Overall it does not really help or hurt. The deferred demo gets 1%
improvement and some games a 3% decrease, so I don't think this
should be enabled by default.
But with the code upstream it is easier to experiment with it.
v2: Remove initializing the registers from si_emit_config.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Apps can use this for render feedback loops, where things are
defined if they render each pixel only once. However, DCC fails
here, as the level of coherence is a block not a pixel, so disable it.
This is also going to help implementing other stuff.
Even if we optimize this later to only happen if there actually is
a loop (if possible at all ...), then the machinery is still useful
to exclude images accessible by the SDMA queue when that is implemented.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
For fast clear eliminate and decompressions, we always use the most compressed
format.
For clears, the code already creates a renderpass on demand with the exact same
layout as specified.
Otherwise we start distinguishing between GENERAL and TRANSFER_DST_OPTIMAL.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
We do an in place copy where we read compressed and write decompressed.
By doing this in sizes that cover entire DCC blocks and waiting for all
reads in the block before starting to write we avoid corruption.
In the end we clear the DCC metadata to 0xffffffff.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
This fixes some of the broken:
dEQP-VK.synchronization.op.multi_queue.*64x64x8* tests.
Fixes: e38685cc62 'Revert "radv: disable support for VEGA for now."'
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This fixes some of the broken:
dEQP-VK.synchronization.op.multi_queue.*64x64x8* tests.
Fixes: e38685cc62 'Revert "radv: disable support for VEGA for now."'
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This fixes some of the broken:
dEQP-VK.synchronization.op.multi_queue.*64x64x8* tests.
Fixes: e38685cc62 'Revert "radv: disable support for VEGA for now."'
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This fixes the layout issue for the blit path as well.
This fixes:
dEQP-VK.api.copy_and_blit.core.blit_image.all_formats.depth_stencil.d32_sfloat_s8_uint_d32_sfloat_s8_uint*
v2: use compatible render passes.
v2.1: use enum
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2 17.3" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
If we are doing a general->general transfer with HIZ enabled,
we want to hit the tile surface disable bits in radv_emit_fb_ds_state,
however we never get the current layout to know we are in general
and meta hardcoded the transfer layout which is always tile enabled.
This fixes:
dEQP-VK.api.copy_and_blit.core.image_to_image.all_formats.depth_stencil.d32_sfloat_s8_uint_d32_sfloat_s8_uint.optimal_general
dEQP-VK.api.copy_and_blit.core.image_to_image.all_formats.depth_stencil.d32_sfloat_s8_uint_d32_sfloat_s8_uint.general_general
v2: refactor some shared helpers for blit patches
v3: we only need multiple render passes as they should be compatible.
v3.1: use enum (Bas)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2 17.3" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This add support for a 3D image reading path to the blit 2d paths,
like I did for the clear paths.
Fixes: e38685cc62 'Revert "radv: disable support for VEGA for now."'
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Alex Smith <asmith@feralinteractive.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
On GFX9 we must access 3D textures with 3D samplers AFAICS.
This fixes:
dEQP-VK.api.image_clearing.core.clear_color_image.3d.single_layer
on GFX9 for me.
v1.1: fix tex->sampler_dim to dim
v2: send layer in from outside
v3: don't regress on pre-gfx9
Fixes: e38685cc62 'Revert "radv: disable support for VEGA for now."'
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Alex Smith <asmith@feralinteractive.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
They are dummy objects but the spec requires layout to not be
NULL, this just makes sure we are creating valid pipeline layout
objects. This will allow us to remove some useless checks.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
dota2 binds a ton of index buffers but the type is always 16-bit.
Note that we have to invalidate the type when switching from
indexed draws to normal draws.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
RADV_CMD_BUFFER_STATUS_INVALID is not used for now, but I think
it makes sense to declare it. Could be used later with better
command buffer error handling.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Allows apps to determine the LLVM version so that they can decide
whether or not to enable workarounds for LLVM issues.
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Cc: "17.2 17.3" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Just check if image has scanout flag set
v2 (Jason Ekstrand):
- Rebase
- Also drop the now unused radv_mem_flag_bits enum
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
This allows to update them with only one memcpy().
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
I don't think we will need a 64-bit unsigned integer for the
dirty flags in the future, and there is still 20 bits left.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
VkDeviceQueueCreateInfo::queueFamilyIndex is an unsigned 32-bit
integer.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Just after the vertex shader.
This seems to give a minor boost for, at least, Serious Sam
Fusion 2017 and Dawn of War 3. I don't see any real impacts
with The Talos Principle.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This moves some calculations of register values into the pipeline
construction, it saves looking at outinfo in the cmd buffer emit.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
There's no point recalculating these the whole time on descriptor
emission, just store them at pipeline creation.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Instead of storing all the pointers and zeroing them all out,
just store a valid bitmask in the state. This also moves
the CmdBindPipeline path down the cpu usage path for the
multithreading demo as it no longer has to traverse MAX_SETS
to find the active descriptor sets.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This isn't required to be cleared, since buffers are only linked
by vertex elements, so if elements are clear then no buffers
should be referenced.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just removes a hole in the cmd_state and packs some bools
together.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The vram_list linked list resulted in lots of pointer chasing.
Replacing this with an array instead improves descriptor set
allocation CPU usage by 3x at least (when also considering the free),
because it had to iterate through 300-400 sets on average.
Not a huge improvement as the pre-improvement CPU usage was only
about 2.3% in the busiest thread.
Reviewed-by: Dave Airlie <airlied@redhat.com>
It confuses CTS. This pregenerates the heap info into the
physical device, so we can use it for translating contiguous
indices into our "standard" ones.
This also makes the WSI a bit smarter in case the first preferred
heap does not exist.
Reviewed-by: Dave Airlie <airlied@redhat.com>
CC: <mesa-stable@lists.freedesktop.org>
This should make sure we don't treat exports buffers as local
bos.
Fixes: a639d40f13 (radv: add support for local bos. (v3))
Tested-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This allows an app to query shader statistics and get a disassembly of
a shader. RenderDoc git has support for it, so this allows you to view
shader disassembly from a capture.
When this extension is enabled on a device (or when tracing), we now
disable pipeline caching, since we don't get the shader debug info when
we retrieve cached shaders.
v2: Improvements to resource usage reporting
v3: Disassembly string must be null terminated (string_buffer's length
does not include the terminator)
v4: Fixed LDS reporting. (Bas)
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Only needed when the CS path is used.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
radeonsi only emits these when dfsm is enabled, so for now
just hinge them on a flag we never set.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This allows us to pass extra parameters to the memory allocation
operation that are not defined in the vulkan spec. This is useful for
internal usage.
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This extension allows the caller to change a queue's system wide
priority. This is useful for applications with specific
latency constraints.
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
To be consistent with the emit function name.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This will be used to create a hash of the combined shaders in the
pipeline.
Signed-off-by: Timothy Arceri <tarceri@itsqueeze.com>
Acked-by: Dave Airlie <airlied@redhat.com>
So one of the CTS tests tries to allocate a 16384x1 2048 array
texture. This overflows a bunch of calculations when we want it
tiled as the heights goes to 128.
addrlib returns us the correct size (16GB or so), but we mangle
it in the htile calcs due to the 32-bit offset fields, then
userspace gives us the reduced number and we try to allocate
it on a heap and things blow up.
We really need to give the app back the correct size for the
image so we can blow up properly in memory allocation later.
This should fix hangs in
dEQP-VK.pipeline.render_to_image.core.1d_array.huge.width_layers.r8g8b8a8_unorm_d32_sfloat_s8_uint
since
Fixes: ad3d98da9f (radv: enable tc compatible htile for d32s8 also.)
Now there's an open question if we should be enabling tc-compat
htile at all for shallow textures like the above.
This might cause some other wierd side effects in CTS even
without the tc compat so:
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This ports radv to using the anv entrypoint/extension generator
code.
No differences on enabled extensions list in vulkaninfo.
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
We want to generate different variants for sisched and unsafe_math
shader variants, so add them to the hash key.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This will allow us to emit the CLEAR_STATE packet instead
of a bunch of useless packets when doing CS initialization.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This is the drivers on-disk cache intended to be used as a
fallback as opposed to the pipeline cache provided by apps.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The situations where we enable it are quite limitied, but it works,
even for madmax, so lets just enable it.
Reviewed-by: Dave Airlie <airlied@redhat.com>
To be consistent with other meta operations.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This is needed since we don't update the number of viewports/scissors
when they are set dynamically (according to the spec). In the following
scenario:
* vkCmdSetViewport()
* vkCmdClearColorImage() (or any other meta operations)
The viewports/scissors weren't saved correctly because no pipeline
was bound before, and thus the number of viewports/scissors were 0.
This fixes a regression with:
dEQP-VK.draw.negative_viewport_height.front_ccw_cull_back
Fixes: 60878dd00c ("radv: do not update the number of viewports in vkCmdSetViewport()")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
I tested this 10 times with
./deqp-vk --deqp-case=dEQP-VK.texture.filtering.3d.formats.r4g4b4a4*
and one full run of CTS, seems the issue is gone.
Also reduces CTS runtime by 30% or so.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Useful to know which debug/perftest options were enabled when
a hang report is generated.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This just reduces the calculations a bit further.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This moves a bunch of non-draw dependent calcs into the pipeline code,
to reduce CPU overheads in the draw path.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reduce size of radv_pipeline.c and improve code isolation. More
code can probably moved but it's a start.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
In my opinion, this improves code readability.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Useless to track which one has been updated because we
re-upload all the vertex buffers in one shot.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
It's fairly simple for now, but this might be quite useful.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
At the moment, debugging radv is not really easy because the
driver doesn't report enough information when it hangs. This
new file will be the main location for all debug tools.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This will allow to propagate VK_ERROR_OUT_OF_HOST_MEMORY to
vkEndCommandBuffer() when necessary.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Avoid passing the vulkan image creation into the image view descriptor
setup. This cleans up the usage of range inside the init, instead
using the properly inited values in the image view.
This is just a cleanup but some future vega changes will depend on it.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
GFX9 needs the SX MRT blend registers programmed, port over
the code from radeonsi to workout the values from the blend
state, and program the registers on rbplus systems.
This fixes lots of:
dEQP-VK.pipeline.blend.*
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Need to take the sample count into account in the depth decompress and
resummarize pipelines and render pass.
Fixes: f4e499ec79 ("radv: add initial non-conformant radv vulkan driver")
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
This mirrors what Marek has done for radeonsi, and uses
a separate counter to handle the fmask surface for MSAA
MRTs.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
It justs works with the fragment shader resolve, so no need to do
a custom conversion. In fact with SRGB dest, it actually gives
wrong results.
Fixes: 69136f4e63 "radv/meta: add resolve pass using fragment/vertex shaders"
Reviewed-by: Dave Airlie <airlied@redhat.com>
These need to match for interop compatibility queries.
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This reduces the number of BOs that we need for the BO lists during
a submission.
Currently uses a fairly simple linear search for finding free space,
that could eventually be improved to a binary tree, which with some
per-node info could make a check for space O(1) and finding it O(log n),
in the number of buffers in that slab.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This fixes:
dEQP-VK.api.copy_and_blit.core.blit_image.all_formats.*
for a2r10g10b10 formats as destination on SI/CIK hardware.
This adds support to the meta program for emitting 10-bit
outputs, and adds 10-bit support to the fragment shader key.
It also only does the int8/10 on SI/CIK.
Fixes: f4e499ec7 (radv: add initial non-conformant radv vulkan driver)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
We have a few UUIDs, so lets be more specific.
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This adds support for sharing semaphores using kernel syncobjects.
Syncobj backed semaphores are used for any semaphore which is
created with external flags, and when a semaphore is imported,
otherwise we use the current non-kernel semaphores.
Temporary imports from syncobj fd are also available, these
just override the current user until the next wait, when the
temp syncobj is dropped.
v2: allocate more chunks upfront, fix off by one after
previous refactor of syncobj setup, remove unnecessary null
check.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
When using DCC some clear values don't require a cmask eliminate
step. This patch adds support for black and black with alpha 1,
there are other values, but I don't have access to a comprehensive list.
This works by setting the cmask eliminate predicate when doing the
fast clear, and later when doing the cmask elimination making sure
the draws are predicated.
This increases the fps on Sascha Willems deferred.
Tonga: 580fps->670fps on a Tonga PRO card.
Polaris 730->850fps
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This patch uses addrlib to workout the tile swizzles according
to the surface index. It seems to produce the same values as
amdgpu-pro for the deferred test.
v2: don't apply swizzle to CMASK. the eg docs don't mention
it, and we clearly don't align cmask for that.
v3: disable surf index for dedicated images, as these will
most likely be shared, and I don't think the metadata has
space for this info in it yet.
v4: update for shareable images, rename combined_swizzle
to tile_swizzle
This gets the deferred demo from 730->950fps on my rx480.
(dcc cmask elim predication patches get it further)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This effectively reverts commit 43a171878bb4b5aedb36a. Technically,
VK_KHR_get_memory_requirements2 and VK_KHR_dedicated_allocation are
required for the KHR version but this at least restores the removed
functionality. This patch builds but has received zero testing.
Acked-by: Dave Airlie <airlied@redhat.com>
If a cube image has VK_IMAGE_USAGE_STORAGE_BIT set, the type in an image
view's descriptor was set to a 2D array (and a few other fields adjusted
accordingly). This is correct when the image view is actually bound as a
storage image, but not when bound as a sampled image. In that case the
type should be set as a cube.
Fix by generating 2 sets of descriptors at view creation time for both
storage and non-storage usage, and then choose between them based on
descriptor type when writing descriptor sets.
v2: Generate storage descriptors for images with TRANSFER_DST, since
those may be used as storage images internally.
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This doesn't get used yet, it just adds support to various PKT3
emissions to enable it later.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
We have some features that seem to slow things down or cause other
possible undesireable side effects, but it would be nice to test
games etc with them easily.
I forsee multisample DCC and maybe some shader opt changes using this.
For now use it for batch chaining.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just moves lots of stuff to the bind stage rather than
dealing with it in the draw stage.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
There is no need to calculate this at draw time.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
I want to use these in the pipeline setup stage.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
We have Vulkan utilities in both src/util and src/vulkan/util. The
latter seems a more appropriate place for Vulkan-specific things, so
move them there.
v2: Android build system changes (from Tapani Pälli)
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
This adds some rb+ support, as on GFX9 we have to disable
it as per radeonsi.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
GFX9 needs to write event EOP to a fence buffer, allocate some
space for this, and just write an ever increasing number to it,
this isn't exactly what radeonsi does, but it seems to work.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is mostly mechanical changes of renaming types and introducing
"legacy" everywhere.
It doesn't use the ac_surface computation functions yet.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Like radeonsi. This saves memory, and the information can easily be
recomputed on the fly where necessary.
Reviewed-by: Dave Airlie <airlied@redhat.com>
For GFX9 these will be needed to be 64-bit, so bump them early,
to avoid it causing any wierdness later.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
In prep for GFX9 refactor some of the eop event writing code
out.
This changes behaviour, but aligns with what radeonsi does,
it does double emits on CIK/VI, whereas previously it only
did this on CIK.
v2: bump the size checks.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This code was in a few places, consolidate into one.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
And correct implementation to specify only what we support.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Bas pointed out the fs key doesn't take srgb into account,
since there is just one srgb variant, just create a separate
pipeline for it. This also uses dest format to be more consistent
on when srgb matters.
Fixes: 69136f4e63 "radv/meta: add resolve pass using fragment/vertex shaders"
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The color clear value is uniform and needs only to be emitted from
the frag shader, so just push it down via a push constant,
and remove the vertex buffer completely.
The depth clear value needs to be emitted from the vertex
shader, but is only a single value.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This drops the resolve workarounds that change an image
tiling mode behinds it's back, this is horrible and breaks
the image_view->image relationship. Remove all this.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
In order to resolve into DCC enabled dests we need to use
the fragment shader. This reuses the code from the compute
path and implements a resolve path in vertex/fragment shader.
This code isn't used until later.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds a path to allow compute resolves to be used
for subpass resolves.
This isn't used yet, but will be later.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
If we are resolving into an srgb dest, we need to convert
to linear so the store does the conversion back.
This should fix some wierdness seen when we subresolves
hit the compute path.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This still doesn't give us complete pWaitDstStageMask support,
but it should provide enough to be correct if not as efficent as
possible.
If we have wait semaphores we must flush between submits and
flush the shaders as well.
This fixes the remaining fails in:
dEQP-VK.synchronization.op.single_queue.semaphore.*ssbo*
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is to rework the surface code like radeonsi.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just makes it easier to do the follow in cleanups of the surface.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Gives me approximately a 2% perf increase in bot dota2 & talos.
Having descriptors (both sets and vertex buffers) prefetched
didn't help so I didn't include that.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
v2: Handle out of pool memory error.
v3: Actually use VK_ERROR_OUT_OF_POOL_MEMORY_KHR for the error condition.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Bas Nieuwenhuizen <basni@google.com>
We want to expose more descriptor sets to the applications,
but currently we have a 1:1 mapping between shader descriptor
sets and 2 user sgprs, limiting us to 4 per stage. This commit
check if we don't have enough user sgprs for the number of
bound sets for this shader, we can ask for them to be indirected.
Two sgprs are then used to point to a buffer or 64-bit pointers
to the number of allocated descriptor sets. All shaders point
to the same buffer.
We can use some user sgprs to inline one or two descriptor sets
in future, but until we have a workload that needs this I don't
think we should spend too much time on it.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This allows meta to use push descriptors without disturbing user
push descriptors.
radv_meta_push_descriptor_set differs from vkCmdPushDescriptorSetKHR
in that partial updates are not supported; all descriptors used in
subsequent draw commands must be pushed at the same time.
Signed-off-by: Fredrik Höglund <fredrik@kde.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
According to the Vulkan spec, VkPipelineInputAssemblyStateCreateInfo's
primitiveRestartEnable flag should only apply to indexed draws, however
it was being enabled regardless of the type of draw. This could cause
problems for non-indexed draws with >=65535 vertices if the previous
indexed draw used 16-bit indices.
Fixes corruption of the credits text in Mad Max.
v2: Reset primitive restart state after executing a secondary command
buffer.
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Makes more sense when we hash the layout for the pipeline cache.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
The devil is in the shader again, otherwise this is
fairly straightforward.
The CTS contains no pipeline statistics copy to buffer
testcases, so I did a basic smoketest.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
For using them with both occlusion and pipeline statistics queries.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Adds a shader for writing occlusion query results to a buffer, as the
CP packet isn't support on SI or secondary buffers, and doesn't handle
the availability bit (or partial results) nor truncation to 32-bit.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
All offsets and strides are precomputed by
radv_CreateDescriptorUpdateTemplateKHR and stored in the template.
v2: Move the new struct declarations from radv_descriptor_set.h
to radv_private.h (Bas)
Signed-off-by: Fredrik Höglund <fredrik@kde.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Move the implementation into a separate function that takes a
cmd_buffer and a dstSetOverride parameter.
When cmd_buffer is not NULL, radv_update_descriptor_sets calls
cs_add_buffer directly instead of updating the buffer list.
This will be used to implement VK_KHR_push_descriptor.
Signed-off-by: Fredrik Höglund <fredrik@kde.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The current code was broken, and I decided to redesign it instead.
This puts the sample positions for all samples into the queue
constant descriptor buffer after all the spill/ring descriptors.
It then uses a single offset register to point how far into the
samples the samples for num_samples are. This saves one user sgpr
and means we only generate the sample position data in the rare
single case where we need it currently.
This doesn't fix the failing CTS tests without the followup
fix.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This calculates the pipeline state for tessellation.
It moves the gs ring calculation down to below
where the tessellation shaders will be compiled,
as it needs the info from those shaders.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This patch adds support for the offchip rings for storing
tessellation factors and attribute data.
It includes the register setup for the TF ring
v2: always do tess ring size calcs (Bas)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Vulkan Clipping is defined in terms of vertices, the scissor based
clipping happens on pixels. There is a difference with points and
lines, as a vertex can be outside the viewport while some pixels are in.
On Vulkan thoise pixels shouldn't be drawn, while they would be with
the guardband.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
With tess this becomes a bit more complex. so move to pipeline
for now.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This also takes the side band setting code from radeonsi.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
There is no need to calculate this on each command submit.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
There is no need to recalculate this every time.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The logic was different than radeonsi, fix it up before adding
tess support.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This reverts commit 2845a108a9.
This break VK-GL-CTS randomly.
./deqp-vk --deqp-case=dEQP-VK.texture.filtering.3d.formats.r4g4b4a4*
bounces around here from 6/6 to 3/6 or 4/6 to hanging.
Signed-off-by: Dave Airlie <airlied@redhat.com>
A buffer descriptor is 16 bytes, not 16 dwords.
Signed-off-by: Fredrik Höglund <fredrik@kde.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Use the same helpers as for other handle<->pointer conversions.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
So that we don't keep allocating BOs for the IBs and upload buffers.
We run some risk of memory increase with e.g. a bimodal size
distribution of command buffers, but I haven't noticed a significant
increase with dota2 and talos.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This adds initial support for NV_dedicated_allocation, then
uses it for the wsi image/memory allocation paths internally
in the driver.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Used only within the generated source file.
Fixes: 12301c5418 ("radv: drop the RADV_CALL macro.")
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Eduardo Lima Mitev <elima@igalia.com>
Fixes: 12301c5418 ("radv: drop the RADV_CALL macro.")
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Eduardo Lima Mitev <elima@igalia.com>
This adds support to radv_GetPhysicalDeviceXlibPresentationSupportKHR
and radv_GetPhysicalDeviceXcbPresentationSupportKHR to check if the
local device file descriptor is compatible with the descriptor
retrieved from the X server via DRI3.
This will stop radv binding to an X server until we have prime
support in place. Hopefully apps use this API before trying
to render things.
v2: drop unneeded function, don't leak memory. (jekstrand)
v3: also check in surface_get_support callback.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just keeps popping up minor problems and regressions we should
revisit in a more sustainable manner later.
This also reverts:
Revert "radv: query cmds should mark a cmd buffer as having draws."
Revert "radv: also fixup event emission to not get culled."
This reverts commit d1640e7932.
This reverts commit 8b47b97215.
This reverts commit b4b19afebe.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This one only keeps allocated memory in the list, and list nodes
in the descriptor sets. Thsi doesn't need messing around with
max_sets, and we get automatic merging of free regions.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
We only use the freed ones after all free space has been used. If
the app only allocates small descriptor sets, we might go over
max_sets before the memory is full.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
CC: <mesa-stable@lists.freedesktop.org>
Fixes: f4e499ec79
This ports the remains of the workarounds from radeonsi for
the non-TESS cases. It should provide equivalent workarounds
for hawaii and bonarie.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This puts the common gfx state for the device into an
indirect buffer, and just calls out to it, on CIK and above.
This is taken from what radeonsi does.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
If a buffer is just full of flushes we flush things on command
buffer submission, so don't bother submitting these.
This will reduce some CPU overhead on dota2, which submits a fair
few command streams that don't end up drawing anything.
v2: reorganise loop to count first then malloc,
rename some vars (Bas)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Works for me on dota2 and talos now.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Andres Rodriguez <andresx7@gmail.com>
The CTS tests at least are using this, and we were totally
ignoring it.
This hopefully fixes the bouncing multisample CTS tests.
v2: get family mask in ignored case from command buffer.
v3: only change things in one place, use logic from Bas.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This uses the scratch infrastructure to handle the esgs
and gsvs rings.
(this replaces the old code that did this with patching).
v2: fix correct ring sizes, reset sizes (Bas)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Samuel Pitoiset
Bas Nieuwenhuizen
Dave Airlie
Alex Smith
Andres Rodriguez
Timothy Arceri
Jason Ekstrand
Nicolai Hähnle
Fredrik Höglund
Grazvydas Ignotas
Emil Velikov