It turns out the simulator was not treating this bit the same as the RPi,
and I'd forgotten to remove it when turning on early Z. The result was
that you'd get big chunks of your rendering missing.
This reverts commit 0543630d0b.
It caused flickering artifacts in Steam games such as Team Fortress 2 or
Left 4 Dead 2.
We could probably only enable this optimization by also making sure the
shader code only uses either SI_PARAM_LINEAR_CENTROID or
SI_PARAM_LINEAR_CENTER, not both. This would probably require a shader
variant.
Sorry I didn't remember this when reviewing the reverted change.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
You would not believe the mess GCC 4.8.3 generated for the old
switch-statement.
On Bay Trail-D using Fedora 20 compile flags (-m64 -O2 -mtune=generic
for 64-bit and -m32 -march=i686 -mtune=atom for 32-bit), affects
Gl32Batch7:
32-bit: Difference at 95.0% confidence -0.37374% +/- 0.184057% (n=40)
64-bit: Difference at 95.0% confidence 0.966722% +/- 0.338442% (n=40)
The regression on 32-bit is odd. Callgrind says the caller,
_mesa_is_valid_prim_mode is faster. Before it says 2,293,760
cycles, and after it says 917,504.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
On Bay Trail-D using Fedora 20 compile flags (-m64 -O2 -mtune=generic
for 64-bit and -m32 -march=i686 -mtune=atom for 32-bit), affects
Gl32Multithread:
32-bit: Difference at 95.0% confidence 0.416027% +/- 0.163529% (n=40)
64-bit: Difference at 95.0% confidence 0.494771% +/- 0.259985% (n=40)
Gl32Batch7 had no difference proven at 95.0% confidence (n=120) on
32-bit or 64-bit.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The previous check was insufficient (as it did not take 'indices' into
consideration), and DX10 hardware does not need this check anyway.
Since index_bytes is no longer used, remove it.
On Bay Trail-D using Fedora 20 compile flags (-m64 -O2 -mtune=generic
for 64-bit and -m32 -march=i686 -mtune=atom for 32-bit), affects
Gl32Batch7:
32-bit: Difference at 95.0% confidence 1.66929% +/- 0.230107% (n=40)
64-bit: Difference at 95.0% confidence -1.40848% +/- 0.288038% (n=40)
The regression on 64-bit is odd. Callgrind says the caller,
validate_DrawElements_common is faster. Before it says 10,321,920
cycles, and after it says 8,945,664.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This doesn't affect performance, but it feels more correct.
On Bay Trail-D using Fedora 20 compile flags (-m64 -O2 -mtune=generic
for 64-bit and -m32 -march=i686 -mtune=atom for 32-bit), affects
Gl32Batch7:
32-bit: No difference proven at 95.0% confidence (n=120)
64-bit: No difference proven at 95.0% confidence (n=120)
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Instead of having an extra pointer indirection in one of the hottest
loops in the driver.
On Bay Trail-D using Fedora 20 compile flags (-m64 -O2 -mtune=generic
for 64-bit and -m32 -march=i686 -mtune=atom for 32-bit), affects
Gl32Batch7:
32-bit: Difference at 95.0% confidence 1.98515% +/- 0.20814% (n=40)
64-bit: Difference at 95.0% confidence 1.5163% +/- 0.811016% (n=60)
v2 (Ken): Cut size of array from 64 to 57 to save memory.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
With the switch-statement, GCC 4.8.3 produces a small pile of code with
a branch.
00000000 <brw_get_index_type>:
000000: 8b 54 24 04 mov 0x4(%esp),%edx
000004: b8 01 00 00 00 mov $0x1,%eax
000009: 81 fa 03 14 00 00 cmp $0x1403,%edx
00000f: 74 0d je 00001e <brw_get_index_type+0x1e>
000011: 31 c0 xor %eax,%eax
000013: 81 fa 05 14 00 00 cmp $0x1405,%edx
000019: 0f 94 c0 sete %al
00001c: 01 c0 add %eax,%eax
00001e: c3 ret
However, this could be two instructions.
00000000 <brw_get_index_type>:
000000: 2d 01 14 00 00 sub $0x1401,%eax
000005: d1 e8 shr %eax
000007: 90 nop
000008: 90 nop
000009: 90 nop
00000a: 90 nop
00000b: c3 ret
The function was also moved to the header so that it could be inlined at
the two call sites. Without this, 32-bit also needs to pull the
parameter from the stack. This means there is a push, a call, a move,
and a ret added to a two instruction function. The above code shows the
function with __attribute__((regparm=1)), but even this adds several
extra instructions. There is also an extra instruction on 64-bit to
move the parameter to %eax for the subtract.
On Bay Trail-D using Fedora 20 compile flags (-m64 -O2 -mtune=generic
for 64-bit and -m32 -march=i686 -mtune=atom for 32-bit), affects
Gl32Batch7:
32-bit: Difference at 95.0% confidence 0.818589% +/- 0.234661% (n=40)
64-bit: Difference at 95.0% confidence 0.54554% +/- 0.354092% (n=40)
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
...so that it can be inlined in the two places that call it.
On Bay Trail-D using Fedora 20 compile flags (-m64 -O2 -mtune=generic
for 64-bit and -m32 -march=i686 -mtune=atom for 32-bit), affects
Gl32Batch7:
32-bit: No difference proven at 95.0% confidence (n=120)
64-bit: Difference at 95.0% confidence 1.24042% +/- 0.382277% (n=40)
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
We were happily printing "Native code for unnamed vertex shader" and
"VS vec4" program for geometry shaders in our INTEL_DEBUG=gs output,
as well as the KHR_debug output used by shader-db.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
A lot of messages hardcoded the string "FS", which is confusing on
Broadwell, where we use this code for VS support as well.
shader-db particularly got confused, as it reported two "FS SIMD8"
shaders, and no vertex shaders at all. Craziness ensued.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Only GNU indent is supported when indenting autogenerated format_pack.c
and format_unpack.c files. Some non-GNU indent (Mac OS X and FreeBSD)
add extra whitespaces than break the build of those files.
Fallback to 'cat' if a non-GNU indent is found.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=88335
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Tested-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The 8888 suggests 8-bit components which is not correct, so
replace that with the actual size of the components in each
format.
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Before we were always coping from the buffer being mapped into the
temporary buffer. However, if INVALIDATE_RANGE is set, then we know that
the data is going to be junk after we unmap so there's no point in doing
the blit. This is important because doing the blit will cause a stall 3
lines later when we map the buffer.
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Patch enables ES2 extension that utilizes existing ES3 functionality.
Changes make all the subtests to run and pass in WebGL conformance
test 'webgl-draw-buffers' when running Chrome on OpenGL ES, also
Piglit test 'draw_buffers_gles2' passes.
v2: remove unused boolean (Ilia Mirkin)
v3: proper error checking for invalid values (Chad Versace)
v4: run error check explicitly for ES2 and ES3 (Kenneth Graunke)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>
This will be needed for NIR because it is typeless and treats all constants
as uint32 values and reinterprets them when they are used later. This
commit allows those values to be properly propagated.
Also, this helps some synmark shaders because it allows us to copy
propagate a 0x00000000UD into a 0.0F in a load_payload, which then lets us
combine 4 load_payloads.
instructions in affected programs: 2288 -> 2144 (-6.29%)
Reviewed-by: Matt Turner <mattst88@gmail.com>
Removes commit 7894278 changes and moves fix to _mesa_GetInternalformativ().
The original commit enabled the GL_RGB and GL_RGBA unsized internal formats
as valid for render buffers in GLES3, but this is incorrect. They should
have only been enabled for GetInternalformativ()
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88079
Reviewed-by: Chad Versace <chad.versace@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
If, for example, only the x/y/w components of in.xyzw are actually used,
we still need to have a group of four registers and assign all four
components. The hardware can't write in.xy and in.w to discontiguous
registers. To handle this, pad with a dummy NOP instruction, to keep
the neighbor chain contiguous.
This fixes a problem noticed with firefox OMTC.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
According to the OpenGL and OpenGL ES specs (sections
"FRAMEBUFFER COMPLETENESS" and "Whole Framebuffer Completeness"),
the image for color, depth or stencil attachments must be renderable,
otherwise the attachment is considered incomplete and we should report
GL_FRAMEBUFFER_INCOMPLETE_ATTACHMENT. Currently, we detect this
situation properly but report a different error.
This fixes the following 3 piglit tests:
dEQP-GLES3.functional.fbo.completeness.renderable.texture.color0.rgb_unsigned_int_2_10_10_10_rev
dEQP-GLES3.functional.fbo.completeness.renderable.texture.color0.rgba_unsigned_int_2_10_10_10_rev
dEQP-GLES3.functional.fbo.completeness.renderable.texture.color0.rgb16f
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
From GLES3 specification (page 123), "The currently bound sampler may be
queried by calling GetIntegerv with pname set to
SAMPLER_BINDINGGL_SAMPLER_BINDING".
Fixes 4 dEQP tests:
* dEQP-GLES3.functional.state_query.integers.sampler_binding_getboolean
* dEQP-GLES3.functional.state_query.integers.sampler_binding_getinteger
* dEQP-GLES3.functional.state_query.integers.sampler_binding_getinteger64
* dEQP-GLES3.functional.state_query.integers.sampler_binding_getfloat
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Previously, a cast was done to convert from float to int but there
were rounding errors.
The spec specificies in Data Conversion chapter that Floating-point values are
rounded to the nearest integer.
This patch fixes the following 2 dEQP tests:
dEQP-GLES3.functional.state_query.sampler.sampler_texture_min_lod_getsamplerparameteri
dEQP-GLES3.functional.state_query.sampler.sampler_texture_max_lod_getsamplerparameteri
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Previously, a cast was done to convert from float to int but there
were rounding errors.
The spec specificies in Data Conversion chapter that Floating-point values are
rounded to the nearest integer.
This patch fixes the following 8 dEQP tests:
dEQP-GLES3.functional.state_query.texture.texture_2d_texture_min_lod_gettexparameteri
dEQP-GLES3.functional.state_query.texture.texture_2d_texture_max_lod_gettexparameteri
dEQP-GLES3.functional.state_query.texture.texture_3d_texture_min_lod_gettexparameteri
dEQP-GLES3.functional.state_query.texture.texture_3d_texture_max_lod_gettexparameteri
dEQP-GLES3.functional.state_query.texture.texture_2d_array_texture_min_lod_gettexparameteri
dEQP-GLES3.functional.state_query.texture.texture_2d_array_texture_max_lod_gettexparameteri
dEQP-GLES3.functional.state_query.texture.texture_cube_map_texture_min_lod_gettexparameteri
dEQP-GLES3.functional.state_query.texture.texture_cube_map_texture_max_lod_gettexparameteri
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Return the proper value for two-dimensional array texture and three-dimensional
textures.
From OpenGL ES 3.0 spec, chapter 6.1.13 "Framebuffer Object Queries",
page 234:
"If pname is FRAMEBUFFER_ATTACHMENT_TEXTURE_LAYER and the texture
object named FRAMEBUFFER_ATTACHMENT_OBJECT_NAME is a layer of a
three-dimensional texture or a two-dimensional array texture, then params
will contain the number of the texture layer which contains the attached im-
age. Otherwise params will contain the value zero."
Furthermore, FRAMEBUFFER_ATTACHMENT_TEXTURE_LAYER is an alias of
FRAMEBUFFER_ATTACHMENT_TEXTURE_3D_ZOFFSET_EXT.
This patch fixes dEQP test:
dEQP-GLES3.functional.state_query.fbo.framebuffer_attachment_texture_layer
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Commit 0ae9ca12a8 put source modifiers out of the bitcast operations
by adding a MOV operation that would handle them separately. It missed
the case of ceil though: the implementation negates both its source and
destination operands. The source operand will be used for RNDD, which
we can handle normally, but we need to fix the modifier for the
negated result.
v2:
- RNDD can handle the source modifier so no need to put that one
in a separate MOV.
Fixes the following 42 dEQP tests:
dEQP-GLES3.functional.shaders.builtin_functions.common.ceil.*_vertex
dEQP-GLES3.functional.shaders.builtin_functions.common.ceil.*_fragment
dEQP-GLES3.functional.shaders.builtin_functions.precision.ceil._*vertex.*
dEQP-GLES3.functional.shaders.builtin_functions.precision.ceil._*fragment.*
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
"9.4. FRAMEBUFFER COMPLETENESS
...
Depth and stencil attachments, if present, are the same image."
Notice that this restriction is not included in the OpenGL ES2 spec.
Fixes 18 dEQP tests in:
dEQP-GLES3.functional.fbo.completeness.attachment_combinations.*
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
'4.1.4 Stencil Test' section of the GL-ES 3.0 specification says:
"In the initial state, [...] the front and back stencil mask are both set
to the value 2^s − 1, where s is greater than or equal to the number of
bits in the deepest stencil buffer* supported by the GL implementation."
Since the maximum supported precision for stencil buffers is 8 bits, mask
values should be initialized to 2^8 - 1 = 0xFF.
Currently, these masks are initialized to max unsigned integer (~0u), because
in OpenGL 3.0 and before, the initial mask values were:
"In the initial state, stenciling is disabled, the front and back
stencil reference value are both zero, the front and back stencil
comparison functions are both ALWAYS, and the front and back
stencil mask are both all ones."
The problem is that it causes the mask values to overflow to -1 when converted
to signed integer by glGet* APIs.
Fixes 6 dEQP failing tests:
* dEQP-GLES3.functional.state_query.integers.stencil_value_mask_getfloat
* dEQP-GLES3.functional.state_query.integers.stencil_back_value_mask_getfloat
* dEQP-GLES3.functional.state_query.integers.stencil_value_mask_separate_getfloat
* dEQP-GLES3.functional.state_query.integers.stencil_value_mask_separate_both_getfloat
* dEQP-GLES3.functional.state_query.integers.stencil_back_value_mask_separate_getfloat
* dEQP-GLES3.functional.state_query.integers.stencil_back_value_mask_separate_both_getfloat
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The range's min and max, and the precision value are not set correctly for the
vertex shader constants.
Fixes 1 dEQP test: dEQP-GLES3.functional.state_query.shader.precision_vertex_highp_int
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Check returned texObj is not null. If texObj is null there is already
GL_INVALID_OPERATION error set.
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
GL_UNSIGNED_SHORT_5_5_5_1, GL_UNSIGNED_SHORT_1_5_5_5_REV,
GL_UNSIGNED_INT_10_10_10_2, GL_UNSIGNED_INT_2_10_10_10_REV data types
are not explicitly allowed to work with GL_ABGR_EXT format neither
in GL nor GL_EXT_abgr specs.
Removed the corresponding mesa formats as there are no other functions
using them inside Mesa anymore.
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
_mesa_pack_rgba_span_float was the last of the color span functions
and we have replaced all calls to it with calls to _mesa_format_convert,
so we can remove it together with tmp_pack.h which was used to
generate the pack functions for multiple types that were used from
the various color span functions that have been removed.
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Now that we have _mesa_format_convert we don't need this.
This was only used to create temporary RGBA float images in the process
of storing some compressed formats. These can call _mesa_texstore
with a RGBA/float dst to achieve the same goal.
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Now that we have _mesa_format_convert we don't need this.
texstore_rgba will use the GL_COLOR_INDEX to RGBA conversion
helpers instead and compressed formats that used
_mesa_make_temp_ubyte_image to create an ubyte RGBA temporary
image can call _mesa_texstore with a RGBA/ubyte dst to
achieve the same goal.
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>