The GL side of this extension just provides an accessor via glGetIntegerv for
the value of GL_CONTEXT_RELEASE_BEHAVIOR so it is trivial to implement. There
is a constant on the context for the value of the enum which is initialised to
GL_CONTEXT_RELEASE_BEHAVIOR_FLUSH. The extension is always enabled because it
doesn't need any driver interaction to retrieve the value.
If the value of the enum is anything but FLUSH then _mesa_make_current will
now refrain from calling _mesa_flush. This should only affect drivers that
explicitly change the enum to a non-default value.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The main incentive to do this is to get the defines for the
GL_KHR_context_flush_control extension.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Different platforms require the offset to be in different units. However,
the generator fixes all of this up for us and only requires an offset in
bytes. Previously, we were getting this wrong all over the place. Some
computed/used it correctly as bytes while others treated the offset as
whole registers or computed it as bytes or bytes*2 in SIMD16 mode. This
commit cleans all this up and makes us properly treat it as bytes
everywhere.
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
I thought this would be a clever way to make spilling less expensive.
However, it appears that the oword read/write messages we are using for
spilling ignore the execution size and assume SIMD16 whenever working with
more than one register.
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Fanin (merge) nodes require it's srcs to be "adjacent" in consecutive
scalar registers. Keep track of instruction neighbors in copy-
propagation step and avoid eliminating mov's which would cause an
instruction to need multiple distinct left and/or right neighbors.
This lets us not fall on our face when we encounter things like:
1: MOV TEMP[2], IN[0].xyzw
2: TEX OUT[0].xy, TEMP[2], SAMP[0], SHADOW2D
3: MOV TEMP[2].xy, IN[0].yxzz
4: TEX OUT[0].zw, TEMP[2], SAMP[0], SHADOW2D
5: END
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Always insert extra mov's for the tex coord into the fanin. This
simplifies things a bit, and avoids a scenario where multiple sam
instructions can have mutually exclusive input's to it's fanin, for
example:
1: TEX OUT[0].xy, IN[0].xyxx, SAMP[0], 2D
2: TEX OUT[0].zw, IN[0].yxxx, SAMP[0], 2D
The CP pass can always remove the mov's that are not actually needed,
so better to start out with too many mov's in the front end, than not
enough.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
dscis -> noscis
dbypass -> nobypass
a bit more consistant w/ nobin, etc. And IMO a bit more sensible names.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Kills get added to the outputs list, to ensure they get scheduled. But
they aren't *really* outputs so skip them in the header comment block.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Adding this makes 'make check' catch failures introduced from
within ARB_clip_control.xml earlier.
Signed-off-by: Mathias Froehlich <Mathias.Froehlich@web.de>
In order to test compiler changes more easily, spit out the assembled
shader with some header information so that we can know about
inputs/outputs more easily.
See: git://people.freedesktop.org/~robclark/ir3test
In ir3test we have a big collection of tgsi shaders and reference
ir3_compiler outputs. When making compiler changes, regenerate the
compiler outputs and feed to ir3test to compare the new vs reference
shader.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
The last few dwords were skipped if the total number of dwords was not a
multiple of 4. Change the formatting for better readability.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
We only get here if the VS/GS compiled programs change, but we can even
skip it if the VS/GS size didn't change.
Affects cairo runtime on glamor by -1.26471% +/- 0.674335% (n=234)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Just remove the parameter. Silences:
brw_program.c: In function 'brw_dump_ir':
brw_program.c:566:33: warning: unused parameter 'brw' [-Wunused-parameter]
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Originally I just fixed some unused parameter warnings in this
function. However, Ken pointed out:
"You could instead remove this driver hook. If the dd pointer is
NULL, arbprogram.c will return true. I think I'd prefer that."
Way, way back in time, I think _mesa_GetProgramivARB had the opposite
behavior. Given that it works the way it now works, I also prefer
removing the driver hook.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Just remove the parameter. Silences:
../../src/mesa/main/uniform_query.cpp:1062:1: warning: unused parameter 'ctx' [-Wunused-parameter]
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This fixes some unused parameter warnings introduced by the previous
commit.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Since a couple commits ago, there is only one caller, and that caller is
in the same file.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Silences:
../../src/mesa/main/shaderobj.c: In function '_mesa_init_shader_program':
../../src/mesa/main/shaderobj.c:239:46: warning: unused parameter 'ctx' [-Wunused-parameter]
For now, this adds a couple other unused parameter warnings, but future
patches will clean those up.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
It was identical to the default implementation in _mesa_new_shader.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Cc: Dave Airlie <airlied@redhat.com>
It was identical to the default implementation in
_mesa_new_shader_program.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Cc: Dave Airlie <airlied@redhat.com>
It was identical to the default implementation in
_mesa_new_shader_program.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Just remove the parameter.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
_mesa_link_shader_program already calls _mesa_clear_shader_program_data
before calling link_shaders, so this is already done.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
All of this is already done in link_shaders. More clean-ups coming.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
_mesa_UseShaderProgramEXT, _mesa_ActiveProgramEXT, and
_mesa_CreateShaderProgramEXT were all removed when support for
GL_EXT_separate_shader_objects was removed.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Just remove the parameter. Silences:
../../src/mesa/main/ff_fragment_shader.cpp:668:1: warning: unused parameter 'p' [-Wunused-parameter]
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Fixes many piglit failures on IVB since 85edaa8.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85425
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Cc: Mathias Fröhlich <Mathias.Froehlich@gmx.net>
Previously, we were allowing the register allocation code to do the
computation for us in ra_set_finalize. However, the runtime for this
computation is O(c^4 * g) where c is the number of classes and g is the
number of GRF registers. However, these q-values are directly computable
based on the way we lay out our register classes so there is no need for
the aweful runtime algorithm.
We were doing ok until commit 7210583eb where we bumped the number of
register classes from 11 to 16. While startup times don't normally matter,
this caused piglit to take 4 times as long to run on Bay Trail. This patch
should make generating the ra_set much faster and melt the piglit run
times.
v2: Fixed a couple of bugs. I have now verified that the same q-values are
generated both ways.
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
On older GENs in SIMD16 mode, we were accidentally building too much
interference into our register classes. Since everything is divided by 2,
the reigster allocator thinks we have 64 base registers instead of 128.
The actual GRF mapping still needs to be doubled, but as far as the ra_set
is concerned, we only have 64. We were accidentally adding way too much
interference.
Signed-off-by: Jason Ekstrand <jason.ekstrand@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
For GEN6 SIMD16 mode, we have to 2-align all the registers, so we only have
the even-numbered ones. This means that we have to divide the register
number by 2 when we precolor. This wasn't a problem before because we were
setting up the interference between ra_node registers wrong. This will be
fixed in the next commit.
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This shouldn't be a functional change since reg_belongs_to_class is just a
wrapper around BITSET_TEST. It just makes the code a little easier to
read.
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Gallium should be prepared fine for ARB_clip_control.
So enable this and mention it in the release notes.
v2:
Only enable for drivers announcing the freshly introduced
PIPE_CAP_CLIP_HALFZ capability.
v3:
Use extension enable infrastructure to connect PIPE_CAP_CLIP_HALFZ
with ARB_clip_control.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Froehlich <Mathias.Froehlich@web.de>
In preparation of ARB_clip_control. Let the driver decide if
it supports pipe_rasterizer_state::clip_halfz being set to true.
v3:
Initially enable on ilo.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Froehlich <Mathias.Froehlich@web.de
Restore clip control to the default state if MESA_META_VIEWPORT
or MESA_META_DEPTH_TEST is requested.
v3:
Handle clip control state with MESA_META_TRANSFORM.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Froehlich <Mathias.Froehlich@web.de>
Glenn Kennard
Neil Roberts
Jason Ekstrand
Lionel Landwerlin
Tobias Klausmann
Rob Clark
Mathias Fröhlich
Chia-I Wu
Eric Anholt
Andres Gomez
Ian Romanick
Emil Velikov
José Fonseca