This fixes cases where the 3D path is used with layered rendering.
Fixes dEQP-VK.renderpass.suballocation.multisample_resolve.layers* failures
Note the blob's 3D fallback path behaves differently, and uses the
framebuffer information to clear each layer individually (changing the MRT
state each time). But that's not possible in all cases, and the blob fails
to clear properly in dEQP-VK.geometry.layered.*.secondary_cmd_buffer cases.
So this clear path is not based on the blob's behavior.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5426>
I'm not sure why this code was if (0), but if (1) for it fixes
dEQP-GLES31.functional.texture.border_clamp.range_clamp.nearest_float_color
This test expects +inf to get mapped to 255 and -inf to 0, both values
were ending up at 0.
v2: also enable in the SSE paths
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5379>
This fixes:
dEQP-GLES31.functional.draw_indirect.random.2
which ends up with 3x32-bit USCALED values going down this path
some of which have the top bit set, and end up converted to signed
float instead of unsigned float values.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5379>
dEQP-GLES2.functional.clipping.triangle_vertex.clip_three.clip_neg_x_neg_z_and_pos_x_pos_z_and_neg_x_neg_y_pos_z
fails pretty strangely (given that we're passing everything else) and
there's an old VK-GL-CTS bug open about this test, and it's suspicious
that all the ARM drivers seem to have trouble with it. I tried dropping
to -O0 on guilding that file in the CTS and it didn't help, though.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5419>
This hooks up the gallium API and adds the APIs needed
for shader stages to search and add things to the cache.
It also adds cache stats debug printing.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5049>
This uses the new nir_intrinsic_store_combined_output_pan intrinsic,
which can write depth, stencil and color in a single instruction. If
there are no color writes, the "depth RT" is written to.
Fixes the dEQP GLES3 depth write tests, as well as the piglit tests
fragdepth_gles2, glsl-1.10-fragdepth and when modified to not rely
on depth/stencil reload, glsl-fs-shader-stencil-export.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5065>
rm -rf and then copying over all the contents again is a waste of time
when we'll almost always be using the same rootfs. Saves about 30s of job
time.
Closes: #3065
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5266>
Test 1/50th of the CTS on a630 pre-merge, since we've got hardware that
can do it and infrastructure that should handle instability with a
less-mature driver.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5266>
I'm going to enable the VK CTS on cheza, so swap the deqp we have in the
container. build-deqp-vk already included GLES deqp binaries and data,
and is a newer branch than the last opengl-es-cts tag.
This brings a few things back over from build-deqp-gl for testlog
extraction, and copyes out the GLES mustpass lists.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5266>
Using arm_test-base as a separate base layer as well for storage &
network bandwidth efficiency.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5381>
asin(x) is now implemented using a piecewise approximation, which
improves the precision for |x| < 0.5
Previously, we were using a polynomial approximation for both the
asin() and acos() functions. Unfortunately, for asin(), this polynomial
does not have enough precision to satisfy the Vulkan CTS requiremenents,
which define the asin() precision based on the precision of
atan2(x, sqrt(1.0 - x*x)). The piecewise approximation gives the needed
precision in the problematic range.
v2: Skip the piecewise approximation for acos
Closes: #1843
Acked-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3809>
We need to support different fastboot fetch strings for different
bootloader solutions. Lets extend expect-output.sh to support
multiple fetch strings (-f) and add support for error catch
strings (-e) to stop the CI run early.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5258>
the virgl CI code was using the noopt path and crashing with a
wierd can't select llvm.coro.subfn.addr error, turns out we have
to call the cleanup pass no matter what.
This enable a lot more virgl gles31 passes, but we have
to disable tessellation shaders as now they executed, they
crash due to missing OES_gpu_shader5, I should try and reenable
them when llvmpipe is further along
Fixes: d32690b43c ("gallivm: add coroutine pass manager support")
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Acked-by: Elie Tournier <elie.tournier@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5320>
Switches have been rewired, VLANs have been reconfigured, network
elements with non-functional remote management have been removed from
racks and thrown on desks in anger.
This reverts commit ae6e1aee7d1bd49ae494b8a25ca33d092a3a145a.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5301>
Makes it possible to use e.g. a ser2net script to talk to the devices.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5268>
By definition.
This reduces register pressure on freedreno so that the noubo expected
failure goes away.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5002>
We're reconfiguring our Cambridge office lab networking and physical
setup for more scalability amongst other things. We can still run jobs
on one RK3399 at the peak outage, but we'll lose the T7x0 this morning,
so disable it until it's all back.
T820 is still disabled due to an unrelated BayLibre internal outage.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5296>
Using x86_build-base as a separate base layer as well for storage &
network bandwidth efficiency.
Using separate images allows dropping the workarounds from the cross
build job scripts.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5296>
And python3-distutils back to x86_test-gl's list.
These are not used for building Mesa, only for other components used in
test jobs.
This partially reverts commit c1a290bdd5
"meson: Bump required version to 0.52.0".
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5296>
They're available in Debian 9 (stretch) as well.
This will avoid conflicts with packages from Debian testing.
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5296>
Fixes the rest of dEQP-GLES3.functional.fragment_out.array.uint.*, this
situation occurs with MRT and large pixels.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5265>
This gets us back to the behavior we used to have for freedreno: clicking
play on arm_test gets you testing of the ARM platforms that aren't under
arm-build (the LAVA runners).
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5247>
This will let us:
- deploy kernels for testing code depending on new kernel featuers
- Ensure a pristine state in the HW before starting our tests
- Avoid disk rot on the chezas taking them out (we'd lost 3/9 in a few
months).
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5247>
This is a set of kernel options I've come up with mostly cribbing from
chrome os's kernel config snippet. We also build an lzma kernel, as
uncompressed kernel is big but lzma is the only compression supported by
the bootloader. With that image, we have to pack it into a FIT formatted
image+dtb blob.
CONFIG_SUNRPC_DEBUG is added so that you can set "nfsrootdebug" to figure
out what's going wrong with your nfs mount (mine were "both the tcp and
nfsvers options were required, and don't try to use 'default' as the root
path to defer to DHCP's answer because otherwise you get
/tftpboot/default, just use an empty root path which doesn't prepend
/tftpboot.")
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5247>
We won't have a user helper, so don't block for 60 seconds for it to show
up. Speeds up debug of new kernel builds.
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5247>
When you're bringing up a new driver in CI with significant number of
failures (or when a CI run breaks a driver), the QPA extraction can easily
take the whole job timeout as we go about processing each QPA (100 of them
in my early VK CI fails) per unexpected result we're saving (50), which
involves reading and each line of the file in shell. By quickly filtering
out the QPA files not including our test, we can save all that shell
overhead, bringing QPA extract time down to a couple of minutes.
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5225>
Making use of the relatively recent FDO_BASE_IMAGE feature of the
templates, the x86_test-base image contents are shared as a separate
layer by the x86_test-gl/vk images (meaning the former only needs to be
downloaded once for either or both of the latter). This should be more
efficient in terms of overall network bandwidth and storage, in
particular if the base image changes less often than the -gl/vk ones.
v2:
* List x86_test-base in needs: along with x86_test-gl/vk (see parent
commit)
* Always put $STABLE/TESTING_EPHEMERAL on separate lines, will make it
easier to add any non-ephemeral packages
Reviewed-by: Eric Anholt <eric@anholt.net> # v1
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5186>
Given that a530 doesn't have cpufreq, we really don't have the time to be
running the validator on all of deqp. This also helps explain why I had
to go to such a small fraction on the a3xx gles3 run (which we can now
increase). However, a3xx gles2 seems to be fast enough that we can leave
it enabled and get coverage for older chips.
Because we run more tests now, clear out some stale xfails from the a3xx
list.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5089>
We were doing sed -i /filter/p, which printed everything but printed the
filtered things twice (though they'd only get tested once). Now that the
filter works, run all the UBO tests instead of doing a 1/5 run, revealing
a new failure.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5089>
These fields (TILE_ALL and MIN_LAYERSZ) seem to be the same on a5xx as
a6xx, having looked at some UBWC vs non-UBWC texturator cases. Setting
MIN_LAYERSZ does fix the 3D fail we see in the CTS.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5127>
Now that we don't get scheduled to any 19mhz CPUs, the old GLES3 job went
from 12 minutes of deqp-runner runtime to 54s. Increase how much of the
testsuite we cover in exchange, still keeping the runtime at 3-6 min
(compared to previous 10-17 min). Since the tests we're running changed,
reset the xfails list.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5115>
Rather than heuristically guessing what PIPE formats correspond to what
in the hardware, hardcode a table. This is more verbose, but a lot more
obvious -- the previous format support code was a source of endless
silent bugs.
v2: Don't report RGB233 (icecream95). Allow RGB5 for texturing
(icecream95).
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5069>
The runner is an x86 system, so running the ARM image meant doing
everything at runtime under qemu, and for the xz of the test rootfs that
was quite expensive. Also, we can rebuild x86 images much faster than we
can rebuild arm images for container development, which will help unblock
some of the other feature parity work I have to do versus the old docker
system that cheza is using.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5033>
testing's versions have updated, and the apt one was pretty big in the
stripped rootfs.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5033>
If the file doesn't exist, fine. We didn't happen to get that package
dragged in.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5033>
This adds a few more variables that we found we needed for x86-to-arm dEQP
cross builds. Also note that we're now fixed to use ccache in the dEQP
builds.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5033>
The x86 baremetal build would have an armhf cross file, and need the
kernel env setup.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5033>
We're going to do this in another container soon, and it would also be
nice to consolidate cmake cross setup.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5033>
v2: Python's nitpick (Andres)
In case of an empty list of traces, the results.yml will contain an empty
curly braces. In YAML, an associative array can also be specified by text
enclosed in curly braces ({}),
This commit also adds the corresponding test to check the behavior of
tracie when no traces are added in the traces.yml file.
Signed-off-by: Pablo Saavedra <psaavedra@igalia.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4916>
test_tracie_skips_traces_without_checksum does the logic previous to
the commit 8546d1dd78. The traces.yml includes
several traces, only the one without checksum is ignored by tracie.
As a complementary action, this change adds an new test
(test_tracie_only_traces_without_checksum) to verify the behavior for
cases where the traces.yml only contains traces without checksum.
Finally, test_tracie_skips_traces_without_checksum is renamed as
test_tracie_traces_with_and_without_checksum
Signed-off-by: Pablo Saavedra <psaavedra@igalia.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4916>
v2: Verbatim translation from the original shell script
Make the corrections visible in explicit commits (Andres)
Remove redundant code (Alexandros)
Code style nitpick (Rohan)
Reimplementation of the tracie's self-tests using a pythonic test suit
(pytest).
The new tracie/test.py module is almost a direct translation of the
tests defined in the tracie/test.sh. This new implementation of the
test provides a more common framework where define the tests.
Also allows a better introspection for the tests results and/or
resulting errors.
This patch also adds python3-pytest as dependency for the built images
and adapts the tracie-runner scripts to run the self-test using pytest.
Signed-off-by: Pablo Saavedra <psaavedra@igalia.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com> [v1]
Reviewed-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Rohan Garg <rohan.garg@collabora.com> [v1]
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4916>
Change the main function to receive the args parameter from
sys.argv[1:]. The args parameter will be passed to the
ArgumentParser.parse_args() function as argument.
This change provides an easier main() function signature to use
with pythonic testsuites.
Signed-off-by: Pablo Saavedra <psaavedra@igalia.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Rohan Garg <rohan.garg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4916>
RESULTS_PATH and RESULTS_PATH, as variables in the module context, are
resolved one single time, only during the first module loading. If the
the Python code in execution changes the current dir at some point,
those paths are not going to be updated anymore keeping the paths
wrongly pointing to the old working dir.
This change modify the definition of those variables to use simply
relative paths.
Signed-off-by: Pablo Saavedra <psaavedra@igalia.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Rohan Garg <rohan.garg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4916>
A3xx apparently has higher alignment requirements than later gens for
indirect const uploads. It also has fewer of them. Add compiler
parameters for both settings, and set accordingly for a3xx and a4xx+.
This fixes all the ubo test failures caused by this optimization.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5077>
This causes failures on a3xx resulting in the non-sensical dEQP failures
on packUnorm2x16. The same test uses ldlv on a4xx+, so just disallow
(sat) on bary.f on all generations.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5074>
Rendering doesn't work, but having the format in place avoids an assert
when selecting the texture format in st_format. I believe it's required
for GLES3, so more tracing is required to determine what bit we're
missing to make rendering work.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5073>
This fixes a number of dEQP tests:
dEQP-GLES3.functional.fbo.blit.conversion.r8*
dEQP-GLES3.texture.specification.basic_teximage2d.r8*
and others. The reason why this enum showed up in traces for R8 is that
it was an "upgraded" texture to R8G8.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5073>
mingw-w64 pulls in a lot more packages we don't need.
g++-mingw-w64-x86-64-win32 is only available in Debian testing, so get
all mingw packages from there.
Acked-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4851>
Instead of a third-party repository which has proved unreliable at
times.
This pulls in glibc 2.30 from testing in the x86_build image, so we need
to update the x86_test-{gl,vk} images to match.
Acked-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4851>
We don't want LLVM 8 packages to be pulled in from testing though (it
would make installing llvm-8-dev for cross architectures a lot more
complicated), so explicitly select buster-backports for them (they were
already implicitly installed from there before, since they're not
available in buster proper).
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4851>
We will eventually need to build our own LLVM on Windows in order to
build libclc and other bits which are required for the d3d12 build, as
well as to be able to test SPIR-V/OpenCL on llvmpipe.
Start doing this now, building into the base container, and exercise
this by building llvmpipe under Windows.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4946>
Otherwise, we will fail when the traces description file doesn't
contain any checksum for the specified device.
Fixes: efbbf8bb81 ("tracie: Print results in a machine readable format")
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Rohan Garg <rohan.garg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4839>
The nir_analyze_ubo_ranges pass removes all UBO block 0 loads to reverse
what nir_lower_uniforms_to_ubo() had done, and we only upload UBO pointers
to the HW for UBO block 1-N, so let's just fix up the shader state.
Fixes an off by one in const state layout setup, and some really dodgy
register addressing trying to deal with dynamic UBO indices when the UBO
pointers happen to be at the start of the constbuf.
There's no fixes tag, though this fixes a bug from September, because it
would require the num_ubos fix in nir_lower_uniforms_to_ubo.
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4992>
The hardware issue in the lab preventing jobs from being run on those
machines (and limiting T820 availability), leading to them being
disabled in !4965, has been fixed.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Fixes: 696bafac40 ("CI: Disable Panfrost T7x0 jobs")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5006>
One of the dispatchers in the office (with all the T7x0 boards) has gone
AWOL, and we don't have physical access to restore it. Disable it until
we can get in and fix it.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4965>
robclark found that we needed unique IDs when multiple runners were trying
to report flakes at the same time, but it turns out due to nick limits (16
chars on freenode) we were just getting all the runners appended with
"-142" (or whatever the prefix of the pipelines are these days). And, for
the new flake reporting from baremetal, all the runners ended up being
just "google-freedreno".
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4896>
We were incorrectly taking the merge-request on non-MR pipelines (the
master build after merge) due to a missing '$'. And, for those pipelines,
it would be nice to note whether they're for master or a stable branch.
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4896>
We were failing to tell the allocator about the restriction that scalar
texture instructions (allocated as scalar regs) couldn't be allocated such
that the start of the full unwritemasked vector started before r0. There
was a patch in select_reg_callback on a6xx that tried to work around that,
but you could still end up backed into a corner you shouldn't be because
we didn't tell the RA what it needed.
Fixes compiler assertion failures on a300-a400's blit_z shader, used for
Z32F gmem blits.
Looks like as a result we get tighter register allocation but more nops:
instructions in affected programs: 757945 -> 760356 (0.32%)
nops in affected programs: 317983 -> 320468 (0.78%)
non-nops in affected programs: 27525 -> 27451 (-0.27%)
mov in affected programs: 3098 -> 3023 (-2.42%)
dwords in affected programs: 109664 -> 110656 (0.90%)
last-baryf in affected programs: 112701 -> 112847 (0.13%)
full in affected programs: 4326 -> 4011 (-7.28%)
sstall in affected programs: 120550 -> 120836 (0.24%)
(ss) in affected programs: 13939 -> 13918 (-0.15%)
(sy) in affected programs: 3006 -> 2786 (-7.32%)
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4562>
`wc -l $file` returns the number of lines and the filename.
Fixes: b8c66aeb93 ("ci: Clean up some excessive use of pipes in dEQP results processing.")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4829>
v2:
- Update the default location for the traces when there is no
traces-db entry in the traces definition file (Alexandros).
Fixes: 90a39af5f6 "(ci: Drop the git dependency in tracie)"
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4640>
unreachable was true if the last block is unreachable in the linear cfg,
but it should also be true if it is unreachable in the logical cfg.
Fixes dEQP-VK.graphicsfuzz.for-with-ifs-and-return
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Fixes: 8d8c864beb
('aco: improve check for unreachable loop continue blocks')
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4764>
This lets us get coverage of corner cases of the driver that are tricky to
force a testcase to hit. We don't want to do a full run of the CTS with
each option because that's a lot of runner time, so stack a bunch of
fractional runs in one test job to amortize the test run setup overhead.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4621>
I want to do multiple runs of some bits of the CTS in one test job to test
some driver options, but I want to be able to see the results from any of
them.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4621>
It's easy to get something wrong in the driver build or container or
something that results in falling back to swrast, and then your only clue
was runtime and how your failure cases suspiciously match a swrast
driver's.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4621>
We always want to see status updates happening in the logs, otherwise it
can like maybe your machine hung until the run actually completes.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4621>
We haven't had it enabled due tointermittent failures. Those failures
are, as far as I can tell, due to GPU faults from buffer overflows where a
failing test in a thread stomps an otherwise passing thread's buffers. By
running deqp single-threaded, we can get more consistent failures, at the
cost of needing to do a tiny subset of the tests to keep runtime down.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4685>
Currently only supports PITCAIRN, POLARIS10, VEGA10 and NAVI10
with ACO only, but it's a start.
Unfortunately, we have to duplicate and we will have to try to
keep these lists up-to-date, but it's better than nothing.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4689>
Additionally, purge the winehq-stable package and its dependencies to
avoid crashing when building for s390x.
v2:
- Remove winehq-stable and dependencies for s390x.
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2657
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Daniel Stone <daniels@collabora.com> [v1]
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4678>
This change was missing after acf7e73be5 "(gitlab-ci: make explicit
tracie is gitlab specific)".
Fixes: acf7e73be5 "(gitlab-ci: make explicit tracie is gitlab specific)".
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Rohan Garg <rohan.garg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4638>
Add virglrenderer to the container and use the vtest transport to test
the Gallium driver. On the "host", llvmpipe is used.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4433>
Chocolatey installs depend on downloading binaries from SourceForge,
which is an unreliable host: container builds often fail because it
cannot pick up winflexbison.
Add a loop to retry chocolatey installs if any installs have failed, and
ensure Python is in the accessible PowerShell path rather than relying
on the path being externally refreshed.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4631>
GL spec requires user culling, then clipping then face culling.
llvmpipe was doing clipping then user culling then face culling.
Fix the ordering by adding a new user_cull stage that does the user
culling
Fixes piglit clip_cull-4.shader_test
v2: simplify this a lot (Roland)
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4560>
Tracie main script and traces.yml file talk about repo(sitory) when it
actually means GitLab's project.
Since the script is GitLab's API specific, make it clear.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Rohan Garg <rohan.garg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4496>
Not really needed right now, but seems dangerous to have paths without
the double quote.
I went ahead and used in the rest of values too.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Rohan Garg <rohan.garg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4496>
No need to cache the return value if there is only a single trace
execution call.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Rohan Garg <rohan.garg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4496>
Verify that the Mesa version used when running tracie tests is the
one that was built by CI, rather than any installed distro version.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Rohan Garg <rohan.garg@collabora.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3894>
Without this, the test jobs could spuriously run after the container
job failed or was cancelled, even if the build job didn't run at all.
(I already did this in 94cfe59070, but it
got dropped accidentally in 22d976454f)
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4432>
When running tracie in a docker container, renaming files from
inside the container to a bind-mounted folder on the host causes
a invalid cross-device link due to os.rename limitations.
Switching to shutil allows us to overcome this.
Signed-off-by: Rohan Garg <rohan.garg@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4377>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4377>
Our shared runners are set up for concurrent jobs ~= CPUs / 4 (x86) or 8
(ARM). If you use more build processes than that, then jobs may be
fighting each other for shared system resources, possibly to the point of
failure (we've seen one of the runners OOM on some jobs before, though I'm
not sure if this was the cause).
To try to systematically prevent the problem, we make a ninja wrapper in
the containers that passes the -j flags, and set MAKEFLAGS in the
container builds. This doesn't cover make in non-container builds, but I
believe we don't have any of those.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3782>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3782>
In trying to track down the new failure in #2670, I found that I could get
the flaky test set down to 4 tests, and dropping any remaining test
wouldn't trigger the failure (a bad 8x4 block in the middle of
dEQP-GLES3.functional.fbo.msaa.4_samples.r16f's render target). Disabling
gmem or bypass didn't help, and adding lots of CCU flushing didn't help.
What did help was disabling blitting, or this memset to initialize the
UBWC area after we (presumably) pull a BO out of the BO cache. My guess
is that the 2D blitter can't handle some rare set of state in the flags
buffer and emits some garbage.
I've run 8 gles3 and 7 gles31 runs with this branch now so hopefully I've got the4 right set of flakes marked for removal.
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2670
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4290>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4290>
In preparation for having automated testing with DXGI traces.
v2:
- Updated DXVK version.
- Merged the new Wine container into the existing Vulkan
one (Michel).
v3:
- Updated commit log.
- Use a particular known-good apitrace version (Alexandros).
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4238>
The backports repository can be temporarily inconsistent between
architectures, which can break the docker image build.
Suggested-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4238>
Adds a native build of Mesa using Meson with the Visual Studio 2019
toolchain on a Windows host.
Though Docker is supported on Windows, Docker-in-Docker is not possible,
nor are podman and skopeo available. We handle this by creating the
container from a shell-executor Windows machine, which gives us a native
PowerShell that we can execute Docker from. This attempts to do the same
copy-from-upstream-or-create-if-not-exists optimisation as the
ci-templates do for our Linux builds, albeit open-coded in PowerShell.
The Mesa build itself is executed inside a container, using Meson and
Ninja.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Jose Fonseca <jfonseca@vmware.com>
Acked-by: Brian Paul <brianp@vmware.com>
Acked-by: Eric Engestrom <eric@engestrom.ch>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4304>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4304>
We are currently comparing a hex string representation of the git lfs
OID with a byte array representation of the locally calculated OID,
causing detection of valid cached traces to fail. Ensure we are
comparing compatible representations (in this case hex strings).
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4300>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4300>
The FILES_HOST_URL & FILES_HOST_NAME will be in the Baylibre's runner
environment, move them into the t860/t720/t760 jobs using Collabora's
runner.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4295>
Currently, we store the kernel and ramdisk for each LAVA job in the
artifacts of the job that built them. Because artifacts are stored in
GCE and LAVA labs aren't, this causes a lot of egress with is expensive.
To avoid this, have runners download most of the data via the (cached)
container images once, and for each job upload the kernel and ramdisk to
a server outside GCE.
Right now we only have Collabora's runner with a local web server, so
jobs that go to Baylibre's lab have been disabled.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4295>
There's some files from the .gitlab-ci directory that are needed in the
test stage and that, because the Mesa repository isn't checked out in
that stage, need to be made available through other means.
Because those files are going to be needed in LAVA devices, place them
ino the tarball containing the built files so it's available to both
gitlab-ci runners and LAVA devices.
Before those files were passed in the artifacts of the Gitlab CI job,
but this commit places them into the built tarball so scripts later in
the pipeline don't need to account for this discrepancy.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4295>
After 90a39af5f6 ("ci: Drop the git dependency in tracie"), we have
this error in the radv-polaris10-traces job:
"
...
+ /builds/tanty/mesa/artifacts/tracie/tests/test.sh
tracie_succeeds_if_all_images_match: Fail
Traceback (most recent call last):
File "/tmp/tracie.test.glY0O23HJo/tracie.py", line 6, in <module>
import requests
ModuleNotFoundError: No module named 'requests'
...
"
v2:
- Updated commit log to be more descriptive (Michel).
Fixes: 90a39af5f6 ("ci: Drop the git dependency in tracie")
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4237>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4237>
Fragment shader can write depth and stencil if we set necessary flags
in RSW. In addition to that we need to use special format for Z24S8.
Original format is apparently Z24X8 since we can't sample stencil in GLES2.
This new format also seems to use several components for storing depth
since we saw r != g != b when sampling with this format.
[vasily: - initialize clear->depth to 0xffffff if we reload depth, just
like blob does. Reloading doesn't work otherwise
- use single bitmap for reload type]
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Andreas Baierl <ichgeh@imkreisrum.de>
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4197>
Following on from the db410c conversion to baremetal testing, reuse the
same scripts in the same rack to run 7 db820c boards (#4/8 is failing in
the bootloader for unknown reasons).
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4177>
This should reduce our container rebuild times, particularly on the
40-minute ARM build (which is split across only 2 runners and thus likely
to have a hot cache) when working on updating containers.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4099>
Instead of using git, use python and the Gitlab API
to fetch traces. This helps us slim down our ramdisks
in preparation for integrating trace replay on LAVA
devices.
Signed-off-by: Rohan Garg <rohan.garg@collabora.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4000>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4000>
In preparation for using apitrace to replay traces in LAVA jobs, build a
newer waffle so apitrace can use the surfaceless EGL platform.
As things were before this commit, Xvfb would have been needed in the
LAVA images.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4000>
GP doesn't support ftrunc natively and unfortunately one in generic
opt_algebraic is not GP-friendly either. Introduce our own lowering
that utilizes fsign() that GP supports:
ftrunc(a) = fmul(fsign(a), ffloor(fmax(a, -a)))
Tested-by: Andreas Baierl <ichgeh@imkreisrum.de>
Reviewed-by: Andreas Baierl <ichgeh@imkreisrum.de>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4126>
if $DEQP_PARALLEL is not set, it will use the maximum number of
jobs instead of 1.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4179>
The lava tags was a python array not it's a gitlab CI string,
slit the string with periods in the jinja2 template to avoid having
the following tags :
tags:
- p
- a
- n
- f
- r
- o
- s
- t
instead of :
tags:
- panfrost
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4057>
This supports powering up the device (using an external tool you
provide based on your particular lab), talking over serial to wait for
the fastboot prompt, and then booting a fastboot image on a target
device.
I was previously relying on LAVA for this, but that ran afoul of
corporate policies related to the AGPL. However, LAVA wasn't doing
too much for us, given that gitlab already has a job scheduler and
tagging and runners. We were spending a lot of engineering on making
the two systems match up, when we can just have gitlab do it directly.
Lightly-reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4076>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4076>
The debian firmware package doesn't actually contain it, costing us a
minute of boot time waiting for it to show up.
Lightly-reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4076>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
It was added with tracie, but it doesn't depend on it.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Commit 0406ea4856 ("panfrost: Z24 variants should be sampled as
R32UI") causes a regression when depth textures are sampled.
It's still not clear how MALI_Z32 can work for for Z32 and Z24{S,X}8,
but let's leave that question for later.
Reported-by: Icecream95 <ixn@keemail.me>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4101>
For now tests only use these drivers:
* llvmpipe
* softpipe
* freedreno
* lima
* etnaviv
* panfrost
So using rules:changes gitlab feature to run the tests when the changes
made are potentially affecting these drivers.
A few notes:
* the following code:
.piglit-test:
extends:
- .test-gl
- .llvmpipe-rules
makes gitlab replace .test-gl "rules:changes" values by the one from
".llvmpipe-rules".
* rules:changes always matches for non-MR new branches so jobs will always be
created (and they'll be run if their dependencies are run). For pushes to
existing branches the files changed by the push are used to match the
rules:changes path.
* the same gitlab feature could be used for some build jobs
Acked-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2569>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2569>
RADV_FORCE_FAMILY forces creating a null device that allows RADV
to be instanced without AMDGPU.
The Fossilize database only contains pipelines from the Sascha
Vulkan triangle demos at the moment. I will add more once this
is merged.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3960>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3960>
Fossilize is equivalent to vkpipeline-db but it's definitely more
robust. This is based on the CI traces system.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3960>
The stages and mapping of jobs to them are somewhat arbitrary; the goal
is to avoid having to scroll through large numbers of jobs.
v2: (Pierre-Eric Pelloux-Prayer)
* Use even more stages for test jobs
* Give somewhat meaningful names to stages
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3995>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3995>
Also, adds an example job for radv.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
In preparation to having "vk" (Vulkan) along "gl" (OpenGL/ES).
This is so it is clearer which traces belong to which API and also for
the build jobs.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>