Reduces CPU load for draw calls that change none or few of the descriptors.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This mask is irrelevant for the generic descriptor set handling, and having it
outside simplifies subsequent changes slightly.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
mainly the fields that can change by reallocating a texture and changing
the tile mode
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
By using a counter to quickly reject textures that are not
bound to a framebuffer, the performance impact when binding
sampler_views/images is not too large.
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The buffer is quite large, but should only be allocated if the
application uses tessellation. Most non-games don't.
v2: - Use the correct register for SI.
- Add define for block size.
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Changes:
- don't flush DB for fast color clears
- don't flush any caches for initial clears
- remove the flag from si_copy_buffer, always assume shader coherency
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
add it to the RW_BUFFERS descriptor array
now the slot masks don't have to have 64 bits
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
v2: - Do check if anything changed earlier
- Use emitted_program instead of emitted_bo to prevent
shaders with shader->bo = NULL confusing the check
- Use radeon_set_sh_reg*
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Instead of having a scratch buffer per program, have one per
context.
Also removed the per kernel wave count calculations, but
that only helped if the total number of waves in the dispatch
was smaller than sctx->scratch_waves.
v2: Fix style issue.
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Also removes PKT3_CONTEXT_CONTROL as that is already being done
by si_begin_new_cs, when emitting init_config.
v2: - Use radeon_set_sh_reg_seq.
- Also set COMPUTE_STATIC_THREAD_MGMT_SE2 / SE3 for CIK+
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Based on work by Marek Olšák.
v2: Add preamble IB.
Leaves the load packet in the space calculation as the
radeon winsys might not be able to support a premable.
The added space calculation may look expensive, but
is converted to a constant with (at least) -O2 and -O3.
v3: - Fix code style.
- Remove needed space for vertex buffer descriptors.
- Fail when the preamble cannot be created.
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
and clamp it right before emitting. This is a prerequisite for computing
the guard band.
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Grigori Goronzy <greg@chown.ath.cx>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This is in preparation of raising the number of exposed sampler views to 32
bits, which will raise the total number of sampler views to 33 for the
polygon stipple texture. That texture should never be compressed (and it's
certainly not a depth texture), but this approach seems cleaner to me than
special-casing the last slot in all affected code paths.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Whether DCC is disabled depends on the access flags with which the image
is bound: image_load supports DCC, but store and atomic don't.
v2: remove an unnecessary masking of images->desc.enabled_mask
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Since it is all about calling into blitter functions, it makes more
sense here. This change also reduces the size of the interfaces between
.c files.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
view->resource is redundant with view->base.texture, so get rid of it.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
This is currently not needed but will be necessary when we have
features that do not work with DCC enabled, such as image stores
and sharing non-scanout surfaces.
v2: Marek: rebase, remove decompression from si_flush_resource (not needed)
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
It only exports the primitive ID.
Also used by TES when it's compiled as VS.
The VS input location of the primitive ID input is v2.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
The texture slot is expanded to 16 dwords containing 2 descriptors.
Those can be:
- Image and fmask, or
- Image and sampler state
By carefully choosing the locations, we can put all three into one slot,
with the fmask and sampler state being mutually exclusive.
This improves shaders in 2 ways:
- 2 user SGPRs are unused, shaders can use them as temporary registers now
- each pair of descriptors is always on the same cache line
v2: cosmetic changes: add back v8i32, don't load a sampler state & fmask
at the same time
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
It was partly a state and partly emulated by shader code, but since we want
to do this in a fragment shader prolog, we need to put it into the shader
key, which will be used to generate the prolog.
This also removes the spi_ps_input states and moves the registers
to the PS state.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
because not using SPI_SHADER_32_ABGR doubles fill rate.
We should also get optimal performance if alpha isn't needed or blending
isn't enabled.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This does change the behavior slightly:
If a shader writes COLOR[i] and that color buffer isn't bound,
the shader will export MRT_NULL instead and discard the IR tree that
calculates the output. The only exception is alpha-to-coverage, which
requires an alpha export.
v2: - update a comment about 16BPC
- account for MRTZ when when fixing alpha-test/kill
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This option allows replacing a single shader by a pre-compiled ELF object
as generated by LLVM's llc, for example. This can be useful for debugging a
deterministically occuring error in shaders (and has in fact helped find
the causes of https://bugs.freedesktop.org/show_bug.cgi?id=93264).
v2: drop the debug flag, use DEBUG_GET_ONCE_OPTION instead
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Expose most of the performance counter groups that are exposed by Catalyst.
Ideally, the driver will work with GPUPerfStudio at some point, but we are not
quite there yet. In any case, this is the reason for grouping multiple
instances of hardware blocks in the way it is implemented.
The counters can also be shown using the Gallium HUD. If one is interested to
see how work is distributed across multiple shader engines, one can set the
environment variable RADEON_PC_SEPARATE_SE=1 to obtain finer-grained performance
counter groups.
Part of the implementation is in radeon because an implementation for
older hardware would largely follow along the same lines, but exposing
a different set of blocks which are programmed slightly differently.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
I discovered that increasing the ESGS ring size fixes GS hangs on Tonga,
so let's do it properly.
There is now a separate init_config_gs_rings state that is not immutable,
because GS rings are resized when needed.
This also saves some memory. Most apps won't need more than 1MB
per ring per shader engine.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
KCACHE, TC L1 and TC L2 are renamed to:
- SMEM L1
- VMEM L1
- GLOBAL L2
You can easily tell what they are used for now.
Shaders must deal with coherency issues between both L1s manually,
e.g. by setting GLC=1 or by using s_dcache_*.
BOTH_ICACHE_KCACHE was an unused definition.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>