This reverts commit 10d1b0be8e.
This is unnecessary, the depend_files argument is for adding
dependencies on files that are not part of the input, which is already
done.
cc: Jason Ekstrand <jason.ekstrand@intel.com>
Fixes: 10d1b0be8e
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Move the calls to svga_hwtnl_set_fillmode() and svga_hwtnl_set_flatshade()
out of the two retry_draw_*() functions to the svga_draw_vbo() function.
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
This fixes a few Piglit transform feedback regressions caused by
commit 7a1401938b.
In that change I moved the moved svga_update_state() into the loops,
after the calls to svga_hwtnl_set_flatshade(). But
svga_hwtnl_set_flatshade() actually depends on some derived shader
state. This patch moves the svga_update_state() call into
svga_draw_vbo() so it's not duplicated in two places.
Fixes: 7a1401938b ("svga: clean up retry_draw_range_elements(),
retry_draw_arrays()")
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
If we fail to compile the normal VS or FS we fall back to a simple/
dummy shader. We need to rescan the the shader to update the shader
info. Otherwise, this can lead to further translations failures
because the shader info doesn't match the actual shader.
Found by adding some extra debug assertions in the state-update code
while debugging something else.
v2: also update shader generic_inputs/outputs, etc. per Charmaine
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
In theory this might lead to corruption if we bind a descriptor
set which is unused, because LLVM is smart and it can re-use
unused user SGPRs. In practice, this doesn't seem to fix
anything.
As a side effect, this will reduce the number of emitted
SH_REG packets.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Although meta shaders don't use any vertex buffers, there is no
behaviour change but I think it's better to do this. Though,
this saves two user SGPRs for push constants inlining or
something else.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
It was assumed that fromPlanar() could return NULL to mean
that the planar image is the same as the parent DRI image.
That assumption wasn't made everywhere though.
Let's fix things and make sure that all callers understand
a NULL result
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
fixes KHR-GL45.multi_bind.dispatch_bind_textures on Maxwell
Suggested-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
The ARB_viewport_array spec says:
"Dependencies
OpenGL 1.0 is required.
OpenGL 3.2 or the EXT_geometry_shader4 or ARB_geometry_shader4 extensions
are required.
This extension is written against the OpenGL 3.2 (Compatibility)
Specification."
As such, we should ignore it for GLES2 contexts.
Fixes:
dEQP-GLES2.functional.state_query.integers.viewport_getinteger
dEQP-GLES2.functional.state_query.integers.viewport_getfloat
on llvmpipe and virgl.
v2: Use _mesa_has_* (Ilia)
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Cc: 17.3 18.0 <mesa-stable@lists.freedesktop.org>
Generators really are never the thing you want. The problem in this case
is that a generator must create a file that contains any file that the
generated target depends on. Since brw_oa.py doesn't generate such a
file the generated sources are not regenerated even if the xml files
they should depend on changes.
While we could change brw_oa.py to write such a file, that's silly, it
depends on itself and the xml file. So we'll just use a custom target
instead, which will have the correct dependency behavior and doesn't
really add that much code.
Fixes: 3218056e0e ("meson: Build i965 and dri stack")
CC: Ian Romanick <idr@freedesktop.org>
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
From Skylake PRM Surface Formats section:
"The surface format for the typed atomic integer operations must
be R32_UINT or R32_SINT."
Fixes an error and a piglit GPU hang in simulation environment.
Piglit test: gl45-imageAtomicExchange-float.shader_test
Suggested-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.co
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "18.0 17.3" <mesa-stable@lists.freedesktop.org>
When initializing mcs, map with MAP_RAW and fill in the linear
map. Removes a place where gtt mapping is used.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
In all current uses, the linear surface is only allocated starting
at (xt1, yt1) anyway, so this improves the calling ergonomics.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
TileY's low 6 address bits are: v1 v0 u3 u2 u1 u0
Thus a cache line in the tiled surface is composed of a 2d area of
16x4 bytes of the linear surface.
Add a special case where the area being copied is 4-line aligned
and a multiple of 4-lines so that entire cache lines will be
written at a time.
On Apollolake, this increases tiling throughput to wc maps by
84.0103% +/- 0.862818%
v2: Split [y0, y1) and [y2, y3) loops apart for clarity (Jason Ekstrand)
v3: Don't reset src var (Jason), Ensure y0 <= y1 <= y2 <= y3
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This code to re-set the type of the source and destination is not
necessary since we never manipulate the types. Looks like a
left over from a time where we had to retype to float temporarily
to handle 64-bit inputs.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Divide it by two as we do for other stages. This is because the
component layout qualifier is always in 32-bit units.
Fixes issues in a new CTS test (still WIP):
KHR-GL45.enhanced_layouts.varying_double_components
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
There is still more to do in that area, but it's a good start.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This fixes a regression in the broadcast color to all color bufs case.
Fixes: 6c691081a (r600: fixup sparse color exports.)
Signed-off-by: Dave Airlie <airlied@redhat.com>
I found a shader with
DCL TEMP[0], LOCAL
DCL TEMP[1..256], ARRAY(1), LOCAL
DCL TEMP[257..512], ARRAY(2), LOCAL
DCL TEMP[513..768], ARRAY(3), LOCAL
DCL TEMP[769], LOCAL
This would remap badly, as it would add up all the spilled sizes
and subtract it from the temp for 0. If the current temp is less
than the array start break out.
Fixes: 1d871aa6 (r600g: Implement spilling of temp arrays (v2))
Signed-off-by: Dave Airlie <airlied@redhat.com>
Shaders coming from dx10 state trackers have a RET before the END.
And the epilog needs to be placed before the RET (otherwise it will
get ignored).
Hence figure out if a RET is in main, in this case we'll place
the epilog there rather than before the END.
(At a closer look, there actually seem to be problems with control
flow in general with output redirection, that would need another
look. It's enough however to fix draw's aa line emulation in some
internal bug - lines tend to be drawn with trivial shaders, moving
either a constant color or a vertex color directly to the output).
v2: add assert so buggy handling of RET in main is detected
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Nobody queries these and nobody sets them to anything useful,
the docs say TODO.
Drop them until a use appears.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Add support for GL_NUM_SHADING_LANGUAGE_VERSIONS
and glGetStringi for GL_SHADING_LANGUAGE_VERSION
v2:
- Combine similar functionality into
_mesa_get_shading_language_version() function.
- Change GLSL version return mechanism.
v3:
- Add return of empty string for GLSL ver 1.10.
- Move _mesa_get_shading_language_version() function
to src/mesa/main/version.c.
v4:
- Add OpenGL version check.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104915
Signed-off-by: Andriy Khulap <andriy.khulap@globallogic.com>
Signed-off-by: Vadym Shovkoplias <vadym.shovkoplias@globallogic.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
The EXTRA_VERSION_40 predicate is tested as part of
extra_gl40_ARB_sample_shading but there was no switch case for it.
Fixes: 77b440e42d ("mesa: Add new functions and enums required
by GL_ARB_sample_shading")
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Dylan Baker
Brian Paul
Samuel Pitoiset
Louis-Francis Ratté-Boulianne
Emil Velikov
Karol Herbst
Gurchetan Singh
Anuj Phogat
Timothy Arceri
Jason Ekstrand
Scott D Phillips
Rafael Antognolli
Iago Toral Quiroga
Dave Airlie
Roland Scheidegger
Bas Nieuwenhuizen
Vadym Shovkoplias