Now all special FAU handling is unified, which makes both assembler and
disassembler considerably nicer. This adds some more special FAU indices from
page 0 that were previously missing, allowing them to be assembled and
disasembled.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15364>
Like Bifrost, Valhall can access 2x as many fast acess uniforms as previously
thought. However, on Valhall this requires using the pagination mechanism.
Support this in the dis/assembler.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15364>
FAU pages do not need to be specified explicitly in the assembly. Rather, they
should be inferred by the assembler by the instructions used. Rewrite the code
handling this in alignment with new information about the hardware.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15364>
These take up two slots, reading an aligned register pair, even though they are
in a 32-bit instruction. Required to correctly model BLEND.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15364>
This cap is no longer TGSI specific, so let's rename it to reflect
reality.
Because the name got a bit vague when removing the TGSI-bits, let's add
some more details to the name.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15316>
This isn't specific to TGSI, so let's update the name to reflect
reality.
Because the name of the opcode was TGSI specific, let's pick a new one,
based on the naming of the PIPE_CAP_TEXTURE_QUERY_LOD cap.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15316>
This cap is no longer TGSI-specific, so let's update the name to reflect
reality.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15316>
These aren't spiecic to TGSI any more, so let's rename them to reflect
reality.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15316>
These aren't specific to TGSI, so let's rename them to reflect the
reality.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15316>
Similar to the previous commits, these aren't TGSI specific, so let's
drop TGSI from their name.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15316>
This cap is no longer specific to TGSI, so let's rename it and update
the documentation to reflect that.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15316>
This cap no longer has anything to do with TGSI, as the lowering happens
on GLSL IR, and applies just as much to NIR drivers. So let's rename
this cap and update the docs to reflect the current situation.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15316>
anv_batch_bo has a length field that we use to flush cachelines. Not
having that field initialized properly leads us to access out of bound
memory.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15425>
It seems the default D3D behavior and it's complicated to emulate this
in DXVK/vkd3d. Enable it by default to prevent rendering issues in
other games not listed here.
Cc: 22.0 mesa-stable
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15368>
If the LLVM version (even minor) isn't the same on the OS that
precompiles shaders vs the OS that runs them, the cache UUID would
be different, even if only ACO is used.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15406>
For any fence greater than local scope, always set flush type to at
least invalidate so that fence goes on properly.
v2: Fixup condition to trigger workaround (Lionel)
v3: Simplify workaround (Curro)
v4: Don't drop the existing WA (Curro)
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: 22.0 <mesa-stable>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14947>
v2: Use CS_STALL instead of FLUSH_ENABLE in Iris (Lionel)
Add missing CS_STALL after SO_BUFFER change in Anv (Lionel)
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> (v1)
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Cc: 22.0 <mesa-stable>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14947>
Some of the tests marked as flake didn't show up as flakes for a long
time (more than 3 months). So likely they are already fixed.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Acked-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15411>
This reuses the same UBO analysis to do the pushing in the shader
preamble via the ldc.k instruction instead of in the driver via
CP_LOAD_STATE6. The const_data UBO is exempted as it uses a different
codepath that isn't as critical.
Don't do this on gallium because there are some regressions. Aztec Ruins
in particular regresses a bit, and nothing I've benchmarked benefits.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13148>
Since the NIR pass runs very late, it needs to be aware of preambles,
and when creating the instruction we need to move it to the start block
so that RA doesn't overwrite it in the preamble.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13148>
Add in the type, even though it turns out to not be that useful. Add
in support for assembling it. Add some notes based on computerator
experiments. And add support for the indirect a1.x mode that's needed
for storing c64.x and later.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13148>
These will be used to implement the ir3-specific shader preamble
lowering in NIR. shps is conceptually similar to getone (although it
technically can't be duplicated) and shpe is similar to other barriers,
since it has to happen after any stores to the constant file in the
preamble. Add NIR intrinsics and plumbs them through ir3.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13148>
Previously we included the reserved user consts (for Vulkan push
constants) as part of the pushed UBO contents, but that led to a problem
because when calculating the worst-case space for UBOs we didn't factor
in the reserved user consts. We'll have the same problem when doing the
same thing in the preamble optimization pass. Stop including the
reserved size in ubo_state::size, and have ir3_setup_consts() add it in
instead, so we won't forget to add it anywhere.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13148>
This pass tries to move computations that are uniform for the entire
draw to the preamble. There's also an API for backends to insert their
own instructions into the preamble, for porting existing UBO pushing
passes.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13148>
These are functions that run before the entrypoint at least once per
draw and write their results via store_preamble, and then are loaded in
the rest of the shader via load_preamble.
We will add users in the following commits.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13148>
Alyssa Rosenzweig
Tomeu Vizoso
Erik Faye-Lund
Erik Faye-Lund
Jason Ekstrand
Lionel Landwerlin
Samuel Pitoiset
Sagar Ghuge
Anuj Phogat
Juan A. Suarez Romero
Connor Abbott