Instead of listing all the UNIX PIPE_OS platforms just use
PIPE_OS_UNIX. Makes BSD sockets available on PIPE_OS_BSD.
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Brian Paul <brianp@vmware.com>
OpenBSD, FreeBSD, NetBSD and DragonFlyBSD all have clock_gettime()
so use it when PIPE_OS_BSD is defined.
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Brian Paul <brianp@vmware.com>
Travis CI has moved to LLVM 5.0, and meson is detecting automatically
the available version in /usr/local/bin based on the PATH env variable
order preference.
As for 0.44.x, Meson cannot receive the path to the llvm-config binary
as a configuration parameter. See
https://github.com/mesonbuild/meson/issues/2887 and
7c8b6ee3fa
We want to use the custom (APT) installed version. Therefore, let's
make Meson find our wanted version sooner than the one at
/usr/local/bin
Once this is corrected, we would still need a patch similar to:
https://lists.freedesktop.org/archives/mesa-dev/2017-December/180217.html
v2: Create the link only to the specificly wanted LLVM version (Gert).
Cc: Eric Engestrom <eric.engestrom@imgtec.com>
Cc: Dylan Baker <dylan@pnwbakers.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Juan A. Suarez Romero <jasuarez@igalia.com>
Cc: Gert Wollny <gw.fossdev@gmail.com>
Cc: Jon Turney <jon.turney@dronecode.org.uk>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-and-Tested-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Reviewed-By: Gert Wollny <gw.fossdev@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
3 digits versions in LLVM only started from 3.4.1 on.
Hence, even if you can perfectly build with an old LLVM (< 3.4.1) in
the system while not needing LLVM at all (auto), when passing through
the LLVM version detection code, meson will fail when accessing
"_llvm_version[2]" due to:
"Index 2 out of bounds of array of size 2."
v2: Properly compare LLVM version and set patch version to 0
if < 3.4.1 (Eric).
v3: Improve the commit log explanation (Eric).
Cc: Dylan Baker <dylan@pnwbakers.com>
Cc: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
In 16631ca30e we fixed gen9 active components to account for padded
inputs in the URB, which we can have with SSO programs. To do that,
instead of going through the bitfield of inputs (which doesn't include
padding information), we compute the number of inputs from the size
of the URB entry.
Unfortunately, there are some special inputs that are not stored in
the URB and that we also need to account for. These special inputs
are identified and handled during calculate_attr_overrides().
Instead of keeping track of the exact number of inputs, we just
program active components for all possible inputs like we do in
anvil.
This fixes a regression in a WebGL program that uses Point Sprite
functionality (specifically, VARYING_SLOT_PNTC).
v2:
- Add 'Fixes' tag (Mark Janes)
- make no_vue_inputs int instead of uint32_t, and add const qualifier
to num_inputs variable (Ian)
v3:
- Do not try to count inputs correctly, just program all input
slots like we do in anvil (Ken)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105224
Fixes: 16631ca30e (i965/sbe: fix active components for SSO programs with over 16 inputs)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This is an optimization which reduces the number of flushes for
small pool buffers.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
If the query pool has been previously resetted using the compute
shader path.
Fixes: a41e2e9cf5 ("radv: allow to use a compute shader for resetting the query pool")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105292
Cc: "18.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
var->name could be NULL under ARB_gl_spirv for example. And in any
case, the code is already handing var name being NULL when reading a
variable, so it is consistent to do it writing a variable too.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
The introduction of 16-bit types with VK_KHR_16bit_storages implies that
push constant offsets could be multiple of 2-bytes. Some assertions are
updated so offsets should be just multiple of size of the base type but
in some cases we can not assume it as doubles aren't aligned to 8 bytes
in some cases.
For 16-bit types, the push constant offset takes into account the
internal offset in the 32-bit uniform bucket adding 2-bytes when we access
not 32-bit aligned elements. In all 32-bit aligned cases it just becomes 0.
v2: Assert offsets to be aligned to the dest type size. (Jason Ekstrand)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Range in 16-bit push constants load was being calculated
wrongly using 4-bytes per element instead of 2-bytes as it
should be.
v2: Use glsl_get_bit_size instead of if statement
(Jason Ekstrand)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Enables storageBuffer16BitAccess and uniformAndStorageBuffer16BitAccesss
features of VK_KHR_16bit_storage for Gen8+.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Restrict the use of untyped_surface_write with 16-bit pairs in
ssbo to the cases where we can guarantee that offset is multiple
of 4.
Taking into account that VK_KHR_relaxed_block_layout is available
in ANV we can only guarantee that when we have a constant offset
that is multiple of 4. For non constant offsets we will always use
byte_scattered_write.
v2: (Jason Ekstrand)
- Assert offset_reg to be multiple of 4 if it is immediate.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
16-bit load_ubo/ssbo operations that call do_untyped_read_vector don't
guarantee that offsets are multiple of 4-bytes as required by untyped_read
message. This happens for example in the case of f16mat3x3 when then
VK_KHR_relaxed_block_layout is enabled.
Vectors reads when we have non-constant offsets are implemented with
multiple byte_scattered_read messages that not require 32-bit aligned offsets.
Now for all constant offsets we can use the untyped_read_surface message.
In the case of constant offsets not aligned to 32-bits, we calculate a
start offset 32-bit aligned and use the shuffle_32bit_load_result_to_16bit_data
function and the first_component parameter to skip the copy of the unneeded
component.
v2: (Jason Ekstrand)
Use untyped_read_surface messages always we have constant offsets.
v3: (Jason Ekstrand)
Simplify loop for reads with non constant offsets.
Use end - start to calculate the number of 32-bit components to read with
constant offsets.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This helper used to load 16bit components from 32-bits read now allows
skipping components with the new parameter first_component. The semantics
now skip components until we reach the first_component, and then reads the
number of components passed to the function.
All previous uses of the helper are updated to use 0 as first_component.
This will allow read 16-bit components when the first one is not aligned
32-bit. Enabling more usages of untyped_reads with 16-bit types.
v2: (Jason Ektrand)
Change parameters order to first_component, num_components
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The surfaces that backup the GPU buffers have a boundary check that
considers that access to partial dwords are considered out-of-bounds.
For example, buffers with 1,3 16-bit elements has size 2 or 6 and the
last two bytes would always be read as 0 or its writting ignored.
The introduction of 16-bit types implies that we need to align the size
to 4-bytew multiples so that partial dwords could be read/written.
Adding an inconditional +2 size to buffers not being multiple of 2
solves this issue for the general cases of UBO or SSBO.
But, when unsized arrays of 16-bit elements are used it is not possible
to know if the size was padded or not. To solve this issue the
implementation calculates the needed size of the buffer surfaces,
as suggested by Jason:
surface_size = isl_align(buffer_size, 4) +
(isl_align(buffer_size, 4) - buffer_size)
So when we calculate backwards the buffer_size in the backend we
update the resinfo return value with:
buffer_size = (surface_size & ~3) - (surface_size & 3)
It is also exposed this buffer requirements when robust buffer access
is enabled so these buffer sizes recommend being multiple of 4.
v2: (Jason Ekstrand)
Move padding logic fron anv to isl_surface_state.
Move calculus of original size from spirv to driver backend.
v3: (Jason Ekstrand)
Rename some variables and use a similar expresion when calculating.
padding than when obtaining the original buffer size.
Avoid use of unnecesary component call at brw_fs_nir.
v4: (Jason Ekstrand)
Complete comment with buffer size calculus explanation in brw_fs_nir.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Like before use local variables from compile_vertex_list instead.
Remove vertex_size from struct vbo_save_vertex_list.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
The buffer_offset is used in aligned_vertex_buffer_offset.
But now that most of these decisions are done in compile_vertex_list
we can work on local variables instead of struct members in the
display list code. Clean that up and remove buffer_offset.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Replace last use on replay with _vbo_save_get_{min,max}_index. Appart from
that it is not used anymore.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Is not used anymore on replay, move the last use in display list
compilation to the original array in the display list compiler.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Is not used anymore on replay, move the last use in display list
compilation to the original array in the display list compiler.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Since we now store a set of VAOs in the display list, use these object
to get the reference to the VBO in several places.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Use the information already present in the VAO to update the current values
after display list replay. Set GL_OUT_OF_MEMORY on allocation failure
for the current value update storage.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Use the information already present in the VAO to replay a display list
node using immediate mode draw commands. Use a hand full of helper methods
that will be useful for the next patches also.
v2: Insert asserts, constify local variables.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
The master value is now stored inside the VAO already present in
struct vbo_save_vertex_list. Remove the unneeded copy from dlist storage.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
We don't zalloc the physical device so we need to unconditionally set
everything. Crucible helpfully initializes all allocations to 139 so it
was getting true regardless of whether or not the kernel actually
supports context priorities.
Fixes: 6d8ab53303 "anv: implement VK_EXT_global_priority extension"
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This reverts commit a2c1e48f15.
On BDWGT3e and KBLGT3e systems, this commit regressed the following
tests:
piglit.spec.ext_framebuffer_multisample.accuracy 2 stencil_resolve small depthstencil
piglit.spec.ext_framebuffer_multisample.accuracy 4 stencil_resolve small depthstencil
piglit.spec.ext_framebuffer_multisample.accuracy 6 stencil_resolve small depthstencil
piglit.spec.ext_framebuffer_multisample.accuracy 8 stencil_resolve small depthstencil
piglit.spec.ext_framebuffer_multisample.accuracy all_samples stencil_resolve small depthstencil
This stops a crash when running (still fails):
tests/spec/arb_gpu_shader_fp64/execution/explicit-location-gs-fs-vs.shader_test
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Nothing to do except using a busy wait loop. At least for old kernels.
A better implementation for newer kernels to come later.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105255
Fixes: f4e499ec79 "radv: add initial non-conformant radv vulkan driver"
Reviewed-by: Dave Airlie <airlied@redhat.com>
The nir->llvm conversion was using the wrong srcs.
Fixes:
tests/spec/arb_compute_shader/execution/shared-atomics.shader_test
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Gen4 point clipping calls brw_clip_tri_alloc_regs with nr_verts == 0,
which means that c->reg.vertex[] isn't initialized. It then emits MOVs
to stomp components of those uninitialized registers to 0.
This started causing assertions after Matt's recent series, when those
uninitialized registers started getting BRW_REGISTER_TYPE_NF, which
definitely doesn't exist on Gen4-5.
Reviewed-by: Matt Turner <mattst88@gmail.com>
We need to align the size of the slice, not the offset of the next slice.
Fixes KHR-GLES3.texture_repeat_mode.rgba32ui_11x131_2_clamp_to_edge.
Fixes: b4b4ada761 ("broadcom/vc5: Fix layout of 3D textures.")
Before, we were trusting in the hardware to take the intersection
of the viewport clip with the drawing rectangle. Unfortunately,
3DSTATE_DRAWING_RECTANGLE is fairly expensive because it implicitly
does a full pipeline stall. If we're a bit more careful with our
viewport clipping, we can just re-emit it once at context creation
time.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The delayed loading code was fail if we had control flow.
This fixes:
tests/spec/arb_shader_image_load_store/execution/image_checkerboard.shader_test
v2: don't use temp_reg before setting temp_reg up.
Tested-by: Gert Wollny <gw.fossdev@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Andriy Khulap
Jonathan Gray
Jose Maria Casanova Crespo
Jason Ekstrand
Andres Gomez
Iago Toral Quiroga
Samuel Pitoiset
Alejandro Piñeiro
Mathias Fröhlich
Mark Janes
Dave Airlie
Bas Nieuwenhuizen
Timothy Arceri
Kenneth Graunke
Eric Anholt
Matt Turner