According to RFC 4189 CSV files should be encoded using CRLF newlines,
not LF. This helps compatibility with tools, like python's csv module,
who always uses CRLF.
While we're at it, normalize the one CSV that was CRLF in-repo to LF,
and let git do the newline-normalization when needed instead.
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12405>
Rather than using always the same metric set, let the user choose when
starting the producer with :
INTEL_PERFETTO_METRIC_SET=RasterizerAndPixelBackend ./build/src/tool/pps/pps-producer
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rohan Garg <rohan.garg@intel.com>
Acked-by: Antonio Caggiano <antonio.caggiano@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13996>
Because these formats are introduced trough an extension, their
enum values are exceedingly large and we cannot use them to index
directly into the format table we had for core formats. Instead,
we put these in a separate table and we always use the
VK_ENUM_OFFSET helper to index into these tables.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14533>
V3D does not support formatless writings.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14288>
Between a troubles with Marge and FD.O, and requests for a bit more
time for a few patches to land, we're going to bump the release out by
three weeks.
Acked-by: Caio Oliveira <caio.oliveira@intel.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Acked-by: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14502>
This splits application-provided FMA in vertex/geometry/tesselation/mesh
shaders.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14458>
Occlusion queries are supported always but only the number of
supported samples differ.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14361>
Occlusion queries are supported always but only the number of
supported samples differ.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14361>
- gen4 - has dp4acc and dp2acc, dp4acc is used to implement
4x8 dot product.
- gen3 - has dp2acc, in OpenCL blob uses dp2acc for dot product
on both get3 and gen4.
- gen2 - unknown, lower everything.
- gen1 - no dp2acc, lower everything. OpenCL blob doesn't advertise
cl_qcom_dot_product8 but still generates code for it.
The assembly is more verbose and uses yet to be documented
mad32.u16 instruction.
Passes:
dEQP-VK.spirv_assembly.instruction.compute.opsdotkhr.*
dEQP-VK.spirv_assembly.instruction.compute.opudotkhr.*
dEQP-VK.spirv_assembly.instruction.compute.opsudotkhr.*
dEQP-VK.spirv_assembly.instruction.compute.opsdotaccsatkhr.*
dEQP-VK.spirv_assembly.instruction.compute.opudotaccsatkhr.*
dEQP-VK.spirv_assembly.instruction.compute.opsudotaccsatkhr.*
Only packed 4x8 unsigned and mixed versions are accelerated.
However in theory we should be able to do better for signed version
than current NIR lowering.
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13986>
Softpipe was the only driver still using this feature. I had enabled it
in ba22f014f9 ("softpipe: Enable PIPE_CAP_TGSI_ANY_REG_AS_ADDRESS;") for
an instr count win, but it's really not important to that driver and it's
not worth keeping the knob around just for that.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14360>
We don't plan to support NV_mesh_shader officially on RADV,
because it performs poorly on AMD hardware. However, we are
implementing this extension to get some experience with mesh
shader technology.
Users should not rely on this support because we are going
to remove it if/when a potential cross-vendor extension appears.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13580>
There exists hardware intel gen4 specifically that has only 6 clip planes
but supports GLSL 1.30. This enhances the CAP so that the current values
of 0,1 remain the same, but giving it a larger number will override the
max.
This allows the gen4 intel to set this to 6 and leave everyone else alone.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14344>
These are always going to be on with gallium
v2: drop call, tidy up switch (kwg)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14261>
- Default c_std is now c11, no need to workaround
89b4f337d5 ("c_std=c11 in meson default_options")
- gallium-xlib has been renamed to xlib:
76791db088 ("mesa/x11: Remove the swrast-classic-based fake libGL")
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14216>
RGP doesn't support previous generations. This can be enabled with
RADV_THREAD_TRACE_CACHE_COUNTERS=true.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13737>
We're not going to move this directory like this comment suggests, as
the suggested target no longer exists. Let's just drop the mention.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14079>
This was useful for emulating GL 3.2 in virgl on a GLES3 host renderer,
before GL_EXT_depth_clamp introduced the ability for hardware drivers to
expose the feature on GLES. Now that we have that, the desktop-GL-capable
HW that virgl cares about can expose desktop GL even on its GLES renderer
on the host without this emulation. I don't think anyone particularly
cares about hitting higher GL versions on actually-core-GLES hosts with
virgl.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13729>
It's a *long* time since SGI was the copyright holder for the OpenGL
trademark. And we implement more APIs by now, so let's update the
disclaimer to instead redirect to the Khronos licensing page for
details.
While we're at it, soften the language on legal status as a formal
implementation, as we currently have conformant drivers for most of the
APIs by now. But refer to the Khronos website for details, as
conformance status for drivers are subject to change.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13833>
Through their specific PIPE_CAP.
v2 (Iago)
- Add comment in test failure
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13409>
This capability is enabled for drivers supporting formatless image
writing in shader.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13409>
Move all the NIR related debug environmental variables in a single
NIR_DEBUG one.
Use NIR_DEBUG=help to print all the available options.
v2:
- Use a macro to simplify (Marcin, Jason)
- Remove wrong changes (Marcin)
v3 (Marcin):
- Remove rendundant NIR mentioning in option descriptions.
- Unwrap option descriptions.
- Ensure the constant is unsigned.
- Use extern array to remove switch.
v4:
- Add missing kernel shader (Jason).
- Add unlikely() (Marcin).
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13840>
When using the Vulkan API, command buffers can be recorded way before
perfetto is enabled. This can be problematic if you want already
recorded command buffers to produce traces.
This new environment variable makes perfetto enabled internally so
that command buffers are recorded with timestamps, even though no
perfetto recording happens.
v2: rename to GPU_TRACE_INSTRUMENT (Rob)
v3: Move instrumentation check to generated headers (Danylo)
Decouple instrumentation enabling from tracing (Danylo)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13911>
It was a bit trickier to RE, since blob doesn't expose this
functionality at all, however we had a clue from the very beginning:
lima_blend_factor is 3 bits, i.e. 8 values, but only 5 of them were
used, it just waited till someone tried what 3 unused values do.
Interestingly enough, it turns out "5" works just as "0" (which is
PIPE_BLENDFACTOR_*SRC_*), but only if output register for gl_FragColor
is $0, So it looks suspiciously similar with PIPE_BLENDFACTOR_*SRC1_*
behavior, and looks like secondary output is taken from $0.
Since output regs for all other outputs are configured via RSW, there
must be a field in RSW for output register for secondary color, it's
likely 4 bits and it's currently set to 0 for reg $0.
Then it was just a matter of brute-forcing various consecutive 4 bits
in RSW - and indeed, setting top 4 bits of rsw->aux0 to the index of
gl_FragColor output register fixes blending tests when we use "5"
blend factor instead of "0".
So it must be a register number for gl_SecondaryFragColor. Unlike
gl_FragColor, the field is only repeated once in RSW.
Wire it up in compiler, and piglit arb_blend_func_extended now passes.
Reviewed-by: Andreas Baierl <ichgeh@imkreisrum.de>
Reviewed-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13873>
We don't advertise bufferDeviceAddressCaptureReplay capability and
neither does blob, because at the moment there is no way to allocate
bo with predefined iova.
There is no support of any arithmetic with addresses since shaderInt64
is not enabled. However, we could enable int64 support whenever we want.
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8717>
this reworks PIPE_CAP_PREFER_BLIT_BASED_TEXTURE_TRANSFER into an
enum as PIPE_CAP_TEXTURE_TRANSFER_MODES, enabling drivers to choose
a (sometimes) faster, compute-based download mechanism based on a new
pipe_screen hook
compute pbo download is implemented using shaders with a prolog to convert
the input format to generic rgb float values, then an epilog to convert
to the output value. the prolog and epilog are determined based on a vec4
of packed ubo data which is dynamically updated based on the API usage
currently, the only known limitations are:
* GL_ARB_texture_cube_map_array is broken somehow (and disabled)
* AMD hardware somehow can't do depth readback?
otherwise it should work for every possible case
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Acked-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11984>
Using 1 bit per wrap mode looked very suspicious and after some
experiments it turns out it's 3-bit enum.
Border color is also here, it sits right after depth field. For
some reason it uses 16 bit per channel just like for clear color in RSW
GL_CLAMP mode is broken for nearest filter just as on Midgard, so add
the same workaround - use GL_CLAMP_TO_EDGE for nearest filter.
Reviewed-by: Andreas Baierl <ichgeh@imkreisrum.de>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13213>
This adds a new vk_queue_submit object which contains a list of command
buffers as well as wait and signal operations along with a driver hook
which takes a vk_queue and a vk_queue_submit and does the actual submit.
The common code then handles spawning a submit thread if needed, waiting
for timeline points to materialize, dealing with timeline semaphore
emulation via vk_timeline, etc. All the driver sees are vk_queue.submit
calls with fully materialized vk_sync objects which it can wait on
unconditionally.
This implementation takes a page from RADV's book and only ever spawns
the submit thread if it sees a timeline wait on a time point that has
not yet materialized. If this never happens, it calls vk_queue.submit
directly from vkQueueSubmit() and the thread is never spawned.
One other nicety of the new framework is that there is no longer a
distinction, from the driver's PoV, between fences and semaphores. The
fence, if any, is included as just one more signal operation on the
final vk_queue_submit in the batch.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13427>
It's a bit on the over-complicated side but the objective is to make the
debug log messages show up in the same thread as the first
VK_ERROR_DEVICE_LOST so we don't massively confuse the app. It's
unknown if this is actually ever a problem but, with submit happening
off on its own thread, logging errors from threads the client doesn't
know about doesn't seem like a massively great plan.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13427>
Driver should enable this cap if it prefers varyings to be aligned
to power of two in a slot, i.e. vec4 in .xyzw, vec3 in .xyz, vec2 in .xy
or .zw
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13151>
This allows specific per-application override.
The existing MESA_EXTENSION_OVERRIDE env variable is kept.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13364>
vulkan requires that vertex attribute access be aligned to the size of
a component for the attribute, but GL has no such requirements
the existing alignment caps are unnecessarily restrictive for applying
this limitation, so this cap now pre-calculates the masks for elements
and vertex buffers in vbuf to enable rewriting misaligned buffers
Acked-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13556>
By default line mode is VK_LINE_RASTERIZATION_MODE_RECTANGULAR_EXT,
when lineRasterizationMode is VK_LINE_RASTERIZATION_MODE_BRESENHAM_EXT
and primtype is line - we enable bresenham line mode.
We have to disable MSAA when bresenham lines are used, this is
a hardware limitation and spec allows it:
"When Bresenham lines are being rasterized, sample locations may
all be treated as being at the pixel center (this may affect
attribute and depth interpolation)."
This forces us to re-emit msaa state when line mode is changed.
Signed-off-by: Hyunjun Ko <zzoon@igalia.com>
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6020>
This doesn't actually use the functionality or implement prolog
compilation yet.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11717>
This is mostly a matter of auditing uses of
cmd->state.framebuffer and replacing every use of fb->attachments with
cmd->state.attachments. We already weren't using the attachments
anywhere outside of the render pass, so this is pretty straightforward.
We also don't have any use for anything in
VkFramebufferAttachmentImageInfo so we can just ignore it.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13228>
This commit enables NGG culling on all GFX10.3 GPUs by default.
A new debug flag environment variable RADV_DEBUG=nonggc is added to
disable this feature on GPUs where it is enabled by default.
The previous perf test flag RADV_PERFTEST=nggc will not be needed on
GFX10.3 anymore but it can still be used to enable the feature on
GPUs where it isn't on by default.
Totals from 58239 (45.27% of 128647) affected shaders:
VGPRs: 1989752 -> 2049408 (+3.00%); split: -3.21%, +6.21%
SpillSGPRs: 675 -> 883 (+30.81%); split: -78.07%, +108.89%
CodeSize: 72205968 -> 153572764 (+112.69%)
LDS: 0 -> 227125248 (+inf%)
MaxWaves: 1614598 -> 1646934 (+2.00%); split: +3.08%, -1.08%
Instrs: 14202239 -> 29654042 (+108.80%)
Latency: 87986508 -> 136960419 (+55.66%); split: -0.23%, +55.89%
InvThroughput: 14444832 -> 21141875 (+46.36%); split: -0.01%, +46.37%
VClause: 340794 -> 493067 (+44.68%); split: -1.33%, +46.01%
SClause: 520983 -> 738636 (+41.78%); split: -0.25%, +42.03%
Copies: 775639 -> 2787382 (+259.37%)
Branches: 296911 -> 1225431 (+312.73%)
PreSGPRs: 1316896 -> 2057270 (+56.22%); split: -0.14%, +56.36%
PreVGPRs: 1473558 -> 1658432 (+12.55%); split: -1.44%, +13.99%
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13086>
v2: Use u_foreach_bit64() (Samuel)
v3: Add missing handling of VkMemoryBarrier2KHR in pNext of
VkSubpassDependency2KHR (Samuel)
v4: Remove unused ANV_PIPELINE_STAGE_PIPELINED_BITS (Ivan)
v5: fix missing anv_measure_submit() (Jason)
constify anv_pipeline_stage_pipelined_bits (Jason)
v6: Split flushes & invalidation emissions on
vkCmdSetEvent2KHR()/vkCmdWaitEvents2KHR() (Jason)
v7: Only apply flushes once on events (Jason)
v8: Drop split flushes for this patch
v9: Add comment about ignore some fields of VkMemoryBarrier2 in
VkSubpassDependency2KHR (Jason)
Drop spurious PIPE_CONTROL change s/,/;/ (Jason)
v10: Fix build issue on Android (Lionel)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9045>
The main motivation is to improve the score of viewperf13/snx.
This new interface is designed to be optimal for display lists as implemented
by the vbo module. It has much lower CPU overhead in the frontend, threaded
context, and the driver.
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13050>
This was initially written by Mark Janes, and was part of MR 7354.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Mike Blumenkrantz <michael.b.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13043>
- Change section name to be more general
- Remove INTEL_SCALAR_VS (dropped as part of release 20.3)
- Sort alphabetically
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Mike Blumenkrantz <michael.b.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13043>
Was useful in testing a difference between D3D and VK ATOC rendering earlier today, would be nice to check this more easily in future.
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13069>
Below were missed in the last update:
VK_KHR_incremental_present
VK_KHR_swapchain_mutable_format
Signed-off-by: Yiwei Zhang <zzyiwei@chromium.org>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12980>
This helps to get a really nice and aligend disasm output.
Just use :align=X to define where in the line the field
should be printed.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11321>
Android.mk was removed, so remove a reference to it from Panfrost
documentation. We should document building for Android, but it'll be
through meson. This note as-is adds more confusion than note.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12914>
This is required for d3d10+, which has depth_clamp always enabled
regardless of depth_clip (in contrast to OpenGL, where enabling
depth_clamp disables depth_clip). There doesn't seem to be a GL
extension for it, but it will be used for lavapipe to implement
VK_EXT_depth_clip_enable.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12260>
We disabled PIPE_CAP_PRIMITIVE_RESTART on ffc4d82438 ("v3d: Disable
PIPE_CAP_PRIMITIVE_RESTART") because the HW can only support
PIPE_CAP_PRIMITIVE_RESTART_FIXED_INDEX subset.
But the introduction of PIPE_CAP_EMULATE_NONFIXED_PRIMITIVE_RESTART
allows us to support these nonfixed primitive restarts so we can now
re-enable NV_primitive_restart for OpenGL extensions.
Acked-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12669>
Everything should be already supported, except patch list.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12611>
The prior method of checking the result of getenv() for NULL would cause
the feature to be enabled for INTEL_NO_HW=0.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12007>
This extension relaxes the alignment requirements to allow the GL std430
layout to be used. freedreno/ir3 already supports this (via
PIPE_CAP_LOAD_CONSTBUF).
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12495>
We would like draw-only display lists to have immutable draw info and
this is the only GL non-draw state in pipe_draw_info (not counting
view_mask).
It also allows removing some code from draw_vbo for tessellation.
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12351>
The two rasterpos fails looks related to GLSL linking, the vertex
shader is linked with the geometry shader which doesn't use any
of it's outputs so they seem to get removed, which stops the rasterpos
from working.
Reviewed-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12374>
meson complains that =false is deprecated and that we should use
=disabled instead.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12344>
Restore part of the perfetto documentation deleted by mistake.
Signed-off-by: Antonio Caggiano <antonio.caggiano@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11846>
When downloading traces from a restricted repository, the Authorization
header will be set. Previous to this change, the http proxy would drop
it.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6441>
Add a job to test with traces that we cannot redistribute, listed in a
separate file. Since those traces might not be accessible by everyone,
this job is created only when the pipeline is triggered by `marge-bot`.
This job is optional because otherwise it could be blocking a merge
request of someone who cannot really debug the issue due to lack of
access to these traces.
The documentation available under `docs/ci` goes into more details
explaining the rationale behind optional traces.
Signed-off-by: Antonio Caggiano <antonio.caggiano@collabora.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6441>
Some floating atomic instructions are not available on GFX8-9.
No LLVM support.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12060>
v1. Hyunjun Ko <zzoon@igalia.com>
- Add to hanlde VK_DESCRIPTOR_POOL_CREATE_HOST_ONLY_BIT_VALVE
- Don't support VK_DESCRIPTOR_TYPE_INPUT_ATTACHMENT and
VK_DESCRIPTOR_TYPE_COMBINED_IMAGE_SAMPLER
v2. Hyunjun Ko <zzoon@igalia.com>
- Fix some indentations and nitpicks.
- Add the extension to features.txt
v3. Hyunjun Ko <zzoon@igalia.com>
- Remove unnecessary asserts.
Signed-off-by: Eduardo Lima Mitev <elima@igalia.com>
Signed-off-by: Hyunjun Ko <zzoon@igalia.com>
Reviewed-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9322>
Currently we don't enable it on any chip by default, but
we plan to enable it soon on GFX10.3 when we are comfortable
with its performance.
RADV_PERFTEST=nggc environment variable enables it on GFX10+ GPUs.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10525>
We currently require VK_EXT_line_rasterization with *all* optional
features to render all kinds of lines required. Because some (if not
all) of these can be emulated, let's make the list explicit, so it's
easy to remove items as we implement emulation.
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11795>
Android.mk files haven't really been supported by Mesa devs for a long
time. Most of us have been willing to update Makefile.sources if we
remember and sometimes we try to blind code some Android.mk for a new
generator. However, the reality is that it breaks regularly and ends up
being maintained by the Android community. To address this problem
another approach was implemented in !10183 utilizing the maintained
meson build system. The old Android.mk files are no longer required.
This commit was created with the following commands:
git rm **/Android.mk
git rm **/Android.*.mk
git rm **/Makefile.sources
git rm CleanSpec.mk
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/4487
Acked-by: Roman Stratiienko <r.stratiienko@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9728>
this is another prim type bitmask which will trigger automatic draw rewriting
to a direct draw any time a prim-restart draw occurs with a prim type that is
not supported by the driver for prim restart, even if that prim type is supported
for normal drawing
the default is set to all prim types to preserve existing functionality, and PrimitiveRestartForPatches
is now explicitly set to false because no driver supports it
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10973>
drivers can now export a bitmask of the primitive types they support,
and all others will be automatically be rewritten
the default value is set to all primitive types supported to preserve
existing behavior
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10973>
for drivers that set it, this now automatically handles restart index rewriting
by running draws through primconvert when necessary
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10973>
This is annoying and tricky and we don't have all the gory details
written down in one central place anywhere. Add a docs section on it.
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11500>
This env var was introduced in a182adfd83 ("wsi: allow to override the
present mode with MESA_VK_WSI_PRESENT_MODE").
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11441>
About half or more of the text here is actually from Connor Abbot. I've
edited it a bit to bring it up-to-date and make a few things more clear.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11438>
Similar to the last few commits, we require Meson 0.52 now. There's no
point in confusing users with specifying what versions supports what
here, as all supported versions works the same way now.
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11464>
This commit mostly just adds the framework required to scrape
documentation out of the ISL sources and headers. The method chosen
here is a combination of doxygen and breathe (a sphinx extension for
doxygen integration). I'll freely admit that doxygen is pretty terrible
but it seems like the best option we have available to us today.
Acked-by: Emma Anholt <emma@anholt.net>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Erik Faye-Lund <erik.faye-lund@collabora.com>.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11366>
We only support the VariablePointersStorageBuffer feature for now,
which is the only one that is mandatory, and for which we seem to
be passing all the relevant tests already.
Exposing the optional VariablePointers feature would require that
we support non-constant indexing on UBO/SSBO first.
Relevant CTS tests:
dEQP-VK.*pointer*
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11257>
Since the move from master to main, our "Edit on GitLab" links on
docs.mesa3d.org has been pointing to the wrong branch.
Let's fix this, so we don't confuse users who want to contribute
changes.
Acked-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11160>
This extension is basically only wrapping SPV_KHR_storage_buffer_storage_class
which is entirely implemented in the SPIR-V frontend.
Relevant CTS tests:
dEQP-VK.glsl.opaque_type_indexing.ssbo_storage_buffer_decoration.*
dEQP-VK.spirv_assembly.*
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11184>
This add a simple mechanism to select which GPU adapter the d3d12
driver should be using. A new environment variable is introduced.
MESA_D3D12_DEFAULT_ADAPTER_NAME
This represent a substring to search for in the GPU descrition,
for example "NVIDIA" or "INTEL", or "NVIDIA GeForce RTX 3090",
etc...
GPU are searched in order and the first one to include the substring
becomes a match. If no match is found, we default to the first
enumerated GPU.
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10710>
This hardware supports all of the points of ES 3.1 with the minor
exception of non-red gather operations.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Pierre Moreau <dev@pmoreau.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10569>
There's a few more drivers that we have docs for that we didn't link to
from the systems article yet. Let's fix that.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11109>
Instead of linking directly to the Freedreno wiki, let's link to the
driver docs, and then put a link to the Freedreno wiki there.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11109>
Instead of linking directly to openswr.org, let's link to the driver
docs, and have the driver-docs link to the project-webiste.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11109>
This driver was removed in 435de835cd ("swrast: Remove the classic
swrast DRI driver"), but we forgot to update the documentation to
reflect that.
Better late than never!
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11109>
No other drivers use the vendor in the title or path, so it seems better
to not do this for the vmware-guest driver as well. So let's rename it
to SVGA instead. The actual text itself makes it clear enough what it is
about.
This makes it stand out less in the toctree.
I chose the name "WMware SVGA3D", because that's less ambigious than the
"SVGA"-alternative, and was requested by VMware people.t
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Acked-by: Jose Fonseca <jfonseca@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11109>
This adds a few missing APIs (like Vulkan), and reorders the list to
match the order we're listing them on the frontpage of mesa3d.org.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11109>
We support all versions of OpenGL ES, no need to point out each version.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11109>
It seems something went wrong during conversion of this article (or
maybe even before in the HTML version), where every header after the
"Gallium environment variables" header was nested below it.
That's clearly not what's meant here, so let's fix that.
This makes the toctree make a bit more sense for this article.
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11106>
This provides most of the implementation, but there are some
things we cannot enable until we improve of kernel submit
interface, namely:
We don't expose capacity to export SYNC_FD, although we do
have the implementation in place. This requires that we
improve our kernel interface and event wait implementation
first so we can cover the corner case where the application
submits a command buffer that includes a VkCmdWaitForEvents
and tries to export a SYNC_FD from its signal semaphores or
fence before it the event is signaled and the command buffer
is sent to the kernel for execution in full.
Likewise, we can't currently import semaphores. This is because
our current kernel submit interface can only take one syncobj.
We have been working around this so far by waiting on the last
syncobj produced from the device whenever we had to wait on any
semaphores (which is obviously suboptimal already), but this
won't work as soon as we allow importing external semaphores,
as those could (and would typically) be produced from a
different device.
Once we address the kernel bits, we should come back and enable
SYNC_FD exports as well as semaphore imports.
Relevant CTS tests:
dEQP-VK.api.external.fence.*
dEQP-VK.api.external.semaphore.*
dEQP-VK.synchronization.cross_instance.*
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11105>
So we don't need to provision aarch64 servers, which are these days
rarer than x8_64.
In the switch to the new runner tags, switch to one which contains the
device type, so we can dimension the runner jobs taking into account the
number of DUTs available.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11108>
In the last round of IRC link updates, #freedesktop hadn't moved yet. Now
it has, so let's update the reference.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Clayton Craft <clayton@craftyguy.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10975>
I didn't initially update this one because craftguy hadn't moved to OFTC
when I wrote the last patch. But now he has, so let's also update this
reference.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Clayton Craft <clayton@craftyguy.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10975>
DFSM has never been enabled by default because it was slower.
RadeonSI is also dropping support for this because they discovered
that's actually not efficient in practice.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10968>
We don't have any special restrictions associated with the number
of descriptors in a set other than maybe not exceeding what we can
put in a single memory allocation, so in practice, applications will
be limited by the per-stage contraints defined by other Vulkan limits.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10970>
We don't do anything for input attachment aspects read by a subpass
since it doesn't have performance implications for us.
We also ignore the the new depth stencil layouts because they don't
have practical implications for our implementation.
We also ignore the new usage info for views since we are not currently
making decisions about views based on their usage.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10951>
Similar to the other channels, #lima is also moving to OFTC, so let's
update the links as appropriate.
While we're at it, fix the URI scheme to use a slash as a host/channel
separator, and drop the hash for maximum compatibility.
Reviewed-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10917>
Panfrost has already moved their IRC-channel to OFTC, so let's update
the docs as well.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10917>
We have decided to follow what's happening with #dri-devel for #zink as
well, so let's update our link there as well.
While we're at it, let's switch the link to an anonymous link, because
we're not referring to it anywhere, so it doesn't need to be named.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10917>
Due to the recent changes at Freenode and the recommendation from the
X.Org board of moving to OFTC[1], many mesa-developers have moved over
to the #dri-devel channel on OFTC by now.
So let's promote that channel rather than the Freenode channel.
While we're at it, let's correct[2] the URI to use a slash to separate
between the host and channel. And omit the # from the channel name for
maximum compatibility.
[1]: https://lists.freedesktop.org/archives/mesa-dev/2021-May/225271.html
[2]: https://en.wikipedia.org/wiki/Internet_Relay_Chat#URI_scheme
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10917>
It seems this gives 2-3% improvements most of the time. This also
enables DCC for concurrent images.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10454>
We support this extension on Zink even if we don't support ES 3.2,
because the compatibility extension doesn't require advanced blending.
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10861>
Since 70813c1c13 ("meson: Remove kmsro from gallium-drivers"), it is no
longer necessary to include kmsro in the gallium-drivers list; kmsro
will be automatically enabled if it may be required. Simplify the docs
for lima and panfrost accordingly to reflect the change.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10727>
This GLES extension allows to combine the formats BGR and BGRA
as host-side formatsto be combined with the internal formats
RGB8/SRGB8 and RGBA8/SRGB8_ALPHA8 respectively.
This extension is of interest to support a subset of OpenGL in
virtualized environments where the host only supports GLES.
Initial mesa/glformat.c patch: rohan.garg@collabora.com
v2: - Correct names for ClearTexture calls
- Add BGR(A)_EXT tokens
- Add format check for BGR_EXT
(All Adam Jackson)
v3: Fix ordering in extension table (Marge)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com> (v2)
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10613>
Add documentation for Perfetto and Gfx-pps, together with some perfetto
config files to use as a starting point.
Signed-off-by: Antonio Caggiano <antonio.caggiano@collabora.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Emma Anholt <emma@anholt.net>
Reviewed-by: John Bates <jbates@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9652>
This only implements dynamic primitive restart enable, depth bias
enable and rasterizer discard enable. I leave logic op and patch
control points for later.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10340>
It seems building the doxygen docs has bit-rotted over time, and now
generates a set of empty modules, apart from some basic descriptions.
Since Mesa is mostly implementing externally documented APIs, I don't
think it makes a whole lot of sense trying to fix this, and I think the
presence of these files might confuse users who try them out.
So let's just get rid of this.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10611>
Erik Faye-Lund
Lionel Landwerlin
Jesse Natalie
Iago Toral Quiroga
Juan A. Suarez Romero
Eric Engestrom
Dylan Baker
Rhys Perry
Christian Gmeiner
Danylo Piliaiev
Guilherme Gallo
Emma Anholt
Timur Kristóf
Markus_included
Qiang Yu
Dave Airlie
Pavel Ondračka
Jason2013
Alyssa Rosenzweig
Thomas H.P. Andersen
Adam Jackson
Samuel Pitoiset
Erik Faye-Lund
Timothy Arceri
Jan Zielinski
Bas Nieuwenhuizen
Alejandro Piñeiro
Vasily Khoruzhick
Mike Blumenkrantz
Joshua Ashton
Jason Ekstrand
Hyunjun Ko
Marek Olšák
Pierre-Eric Pelloux-Prayer
Ella-0
Esme Xuan Lim
Connor Abbott
Michel Zou
Thomas Wagner
Luis Felipe Strano Moraes
Yiwei Zhang
Alyssa Rosenzweig
Andreas Baierl
Roland Scheidegger
Icecream95
Jose Maria Casanova Crespo
Nanley Chery
Matt Turner
Filip Gawin
Antonio Caggiano
Tomeu Vizoso
Eduardo Lima Mitev
Caio Marcelo de Oliveira Filho
Andreas Bergmeier
Rob Clark
Simon Zeni
Simon Ser
Chia-I Wu
Charlie
Charlie Birks
Georg Lehmann
Hubert Jasudowicz
Steve Pronovost
Ilia Mirkin
Tapani Pälli
Petr Vaněk
Daniel Stone
Ryan Houdek
Gert Wollny
Jordan Justen