The nir_analyze_ubo_ranges pass removes all UBO block 0 loads to reverse
what nir_lower_uniforms_to_ubo() had done, and we only upload UBO pointers
to the HW for UBO block 1-N, so let's just fix up the shader state.
Fixes an off by one in const state layout setup, and some really dodgy
register addressing trying to deal with dynamic UBO indices when the UBO
pointers happen to be at the start of the constbuf.
There's no fixes tag, though this fixes a bug from September, because it
would require the num_ubos fix in nir_lower_uniforms_to_ubo.
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4992>
The hardware issue in the lab preventing jobs from being run on those
machines (and limiting T820 availability), leading to them being
disabled in !4965, has been fixed.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Fixes: 696bafac40 ("CI: Disable Panfrost T7x0 jobs")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5006>
One of the dispatchers in the office (with all the T7x0 boards) has gone
AWOL, and we don't have physical access to restore it. Disable it until
we can get in and fix it.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4965>
robclark found that we needed unique IDs when multiple runners were trying
to report flakes at the same time, but it turns out due to nick limits (16
chars on freenode) we were just getting all the runners appended with
"-142" (or whatever the prefix of the pipelines are these days). And, for
the new flake reporting from baremetal, all the runners ended up being
just "google-freedreno".
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4896>
We were incorrectly taking the merge-request on non-MR pipelines (the
master build after merge) due to a missing '$'. And, for those pipelines,
it would be nice to note whether they're for master or a stable branch.
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4896>
We were failing to tell the allocator about the restriction that scalar
texture instructions (allocated as scalar regs) couldn't be allocated such
that the start of the full unwritemasked vector started before r0. There
was a patch in select_reg_callback on a6xx that tried to work around that,
but you could still end up backed into a corner you shouldn't be because
we didn't tell the RA what it needed.
Fixes compiler assertion failures on a300-a400's blit_z shader, used for
Z32F gmem blits.
Looks like as a result we get tighter register allocation but more nops:
instructions in affected programs: 757945 -> 760356 (0.32%)
nops in affected programs: 317983 -> 320468 (0.78%)
non-nops in affected programs: 27525 -> 27451 (-0.27%)
mov in affected programs: 3098 -> 3023 (-2.42%)
dwords in affected programs: 109664 -> 110656 (0.90%)
last-baryf in affected programs: 112701 -> 112847 (0.13%)
full in affected programs: 4326 -> 4011 (-7.28%)
sstall in affected programs: 120550 -> 120836 (0.24%)
(ss) in affected programs: 13939 -> 13918 (-0.15%)
(sy) in affected programs: 3006 -> 2786 (-7.32%)
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4562>
`wc -l $file` returns the number of lines and the filename.
Fixes: b8c66aeb93 ("ci: Clean up some excessive use of pipes in dEQP results processing.")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4829>
v2:
- Update the default location for the traces when there is no
traces-db entry in the traces definition file (Alexandros).
Fixes: 90a39af5f6 "(ci: Drop the git dependency in tracie)"
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4640>
unreachable was true if the last block is unreachable in the linear cfg,
but it should also be true if it is unreachable in the logical cfg.
Fixes dEQP-VK.graphicsfuzz.for-with-ifs-and-return
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Fixes: 8d8c864beb
('aco: improve check for unreachable loop continue blocks')
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4764>
This lets us get coverage of corner cases of the driver that are tricky to
force a testcase to hit. We don't want to do a full run of the CTS with
each option because that's a lot of runner time, so stack a bunch of
fractional runs in one test job to amortize the test run setup overhead.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4621>
I want to do multiple runs of some bits of the CTS in one test job to test
some driver options, but I want to be able to see the results from any of
them.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4621>
It's easy to get something wrong in the driver build or container or
something that results in falling back to swrast, and then your only clue
was runtime and how your failure cases suspiciously match a swrast
driver's.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4621>
We always want to see status updates happening in the logs, otherwise it
can like maybe your machine hung until the run actually completes.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4621>
We haven't had it enabled due tointermittent failures. Those failures
are, as far as I can tell, due to GPU faults from buffer overflows where a
failing test in a thread stomps an otherwise passing thread's buffers. By
running deqp single-threaded, we can get more consistent failures, at the
cost of needing to do a tiny subset of the tests to keep runtime down.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4685>
Currently only supports PITCAIRN, POLARIS10, VEGA10 and NAVI10
with ACO only, but it's a start.
Unfortunately, we have to duplicate and we will have to try to
keep these lists up-to-date, but it's better than nothing.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4689>
Additionally, purge the winehq-stable package and its dependencies to
avoid crashing when building for s390x.
v2:
- Remove winehq-stable and dependencies for s390x.
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2657
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Daniel Stone <daniels@collabora.com> [v1]
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4678>
This change was missing after acf7e73be5 "(gitlab-ci: make explicit
tracie is gitlab specific)".
Fixes: acf7e73be5 "(gitlab-ci: make explicit tracie is gitlab specific)".
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Rohan Garg <rohan.garg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4638>
Add virglrenderer to the container and use the vtest transport to test
the Gallium driver. On the "host", llvmpipe is used.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4433>
Chocolatey installs depend on downloading binaries from SourceForge,
which is an unreliable host: container builds often fail because it
cannot pick up winflexbison.
Add a loop to retry chocolatey installs if any installs have failed, and
ensure Python is in the accessible PowerShell path rather than relying
on the path being externally refreshed.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4631>
GL spec requires user culling, then clipping then face culling.
llvmpipe was doing clipping then user culling then face culling.
Fix the ordering by adding a new user_cull stage that does the user
culling
Fixes piglit clip_cull-4.shader_test
v2: simplify this a lot (Roland)
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4560>
Tracie main script and traces.yml file talk about repo(sitory) when it
actually means GitLab's project.
Since the script is GitLab's API specific, make it clear.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Rohan Garg <rohan.garg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4496>
Not really needed right now, but seems dangerous to have paths without
the double quote.
I went ahead and used in the rest of values too.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Rohan Garg <rohan.garg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4496>
No need to cache the return value if there is only a single trace
execution call.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Rohan Garg <rohan.garg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4496>
Verify that the Mesa version used when running tracie tests is the
one that was built by CI, rather than any installed distro version.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Rohan Garg <rohan.garg@collabora.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3894>
Without this, the test jobs could spuriously run after the container
job failed or was cancelled, even if the build job didn't run at all.
(I already did this in 94cfe59070, but it
got dropped accidentally in 22d976454f)
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4432>
When running tracie in a docker container, renaming files from
inside the container to a bind-mounted folder on the host causes
a invalid cross-device link due to os.rename limitations.
Switching to shutil allows us to overcome this.
Signed-off-by: Rohan Garg <rohan.garg@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4377>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4377>
Our shared runners are set up for concurrent jobs ~= CPUs / 4 (x86) or 8
(ARM). If you use more build processes than that, then jobs may be
fighting each other for shared system resources, possibly to the point of
failure (we've seen one of the runners OOM on some jobs before, though I'm
not sure if this was the cause).
To try to systematically prevent the problem, we make a ninja wrapper in
the containers that passes the -j flags, and set MAKEFLAGS in the
container builds. This doesn't cover make in non-container builds, but I
believe we don't have any of those.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3782>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3782>
In trying to track down the new failure in #2670, I found that I could get
the flaky test set down to 4 tests, and dropping any remaining test
wouldn't trigger the failure (a bad 8x4 block in the middle of
dEQP-GLES3.functional.fbo.msaa.4_samples.r16f's render target). Disabling
gmem or bypass didn't help, and adding lots of CCU flushing didn't help.
What did help was disabling blitting, or this memset to initialize the
UBWC area after we (presumably) pull a BO out of the BO cache. My guess
is that the 2D blitter can't handle some rare set of state in the flags
buffer and emits some garbage.
I've run 8 gles3 and 7 gles31 runs with this branch now so hopefully I've got the4 right set of flakes marked for removal.
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2670
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4290>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4290>
In preparation for having automated testing with DXGI traces.
v2:
- Updated DXVK version.
- Merged the new Wine container into the existing Vulkan
one (Michel).
v3:
- Updated commit log.
- Use a particular known-good apitrace version (Alexandros).
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4238>
The backports repository can be temporarily inconsistent between
architectures, which can break the docker image build.
Suggested-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4238>
Adds a native build of Mesa using Meson with the Visual Studio 2019
toolchain on a Windows host.
Though Docker is supported on Windows, Docker-in-Docker is not possible,
nor are podman and skopeo available. We handle this by creating the
container from a shell-executor Windows machine, which gives us a native
PowerShell that we can execute Docker from. This attempts to do the same
copy-from-upstream-or-create-if-not-exists optimisation as the
ci-templates do for our Linux builds, albeit open-coded in PowerShell.
The Mesa build itself is executed inside a container, using Meson and
Ninja.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Jose Fonseca <jfonseca@vmware.com>
Acked-by: Brian Paul <brianp@vmware.com>
Acked-by: Eric Engestrom <eric@engestrom.ch>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4304>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4304>
We are currently comparing a hex string representation of the git lfs
OID with a byte array representation of the locally calculated OID,
causing detection of valid cached traces to fail. Ensure we are
comparing compatible representations (in this case hex strings).
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4300>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4300>
The FILES_HOST_URL & FILES_HOST_NAME will be in the Baylibre's runner
environment, move them into the t860/t720/t760 jobs using Collabora's
runner.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4295>
Currently, we store the kernel and ramdisk for each LAVA job in the
artifacts of the job that built them. Because artifacts are stored in
GCE and LAVA labs aren't, this causes a lot of egress with is expensive.
To avoid this, have runners download most of the data via the (cached)
container images once, and for each job upload the kernel and ramdisk to
a server outside GCE.
Right now we only have Collabora's runner with a local web server, so
jobs that go to Baylibre's lab have been disabled.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4295>
There's some files from the .gitlab-ci directory that are needed in the
test stage and that, because the Mesa repository isn't checked out in
that stage, need to be made available through other means.
Because those files are going to be needed in LAVA devices, place them
ino the tarball containing the built files so it's available to both
gitlab-ci runners and LAVA devices.
Before those files were passed in the artifacts of the Gitlab CI job,
but this commit places them into the built tarball so scripts later in
the pipeline don't need to account for this discrepancy.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4295>
After 90a39af5f6 ("ci: Drop the git dependency in tracie"), we have
this error in the radv-polaris10-traces job:
"
...
+ /builds/tanty/mesa/artifacts/tracie/tests/test.sh
tracie_succeeds_if_all_images_match: Fail
Traceback (most recent call last):
File "/tmp/tracie.test.glY0O23HJo/tracie.py", line 6, in <module>
import requests
ModuleNotFoundError: No module named 'requests'
...
"
v2:
- Updated commit log to be more descriptive (Michel).
Fixes: 90a39af5f6 ("ci: Drop the git dependency in tracie")
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4237>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4237>
Fragment shader can write depth and stencil if we set necessary flags
in RSW. In addition to that we need to use special format for Z24S8.
Original format is apparently Z24X8 since we can't sample stencil in GLES2.
This new format also seems to use several components for storing depth
since we saw r != g != b when sampling with this format.
[vasily: - initialize clear->depth to 0xffffff if we reload depth, just
like blob does. Reloading doesn't work otherwise
- use single bitmap for reload type]
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Andreas Baierl <ichgeh@imkreisrum.de>
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4197>
Following on from the db410c conversion to baremetal testing, reuse the
same scripts in the same rack to run 7 db820c boards (#4/8 is failing in
the bootloader for unknown reasons).
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4177>
This should reduce our container rebuild times, particularly on the
40-minute ARM build (which is split across only 2 runners and thus likely
to have a hot cache) when working on updating containers.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4099>
Instead of using git, use python and the Gitlab API
to fetch traces. This helps us slim down our ramdisks
in preparation for integrating trace replay on LAVA
devices.
Signed-off-by: Rohan Garg <rohan.garg@collabora.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4000>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4000>
In preparation for using apitrace to replay traces in LAVA jobs, build a
newer waffle so apitrace can use the surfaceless EGL platform.
As things were before this commit, Xvfb would have been needed in the
LAVA images.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4000>
GP doesn't support ftrunc natively and unfortunately one in generic
opt_algebraic is not GP-friendly either. Introduce our own lowering
that utilizes fsign() that GP supports:
ftrunc(a) = fmul(fsign(a), ffloor(fmax(a, -a)))
Tested-by: Andreas Baierl <ichgeh@imkreisrum.de>
Reviewed-by: Andreas Baierl <ichgeh@imkreisrum.de>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4126>
if $DEQP_PARALLEL is not set, it will use the maximum number of
jobs instead of 1.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4179>
The lava tags was a python array not it's a gitlab CI string,
slit the string with periods in the jinja2 template to avoid having
the following tags :
tags:
- p
- a
- n
- f
- r
- o
- s
- t
instead of :
tags:
- panfrost
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4057>
This supports powering up the device (using an external tool you
provide based on your particular lab), talking over serial to wait for
the fastboot prompt, and then booting a fastboot image on a target
device.
I was previously relying on LAVA for this, but that ran afoul of
corporate policies related to the AGPL. However, LAVA wasn't doing
too much for us, given that gitlab already has a job scheduler and
tagging and runners. We were spending a lot of engineering on making
the two systems match up, when we can just have gitlab do it directly.
Lightly-reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4076>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4076>
The debian firmware package doesn't actually contain it, costing us a
minute of boot time waiting for it to show up.
Lightly-reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4076>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
It was added with tracie, but it doesn't depend on it.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Commit 0406ea4856 ("panfrost: Z24 variants should be sampled as
R32UI") causes a regression when depth textures are sampled.
It's still not clear how MALI_Z32 can work for for Z32 and Z24{S,X}8,
but let's leave that question for later.
Reported-by: Icecream95 <ixn@keemail.me>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4101>
For now tests only use these drivers:
* llvmpipe
* softpipe
* freedreno
* lima
* etnaviv
* panfrost
So using rules:changes gitlab feature to run the tests when the changes
made are potentially affecting these drivers.
A few notes:
* the following code:
.piglit-test:
extends:
- .test-gl
- .llvmpipe-rules
makes gitlab replace .test-gl "rules:changes" values by the one from
".llvmpipe-rules".
* rules:changes always matches for non-MR new branches so jobs will always be
created (and they'll be run if their dependencies are run). For pushes to
existing branches the files changed by the push are used to match the
rules:changes path.
* the same gitlab feature could be used for some build jobs
Acked-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2569>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2569>
RADV_FORCE_FAMILY forces creating a null device that allows RADV
to be instanced without AMDGPU.
The Fossilize database only contains pipelines from the Sascha
Vulkan triangle demos at the moment. I will add more once this
is merged.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3960>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3960>
Fossilize is equivalent to vkpipeline-db but it's definitely more
robust. This is based on the CI traces system.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3960>
The stages and mapping of jobs to them are somewhat arbitrary; the goal
is to avoid having to scroll through large numbers of jobs.
v2: (Pierre-Eric Pelloux-Prayer)
* Use even more stages for test jobs
* Give somewhat meaningful names to stages
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3995>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3995>
Also, adds an example job for radv.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
In preparation to having "vk" (Vulkan) along "gl" (OpenGL/ES).
This is so it is clearer which traces belong to which API and also for
the build jobs.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
In preparation for having automated testing with Vulkan traces.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
In preparation for having automated testing with Vulkan traces.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Since we are at it, replace "cd" with pushd / popd and homogenize how
VK-GL-CTS is built in comparison with other build scripts.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Fix different use cases for transform feedback by setting:
- PIPE_CAP_PACKED_STREAM_OUTPUT=0
- PIPE_CAP_VIEWPORT_TRANSFORM_LOWERED=1
- PIPE_CAP_PSIZ_CLAMPED=1
This is enough for all dEQP xfb-related test cases to run
successfully.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> (Update dEQP expectations)
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2433>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2433>
Now that we have 7 (soon 8) boards available, there's capacity to be
testing GLES 3.0. However, due to (it looks like) buffer overflows in the
driver, we end up with flaky test results: 1/60 jobs spuriously failed,
and another 6/60 jobs reported flakes. At 6 jobs per pipeline, that's way
too high of a failure rate to enable for non-freedreno developers. Leave
the job present but disabled so that we can do manual test runs for
regressions.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3661>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3661>
This should get us better stability of the db410c boards by having a
smaller per-board software stack, with no disks involved (just initramfs).
Additionally, the new cluster is 7 (soon 8) db410cs, while currently the
docker cluster only has 1/4 of its db410cs still running.
Unfortunately, we have to prepare the fastboot boot image during the ARM
drivers build stage, because LAVA relies on publicly available URLs for
the images to load into the bootloaders of the boards, and the only thing
we have for that is gitlab's artifacts.
Note that this testing relies on the boards being freshly flashed with the
linaro v136 firmware to pick up the initramfs size fixes and to stop the
boot at fastboot.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3661>
I'm working on moving the db410c CI from docker to LAVA, which means we
get to boot a custom kernel. To do that, we need to enable ARCH_QCOM in
the kernel, save the dtb around, and include abootimg in our container so
that we can generate combined kernel/dtb/ramdisk images for fastboot.
LAVA's fastboot support is unable to pack the overlay into an abootimg
image, just a cpio rootfs. We could flash the cpio rootfs after overlay
addition, but that takes 2 minutes to do, and causes wear on the devices.
Instead, we'll bring up the network at boot and use wget to fetch the
overlay. We'll want network support anyway, so that we can transfer the
failure xmls back to the gitlab job's artifacts at some point.
Since the msm GPU and realtek network firmware increase our payload by
3MB, add in firmware compression so that it doesn't waste as much RAM on
devices not using it.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3928>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3928>
No sense building some of these subsystems for just testing the GPU.
Saves some container rebuild time and kernel contents to move around.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3928>
The LLVM libraries were a significant fraction of the entire payload
(55M/250M uncompressed) into the initramfs of the test boards, but
LLVM is only used for the draw module used in select/feedback (which
isn't even tested in CI on ARM yet).
Assume that llvmpipe draw is safe enough for ARM given the coverage on
x86, and disable LLVM for these jobs.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3928>
We can drop now the GLES version overrides now that we have a DEBUG flag
that enables all what is expected from a GLES 3.0 implementation.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3950>
We are able to run only 1/5th of the tests in around the same time that
dEQP-GLES2 takes, so do that for now while more DUTs are installed.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3876>
We disabled presentation a while back because it's so expensive for gitlab
to parse it on the other side. We may have a use for it some day if
gitlab gets better, but for now let's not spend the time processing it.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3883>
When bringing up a new board or starting a new GLES version, we have a lot
of unexpected fails to document, so we need the full list in the log (not
just deqp-runner.sh's head -n 50) so we can populate the xfail list.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3883>
LAVA finds a '#' early in boot and races to emit its shell commands.
Apparently for the current boards those serial commands end up getting
buffered such that things work out, but for db410c and db820c, the buffer
is lost and LAVA gets stuck waiting for the prompt. By setting a prompt,
we can delay our commands until we're actually supposed to emit them (and
suppress a complaint from the lava dispatcher that we're using a risky
prompt!)
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3883>
Introduce automated testing of Mesa by replaying traces with Renderdoc
or Apitrace.
For now only LLVMPipe is tested, but other drivers can be tested if
there's runners with the necessary hardware.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2935>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2935>
Some dEQP tests have started passing and it's taking a while to update
the expectations and skips list.
Disable for now so CI doesn't fail and stuff can be merged.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2935>
clear info is needed when submit flush and may be changed after
framebuffer switch, so we need to move it into submit.
This also fixes 5 dEQP tests as a side effect: clear info is per
submit so clear value when one submit won't affect next submit.
v2:
remove fixed dEQP test from CI list.
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3755>
On a daily basis I've been having to restart people's a630 jobs in the
front couple of pages of /merge_requests due to spurious failures from our
flaky tests, and fielding reports of spurious fails from other developers,
and babysitting my own marge merges that are failing due to our flakes.
Nobody should have to deal with that, especially not non-freedreno
developers, so just scrape the list of flakes reported to #freedreno-ci
for the last month and ban those tests that have failed more than once
until we have a credible fix.
Acked-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3662>
Using LLVM 8 for ppc64el and 7 for s390x (which hits some coroutine
related issues with LLVM 8).
There are some test failures we need to ignore for now. Also, the
timeout needs to be bumped from the default 30s for some tests, because
they can take longer under emulation.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3643>
The motivation for this is that we want to make use of the meson cross
files in this script, which have the ccache compiler paths.
We need to remove the ccache directory at the end, it would just waste
space in the image for no benefit.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3643>
The ssa doesn't need to be manually added to block->comp->reg_list.
Doing so actually causes other registers to be marked as undef=true
later.
This patch alone fixes a few deqp tests that have undefs.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3502>
nir can output writes to dead registers when expanding vec4 operations
to non-ssa registers. In that case, some components of the vec4 may be
assigned but never read. These are also not currently removed by a nir
dead code elimination pass as they are not ssa.
In order to prevent regalloc from allocating a live register for this
operation, an interference must be assigned to it during liveness
analysis.
This workaround may be removed in the future if the assignments to dead
components can be removed earlier in ppir or nir.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3502>
This is not always ->rgbBits, because there are cases where that could
be 32 but we're (legally) bound to a depth-24 pixmap. The important
thing to have match here is the actual server-side notion of depth. You
can look this up (at modest expense) from the xlib visual info if the
fbconfig has a visual. But it might not, so if not, fetch it (at
slightly greater expense) from XGetGeometry. Do this at GLX drawable
creation so you don't have to do it on the SwapBuffers path.
Apparently this fixes glx/glx-swap-singlebuffer, which is unintentional
but quite pleasant.
Fixes: mesa/mesa#2291
Fixes: 90d58286 ("drisw: Fix and simplify drawable setup")
Reviewed-by: Eric Anholt <eric@anholt.net>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3305>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3305>
Amend fails and skips lists basing on lists from Andreas Baierl,
shard mali400 job across two devices since it takes close to 10min
and rename jobs to lima-mali400-test and lima-mali450-test.
Also don't set MESA_GLES_VERSION_OVERRIDE=3.0 for lima since we don't support
GLES 3.0 and lower DEQP_PARALLEL to 3 for jobs on H3.
Keep mali400 jobs disabled atm since they take too much time to complete
and we also get some unexplicable failures in dEQP-GLES2.functional.default_vertex_attrib.*
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3163>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3163>
deqp-runner.sh uses it to determine whether we split job across multiple
devices and if we do what's the node index.
With this change we now can set 'parallel: N' in job description if we want
to split the job.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3163>
Use the normal build job to also prepare the artifacts for LAVA jobs.
For that, the build container needs to also build the test suites,
kernel, ramdisk, etc.
Then the build job will place the just-built Mesa in the ramdisk and the
test job can generate a LAVA job and point to those artifacts.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3295>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3295>
They're not available for Debian buster yet, so we have to use upstream
snapshot packages again.
In contrast to earlier, we now store the LLVM APT repository key in Git
instead of re-downloading it every time.
Take one step towards sharing code between the LAVA and non-LAVA jobs,
with the goals of reducing maintenance burden and use of computational
resources.
The env var DEQP_NO_SAVE_RESULTS allows us to skip the procesing of the
XML result files, which can take a long time and is not useful in the
LAVA case as we are not uploading artifacts anywhere at the moment.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
I'm honestly unsure what this is for, but it's needed on MFBD systems
for unknown reasons, at least when MRT is actually in use and then
sometimes without MRT (it fixes a blend shader issue on T760?)
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Visoso <tomeu.vizoso@collabora.com>
I feel really bad about this but this one test is flaking. I don't want
to do a mass revert (and bisection is extremely difficult with
nondeterministic/Heisenbugs), but it's Friday night and master needs to
pass. This commit should be reverted asap (once the flake is solved)
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
We'll need this so we can allocate a stack for the batch large enough
for all the jobs within it.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Only Polaris10 is tested at the moment, and I disabled a TON of
tests to keep a CTS run within 5 minutes because my local runner
is a bit slow. A full CTS run takes more than 1h, which means it
will hit the timeout.
RADV CI can only be triggered manually on personal branches to
avoid breaking the world because one runner is definitely not
enough. This will allow us to test it until it's stable enough
to be enabled by default.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
This requires to bump LLVM to 8 because it's the minimum supported
version by RADV.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Having different policies could have some weird results, e.g. changes
only touching documentation (where the intention is not to run the
pipeline by default) would still create a pipeline with the LAVA jobs
running by default.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
Eric Anholt
Daniel Stone
Dave Airlie
Alyssa Rosenzweig
Samuel Pitoiset
Michel Dänzer
Andres Gomez
Lionel Landwerlin
Rhys Perry
Christian Gmeiner
Tomeu Vizoso
Alexandros Frantzis
Rohan Garg
Andres Gomez
Neil Armstrong
Icenowy Zheng
Vasily Khoruzhick
Boris Brezillon
Pierre-Eric Pelloux-Prayer
Louis-Francis Ratté-Boulianne
Andreas Baierl
Ilia Mirkin
Roland Scheidegger
Qiang Yu
Kristian H. Kristensen
Erico Nunes
Adam Jackson
Matt Turner
Rob Clark