Previously we would get a fmov with modifiers, but now that mov has no type
these opcodes need to be supported.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Clark <robdclark@chromium.org>
int_to_float needs to come after bool_to_float, and lower_to_source_mods
needs to come after both, since they don't deal wih source mods.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Not sure how this happened, but apparently all cubemaps need swapped XY.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Clark <robdclark@chromium.org>
This line was mistakenly added while there is already a `-D tools=all`
a few lines below.
Fixes: f60defa72d ("gitlab-ci: Add a shader-db run using v3d on drm-shim.")
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Test-case with depth-clear 0.5 and format
MESA_FORMAT_Z24_UNORM_X8_UINT fails due inconsistent
clear-value of 0.4999997.
Maybe its better to improve?
CC: Jason Ekstrand <jason.ekstrand@intel.com>
Fixes: 0ae9ce0f29 (i965/clear: Quantize the depth clear value based on the format)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111113
Signed-off-by: Sergii Romantsov <sergii.romantsov@globallogic.com>
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The driver should now rely on cmask_offset because CMASK can be
disabled by the driver for some reasons (eg. mipmaps). Apply the
same change for FMASK, although it should be useless.
Fixes: ad1bc8621d ("radv: remove radv_get_image_fmask_info()")
Fixes: 10d08da52c ("radv/gfx10: add missing dcc_tile_swizzle tweak")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
It's unnecessary to duplicate fields in another struct.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
It's unnecessary to duplicate fields in another struct.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
It's 0 for depth surfaces with TC compat HTILE enabled.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
LLVM 9 does not have a 64-bit buffer compswap intrinsic, so this
extracts the ptr, does a bound check and then uses a cmpxchg LLVM
instruction.
Not ideal, but the earliest release we're going to get a proper
intrinsic is LLVM 10.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
>From the EGL_KHR_create_context spec:
"* If OpenGL 3.1 is requested, the context returned may implement
any of the following versions:
* Version 3.1. The GL_ARB_compatibility extension may or may
not be implemented, as determined by the implementation.
* The core profile of version 3.2 or greater."
Fixes CTS tests:
dEQP-EGL.functional.create_context_ext.gl_31.rgb888_depth_stencil
dEQP-EGL.functional.create_context_ext.robust_gl_31.rgb888_depth_stencil
dEQP-EGL.functional.create_context_ext.gl_31.rgb888_depth_no_stencil
dEQP-EGL.functional.create_context_ext.robust_gl_31.rgb888_depth_no_stencil
dEQP-EGL.functional.create_context_ext.gl_31.rgba8888_depth_no_stencil
dEQP-EGL.functional.create_context_ext.gl_31.rgb888_no_depth_no_stencil
dEQP-EGL.functional.create_context_ext.robust_gl_31.rgba8888_depth_no_stencil
dEQP-EGL.functional.create_context_ext.robust_gl_31.rgb888_no_depth_no_stencil
dEQP-EGL.functional.create_context_ext.gl_31.rgba8888_no_depth_no_stencil
dEQP-EGL.functional.create_context_ext.robust_gl_31.rgba8888_no_depth_no_stencil
dEQP-EGL.functional.create_context_ext.gl_31.rgba8888_depth_stencil
dEQP-EGL.functional.create_context_ext.robust_gl_31.rgba8888_depth_stencil
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
When we detect a scalar/vector copy through load_deref/store_deref, we
have to be careful since those can bitcast an int to a float and
vice-versa even though copy_deref can't.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111251
Fixes: 156306e5e6 ("nir/find_array_copies: Handle wildcards and overlapping copies")
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
This makes it cheaper to just change the dynamic offsets with
the same descriptor sets.
This optimization has been reverted a while back because of
random GPU hangs on GFX9, no it looks fine, at least CTS no longer
hangs on GFX9 and it doesn't hang on GFX10 as well.
It fixes a performance problem with Wolfenstein Youngblood.
Suggested-by: Philip Rebohle <philip.rebohle@tu-dortmund.de>
It can be enabled with RADV_PERFTEST=gewave32.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
It can be enabled with RADV_PERFTEST=pswave32.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This exposes the textureSamplesIdenticalEXT function in GLSL.
We enable it for iris and radeonsi, because their compilers already
have support for this. Tested on Intel Kabylake and AMD Vega 64.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Specifically the optimization of a conditional BREAK + WHILE sequence
into a conditional WHILE seems pretty broken. The list of successors
of "earlier_block" (where the conditional BREAK was found) is emptied
and then re-created with the same edges for no apparent reason. On
top of that the list of predecessors of the block immediately after
the WHILE loop is emptied, but only one of the original edges will be
added back, which means that potentially several blocks that still
have it on their list of successors won't be on its list of
predecessors anymore, causing all sorts of hilarity due to the
inconsistency in the control flow graph.
The solution is to remove the code that's removing valid edges from
the CFG. cfg_t::remove_block() will already clean up after itself.
The assert in bblock_t::combine_with() also needs to be removed since
we will be merging a block with multiple children into the first one
of them.
Found the issue on a hardware enabling branch originally, but
apparently somebody reproduced the same problem independently on
master in the meantime.
Fixes: d13bcdb3a9 ("i965/fs: Extend predicated break pass to predicate WHILE.")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111009
Cc: jiradet.jd@gmail.com
Cc: Sergii Romantsov <sergii.romantsov@globallogic.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
Tested-by: Paul Chelombitko <qamonstergl@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The device info initializer makes several fuctions internal:
- handling of device override
- updating topology from kernel information
The implementation file is slightly reordered due to the renamed
functions being static.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Rename the original device info initialization routine so callers
don't mistakenly call the wrong one:
gen_get_device_info_from_fd:
Queries kernel for full device info, including topology
details.
gen_get_device_info_from_pci_id:
Partially initializes device info based on PCI ID lookup, when
the kernel is not available.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
With perf queries, initializing the device info is much more complex
than just getting a PCI ID and calling gen_get_device_info. This commit
adds a new gen_get_device_info_from_fd helper in common code which does
all of the requisite kernel queries to get device info including all of
the topology information.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
When gen_device_info updates the topology in it's initializer, the
kernel queries will fail silently. Iris and anv have minimum
kernel requirements that support the queries. i965 must verify kernel
support before reporting OA metrics.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
i965 links against libdrm for drmIoctl, but anv and iris both
re-implement this routine to avoid the dependency.
intel/dev also needs an ioctl wrapper, so lets share the same
implementation everywhere.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes a hang (and abort) on empty shaders, which you shouldn't have
anyway but better safe than sorry. DCE going on the fritz is no reason
to freeze the system.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Important fields relating to shader state and UBOs are filled out from
this (misnomer) function.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
The path for compute shader compiles resembles the graphic shader
compile path, although it is substantially simpler as we don't need any
shader keying.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
We want this routine to be generic across graphics and compute, so let
the caller deal with the typing.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
We already have helpers for packing invocations (due to its role in
instanced vertex shaders), so we can reuse this drop in for compute
shaders.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Squint at it hard enough and you realize it's the beginning of an
SFBD... I guess...
A compute shader with register spilling would be able to confirm this,
but we would expect to see the first field | 1 and an address splattered
later, setting up TLS.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Jonathan Marek
Eric Engestrom
Sergii Romantsov
Samuel Pitoiset
Bas Nieuwenhuizen
Connor Abbott
Timothy Arceri
Kenneth Graunke
Francisco Jerez
Mark Janes
Alyssa Rosenzweig