With the Align16 tests now disabled, we can run the rest of the tests in
ICL mode (and see them pass!)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Align16 is no more. We previously generated an align16 ADD instruction
to calculate DDY:
add(16) g25<1>F -g23<4>.xyxyF g23<4>.zwzwF { align16 1H };
Without align16, we now implement it as:
add(4) g25<1>F -g23<0,2,1>F g23.2<0,2,1>F { align1 1N };
add(4) g25.4<1>F -g23.4<0,2,1>F g23.6<0,2,1>F { align1 1N };
add(4) g26<1>F -g24<0,2,1>F g24.2<0,2,1>F { align1 1N };
add(4) g26.4<1>F -g24.4<0,2,1>F g24.6<0,2,1>F { align1 1N };
where only the first two instructions are needed in SIMD8 mode.
Note: an earlier version of the patch implemented this in two
instructions in SIMD16:
add(8) g25<2>F -g23<4,2,0>F g23.2<4,2,0>F { align1 1N };
add(8) g25.1<2>F -g23.1<4,2,0>F g23.3<4,2,0>F { align1 1N };
but I realized that the channel enable bits will not be correct. If we
knew we were under uniform control flow, we could emit only those two
instructions however.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
In a future patch, generate_ddy will want to inspect inst->exec_size.
Change generate_ddx as well for consistency.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The PLN instruction is no more. Its functionality is now implemented
using two MAD instructions with the new native-float type. Instead of
pln(16) r20.0<1>:F r10.4<0;1,0>:F r4.0<8;8,1>:F
we now have
mad(8) acc0<1>:NF r10.7<0;1,0>:F r4.0<8;8,1>:F r10.4<0;1,0>:F
mad(8) r20.0<1>:F acc0<8;8,1>:NF r5.0<8;8,1>:F r10.5<0;1,0>:F
mad(8) acc0<1>:NF r10.7<0;1,0>:F r6.0<8;8,1>:F r10.4<0;1,0>:F
mad(8) r21.0<1>:F acc0<8;8,1>:NF r7.0<8;8,1>:F r10.5<0;1,0>:F
... and in the case of SIMD8 only the first pair of MAD instructions is
used.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
If multiple instructions are emitted, special handling of things like
conditional mod and NoDDClr/NoDDChk need to be performed.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This isn't technically broken, but the next patch will make this
function report whether it generated multiple instructions, and that
information will be used to disable the application of conditional mod
by the generic code.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This new type exposes the additional precision offered by the
accumulator register and will be used in the next patch to implement the
functionality of the PLN instruction using a pair of MAD instructions.
One weird thing to note: align1 ternary instructions may only have an
accumulator in the dst or src1 normally, but when src0's type is :NF
the accumulator is read.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The hardware register types' encodings have changed on Gen11. Good thing
we have that superfluous looking brw_reg_type abstraction lying around!
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Gen11 does not support DF, Q, UQ types in hardware. As a result, we have
to disable some GL extensions until they can be reimplemented.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
anv_gem_set_context_param is to be used directly instead!
Fixes: 6d8ab53303 "anv: implement VK_EXT_global_priority extension"
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Fix clipper validMask setting. We don't need to run frustum rejected
primitives through the clipper. Perform frustum culling with only
frustum clip codes. Guardband clip codes cannot be used because they
overlap frustum codes.
Reviewed-By: Bruce Cherniak <bruce.cherniak@intel.com>
Translate is now part of an overloaded LOAD call which required a change to
the code gen to skip the load functions in order to handle them manually
to make them virtual.
Reviewed-By: Bruce Cherniak <bruce.cherniak@intel.com>
- Have the draw type sent to DrawInfoEvent in handlers created in
archrast.cpp. The draw type no longer needs to be sent during during
AR_API_EVENT() call in api.cpp.
- Remove draw type from event defintions in events_private.proto, no
longer needed
Reviewed-By: Bruce Cherniak <bruce.cherniak@intel.com>
Populate pLastIndex, even for the non-indexed case. An zero pLastIndex
can cause the index offsets inside the fetcher to have non-sensical values
that can be either very large positive or very large negative numbers.
Reviewed-By: Bruce Cherniak <bruce.cherniak@intel.com>
We were setting view to NULL if the iteration was larger than i.
But in fact if the view is NULL the code did nothing anyway...
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
v2: add ANV_CONTEXT_REALTIME_PRIORITY (Chris)
use unreachable with unknown priority (Samuel)
v3: add stubs in gem_stubs.c (Emil)
use priority defines from gen_defines.h
v4: cleanup, add anv_gem_set_context_param (Jason)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (v2)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v2)
Reviewed-by: Emil Velikov <emil.velikov@collabora.com> (v3)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
We now have hopefully fixed all bugs regarding high addresses on Vega10 and
Raven. Start to use the high range to make room for SVM in the low
range.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
According to GLSL ES 3.2 spec, see table in 9.2.1 "Linked Shaders"
section, the precision qualifier should match for uniform variables.
This also applies to previous GLSL ES 3.x specs.
This 'if' checks the condition for uniform variables, while for UBOs
it is checked in link_interface_blocks.cpp.
Fixes: b50b82b8a5
("glsl/es31: precision qualifier doesn't need to match in shader interface block members")
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
v2:
- Add the proper values to gen9+ (Jason)
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Previously we had a check for 1d of narrow 2D textures, however
narrow 2d textures caused gpu hangs, but it was correct for 1d
textures.
This fixes a bunch of 1D image piglits for me.
Fixes: 7b8e1c089d (r600/texture: drop lowering 1d/2d images to linear.)
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From the GLSL 4.60 spec Section 5.9 (Expressions):
"Dividing by zero does not cause an exception but does result in
an unspecified value."
Fixes: 89285e4d47 "nir: add new constant folding infrastructure"
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105271
Ideally the st_finalize_texture call would take care of that, but it
doesn't seem to with KHR-GL45.shader_image_size.advanced-nonMS-*. This
assertion makes sure that no such values are passed to the driver.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This was segfaulting:
dEQP-VK.memory.pipeline_barrier.host_write_index_buffer.1024
Fixes: 8de6f79707 (ac/radeonsi: add load_base_vertex() to the abi)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is never used.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
radeonsi, i965 and anv all treat fdd{x,y} opcodes the same as
fdd{x,y}_coarse by default. The SPIR-V spec lets the implementation
decide how it should be handled and radv was previously going
for the higher quality option. Here we change the shared amd
code to match how nir_op_fdd{x,y} is expected to be handled
by the other NIR drivers.
Fixes piglit test:
./bin/arb_shader_texture_lod-texgrad -auto
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The lowering is incompatible with how the radeonsi backend works.
Fixes piglit test:
./bin/arb_shader_draw_parameters-basevertex vertexid-zerobased -auto
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>