This commit fixes the following flaws in the implementation:
* when a resource was re-allocated, the guest side storage
was also allocated
* when a source needs a readback before being written to, then
the call would go through vws->transfer_get, thereby bypassing the
staging resource, and this would fail on the host, because no
the allocated IOV was too small (just one byte)
* if the texture write would need neither flush nor readback, the
old code path would be used expecting that guest side backing stogage
for the texture.
v2: - actually do a readback to the stageing resource when it is required
- fix typo (Lepton)
v3: Don't use stageing transfers if the host can't read back the data
by rendering to an FBO or calling getTexImage, because in this case
we rely on the IOV to hold the date.
v4: Also don't use staging transfers if the format is no readback
format. Otherwise we have to deal with the resolve blit, and
this is currently not working correctly.
v5: add a new flag that indicates whether non-renderable textures can
be read back (either via glGetTexImage or GBM)
v6: Restrict the use of staging texture transfers to textures that can
be read back, and on GLES also if the they are bound to scanout and
the host uses minigbm to allocate such textures.
For that replace the flag indicating the capability to read back
non-renderable textures with a cap that indicates whether scanout
textures can be read back.
v7: update virglrenderer version in the CI
v8: update use of stageing (Chia-I)
v9: remove superflous check and assignment (Chia-I)
v10: disable stageing textures for arrays with stencil format. This is a
workaround for failures of the CI.
Fixes: cdc480585c
virgl/drm: New optimization for uploading textures
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14495>
Run crosvm as a background process in order to allow intercepting
interrupt signals (INT, TERM) and properly release/cleanup any allocated
resources.
This is particularly helpful when one or more crosvm tasks hang, which
will eventually prevent subsequent instances to be started - currently
we can handle up to 128 concurrent crosvm instances per runner.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15238>
Ensure we can handle up to 128 concurrent crosvm instances per runner
with the current CID generator. This is a safety margin for the new
64-core runners.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15238>
See 786fa3435c for the rationale of this variable, but the point is to
avoid many error reports for conformance conformance issues within the
VK-CTS shaders.
Acked-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14660>
- Add the scripts to the prepared Mesa artifacts for use in later
runner stages.
- Add a template generator (generate_b2c.py) which reads and
validates (very lightly for now) the Gitlab job environment and then
spits out a YAML file describing the necessary test workload to be
sent to a Valve CI gateway.
Acked-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14660>
This commit adds support for Vulkan backend on a630_skqp job.
= Needed changes
- Needed to install libvulkan-dev package on system
- Refactored the way the available skqp reports are printed
tested in development builds with skia tools
Piglit expectations had to be updated in various drivers due to !14750 not
having bumped the tags when it tried to uprev.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14686>
The Android CTS 10 version is relative old when compared with skia main
branch, which was being used before. Some modifications in the skqp
build/runner scripts were needed to make it run on CI.
- skqp versions from android-cts have already all assets inside
platform_tools folder.
- along with the assets, are the render and unit files which are
expected to pass in the Android CTS execution.
- removed custom test files from the a630 folder, to make it comply
with the CTS expectations.
- include new patches to remove Python2 dependencies and avoid the
installation of it in rootfs.
- strip binariesthe built binaries `skqp` and `list_gpu_unit_tests`, as
`is_debug = false` gn argument did not work, maybe it is not well
tested in development builds with skia tools
- use Clang instead of GCC. The GCC support is not so graceful as it is
in the skia main branch, some NEON instructions needs to be turned off
in the GCC compilation, causing different tests result. This change
does not imply a bigger rootfs, since the built skqp binary uses GCC
libc++ and other library runtimes. So clang is just a build
dependency.
= Changes in skqp results =
Some errors were found for GL backend and unit tests. GLES and VK tests are green.
All the failed tests were classified as expected to fail in the render and unit tests list.
```
gl_blur2rectsnonninepatch
gl_bug339297_as_clip
gl_bug6083
gl_dashtextcaps
```
```
SRGBReadWritePixels (../../tests/SRGBReadWritePixelsTest.cpp:214 Could not create sRGB surface context. [OpenGL])
```
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14686>
Add a global-level variable that allows disabling all jobs that would
have gone to the Collabora lab, to be used in case of outages.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15150>
The mechanism currently used to pass data from the dEQP child process
executed in a crosvm guest environment towards the deqp-runner wrapper
script that starts the crosvm instance is based on creating, writing
and reading regular files.
In addition to the main drawback of using the storage, this approach
is potentially unreliable because the data cannot be transferred in
real-time and there is no control on ending the transmission. It also
requires a forced sleep for syncing the content, while the minimum
amount of time necessary to wait cannot be easily and safely
determined.
Replace this with an IPC based on the virtio transport for virtual
sockets (virtio-vsock).
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14995>
Enable support for Virtual Sockets over virtio in kernel configuration
to optimize the data transfer between crosvm and host system.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14995>
Provide the 'socat' utility in 'debian/x86_test-gl' container to be used
later for improving the inter-process communication with crosvm guest
tasks based on the virtio transport for Virtual Sockets (virtio-vsock).
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14995>
Having the Mesa Shader Cache stored on a tmpfs mount point reduces the
tests execution duration by 2-3 %, while preventing several hundreds of
megabytes to be written on the storage media.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14995>
These tests will explore some scenarios involving LAVA delays to submit
the job to the device, some device delays outputting data to LAVA
logs, and sensitive data protection.
For example, the subtests from test_retriable_follow_job, "timed out
more times than retry attempts" and "very long silence" caught a bug
where a job retried until the limited attempts and the CI job still
succeeded. https://gitlab.freedesktop.org/mesa/mesa/-/jobs/18325174
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14876>
lava_job_submitter.py unit tests are written in pytest and uses
freezegun in order to simulate timeouts in some tests scenarios. So,
this commit adds the packages `python3-pytest` and `python3-freezegun`
to fulfill this dependencies.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14876>
When the lava_job_submitter.py retry loop finishes normally (without
falling through break-loop) it means that the submitter has exceeded the
retry count limit. However, when it happens the script
finishes normally. This patch adds a treatment to this case, warning the
user what happened and forcing the job to fail.
Moreover, this commit will make retry configurations configurable by
CI job, as it can take the default value from the following variables:
- LAVA_DEVICE_HANGING_TIMEOUT_SEC
- LAVA_WAIT_FOR_DEVICE_POLLING_TIME_SEC
- LAVA_LOG_POLLING_TIME_SEC
- LAVA_NUMBER_OF_RETRIES_TIMEOUT_DETECTION
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14876>
Ensure that we are using a recent virglrenderer to catch potential regressions
early.
Signed-off-by: Corentin Noël <corentin.noel@collabora.com>
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15023>
The main thing is VK 1.3 testing, but also includes test bugfixes. The
1.3 CTS required an uprev of deqp-runner to handle a new style of test
output, and that deqp-runner brings in some neat new features, too (piglit
in your deqp-runner suite, and extension list checking).
A bunch of VK tests got renamed, so I replaced panvk's custom test list
with simple include filters on the main test list.
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> (panvk)
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14920>
This brings in some interesting new vulkan tests and fixes for the
spurious KHR-GL TF failures. Also, reduces the runtime of
dEQP-GLES31.functional.ssbo.layout.random.all_shared_buffer.36 so that it
should stop timing out.
Acked-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13779>
For GL, we disable the dlclose() call on the driver in asan builds so that
leak reports get proper backtraces. For Vulkan, the dlclose() happens
from libvulkan so you need a bigger hammer to keep our drivers loaded.
Acked-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14235>
crosvm-runner.sh was using `export -p` to create an environment script
for the virtualized system, but this command will dump every declared
environment variable in the system, which includes Gitlab's CI variables
with sensitive data, such as passwords and auth tokens.
Replacing `export -p` to `generate-env.sh`, which only exports the
necessary variables for Mesa CI jobs.
Extra changes:
* Stop changing ${PWD} variable programmatically in scripts. ${PWD} is a
variable used by most prolific coreutils and bash commands, such as `cd`
and `pwd`, besides it is set by subshells [1]; changing this variable
may lead to complex situations.
As drop-in replacement for ${PWD}, use ${DEQP_BIN_DIR} to flag that
there is a special folder where dEQP should be run.
* Double quote path and array variables. See: https://github.com/koalaman/shellcheck/wiki/SC2086
* Do not export variables directly from commands output. See: https://github.com/koalaman/shellcheck/wiki/SC2155
[1]
```
$ cd /tmp
$ export PWD=test; bash -c 'echo $PWD'
/tmp
```
v2:
- Revert $DEQP_BIN_DIR quoting in crosvm-runner.sh and crosvm-init.sh
- Log all the passed variables to stdout, to help with debugging when
new variable are needed to be put in `generate-env.sh`
v3:
- Revert $DEQP_BIN_DIR quoting leftovers
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14626>
While it's not the primary interface to interpreting trace job failures,
it was set in all the traces jobs it looks like and it's low cost anyway.
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14604>
You have to do this as part of the traces workflow, otherwise there are no
baseline images for your driver to compare to in the HTML summary.
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14604>
It's always empty for traces. This reduces more noise in the job logs so
people are more likely to see the link to the HTML.
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14604>
You really want to be reviewing the HTML summary with image diffs, not the
junit XML (though we do still generate it so you get the results in the
gitlab UI if that's how you like to interact with it).
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14604>
The first container stage ("build") is for dependencies of the build.
These are infrequently-changing things like Visual Studio, LLVM, git,
and also meson. The second container stage ("test") currently depends
on the first, and adds test dependencies like piglit.
This lets us rev piglit without having to rebuild LLVM.
Acked-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14637>
In some cases the file paths passed to crosvm for execution do not point
to dEQP binaries, but can be wrapper scripts, like deqp-runner.sh.
Detect such cases and skip changing the working directory.
Additionally, use the POSIX compliant command substitution syntax
instead of the obsolete variant based on backquotes.
Fixes: 81f25d8f27 ("virgl/ci: Run each dEQP instance in its own VM")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Rohan Garg <rohan.garg@intel.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14413>
In some corner cases like the kernel oops, we do not get the relevant
log messages from crosvm process to help with debugging.
Note there is currently a double redirection of its stdout stream, but
the content eventually ends up in /dev/null.
Let's fix this by redirecting both stdout and stderr streams to a
dedicated file, to avoid clobbering the output from the script/program
running inside crosvm. This is particularly required for the scenario
that involves deqp-runner starting crosvm via a *.toml suite.
Additionally, drop the unnecessary usage of 'stdbuf' and set the 'quiet'
kernel command-line parameter to get rid of the noise generated during
crosvm boot process.
Although not directly related, do some cleanup by removing the
temporary folder on script exit.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Rohan Garg <rohan.garg@intel.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14413>
Ensure virglrenderer library is built before crosvm in order to allow
dynamic linking. This is needed for the scenarios where a different
virglrenderer library must be provided before launching crosvm, e.g.:
the upcoming Virgl CI solution that shares Mesa CI containers.
Additionally, this provides the virgl_test_server binary which is
required by piglit-runner.sh and deqp-runner.sh scripts when using
the virpipe Gallium driver.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Rohan Garg <rohan.garg@intel.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14413>
crosvm-runner.sh doesn't correctly report the script execution status
if the exit code file is missing.
Fix this by returning 1 when there is no exit code available from the
script that was executed.
Fixes: 81f25d8f27 ("virgl/ci: Run each dEQP instance in its own VM")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Rohan Garg <rohan.garg@intel.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14413>
Move the statement responsible for creating the results output path
before 'virgl_test_server' is started in 'piglit-runner.sh' script.
This ensures the server log file will be available in the pipeline job
artifacts archive.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Rohan Garg <rohan.garg@intel.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14413>
In order to enable container reuse in Virgl CI, keep 'cmake' in the
container.
Additionally, provide the 'check' utility.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Rohan Garg <rohan.garg@intel.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14413>
Add support for building and installing deqp-runner from a git source
repository to facilitate further development & testing of new features
or simply making use of the latest upstream changes which were not
already tagged as a new package version.
The git revision to be built must be specified by setting
'DEQP_RUNNER_GIT_REV' env variable. To specify a git tag name instead,
'DEQP_RUNNER_GIT_TAG' variable must be used. It is also possible to
indicate a custom git repository via 'DEQP_RUNNER_GIT_URL'.
If neither a git revision or tag name has been set, deqp-runner is
installed from the rust package registry (the default behavior).
v2: Make use of '--git' and '--rev' cargo args to automate the git
checkout operation (Rohan).
v3: Allow Git URL override by using the hardcoded URL only when
DEQP_RUNNER_GIT_URL is not already set.
v4: Override 'EXTRA_CARGO_ARGS' to optimize the script and avoid a
second call to 'cargo install'. Additionally, add support for
indicating git tags (Rohan).
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Rohan Garg <rohan.garg@intel.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14413>
The updated version offers, among others, improved logging support to
help debugging failing tests.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Rohan Garg <rohan.garg@intel.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14413>
Moving common variables out allows for other projects like virglrenderer
to be able to reuse Mesa CI's containers
Signed-off-by: Rohan Garg <rohan.garg@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
[cristian: fixed conflicts while rebasing on latest main; updated tags]
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14413>
In order to enable container reuse in Virgl CI, keep libgbm-dev in the
container.
Signed-off-by: Rohan Garg <rohan.garg@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
[cristian: discarded the update of MESA_IMAGE_TAG in debian/x86_build]
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14413>
According to RFC 4189 CSV files should be encoded using CRLF newlines,
not LF. This helps compatibility with tools, like python's csv module,
who always uses CRLF.
While we're at it, normalize the one CSV that was CRLF in-repo to LF,
and let git do the newline-normalization when needed instead.
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12405>
Brings in these changes:
af1785f31 occlusion_query_conform: skip GetQueryCounterBits test if needed
dad078717 occlusion_query_conform: convert to pilgit subtests
b52c1c761 glsl-1.30: test nested preprocessor concat
6c4da153b texture-storage: Fix subtest result handling of skips.
4343f19db fbo-integer: Remove the invalid DrawPixels test.
e3842f2fe arb_dsa: exclude stencil8 textures from test sets.
ce8649be7 spec/ext_external_objects: Fix build on Debian systems
4e553838f glsl: add basic tests for desktop GLSL invariant qualifier linking
7e61e5199 Tests for variable in and out of loop scope
f855ad1c8 fbo-mrt-alphatest: Only require GLSL 1.20
9be2fe999 glx: add glx-multi-display-single-pbuffer test
bfe290725 glx: add glx-swap-pbuffer test
efa64335e framework: Fix build on Windows when using waffle
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14468>
Cutting the extra VK mustpass files is 315MB out of 1.5GB of the amd64
rootfs. pip was 10MB. The rustup toolchains were massive (over a GB
IIRC) on the x86 container images.
Hopefully helps with #5837
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14460>
This commit makes `kernel+rootfs_arm64` job build and install skqp on
ARM64 devices rootfs.
Skia repository has a tool to prepare skqp models located at
`tools/skqp/cut-release`, which get files from [Skia
Gold](https://skia.org/docs/dev/testing/skiagold/), generate
files.checksum, rendertests.txt and unittests.txt. One gives a range of
commits to let `cut-release` find the right resources to prepare skqp
for the user. However, it is failing, since it fails when trying to get
image packages from a range of commits via HTTPS from the host
https://public-gold.skia.org but it responds with error 404 every time.
I tried a range a thousand of commits, yet it still does not give
results. The workaround employed was to recover the most recent
`files.checksum` and `rendertests.txt` files from the git history and
generate `unittests.txt` from `list_gpu_unit_tests` binary.
`skqp` runs two lists of tests, `rendertests.txt` and `unittests.txt`.
Both must be located inside the `skqp` assets folder. The first list
uses GL and GLES to test rendering scenarios. The second runs some unit
tests that do not render an image per se.
In order to make the first `a630_skqp` to be green, the crashing tests
were removed from the test lists and the expectations of the failing
ones were updated.
It is worth noting that `rendertests.txt` can bring some detail about
each test expectation, so each test can have a max pixel error count, to
tell `skqp` that it is OK to have at most that number of errors for that
test. See also:
https://github.com/google/skia/blob/main/tools/skqp/README_ALGORITHM.md
As each render backend has a different error count, two different
`rendertests.txt` files were created,
`src/freedreno/ci/freedreno-a630-skqp-gl_rendertests.txt`,
`src/freedreno/ci/freedreno-a630-skqp-gles_rendertests.txt` and
, which one refers to GL and GLES tests respectfully.
The unit tests file for a630 is located at
`src/freedreno/ci/freedreno-a630-skqp_unittests.txt`
```
aaclip
domain
formats
highcontrastfilter
rectangle_texture
yuv_make_color_space
```
```
ProcessorOptimizationValidationTest
VkProtectedContext_CreateNonprotectedContext
VkYCbcrSampler_DrawImageWithYcbcrSampler
VkYCbcrSampler_NoYcbcrSurface
```
Each test was updated with the max_error count equal to the first run result.
```
analytic_antialias_inverse
async_rescale_and_read_dog_down
async_rescale_and_read_dog_up
async_rescale_and_read_rose
async_rescale_and_read_text_down
async_rescale_and_read_text_up
async_rescale_and_read_text_up_large
async_rescale_and_read_yuv420_rose
complexclip2_path_bw
encode-platform
imageblur_large
lcdtextsize
onebadarc
onefailarc
scale-pixels
surfaceprops
textfilter_color
textfilter_image
```
Considering all the following tests results as wrong.
```
async_rescale_and_read_no_bleed
backdrop_imagefilter_croprect_persp
complexclip2
imageblurrepeatmode
mixerCF
overdrawcolorfilter
patch_alpha
patch_primitive
rrect_clip_bw
scaledemoji_rendering
yuv_splitter
```
v2:
a) add link to HTML report on job log
b) remove extraneous spaces diff
c) remove unnecessary conditions from build-skqp.sh
d) use fixed skqp source commit SHA
v3:
a) Use only main skia repository to fetch models and build skqp
b) Use list_gpu_unit_tests binary to create a base unittests.txt file
c) Remove crashing tests
d) Set failing tests expectations for the first skqp run
v4:
a) Remove clang dependency
b) Separate each skqp backend result into its folder
c) Regroup a630_skqp in one job
v5:
a) Separate tests files per driver
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/5580
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14146>
Currently we always just pull in whatever version of
virglrenderer happens to be TOT in googlesource.
Instead, pin a specific version, and this should also
trigger an update of the container when this versions
is changed.
v2: Fix spelling error (tomeu)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12542>
Reviewed-by: Emma Anholt <emma@anholt.net>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10153>
But don't bail immediately, instead print out some more lines after the
hang, hopefully catching info about the cause of the hang.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14033>
So instead cancel the read first, and then close. Make sure the
serial-reading properly detects this cancelled condition under all
circumstances and exits.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14033>
Move all the NIR related debug environmental variables in a single
NIR_DEBUG one.
Use NIR_DEBUG=help to print all the available options.
v2:
- Use a macro to simplify (Marcin, Jason)
- Remove wrong changes (Marcin)
v3 (Marcin):
- Remove rendundant NIR mentioning in option descriptions.
- Unwrap option descriptions.
- Ensure the constant is unsigned.
- Use extern array to remove switch.
v4:
- Add missing kernel shader (Jason).
- Add unlikely() (Marcin).
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13840>
For every CI job, put JWT content into a file and unset CI_JOB_JWT
environment var
=======
* virgl jobs:
- Share JWT token file to crosvm instance
- Keep using `export -p` due to high complexity in the scripts
of these jobs. At least, the CI_JOB_JWT will not be leaked,
since it is being unset at the `before_script` phase of each
Mesa CI job.
* iris jobs: Update lava_job_submitter to take token file as argument
- generate-env with CI_JOB_JWT_TOKEN_FILE
- create token file during baremetal init stage
* baremetal jobs: Copy token file to bare-metal NFS
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14004>
Rather than relying on distro packages, build libwayland and
wayland-protocols from known versions everywhere we need it.
The only place we do not do so but rely on distro packages is the LAVA
rootfs, for which it does not matter right now since the version is
sufficiently new, but this could/should be cleaned up later.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11248>
Rather than open-coding libwayland install for each container, create a
common build script like the rest, using both git and meson like the
rest.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11248>
LLVM has all the required intrinsics available on IBM Z, so use them for
rounding operations (they will be implemented as a single instruction).
This change makes the test case lp_test_arit pass, because it avoids
using the buggy generic code.
v2: update .gitlab-ci/cross-xfail-s390x to reflect passing lp_test_arit
Signed-off-by: Marius Hillenbrand <mhillen@linux.ibm.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13927>
And use my fork while we upstream some improvements to Crosvm that make
it more appropriate for using in CI.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Corentin Noël <corentin.noel@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12828>
Currently we run deqp-runner inside a single VM, which makes very poor
use of the available CPUs because Virgl has a bottleneck in the VMM that
serializes everything.
With this change, we can run several Crosvm instances in a runner and
make full use of the CPUs. Getting the same coverage with 3 runners
instead of 6.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Corentin Noël <corentin.noel@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12828>
So we can use well-known absolute paths in configuration files.
Otherwise, the install dir is within $CI_PROJECT_DIR, which changes
between jobs.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Corentin Noël <corentin.noel@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12828>
-static-libstdc++ doesn't exist on the Android NDK, casuing all
later has_argument calls to return false even though the compiler
supports that argument.
Fixes: 3aee462781 "meson: add windows compiler checks and libraries"
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13164>
Needed for RADV.
The mirror situation is kinda messy since the library is not
maintained and the original website is offline. Put a mirror
in that seemed to be used by some non-fdo CIs already, but
if reliability is still a concern we can discuss more mirrors.
There is an alternative implementation that is maintained in
elfutils, but that doesn't build on Android:
1) Doesn't build with clang (resolved in git, so next release probably)
2) Needs argp_parse with is a glibc specific feature.
There is a version of elfutils in AOSP but instead of fixing upstream
they just made an Android.bp that avoids building most stuff, which
isn't really usable here.
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13164>
Seems I bumped the tag previously but not the script. Let us do
better this time.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13164>
So far only LAVA jobs make use of it, but I guess baremetal could be
extended to have these timeouts as well.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13441>
* Update Kconfig for x86_64 and ARM64. Follow the dependency tree of the
kernel modules to make sure that the intended configurations are being
set. Check scripts/merge_config.sh output as well to see if there is
a requested Kconfig not being considered.
For a630 devices:
* Use kernel version with a6xx workaround for frequency scaling
* Enable CONFIG_QCOM_LMH targeting a630 slowness on new kernel
---- Out of tree patches used ----
For a360 device:
* Revert a commit which remove slpi_region from msm8996:
8b0031f8bda2 ("Revert "arm64: msm8996: fix memory region overlap"")
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13089>
We've noticed issues with these tests when uprevving Mesa in Chrome OS.
This CI catches some existing failures, and some debug-build assertion
failures as well.
To do this, uprev deqp-runner for its new gtest-runner command. This
runner is not as efficient as I would hope, due to some expensive code in
gtest. I've reported the issue to gtest and it should be easily fixable,
but for now it at least means we get to use the same baseline/skip/flake
handling we have from deqp and piglit runners.
I also fixed build-libdrm for our rootfses to not throw away libdrm's
share directory, which was causing a bunch of test-time spam from radeon's
libdrm when trying to look up its marketing name tables (not that big of a
deal for deqp-runner, but really noisy for piglit and libva-utils which
make gallium screens approximatly per-test).
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13419>
The test names are definitely unique (deqp has specific prefixes, piglit
uses '@' as a separator instead of '.'), so we can just have a single file
regardless of test type. Merges the two groups of xfails together so you
can't mix up which file to edit (I certainly have), and so that we don't
need to introduce yet another set of files when we add gtest for libva.
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Acked-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13517>
We have two testsuites with the same format for fails/flakes/skips files,
and test names that are definitely unique. As I'm about to add a third
testsuite (gtest for libva-utils), so let's have just one file each for
fails/flakes/skips instead of one per type of testsuite. This starts the
move with just the bulk rename of deqp.
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Acked-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13517>
Changing these variables won't do anything for you otherwise.
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13372>
deqp hasn't been linking against that in quite some time.
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13372>
This should improve their reliability and speed a little by getting
deqp-runner off of asan. This removes the last jobs setting
TEST_LD_PRELOAD, so remove passing that variable around from other
scripts.
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13372>
This is prettier in the log files, less shell code, and for non-suite mode
adds checking that the driver has the right git sha1. Also, no need for
suites to have a DEQP_VER to say which dEQP we should run for the renderer
check.
The version checks can help us make sure that GL version exposed doesn't
accidentally regress, and the ".*git" checks that we're using a git
version of Mesa rather than something that snuck in through distro
packages.
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13372>
We can use the general "how parallel should we go on this runner?" env var
and save a bunch of massaging env var names. Fixes how PIGLIT_PARALLEL
looked like it was useful but actually wasn't passed through to HW
runners.
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13372>
Nobody uses it any more, and you could just put it in DEQP_OPTIONS.
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13372>
Just run some selected tests for now because we miss a lot of
functionality, which would cause so many crashes that the runs
aren't practical.
Once the core functionality is implemented, we can switch to the master
case list with skips.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13016>
Add deqp gles2 CI run for GC2000.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12852>
Makes it possible to use e.g. a ser2net server in the lan.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12852>
Build the kernel with CONFIG_DRM_ETNAVIV=y and include
imx6q-cubox-i.dtb.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12852>
* Refactor timeouts and retry attempts constants to variables in the top
of the python script.
* Increase LAVA job timeout value from 1 minute to 5 minutes, since the
timeout detection is just a heuristic based on the log silence in LAVA
devices. If we keep 1 minute timeout, maybe we could cancel jobs that
have tasks which may take too long to respond. Also, one minute
timeout is prone to misdetect scenarios when some network errors or
slowness may happen.
* Increase polling rate to check if the job has started from 1 check
every 30 seconds to 1 check every 10 seconds. Since it was taking 30
seconds in the worst case to start to get the log output from a LAVA
job. It is important to note that some LAVA jobs take less than 2
minutes to finish, so a 10 second wait would be more suitable in those
cases.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12870>
In addition to a global skip list introduced in
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11333
(enabled by
https://gitlab.freedesktop.org/anholt/deqp-runner/-/merge_requests/4)
it is also useful to have a per-driver skip list in addition to a
per-gpu list. Now, there are multiple levels at which skips can be
specified, from least to most specific,
- (deqp|piglit)-all-skips.txt :: affecting all tests
- (deqp|piglit)-$(DRIVER_NAME|VK_DRIVER|GALLIUM_DRIVER)-skips.txt ::
affecting the specified driver
- (deqp|piglit)-$GPU_VERSION-skips.txt :: affecting a specific GPU
This idea could be useful for -fails.txt as well.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Martin Peres <martin.peres@mupuf.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11426>
VK-CTS v1.2.7.0 has buggy tests that only work if DRM support is
available for them (drm_files_exist). This isn't exposed in the Mesa
CI by other farms, because their infra installs libdrm-dev as part
of either rootfs generation for freedreno/broadcom or respective
container stages (for lava). In the case of radv, we directly use the
x86 Mesa testing containers, so we are the odd ones out here.
By moving the building of the custom libdrm above the building of
vk-gl-cts, it will compile in support required for this test to pass,
ensuring the x86_test-vk container has the right dependencies to match
the rest of the CI. Lava actually installs drm development files
twice, once from the Debian repos, which vk-gl-cts then compiles
against, and a second time from a tarball, which the tests will use at
runtime. Seemed a little cleaner to use the version of libdrm
specified in the Mesa CI, and hence used at both build time and
runtime.
A bug should be raised with the testsuite to avoid this in the future,
but we should probably have libdrm development files exposed for these
components anyway.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Martin Peres <martin.peres@mupuf.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12777>
Besides the sed being broken for some trace names, now we have all
needed information in the artifacts so the dashboard isn't needed.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12675>
Brings in these changes:
99be1b06ff36 framework/replay: Display the image differences if any
3074b9c72b3d glsl-predication-on-large-array: Test predication on values from large array
c97da22d35b4 cmake: Fix gbm test compiling
0cbccd68c3c1 piglit: Find our data directory when we're invoked through a symlink
4eb71fc10bbe arb_sso: add test that has explicit locations and array fields in ifc
fa9c82380273 glsl-1.30: test shadow var in a switch
aa7f042b0417 glsl-1.30: add tests for incorrect "compare to 0" optimizations
60138ef32ec1 add explicit tests for GetFragDataLocation/Index(gl_Frag*)
4a8806696b90 egl: add test for EGL_KHR_display_reference
d6b7053b4e52 glsl-1.30: test that switch expression is evaluated once
8023a3c945c3 arb_shader_storage_buffer_object: Require extension on the new test
8820cac60827 pbobench: Fix sometimes-uninitialized warning.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12675>
Add a time.sleep call between proxy.scheduler.jobs.logs calls, since
they do not block. This will relieve some request pressure on LAVA
dispatchers.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12797>
According to ARB_tbo spec, default format is LUMINANCE8, but according
to core spec, it is R8.
This fixes piglit's spec@arb_texture_buffer_object@get test with drivers
supporting ARB_tbo spec but OpenGL/ES < 3.1.
v2:
- Compare against compat profile (Ilia)
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12774>
I'd like to support EGL on Windows, using the same architecture as Linux.
On Linux, libgallium_dri.so is a "megadriver," containing the Mesa Gallium
state tracker, plus the actual driver implementations.
Now, on Windows, libgallium_wgl.dll is a proper OpenGL ICD, and OpenGL32.dll
is just a stub DLL which implements the wgl* APIs in terms of that ICD.
This is the more "architecturally clean" way to share the state tracker
between EGL and WGL.
Reviewed By: Bill Kristiansen <billkris@microsoft.com>
Reviewed-by: Charmaine Lee >charmainel@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12677>
... before changing the PM settings.
Otherwise, we hit a kernel warning in Qualcomm devices and the device is
left in a non-functional state.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12644>
Use Piglit's replay profile to measure and store the time that frames
take to render in the GPU.
This job won't run automatically in regular pipelines, but will be
triggered automatically by a script for every successful pre-merge
pipeline.
This is because we want to generate performance data for every relevant
commit merged in main, but we don't want to keep a device busy during
the pre-merge run.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12236>
Using suites makes load-balancing our jobs much easier, keeps the CPU busy
handling the a630_gles_others.sh test sets (and improves the output and
baseline handling for them), and makes it trivial to add in more short
test sets.
a306: still 5 jobs, and we add KHR-GLES2 (KHR-GLES3 is unstable)
a530: still 5 jobs, added KHR-GLES*
a630_gl: 5 jobs becomes 4, and we add KHR-GLES*
a630_vk: still 3 jobs, now 1/3 of all VK instead of 1/4.
a630_vk_full: still 2 jobs, now includes full bypass testing, partial
no-force testing, and testing of pre-merge-skipped tests.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12256>
Enable CI for lima again on meson-gxl-s805x-libretech-ac boards
with Mali-450.
These boards are managed by a LAVA instance and so follow the LAVA CI
workflow in Mesa.
The goal is to have coverage for deqp-gles2, as lima is a GLES2-only
driver.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11789>
As we aren't testing LLVMPipe in these jobs, and shader compilation is
currrently the bottleneck.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12196>
Sometimes, the VM powered off before all the output from the guest got
to the console.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12196>
Crosvm deals with virtio-gpu commands sequentially, so parallelization
in the host doesn't help much.
Also, too much parallelization in the guest causes some tests to time
out.
So reduce the number of dEQP instances being run concurrently, make sure
we dont limit the number of CPUs being used in the host and schedule
more jobs in CI to keep the times below 10 minutes.
Closes: #5172
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12196>
Rather surprisingly, the value stored in the NumVectors field of the
DXIL PSV header isn't the number of vectors, but rather the *maximum*
vector used.
This makes a difference when we're not writing to the first element of
an array, where we would previously generate a validation error.
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12197>
Use Piglit's replay profile to measure and store the time that frames
take to render in the GPU.
This job won't run automatically in regular pipelines, but will be
triggered automatically by a script for every successful pre-merge
pipeline.
This is because we want to generate performance data for every relevant
commit merged in main, but we don't want to keep a device busy during
the pre-merge run.
Signed-off-by: Antonio Caggiano <antonio.caggiano@collabora.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12185>
Brings in duplicate subtest fixes, gpu_shader4 tests, and more. This
shuffles the radeonsi fractional test run, so we get to catch up with more
failing subtests.
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12110>
Everyone can get artifacts now. Let's make those artifacts useful.
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12110>
The deqp-runner "suite" support lets us specify all the deqp variants at
once and shard them across gitlab jobs, so we reduce docker overhead and
get fewer jobs to review the output of.
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12110>
Allows to use virtio-gpu to actually test the virgl driver.
Signed-off-by: Corentin Noël <corentin.noel@collabora.com>
Acked-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11320>
Also require newer dependencies.
This makes it easier to debug possible crosvm issues as a big refactor occured since the
previous commit included in the CI.
Signed-off-by: Corentin Noël <corentin.noel@collabora.com>
Acked-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11320>
We need a newer Rust toolchain to be able to build the latest crosvm.
Signed-off-by: Corentin Noël <corentin.noel@collabora.com>
Acked-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11320>
We are only using the result once so we spend more time optimizing it than
actually using it.
Signed-off-by: Corentin Noël <corentin.noel@collabora.com>
Reviewed-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11320>
Now that we've disabled brilinear and have per-pixel cube derivatives, we
can use the same rendering paths that end users will see.
In a few cases, we switch to the no_quad_lod option instead, because
otherwise we get a piglit failure.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12125>
v2:
- Read mustpass files from vk-default.txt (Matt)
- Remove freedreno atomic geom tests from fail list (Emma)
- Move freedreno flake to separated line (Emma)
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12069>
GitLab doesn't merge the rules array from a job that is extended, so we
were missing the changes rules.
To avoid this, create a .freedreno-rules-restricted job that includes
the changes rules and the restricted user checks.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Fixes: 92f9141f00 ("ci/freedreno: Test with non-redistributable traces")
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/5139
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12122>
Gert Wollny
Cristian Ciocaltea
Charlie Turner
Guilherme Gallo
Tomeu Vizoso
Marek Olšák
Michel Dänzer
Samuel Pitoiset
Corentin Noël
Emma Anholt
Jesse Natalie
Marcin Ślusarz
Rohan Garg
Erik Faye-Lund
Christian Gmeiner
Caio Oliveira
Erik Faye-Lund
Timothy Arceri
Dylan Baker
Ilia Mirkin
Juan A. Suarez Romero
Daniel Stone
Marius Hillenbrand
Bas Nieuwenhuizen
Enrico Galli
Boris Brezillon
pal1000
Rob Clark
Erico Nunes
Eric Engestrom
Italo Nicola
Antonio Caggiano
Dave Airlie