Fixes
GTF-GLES3.gtf.GL3Tests.vertex_type_2_10_10_10_rev.vertex_type_2_10_10_10_rev_invalid2,
where we hadn't thrown a GL error as needed in the extension-disabled
case. We want to be exposing the extension anyway.
Our backend needs some sort of vertex position value to emit the scaled
viewport values and such. Fixes potential segfaults in
KHR-GLES3.copy_tex_image_conversions.required.cubemap_negx_cubemap_negx
Some equations of the CNL metrics started to use operators we haven't
defined yet, just add those.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
With the introduction of asymmetric slices in CNL, we cannot rely on
the previous SUBSLICE_MASK getparam to tell userspace what subslices
are available.
We introduce a new uAPI in the kernel driver to report exactly what
part of the GPU are fused and require this to be available on Gen10+.
Prior generations can continue to rely on GETPARAM on older kernels.
This patch is quite a lot of code because we have to support lots of
different kernel versions, ranging from not providing any information
(for Haswell on 4.13 through 4.17), to being able to query through
GETPARAM (for gen8/9 on 4.13 through 4.17), to finally requiring 4.17
for Gen10+.
This change stores topology information in a unified way on
brw_context.topology from the various kernel APIs. And then generates
the appropriate values for the equations from that unified topology.
v2: Move slice/subslice masks fields to gen_device_info (Rafael)
v3: Add a gen_device_info_subslice_available() helper (Lionel)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
There are a couple of ways we can get the fusing information from the
kernel :
- Through DRM_I915_GETPARAM with the SLICE_MASK/SUBSLICE_MASK
parameters
- Through the new DRM_IOCTL_I915_QUERY by requesting the
DRM_I915_QUERY_TOPOLOGY_INFO
The second method is more accurate and also gives us the EUs fusing
masks. It's also a requirement for CNL as this platform has asymetric
subslices and the first method SUBSLICE_MASK value is assumed uniform
across slices.
v2: Change gen_device_info_update_from_masks() to generate topology
and call into gen_device_info_update_from_topology (Lionel/Ken)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Already available with the autotools build.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We want to store values coming from the kernel but as a first step, we
can generate mask values out the numbers already stored in the
gen_device_info masks.
v2: Add a helper to set EU masks (Lionel/Ken)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This will be reused to store values reported by the kernel. The main
use case will be for use as the input values of the metric sets
equations for the INTEL_performance_queries extension. By storing this
information in the gen_device_info we make this non GL specific so
this can be reused by Vulkan if we ever have an equivalent extension.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This reverts commit cb2ddcefa5.
This causes clang to error out building C++ code. The plan is to fix the
build to work with clang, but in the mean time we'll just revert this
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Acked-by: Eric Engestrom <eric@engestrom.ch>
When registring configurations to the kernel for the first time, we
run into an issue where the id number is not properly set (we're using
the wrong variable). As a result when trying to use that id later on,
we get an error.
This issue manifest itself the first time you use frameretrace after
reboot, subsequent runs are fine.
Fixes: 27ee83eaf7 ("i965: perf: add support for userspace configurations")
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Add a new struct kms_sw_plane which delegate a plane and use it
in place of sw_displaytarget. Multiple planes share same underlying
kms_sw_displaytarget.
v2:
- add more check for plane size (Tomasz)
v3:
- split from larger patch (Emil)
v4:
- no change from v3
v5:
- remove mapped field (Tomasz)
v6:
- remove change-id in commit message (Tomasz)
v7:
- add revision history in commit message (Emil)
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Lepton Wu <lepton@chromium.org>
If user calls map twice for kms_sw_displaytarget, the first mapped
buffer could get leaked. Instead of calling mmap every time, just
reuse previous mapping. Since user could map same displaytarget with
different flags, we have to keep two different pointers, one for rw
mapping and one for ro mapping. Also introduce reference count for
mapped buffer so we can unmap them at right time.
v2:
- avoid duplicated mapping and leaked mapping (Tomasz)
v3:
- split from larger patch (Emil)
v4:
- remove munmap from dt_destory (Emil)
v5:
- introduce reference count for mapping (Tomasz)
- add back munmap in dt_destory
v6:
- remove change-id in commit message (Tomasz)
v7:
- remove munmap from dt_destory again (Emil)
- add revision history in commit message (Emil)
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Lepton Wu <lepton@chromium.org>
As the other VC4 files do. Otherwise, it won't find nir_builder.h
v2: add path in source code rather changing autotools (Emil)
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Disabling fast color clear makes fbo-clearmipmap test render correct
texture in base miplevel. Fast color clear is anyways disabled for
non-base miplevels.
Acked-by: Matt Turner <mattst88@gmail.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Rafael ran piglit with the test code enabled and saw no additional GPU
hangs.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
On gen11+ AUX_HIZ is not a supported value for surfaces being
sampled by the 3D sampler.
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We all know the platform names, and I don't want to update this list
continually.
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
commit 03dd9a88b0 introduced per surface
queues, but the display_sync for swrast_commit_backbuffer remained on
the old queue. This is likely to break when dispatching the correct
queue at the top of function (which can't dispatch the sync callback
we're waiting for).
The easiest known reproduction case is running weston-subsurfaces under
weston --use-pixman
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
We're trying to be -Wundef clean so that we can turn it on (and
eventually make it an error).
Note that the OMX code already used `#if ENABLE_ST_OMX_BELLAGIO` instead
of #ifdef; I could've changed these, but the point of -Wundef is to
catch typos, so we might as well make the change the right way.
Fixes: 83d4a5d5ae "st/omx/tizonia: Add H.264 decoder"
Fixes: b2f2236dc5 "st/omx/tizonia: Add H.264 encoder"
Fixes: c62cf1f165 "st/omx/tizonia/h264d: Add EGLImage support"
Cc: Gurkirpal Singh <gurkirpal204@gmail.com>
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
and let's make sure `with_gallium_omx` is never 'auto' and can only be
one of [bellagio, tizonia, disabled].
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
The DriverFlags.NewArray bit is already set to NewDriverState in
_mesa_set_draw_vao since we have actually just above changed the VAOs
content. So this can be removed.
The _vbo_update_inputs is called by the vbo...recalculate_inputs being
set through the same mechanism as described above.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
At the current state, _vbo_update_inputs is called from
the draw callback if vbo...recalculate_inputs is set.
But that is now set of the _DrawVAO or its content or the
vertex program mode is changed.
So remove _vbo_update_inputs from the direct dlist draw path.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Now that setting vbo...recalculate_inputs also sets the
DriverFlags.NewArray bits into the NewDriverState setting that from
vbo_bind_arrays is redundant.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
This flag is now set when the actual Array._DrawVAO changes.
So setting this flag is redundant here.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Since arrays also handle the mapping of current values into the
disabled array slots, we need to tell the array update code that
this mapping has changed. Also mark only dirty if it has changed.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Both mean something very similar and are set at the same time now.
For that vbo module to be set from core mesa, implement a public vbo
module method to set that flag. In the longer term the flag should
vanish in favor of a driver flag of the appropriate driver.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Update the VAO internal state on Array._DrawVAO instead of
Array.VAO. Also the VAO internal state update gets triggered now
by a change of Array._DrawVAO instead of the _NEW_ARRAY state flag.
Also no driver looks at any VAO's NewArrays value from within
the Driver.UpdateState callback. So it should be safe to move
this update into the _mesa_set_draw_vao method.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Factor out that common call into the almost single place.
Remove the _mesa_set_drawing_arrays call from vbo_{exec,save}_draw code
paths as the function is now called through vbo_bind_arrays.
Prepare updating the list of struct gl_vertex_array entries via
calling _vbo_update_inputs for being pushed into those drivers that
finally work on that long list of gl_vertex_array pointers.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Move vbo draw functions into struct dd_function_table.
For now just wrap the underlying vbo functions.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
If view mask has only one bit set, view index is effectively a
constant, so doesn't need to be passed to the next stages, just always
set it.
Part of this was in the original patch that added
anv_nir_lower_multiview.c but disabled.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The view_index is encoded in the remainder of dividing instance id by
the number of views in the view mask (n). In the general case (handled
by the else clause), there is a need to map from 0..n-1 into the
number of the view being masked. For that a map is encoded.
In the case only the first n bits in the mask are set, the mapping is
trivial, 0..n-1 already represent what view is being referred to.
That case was in the original patch that added
anv_nir_lower_multiview.c but disabled.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Eric Anholt
Lionel Landwerlin
Dylan Baker
Lepton Wu
Juan A. Suarez Romero
Matt Turner
Anuj Phogat
Anuj Phogat
Jason Ekstrand
Derek Foreman
Samuel Pitoiset
Eric Engestrom
Mathias Fröhlich
Aaron Watry
Timothy Arceri
Caio Marcelo de Oliveira Filho