For baremetal CI we are using a 'dummy' rootfs as it is required by
abootimg. This causes NFS boot problems when using u-boot as bootloader.
[ 13.230968] RAMDISK: gzip image found at block 0
[ 13.235645] using deprecated initrd support, will be removed in 2021.
[ 13.243106] List of all partitions:
If we disable CONFIG_BLK_DEV_INITRD nfsroot works.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10024>
They're not warning-clean yet, but we can enable -Werror in general and
just allow the existing types of warnings as exceptions with
-Wno-error=[...]. This way, new warnings of all other types will be
prevented from entering the code base.
Once all warnings of a certain type have been eliminated in a job, the
exception for that type can be dropped from that job. This provides a
realistic path to a fully warning-clean CI build in the future.
v2:
* Use echo -n (Juan A. Suarez)
Reviewed-by: Eric Anholt <eric@anholt.net> # v1
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10220>
This is possible again thanks to
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9955 , and
this MR requires rebuilding all templates based docker images anyway,
so we can pull in the latest templates for free.
We need to exclude /dev/* when unpacking rootfs tarballs for the
arm_test image, since x86 container build jobs do not allow mknod
anymore with current templates. The baremetal test jobs have another
filesystem mounted on /dev anyway.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9833>
Among other things, this gets us GCC 10 (was 6).
Requires some changes to third party components we use:
* Install apitrace (& waffle) from Debian; was hitting issues with the
local build, and it's the same version 9.0 anyway.
* Update Fossilize to a newer commit which builds with GCC 10.
* apt.llvm.org repositories are no longer needed.
* Use an SPIRV-LLVM-Translator commit which builds with LLVM 11.0.1.
* Install XCB packages from Debian, 1.13 fails to build with Python 3.9.
* Install wayland-protocols from Debian, 1.12 is too old for
libgtk-3-dev in bullseye.
LLVM 7/8 packages are no longer available.
Also adapt expected test results to Xvfb now exposing multi-samle
GLXFBConfigs.
v2:
* Install clang instead of clang-11.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/3124
Reviewed-by: Eric Anholt <eric@anholt.net> # v1
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9833>
v2:
- Bump up MESA_ROOTFS_TAG instead of arm_build (Michel)
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10136>
So far we were using a telnet-based script to communicate with the PoE
Switch to turn on/off the network ports the DUTs are connected.
But this script does not seem very reliable because from time to time the
switch fails to execute the steps in the script.
As the PoE Switch we use is a smart one with support for SNMP protocol,
it would be easier to use it to handle it, which allows to turn on/off
the ports without going through the nasty telnet steps
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9954>
libpciaccess-dev:$arch from STABLE_EPHEMERAL down to the main list of packages
in .gitlab-ci/container/cross_build.sh, and bumping the arm_build, i386_build,
ppc64el_build & s390x_build tags again.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Suggested-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
----
.gitlab-ci.yml | 8 ++++----
.gitlab-ci/container/cross_build.sh | 2 +-
2 files changed, 5 insertions(+), 5 deletions(-)
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10095>
This allows to fix some credential leaks and provides compatibility with
the latest LAVA version.
Avoids failures when the LAVA instance returns Error 500
Signed-off-by: Corentin Noël <corentin.noel@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9851>
Works around the other Missing case we've seen in CI, possibly fixes the
underlying issue, and adds support for comments in xfails lists.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9806>
This should make it harder to accidentally introduce formatting issues
into the docs.
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9914>
The merged image contains kernels & rootfs for both arm64 & armhf
baremetal test jobs, and is smaller than either arm{64,hf}_test image
before.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9955>
Doing so in an x86 container via qemu was slow, and started failing
recently after updating to a newer qemu version.
This also results in smaller arm*_test* docker images, since we need to
install fewer Debian packages in them.
As a bonus, this turns some piglit tests from fail to pass (Or maybe
they'll turn out to be flakes? They've passed at least 3 times in a
row).
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9955>
This should catch any build breaks in release mode. iris was already
build tested in debug builds, but not release mode.
Suggested by Michel Dänzer.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9862>
There may be some more elegant way to do things, but the important thing
is that android builds don't have any .pc files we should be using, other
than what our CI generated for zlib.
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9764>
Once the glcpp valgrind test works as intended again, it would delay
the dependent test jobs by ~1-4 minutes.
The meson-clover job would run the glcpp valgrind test multiple times
and take more than 10 minutes to finish.
valgrind can't work in the meson-android job, would need an ARM backend.
v2:
* Disable in meson-clover as well.
Reviewed-by: Dylan Baker <dylan.c.baker@intel.com> # v1
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9528>
Waffle building requires libgl1-mesa-dev to add support for GLX. This
package is pulled automatically in arm64 container as a suggested
package, but no in armhf. Which means we end up having support for GLX
in waffle in arm64 but not in armhf.
Thus let's install explicitly this package to have support in both
cases.
Reviewed-by: Andres Gomez <agomez@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9562>
This adds a piglit runner that we'll be using on freedreno, better
xfail/unexpectedpass handling for some cases (Missing->Pass, Warn->Warn),
better error logging for the Missing issue we've had in CI, a fix for a
source of Missing, and a pile more unit tests.
As a result, we now catch that the Missing results for a bunch of our
tests have gone away.
Reviewed-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9468>
Keep the strace logs in job artifacts for tests which timed out.
This can be useful for figuring out why a timeout occurred.
strace cannot be used in jobs where ASAN is enabled, because ASAN's
leak checker also uses ptrace(), which isn't possible within strace.
Suggested-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9472>
Windows doesn't actually distribute a full TLS CA certificate store, but
pulls them in over time with Windows Update. Try to prime it by manually
pulling the certificates and installing them.
This bumps the Windows tag to force a rebuild.
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9618>
Build deqp-runner with the `--locked` option to use dependencies
versions specified in `Cargo.lock`.
v2: Bump image tags.
Signed-off-by: Antonio Caggiano <antonio.caggiano@collabora.com>
Suggested-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9368>
This allows to split a piglit job in several parallel jobs, to speed up
the execution.
Due piglit restrictions, this only works for single profiles. Otherwise
an error will be shown in the runner.
Also, a new gitlab job variable `PIGLIT_TESTS` is introduced that
contains the excluded/included tests with `-x` or `-n`. The rest of the
piglit options go to `PIGLIT_OPTIONS` (like `--timeout n`).
v2 (Andres):
- Replay profile is supported in parallel jobs.
- Bail out inmediately if parallel jobs is tried with multiple
profiles.
- Use testlist only when doing parallel jobs.
- Do not drop pass tests when filtering executed tests.
- Get rid of PIGLIT_FRACTION.
v4:
- uncommit unrelated change (Andres).
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9022>
On top of the last kernel tree I added a couple of DT changes for db820c
from the qcom landing tree necessary for bringing up the GPU, and a fix to
my OOB cleanups fro cheza. I also enabled the CPU clock driver for db820c
so we can turn on SMP and not leave jobs stranded on a 19Mhz CPU or whatever.
This causes us to need a bit of updating of our TF expectations since the
order of jobs changes a bit.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9144>
The top-level gitlab-ci.yml is big and unwieldy when one wants to work on
CI for a single driver. Move the drivers to separate include files for
ease of finding all your driver's tests, and also to pave the way for work
on a single driver's CI to not retest all other drivers.
Reviewed-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9139>
We have to disable the GLSL unit tests because with asan it runs way too
much code under qemu and times out. Those unit tests have coverage on
x86, anyway.
I also included a vulkan run, which is disabled by default due to timeouts
that I need to sort out still. It should be a useful tool for turnip
devs, though.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9070>
https://github.com/LunarG/gfxreconstruct/issues/328 and
https://github.com/LunarG/gfxreconstruct/issues/402 are already fixed
in the "master" branch.
Updated the piglit version so it supports this version.
Additionally, LunarG's VulkanTools are not built any more since
GFXReconstruct is now able to generate screenshots on its own without
using the VK_LAYER_LUNARG_screenshot layer.
v2:
- Explain the VulkanTools removal in the commit log (Martin).
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9032>
The ".test" template defines a generic artifact location to upload and
the ".piglit-test" a custom one we don't want to get overwritten by
the generic one.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9092>
This add support for the Intel Apollo Lake and Gemini Lake families,
however the job will be disabled by default unless the developer
manually hit play for the iris-apl-traces and iris-glk-traces jobs in
GitLab CI.
These devices are still under experimental level support in
the Lava lab and are not guaranteed to work reliably yet. Once they
become reliable and more resilient we will enable them by default in
MesaCI.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8162>
For now we will start with iris. Our main focus is to enable the devices
to be used in MesaCI.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8162>
For imx6 we need the following fec ethernet fix:
c730ab423bfa ("net: fec: Fix temporary RMII clock reset on link up")
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9046>
Add OpenGL and Vulkan testing for V3D and V3DV respectively.
Add also a couple of manual piglit jobs for V3D.
v2:
- Replace custom mustpass with running fraction of tests (Eric)
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8745>
This new version contains several fixes.
v2:
- Bump lava kernel+rootfs tag (Eric)
v3:
- Drop {x86,arm}_test-base tag bumps (Michel)
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8990>
It's failed for almost a month, so right now it's mostly noise and a
waste of CI resources.
It can easily be re-enabled by an MR which makes it pass again.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8976>
spec@arb_timer_query@timestamp-get seems to fail on D3D12 / Windows
every now and then. Until that's been figured out, let's disable the
test in CI.
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8978>
I cargo-culted these from the llvmpipe tests, but they seem to pass and
not take much time or memory at all, so let's try enabling them. If this
works fine, we might want to try the same for llvmpipe as well...
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8979>
Since gitlab-ci cannot merge artifact lists, and the last entry a job
extends from overwrites the artifact list, we should ensure that we
artifact meson logs via the .ci-deqp-artifacts job.
Signed-off-by: Rohan Garg <rohan.garg@collabora.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8937>
The i965_asm tests are randomly timing out. I've been able to find such
timeouts only on packet runners. This change should have either of these
results:
* The timeouts actually don't happen on gstreamer runners. There will
be no more spurious pipeline failures due to them for the time being,
and we'll know the timeouts are due to some kind of packet runner
specific issue.
* The timeouts happen on gstreamer runners as well. We'll know they're
not caused by a packet runner specific issue.
Win-win.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8966>
The vulkan spec says the following about vkMapMemory:
"ppData is a pointer to a void * variable in which is returned a
host-accessible pointer to the beginning of the mapped range. This
pointer minus offset must be aligned to at least
VkPhysicalDeviceLimits::minMemoryMapAlignment."
So let's report the same value as the gallium-driver reports, otherwise
we'll fail to adhere to the alignment requirement.
This fixes a few Piglit failures for Zink.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/4267
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8965>
In the next commit, we'll start building Zink in the meson-testing step,
and because mega-drivers end up stuffing all dependencies in the same
shared-object, we end up requiring libvulkan for other drivers as well.
So let's no longer track separately who needs vulkan and who doesn't,
and just always install it.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8879>
Fixes the documentation preview link on the MR Overview tab. Found by
comparing with the same thing in weston.
(It still appears only after all jobs in the pipeline have at least
started once though)
Fixes: ae8f9584f4 "CI: always expose docs artifacts"
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8927>
The version overrides leaked into the virglrenderer server, breaking
compiling of all sorts of shaders. We already get GLES3.1 when running
virgl on llvmpipe GL without doing any overrides.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8854>
Using new .incorporate-base-tag+templates-commit & .set-image-base-tag
templates.
This automatically ensures dependent images get rebuilt along with the
base image, no more need to manually bump the dependent image tags.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7988>
Gives us 48 more passed tests, and possibly slightly shorter job times.
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4986>
Gives us 13 more passed tests.
(GALLIVM_PERF=nopt breaks some tests here)
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4986>
Gives us 1 more passed test.
(GALLIVM_PERF=nopt breaks some tests here)
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4986>
To be more consistent and to declutter the .gitlab-ci dir.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Eric Anholt <eric@anholt.net>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8757>
This makes it easier to preview docs changes in merge-requests. Also
make sure we build the docs right away, rather than waiting for when
marge merges. This allows us to see the artifacts right away.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8398>
It seems that recent fixes have made its results stable (other than
existing flakiness in texturegrad), so we can use all the CPUs and a
couple more boards and get more coverage.
Acked-by: Daniel Stone <daniel@fooishbar.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8787>
With the runner fixes, we were down to 2 minutes of boot time and 2
minutes of CTS time for a total of 4 minutes. We've got plenty of time
budget now to increase our coverage.
Acked-by: Daniel Stone <daniel@fooishbar.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8787>
3 commits in 0.5.0:
- 20-40s savings on many of our CI runs by dropping the clever test size
scaling code.
- Even bigger savings (especially on deqp-vk runs) by increasing maximuim
test group size (~1/4 of runtime was spawning deqp on cheza, that cost
is cut by ~75%)
- No more needing to manually set MESA_DEBUG=silent
2 commits in 0.5.1:
- Fixed automatic thread pool sizing to keep all CPUs busy (thanks for
catching that Bas!).
- Automatically size down test groups on short test lists and many CPUs,
so split the list evenly between CPUs (such as on freedreno -options
jobs).
Acked-by: Daniel Stone <daniel@fooishbar.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8787>
The intention was to set it to the commit used for debian.yml, but I
accidentally set it to the ci-fairy.yml commit instead.
v2:
* While we're at it, put two dashes between the base tag and the
ci-templates commit hash, making them easier to tell apart.
v3:
* While we're at it, fix the year of some recently bumped tags.
Fixes: 48f78dfd1a "ci: Define global variable MESA_TEMPLATES_COMMIT
for ci-templates commit"
Reviewed-by: Eric Anholt <eric@anholt.net> # v2
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8690>
We were using surfaceless, which misses out on some useful coverage we'd
like to have in the GLX/EGL piglit tests, but more importantly prevented
many traces from running.
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8727>
We want to be able to test GLX and EGL on real hardware, and we can't do
that with just the surfaceless backend. Bringing up the xserver is pretty
easy.
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8727>
The gitlab artifacts handling has been slow in the past as we hit
gitlab.fdo from multiple runners, and it costs fd.o egress bandwidth. Use
the local http cache against the packet.net minio to cut that downloads
cost.
Closes: #3249
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8727>
This will hopefully give us more information about why some tests are
intermittently timing out.
Only in build jobs using the x86_build docker image for now, since
those are where we're currently seeing most such timeouts. But may
expand this later if it provides the expected benefits.
v2:
* Add comment about why we test for and use /usr/bin/time explicitly.
Acked-by: Eric Engestrom <eric@engestrom.ch> # v1
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8776>
LLVM is moving to the 13 release, but LLVM-SPIRV is still so in the past.
Given that LLVM 12.0.0 is still not out (we are at 12.0.0-rc1 today),
use the `release/12.x` branch for LLVM.
We should also tag LLVM-SPIRV, but... it seems that they haven't caught up
yet, so keep using the master branch, but add a note for a future
committer.
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8740>
The new registry caching in place for registry.fd.o can not handle layers
bigger than 5 GB. The last layer we used to build on windows was 5.2 GB,
meaning that the upload would fail.
Split the layers by calling multiple `RUN`, hoping that the size will be
roughly split between those steps if we have a special layer for VS2019.
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8740>
https://gitlab.freedesktop.org/mesa/mesa/-/jobs/6898838 failed at
uploading the containers but got kicked out right before being able to
give us a valid error.
Bump the timeout for windows container builds, to not have this
unfortunate situation.
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8740>
The dr_mode hack is now folded into the git tree. The uprev brings in a
shrinker fix for msm and a fix for the GPU_SET OOB messages on cheza
(possibly involved in piglit flakes).
Reviewed-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8768>
We haven't been able to stabilize the remaining flakes (scattered through
a bunch of innocuous-looking tests), so disable it until we can fix it or
replace the piglit runner with one that can handle flakes.
Closes: #4170
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8747>
This adds a couple of jobs to execute piglit testsuite in VC4
(quick_shader and quick_gl profiles).
It is defined as a manual test as it takes time to execute them.
v2:
- Add more excluded tests (Eric)
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Acked-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8702>
It fits better with what other drivers has done.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Acked-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8702>
This should help us avoid landing memory leaks (and some buffer overflows)
throughout the GL stack. I put the asan lib in x86_test-base because
we'll want asan for lavapipe, too.
This requires keeping debug symbols for the asan drivers in the artifacts,
as otherwise you can't do much with the backtraces it produces.
Closes: #3726
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8530>
This one test seems to be destroying the world, and causing massive
flakeyness, and is generally more a recovery/GMU stress test than
anything.
See #4159
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8659>
Replace the expect-based script to turn on/off the Raspberry Pi devices
using a python-based script.
v2:
- Fix small nitpicks (Juan)
- Limit line length (Andres)
v3:
- Bump image tags (Eric, Andres)
v4:
- Bump image tags (Eric)
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Acked-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8362>
Disabling process isolation causes a random set of tests to be
spuriously skipped. The set of skipped tests can change when piglit is
rebuilt (even from the same Git commit), which can make docker image
rebuilds painful. (Not to mention the reduced testing coverage due to
the skipped tests)
One downside of this change is that the arm64_a630_piglit_shader job
now takes almost 10 minutes.
v2:
* Change arm64_a530_piglit_shader job as well, but make it run manually
on branches of forked repositories only, since it takes almost 20
minutes now. (Eric Anholt)
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8611>
Pulls in test fixes for rasterpos on softpipe and for
simple-barrier-atomics on freedreno. Note that many xfail-vs-xskips end
up changing, because apparently the
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8499>
This is mostly to get additional -Werror coverage to avoid introducing
unforced ILP32 or big-endian errors. i386 adds lavapipe, r600, nouveau,
zink, and all the classic drivers. ppc64le adds lavapipe and zink, and
also adds -Werror for symmetry with the other cross builds. s390x also
adds lavapipe and zink.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8394>
These bring a whole lot of new coverage to these drivers, since dEQP is
bad at desktop GL feature coverage around early GL 3.x. piglit also gets
at a lot of MSAA, fast clearing, and texture layout issues that dEQP
doesn't do much with.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7370>
I've set it up in the gitlab-runer config on all the freedreno boards.
This means that for piglit, where the run.sh always choose either this
variable or 4 threads otherwise, we'll have the right number of parallel
tasks.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7370>
The .baremetal_test sets DEQP_PARALLEL: 0 (number of CPUs), so existing
DEQP tasks should already be auto-configured. This means we can drop
a530's single-threaded overrides, since it's non-SMP.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7370>
ARM64 had it for traces only, upgrade it to a full build so we can test
a630. We also add it for armhf, as we'll want it on both rpi and etnaviv.
Bumped the LAVA tag as well, since the script changes a bit and it does
impact the final image (even if we aren't pulling in full piglit there
yet). Note I also had to drop the "v" on the tarring of their rootfs, as
the verbosity on baremetal was exceeding job log size.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7370>
We have been advertising 3.1, which waffle has issues creating contexts
for, causing coverage (and performance!) issues in piglit. We should
support all the necessary features already.
Some new failures are caught by the 3.2 CTS, but they look like they're
existing issues simply not covered by the minimal GL 3.0 CTS.
Fixes: #3037
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8255>
It's been regressed a couple of times recently, so let's try to make sure
it doesn't happen again. The setup here is mostly like llvmpipe-quick-gl,
but using quick_gl+quick_shader together, and a few more spectacularly
long-running tests dropped. I also excluded a bunch of unsupported
extensions, to minimize the size of the skip list checked into the tree
(it's still 200k, though).
The unfortunate exclusions in here are fp64 and int64 -- most of the
piglit tests for them don't run because softpipe is still GL3.3, and it's
an egregious number of skips to add to the checked in list.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8068>
I moved QPA-to-XML conversion to the runner, so Mesa CI (and developers!)
don't need to do quite so much in bash. I also made it clean up caselist
.qpa files since nobody ever wants them and we deleted them anyway. This
cleans up a ton of the job log output.
Additionally, I added a subcommend to turn the .csv into a junit output
that we can expose to gitlab. Now, the pipeline's status page will report
the failed testcases, and the "detail" button will give you a link to the
.XML to view for the failure. (We don't report all testcases because it's
too much load for the gitlab server). Note that this will 404 for the
LAVA runners for now, as they don't retain artifacts in gitlab (the plan
is to eventually have them minio upload the artifacts).
This uprev also includes a deqp output parsing fix, resulting in us
catching a couple more failures in some drivers.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8206>
v2:
- Squashed the commit to remove tracie jobs (Eric).
v3:
- Rename *-piglit-traces jobs with *-traces (Eric).
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6388>
v2:
- Rename the ".arm64-deqp-test-vk" template as
".arm64-deqp-test-freedreno-vk" (Eric).
v3:
- Rename the ".arm64-test" template as ".freedreno-test" (Eric).
- Rename the ".arm64-deqp-test" template as
".baremetal-deqp-test" (Eric).
- Rename the ".arm64-deqp-test-freedreno-vk" template as
".baremetal-deqp-test-freedreno-vk".
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6388>
The STRIP_CMD env var is used in several build scripts, not just by
dEQP.
Also, we want to have the rootfs destination directory created so it
also exists for builds that only move directory trees in there.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6388>
Along the way, modify the piglit run script and refactor the way
piglit jobs are generated.
v2:
- Squashed the commit to remove tracie jobs (Eric).
v3:
- Extend information in the comments about the need to use a
running X server for replaying with Vulkan (Tomeu).
- Do actually fail if the upload doesn't work (Tomeu).
v4:
- Rename *-piglit-traces jobs with *-traces.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> [v3]
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6388>
We also need that summary's aggregate command can use JUnit as backend,
a cross-compilation fix for its CMakeList.txt, a fix for the JUnit
backend and a small change in replayer's compare output.
v2:
- Updated the piglit commit so it features another couple of needed
fixes.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com> [v1]
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6388>
v2:
- Update tag for the android_build image (Michel).
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com> [v1]
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6388>
The -S and -B flags were officially introduced in CMake 3.13.
Avoids the following warning:
"
CMake Warning:
No source or binary directory provided. Both will be assumed to be the
same as the current working directory, but note that this warning will
become a fatal error in future CMake releases.
"
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6388>
When introducing/removing these files, it's easy to forget to update the
yml to point to them. Instead of requiring the separate update, just have
the runner script pick the right one from a single per-gpu variable.
As a result, we now pick up the new deqp-lvp-skips.txt that was added but
not conected. This also required moving some bypass flakes from the
shared a630 flakes list to a separate list, which is a feature because now
we'd notice the introduction of flakes to the gmem path.
Fixes: ab79e6b8e3 ("ci: skip failing test on lavapipe")
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8147>
For "0" (its default) deqp-runner picks a number of jobs corresponding to
the CPU count, so set our hardware runners to use that (note that mesa's
deqp-runner.sh will pick a default of 4 if we don't specify a
DEQP_PARALLEL).
This means we'll allocate threads for the slow cores on a630 now, reducing
gles3 runtime from 6.5 minutes to around 5.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8132>
They've been doing so since the webdav results upload was added. This
means that we'll get normal truncated failures lists with the pointer to
the job artifacts, rather than filling a log file if you broke everything.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8132>
I want to enable ASan runs on freedreno. It turns out it's a long road to
get there, starting with making sure we can run our unit tests with the
sanitizer enabled.
While I'm revving this container, add in valgrind too to make sure that
our build paths with valgrind enabled work.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7936>
Now that we've soaked the Windows build in and it's working well,
restrict it to only running on given pipelines, albeit in a somewhat
surprising way.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8053>
The classic OSMesa renders directly into user memory using
src/mesa/swrast, while gallium OSMesa renders using softpipe or llvmpipe
and copies out at glFlush() time. This would make gallium look like a
worse choice for OSMesa, except that swrast is:
1) Painfully slow to render compared to llvmpipe
2) Incorrect at derivatives
3) Limited to GL 2.1 instead of GL 4.6
In my survey of OSMesa users, debian was the remaining holdout with
classic OSMesa in use on hurd and some rare non-LLVM-supported
architectures (sh4, alpha, etc.). As of today, they've switched to
softpipe-based gallium OSMesa for them.
To prevent people from running the wrong OSMesa (to the extent that
running OSMesa can ever be the right thing), delete the classic
version.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Closes: #320Closes: #877Closes: #2297
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/1243>
As it will fail right away if there isn't, and that prevents the CI to
run on people's branches.
$ ci-fairy check-merge-request --require-allow-collaboration --junit-xml=check-merge-request.xml
ERROR: No open merge request against mesa/mesa with sha 9f6aba4be0ceb59d35732651cc44f676e93b70b5
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Fixes: d4151f2e ("ci: Run sanity job only in pre-merge pipelines")
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8032>
This should make more important jobs visible without scrolling on
pipeline pages.
The deploy stage jobs only depend on the sanity job or none at all, so
this has no impact on when the former can run.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7926>
It's more of a nuisance than useful for forked branches.
This means the test-docs job can no longer have a direct dependency on
sanity for forked branches, so split it up into two jobs: one for
pre-merge pipelines, one for forked branches.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7926>
Require libwayland 1.18 and remove the workaround for
WL_SHM_FORMAT_{A,X}BGR16161616F.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7771>
And use it in jobs for images using another Mesa image as their base.
Should fix the build of images which don't use another Mesa image as
their base (by no longer setting the FDO_BASE_IMAGE variable).
Fixes: 0781d9825b "ci: Append $MESA_TEMPLATES_COMMIT to image tags"
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7957>
This fixes the build of images which use another Mesa image as the base.
v2:
* Move $CI_REGISTRY_IMAGE expansion into FDO_BASE_IMAGE assignment as
well (Dave Airlie)
Fixes: 0781d9825b "ci: Append $MESA_TEMPLATES_COMMIT to image tags"
Reported-by: Dave Airlie <airlied@redhat.com>
Acked-by: Eric Anholt <eric@anholt.net> # v1
Reviewed-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7957>
This ensures all images get rebuilt when we update to a newer
ci-templates commit.
v2:
* Append to WINDOWS(_UPSTREAM)_IMAGE instead of WINDOWS_TAG. The latter
failed, apparently variables are not expanded recursively on the
Windows runners.
* Use separate MESA_IMAGE_TAG/MESA_BASE_IMAGE variables instead of
appending to each FDO_DISTRIBUTION_TAG/FDO_BASE_IMAGE separately for
Linux jobs, to prevent accidentally dropping the suffix.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7902>
Since the job which creates the cache tarball starts from the previous
cache, the cache kept accumulating cruft and growing bigger.
This cuts the size of the tarball in half (from almost 600M to under
300M), which can translate to significant time savings when downloading
it on some runners.
v2:
* Use git gc --aggressive (Eric Anholt)
Reviewed-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7920>
This tests OpenGL ES 2.0 CTS suite with VC4 drivers, through baremetal
Raspberry Pi 3 devices.
The devices are connected to a switch that supports Power over Ethernet
(PoE), so the devices can be started/stopped through the switch, and
also to a host that runs the GitLab runner through serial-to-USB cables,
to monitor the devices to know when the testing finishes.
The Raspberries uses a network boot, using NFS and TFTP. For the root
filesystem, they use the one created in the armhf container. For the
kernel/modules case, this is handled externally. Currently it is using
the same kernel/modules that come with the Raspberry Pi OS. In future we
could build them in the same armhf container.
At this moment we only test armhf architecture, as this is the default
one suggested by the Raspberry Pi Foundation. In future we could also
add testing for arm64 architecture.
Finally, for the very rare ocassions where the Raspberry Pi 3 device is
booted but no data is received, it retries the testing for a second
time, powering off and on the device in the process.
v2:
- Remove commit that exists capture devcoredump (Eric)
- Squash remaining commits in one (Andres)
v3:
- Add missing boot timeout check (Juan)
v4:
- Use locks when running the PoE on/off script (Eric)
- Use a timeout for serial read (Eric)
v5:
- Rename stage to "raspberrypi" (Eric)
- Bump up arm64_test tag (Eric)
v6:
- Make serial buffer timeout optional (Juan)
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7628>
To make it easier to differentiate now that llvmpipe & softpipe are
lumped into the same stage.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Acked-by: Eric Anholt <eric@anholt.net>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7873>
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Acked-by: Eric Anholt <eric@anholt.net>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7873>
This is now called 'arm'; even though they're two separate drivers, it
does help cut down on some of the more egregious horizontal scrolling.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Acked-by: Eric Anholt <eric@anholt.net>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7873>
This is now called 'layered-backends'.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Acked-by: Eric Anholt <eric@anholt.net>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7873>
This is now called 'amd'.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Acked-by: Eric Anholt <eric@anholt.net>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7873>
This is now called 'software-renderer'.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Acked-by: Eric Anholt <eric@anholt.net>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7873>
This is now called 'build-misc'.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Acked-by: Eric Anholt <eric@anholt.net>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7873>
The only thing we really need from the git-repo is the piglit_run.ps1
script, so let's upload that into our artifacts instead.
Fixes: d560addc30 ("gitlab-ci: run piglit on windows")
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7867>
This tests the D3D12 driver on Windows during CI, to prevent accidental
breakage.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7857>
GitLab CI doesn't allow us to store artifacts from outside the
build-directory, so let's create an install-directory and install there
instead.
To do this properly, we need to expand a variable inside the
command-line, so we need to change to a double-quoted string.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7857>
Without this, the test-docs job could end up waiting for manual action
after the sanity job failed, which prevented the pipeline as a whole
from having failed status.
(This means the test-docs job will no longer exist in one corner case
where it did before, when pushing directly to a non-master branch of
the main repository. That should be fine, since the docs are only
deployed from master.)
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7676>
This is possible now that it uses the external ci-fairy docker image.
This allows dropping the "check mr" job from needs: of other jobs, the
container stage jobs will only become available once the sanity stage
has passed.
This also allows simplifying the "check mr" job rules and script, since
the job only needs to exist in pre-merge pipelines for MRs anymore.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7676>
Trying this again after reworking the virtualised network setup on the
Windows runner.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7537>
The full end-to-end job now completes in around 45min, which is far more
reasonable than the previous 3.5h.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7537>
We need these builds in Windows in order to build the microsoft-clc
parts.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7537>
We've slowly been pushing -Werror through the set of CI builds, and it
looks like clover is clean at the moment. Keep it that way.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Acked-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7664>
Seems some sort of linux change (bugfix?) resulted in the db410cs
selecting device mode for the db410cs due to the micro cable being
plugged in (fastboot runs them in device mode), so we weren't finding
the network and getting artifacts out.
Closes: #3728
Acked-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6971>
I want the new version to show the fix in the fd-largeconsts branch (and
make sure the pass keeps working, and make sure other drivers get around
to fixing the issue). While I'm here, cherry-pick in the VK test along
with the GLES one, and also the fix for clip_three on ARMs.
Since the VK and GL test lists were changing, I took the opportunity to
reset freedreno xfails lists to just the tests that are being run with the
CTS uprev, and increase its coverage to 1/10th of the CTS across two
boards (since we just freed up a bunch of runtime with the grouped gles
"other" job).
For panfrost, I didn't spend the time characterizing the t720 fragment_ops
flakes like I did for the deqp-runner change. Given that the random
behavior changes between CTS versions, it doesn't seem to be worth the
time to do so.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6971>
To increase our VK coverage on a630, we want to have two jobs in parallel,
but we still can't hit full coverage so we need the fractional setting to
be separate from gitlab CI's flags for setting up parallel jobs.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6971>
This saves the minute and a half boot time on each of these minute-or-less
test jobs. The whole job was 3.5 minutes in my last run.
Acked-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6971>
The recent change to install kernel modules for AMD included a sed job to
disable kernel modules in the defconfig. This somehow broke booting on
a307, except the commit failed to bump the arm64_test tag so it wasn't
noticed until the next uprev. (I didn't notice when landing the next
change to that container to add the deqp runner, because I didn't get a
git conflict on rebasing my tag bump so I didn't bump the tag again to
pull in the kernel changes and catch the fail).
I've spent a while trying to debug what's happened (including what
*should* be a replication of the kernel build on my local db410c) and come
up empty. Just punt and disable the AMD kernel module changes on
baremetal to fix it. Bump every container using lava_build.sh to make
sure we don't screw anything up with the script changes.
Fixes: 60c5729d16 ("ci: Distribute ADMGPU driver to LAVA as a module")
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6971>
I found the C++ runner hard to develop on, and we had stability issues and
outstanding feature needs that made me want something I felt good about
hacking on. Thus, Rewrite It In Rust of the deqp runner.
The new runner includes:
- Skip lists don't reshuffle the test list.
- Known-flake handling without resorting to skip lists (fixing our main CI
reliability issue on a3xx right now).
- Per-thread Vulkan shader caches should speed up VK CI runtime.
- Tracking of crashes separate from fails (so we can see progress on that
front).
- Logging of deqp stderr spam (particularly assertion failures!) in the CI
log.
- Integrated QPA filtering so we don't have bash perf issues for it.
- Logging of what caselist to go look at for a given error report (in red,
so it's easier to find in your CI log).
- The code is 1/3 unit tests, and easy to extend for more coverage.
- Non-LAVA CI runs create a failures.csv in artifacts that you can check
in as your deqp-*-fails.txt file.
- Test runtime is included in results.csv so you can debug how to speed up
your CI job.
- Pretty summary at the end of the run of slow/flaky/failed tests.
Since this is a new runner with a different RNG, the test groups are
shuffled one more time. This seems to result in some panfrost T720
stability issues (See its new deqp-panfrost-t720-flakes.txt), and one new
flake in freedreno a630.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7434>
As it needs firmware to probe, and we cannot bundle it within the kernel
image because it is incompatible with the GPL.
Currently we rebind the driver after boot but that's slow and fragile,
as unloads of DRM drivers aren't generally tested.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7420>
So that if the former fails, build & test jobs won't run, wasting less
time & CI resources.
This requires slight tweaks to the rules: of the former job, to make
sure it always exists when the build jobs do.
Acked-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7278>
These can catch various common issues in MR settings and Git commit
logs.
The "check mr" job only exists in pre-merge pipelines for MRs, and runs
automatically.
The "check commits" job only exists in pre-merge pipelines for MRs and
in pipelines for forked branches. It runs automatically in the former
case and can be manually triggered in the latter.
v2:
* Use git_archive docker image (Daniel Stone)
* Use a single sanity stage for both jobs (Tomeu Vizoso)
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6209>
We put it in the first container stage to prevent it from waiting for
jobs in previous stages, but empty needs: works for that as well.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6209>
I wasted a bunch of time today tracking down a spurious test results
change due to a driver invoking UB by running tests where NIR validation
had failed (instruction reading from components beyond vector size). If
we need to shrink our coverage to get runtimes down, it will still be
better to be catching validation errors in CI.
To keep the test jobs runtime under 10 minutes, I've split a530's gles2 to
two different jobs.
Acked-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7203>
In SDK 25 (Android 7, 2016), the kernel only went up to around 4.4, so
the upstreamed sync API didn't exist, and libsync didn't expose
sync_merge().
In SDK 26 (Android 8, 2017), the kernel is sometimes bumped to 4.9 or
4.14, but libsync has a sync_merge() that operates on either the
downstream or the upstream API.
Since our android-targeting drivers in general use sync objects (requiring
a kernel newer than 7 got) and sync_merge() (suggesting interaction with
external fencing that started in Android 8), make CI build against an SDK
version with the sync API. I think really doing SDK 25 right at this
point would involve backporting mesa with some #ifdefs to not expose sync
APIs that wouldn't work.
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Acked-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6821>
To support Android drivers, we're going to want to be tracking that Mesa's
build succeeds on a real android toolchain. This still uses the android
stubs since these libs aren't in the NDK.
Note that I had to drop the Intel and AMD drivers currently: we don't have
LLVM cross-compiled for Android in this container, and I'm honestly hoping
ACO saves us from that. Intel has dependencies on libexpat, which AOSP
really doesn't want to bring in, and it looks to me like those dependencies
could be optional.
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6700>
This causes a lot of hiccups on the CL tests, but I've got most of
them fixed in another MR in pieces.
This should at least give a much more realistic baseline.
v2: use script in both places
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7073>
This adds support for building clover/llvmpipe and running the
piglit CL tests on it.
It uses the gl testing container, and add builds the libclc
spirv libraries as part of that which requires the llvm spirv
translator in the build container.
It also builds the llvm spirv translator as part of the build
root and creates a mesa build that builds clover for testing
against it. It uses llvm 10 as the baseline.
This drops bswap as it has an oob memory access with llvmpipe
which cause flaky test results. phatk also seems flaky
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6901>
The gles3 and gles31 multisample and 565-no-depth-no-stencil caselists
are also mustpass. And they don't add a significant number of extra
test cases.
The remaining mustpass caselists all involve rotation, which is not
currently supported in the surfaceless deqp build.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6553>
Some compile-time regressions go unnoticed because not all gallium
drivers are compiled as part of the meson-clang job. Let's pass an
explicit list of drivers to compile instead of setting GALLIUM_DRIVERS
to "auto" to increase CI coverage.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6811>
Since pre-merge pipelines run in the "mesa" namespace now, the rule
would have created the job if the source branch was named "master" (and
the job might have updated the public website).
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6566>
They are using a in source tree version of the needed libdrm
functionality or are shipping all needed headers in the source tree.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6672>
I'd like to see this new non-UAPI feature bake in CI. More importantly,
it may prevent some classes of flakes on cheza by isolating the processes
on the GPU so that a fault in one doesn't stomp over memory in another.
I've also pulled in a fix that etnaviv needed for their upcoming CI.
We add a few more kernel options while uprevving:
- More interconnect drivers for getting good GPU perf
- PRNG so that we don't get late-in-boot complaints about randomness.
- db820c's power domains and ethernet so hopefully we can switch to this
upstream kernel
This seems to slightly change the flakes happening in bypass mode, so add
them to the list.
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6592>
Inform gitlab about the JUnit XML file that tracie produces, so that the
pipeline page can present more detailed information about tracie test
results.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6598>
Inform gitlab about the JUnit XML file that tracie produces, so that the
pipeline page can present more detailed information about tracie test
results.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6598>
Only in pre-merge pipelines for MRs, or in pipelines for forked project
branches.
Having the manual job in post-merge pipelines prevented the pages job
from running automatically as well, which could prevent the public
website from getting updated.
Acked-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6534>
There's no need to have separate build scripts here, just choose what the
DEQP_TARGET is for the particular container being built. This brings in a
tremendous number of GLES test fixes that haven't made it into a tagged
gles CTS release.
Closes: #2056
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6526>
The version bump gets us various testcase fixes, mostly to test
requirements). While we're rebuilding the container, copy GL CTS stuff
from build-deqp-gl.sh -- we had already included the glcts binary in our
image, but we had unnecessary other binaries and were missing the mustpass
files (container size stays the same overall). Also pull in all the GLES
mustpass lists, not just the main ones -- Rob wants them to increase our
coverage to match what Android CTS covers.
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6526>
Eric Anholt
Marek Olšák
Christian Gmeiner
Michel Dänzer
Juan A. Suarez Romero
Leo Liu
Chia-I Wu
Corentin Noël
Erik Faye-Lund
Matt Turner
Kenneth Graunke
Lionel Landwerlin
Jose Fonseca
Mike Blumenkrantz
Daniel Stone
Antonio Caggiano
Tapani Pälli
Andres Gomez
Gustavo Padovan
Rohan Garg
Tomeu Vizoso
Benjamin Tissoires
Rob Clark
Adam Jackson
Danylo Piliaiev
Jesse Natalie
Andres Gomez
Dave Airlie
Simon Ser
Samuel Pitoiset
Eric Engestrom
Rhys Perry
Alejandro Piñeiro
Serge Martin
Boris Brezillon
Alexandros Frantzis