This should be OUT_RELOC() since the operation isn't writing to the
buffer. Technically it doesn't matter much currently, since we'd
anyways to a gmem2mem later. But that will change.
Signed-off-by: Rob Clark <robdclark@gmail.com>
When binding a new pipeline, we applied all dynamic states
without checking if they really need to be re-emitted. This
doesn't seem to be useful for the meta operations because only
the viewports/scissors are updated.
This should reduce the number of commands added to the IB
when a new graphics pipeline is bound.
Also, rename radv_dynamic_state_copy() to radv_bind_dynamic_state()
and set the dirty flags directly there.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
The depth bounds test values are either set at pipeline
creation or dynamically using vkCmdSetDepthBounds().
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
From the OpenGL 4.6 spec, section 4.4.1 Input Layout Qualifiers, Page 68,
(Location aliasing):
"Further, when location aliasing, the aliases sharing the location
must have the same underlying numerical type (floating-point or
integer)."
The current implementation is too strict, since it checks that the
the base types are an exact match instead.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
v2:
- we only need to validate inputs to the first stage and outputs
from the last stage, everything else has already been validated
during cross_validate_outputs_to_inputs (Timothy).
- Use MAX_VARYING instead of MAX_VARYINGS_INCL_PATCH (Illia)
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
For non-SSO programs, we only need to validate outputs, since
the cross validation of outputs to inputs will ensure that we
produce linker errors for invalid inputs too.
Hoever, for the SSO path there is no output to input validation,
so we need to validate inputs explicitly. Generalize the function
so it can handle this as well.
Also, notice that vertex shader inputs and fragment shader outputs
are already validated in assign_attribute_or_color_locations()
for both SSO and non-SSO paths, so we should not try to validate
that here again (in fact, the function would require explicit
paths to handle these two cases properly).
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Currently, we only validate explicit locations for non-SSO programs.
This creates a helper that we can call from both SSO and non-SSO paths
directly, so we can reuse all the logic behind this.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
From ARB_enhanced_layouts:
"[...]when location aliasing, the aliases sharing the location
must have the same underlying numerical type (floating-point or
integer) and the same auxiliary storage and
interpolation qualification.[...]"
Add code to the linker to validate that aliased locations do
have the same aux storage.
Fixes:
KHR-GL45.enhanced_layouts.varying_location_aliasing_with_mixed_auxiliary_storage
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
From ARB_enhanced_layouts:
"[...]when location aliasing, the aliases sharing the location
must have the same underlying numerical type (floating-point or
integer) and the same auxiliary storage and
interpolation qualification.[...]"
Add code to the linker to validate that aliased locations do
have the same interpolation.
Fixes:
KHR-GL45.enhanced_layouts.varying_location_aliasing_with_mixed_interpolation
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
The existing code was checking the whole interface variable rather
than its members, which is not what we want: we want to check
aliasing for each member in the interface variable.
Surprisingly, there are piglit tests that verify this and were
passing due to a bug in the existing code: when we were computing
the last component used by an interface variable we would use
the 'vector' path and multiply by vector_elements, which is 0 for
interface variables. This made the loop that checks for aliasing
be a no-op and not add the interface variable to the list of outputs
so then we would fail to link when we did not see a matching output
for the same input in the next stage. Since the tests expect a
linker error to happen, they would pass, but not for the right
reason.
Unfortunately, the current implementation uses ir_variable instances
to keep track of explicit locations. Since we don't have
ir_variables instances for individual interface members, we need
to have a custom struct with the data we need. This struct has
the ir_variable (which for interface members is the whole
interface variable), plus the data that we need to validate for
each aliased location, for now only the base type, which for
interface members we will take from the appropriate field inside
the interface variable.
Later patches will expand this custom struct so we can also check
other requirements for location aliasing, specifically that
we have matching interpolation and auxiliary storage, that once
again, we will take from the appropriate field members for the
interface variables.
v2:
- Use MAX_VARYING instead of MAX_VARYINGS_INCL_PATCH (Illia)
Fixes:
KHR-GL45.enhanced_layouts.varying_block_automatic_member_locations
Fixes (these were passing before but for incorrect reasons):
tests/spec/arb_enhanced_layouts/linker/block-member-locations/named-block-member-location-overlap.shader_test
tests/spec/arb_enhanced_layouts/linker/block-member-locations/named-block-member-mixed-order-overlap.shader_test
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Move the checks for explicit locations to a separate function. We
will use this in a follow-up patch to validate locations for interface
variables where we need to validate each interface member rather than
the interface variable itself.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
We were assuming that if an input has an invalid explicit location it would
fail to link because it would not find the corresponding output, however,
since we look for the matching output by indexing the explicit_locations
array with the input location, we still need to ensure that we don't index
out of bounds.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
This was duplicated between both drivers, share here.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
There is no reason to block this here, if a driver enables
it, let it handle it.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This probably needs more work but this just add the initial
code to convert gs/tcs/tes nir based shaders in the state tracker.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This commit fixes two issues: First, we were returning false regardless
of whether or not the function made progress. Second, we were calling
nir_metadata_preserve far more often than needed; we only need to call
it once per impl.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
We want this to get called before nir_lower_subgroups which is going in
brw_preprocess_nir. Now that nir_lower_wpos_ytransform can handle
system values, this should be safe to do.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
We currently have a bug where nir_lower_system_values gets called before
nir_lower_var_copies so it will miss any system value uses which come
from a copy_var intrinsic. Moving it to after brw_preprocess_nir fixes
this problem.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable@lists.freedesktop.org
The PRM says "The execution size must be 1." In 73137997e2, the
execution size was set to 1 when it should have been BRW_EXECUTE_1
(which maps to 0). Later, in dc2d3a7f5c, JMPI was used for
line AA on gen6 and earlier and we started manually stomping the
exeution size to BRW_EXECUTE_1 in the generator. This commit fixes the
original bug and makes brw_JMPI just do the right thing.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Fixes: 73137997e2
Returns the brw_type for a given ssa.bit_size, and a reference type.
So if bit_size is 64, and the reference type is BRW_REGISTER_TYPE_F,
it returns BRW_REGISTER_TYPE_DF. The same applies if bit_size is 32
and reference type is BRW_REGISTER_TYPE_HF it returns BRW_REGISTER_TYPE_F
v2 (Jason Ekstrand):
- Use better unreachable() messages
- Add Q types
Signed-off-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
In order to implement the ballot intrinsic, we do a MOV from flag
register to some GRF. If that GRF is used in a SEL, cmod propagation
helpfully changes it into a MOV from the flag register with a cmod.
This is perfectly valid but when lower_simd_width comes along, it simply
splits into two instructions which both have conditional modifiers.
This is a problem since we're reading the flag register. This commit
makes us check whether or not flags_written() overlaps with the flag
values that we are reading via the instruction source and, if we have
any interference, will force us to emit a copy of the source.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
v2: use a more generic compat function
v3: rename and formatting cleanup
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103388
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
CC: <mesa-stable@lists.freedesktop.org>
The beginning of the end for the shader keys. Not entirely sure
what I'm going to replace them with for the compiler though, so this
is the first step.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This helps valgrind when encode_type_to_blob is used.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Rob Clark
Leo Liu
Samuel Pitoiset
Iago Toral Quiroga
Dave Airlie
Jason Ekstrand
Alejandro Piñeiro
Jan Vesely
Marek Olšák
Bas Nieuwenhuizen
Jordan Justen