00
Brian Paul
fc320d4641
i965: added comment
2009-02-20 11:44:38 -07:00
Brian Paul
da2b661ee4
intel: fix datatype typo, s/GLboolean/GLuint/
...
Fixes mysterious failures in glean glsl1 test.
2009-02-20 11:44:38 -07:00
Brian Paul
d8de0a2f3a
i965: additional debug output
2009-02-20 11:44:38 -07:00
Brian Paul
c0b59420ee
glsl: rename GLSL texture assembly instructions to be more legible
2009-02-20 11:44:17 -07:00
Brian Paul
ad2cfa4199
glsl: fix vec4_texp_rect IR code (need projective version)
2009-02-20 11:42:28 -07:00
José Fonseca
60e35ebf14
python: More efficient blits from surfaces.
...
C code instead of interpreted python code.
2009-02-20 16:50:02 +00:00
José Fonseca
7738855988
util: Use a checkboard pattern instead of asserting for unknown formats.
...
Useful to replay traces which use DXTC textures...
2009-02-20 16:48:45 +00:00
José Fonseca
059d7f3103
python/interpreter: Don't do unnecessary updates.
2009-02-20 15:23:33 +00:00
José Fonseca
e92f3310fa
python/retrace: Verbosity level.
2009-02-20 15:14:15 +00:00
José Fonseca
204526a6d2
python/retrace: Cope with python 2.4.x
2009-02-20 15:02:19 +00:00
Keith Whitwell
02ab1eaed7
util/debug: need to fflush(stderr) on windows
...
Hard to believe... but true.
2009-02-20 14:27:23 +00:00
José Fonseca
5b41e30f26
util: Also output messages to stderr on windows.
...
When there is a console attached, and no debugger attached.
2009-02-20 14:14:19 +00:00
José Fonseca
7887a3e42b
python: Pass a zero offset to util_draw_vertex_buffer.
2009-02-20 13:00:13 +00:00
José Fonseca
a5c2570dc5
wgl: Prevent null pointer reference.
2009-02-20 11:54:18 +00:00
José Fonseca
ee4e4a6b96
util: Stack backtracing facilities.
...
Not much useful until we have symbol lookup.
2009-02-20 11:54:18 +00:00
Jakob Bornecrantz
d67bd60ecf
gallium: s/GALLIUM_DRIVER_DIRS/GALLIUM_DRIVERS_DIRS/
2009-02-20 11:25:55 +00:00
Jakob Bornecrantz
fffadc219f
gallium: Improve recursive makefiles
2009-02-20 11:25:55 +00:00
Jakob Bornecrantz
3eebd24cb6
gallium: Improve winsys dri template Makefile
...
LIBNAME_EGL had to be removed since if you didn't
set it (nobody set it anyways) make would get it
confused it with the $(TOP)/lib/gallium target.
2009-02-20 11:23:32 +00:00
Jakob Bornecrantz
5089e5c052
intel: Use new makefile template for drm gem
2009-02-20 10:22:11 +00:00
Jakob Bornecrantz
2734b8079d
nouveau: Use new makefile template for drm common
2009-02-20 10:22:11 +00:00
Jakob Bornecrantz
d9602e5144
gallium: Improve makefiles for libraries
...
The template makefile that most libraries in
gallium included was based on dri and had a bunch
unrelevant junk in it.
Update it and improve the depending makefiles.
2009-02-20 10:22:10 +00:00
Ben Skeggs
8cf997b7c8
nouveau: reenable all the non-nv50 pipe drivers
...
They still won't build yet, but anyway..
2009-02-20 09:47:56 +10:00
Ben Skeggs
b85c81760c
nv50: remove unused variable
2009-02-20 09:43:25 +10:00
Ben Skeggs
5ea8068f24
nv50: fix occlusion queries
...
Left behind from some gallium changes a while back..
2009-02-20 09:43:24 +10:00
Ben Skeggs
63a3a3762c
nv50: rework for texture_transfer changes
2009-02-20 09:43:24 +10:00
Jakob Bornecrantz
9c9fcc83c0
gallium: Renable pipe drivers disabled during vbuf changes
...
i965simple is not enabled because it is still broken.
2009-02-19 23:16:57 +01:00
Jakob Bornecrantz
4e37f10806
trival: Make the last of progs show the name
2009-02-19 22:50:18 +01:00
Brian Paul
2b32c7dff5
mesa: support GL_EXT_stencil_two_side in gallium/mesa state tracker
...
Since Ian's patch of a few weeks ago, we can enable all three variations
of two-sided stencil. Update the state tracker to handle the extra back-
face state and turn on the EXT.
Note: there's a new Glean test for two-sided stencil now...
2009-02-19 14:45:27 -07:00
Brian Paul
a304cc6cca
mesa: fix/update/restore comments related to two-sided stencil
2009-02-19 14:45:27 -07:00
Brian Paul
2a968113a9
mesa: initialize ctx->Stencil._BackFace = 1
...
Back-face stencil operations didn't work correctly because this value was
zero. It needs to be 1 or 2. The only place it's set otherwise is in
glEnable/Disable(GL_STENCIL_TEST_TWO_SIDE_EXT).
2009-02-19 14:45:26 -07:00
José Fonseca
43b31fc6fc
util: Support PIPE_FORMAT_Z32_FLOAT in pipe_tile_raw_to_rgba
2009-02-19 12:56:56 +00:00
José Fonseca
7c12e1aa53
pipebuffer: Dump debugging info for fenced buffer list.
2009-02-18 15:12:16 +00:00
José Fonseca
46728037a0
scons: Produce map files for debug builds too.
2009-02-18 15:05:23 +00:00
José Fonseca
c7431552c0
pipebuffer: Don't retry to alloc memory block on mm.
...
It will give the same result 2nd time too, as fencing is done at a
higher level.
2009-02-18 10:25:04 +00:00
Keith Whitwell
8ef377d76b
draw: Reuse xmm registers.
2009-02-17 21:45:54 +00:00
Jakob Bornecrantz
480bb4c217
draw: Fix segfault if rast is null
2009-02-14 17:49:46 +01:00
Michel Dänzer
0794f1d6df
gallium/winsys/xlib: Fix build with USE_XSHM undefined.
2009-02-19 19:52:59 +01:00