Tomeu discovered that GitLab 12.8 fixed the bug where jobs would
spuriously run even though some of their dependency jobs were skipped.
So we don't need to list indirect dependencies anymore.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5845>
I'm not convinced we'll actually want to use this, and there may be
another enable bit in SP_UNKNOWN_AB00, but it's nice to at least write
this down in case we want to try using it in the future.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5877>
It turns out that this clears CP_LOAD_STATE6 packets, including
disabling any pending loads for SS6_INDIRECT/SS6_BINDLESS (these loads
don't actually happen until the draw itself, and I'm not sure if they
happen if the state is unused by the shader) and marking constants and
UBO descriptors loaded with SS6_DIRECT as invalid. It's used very
differently from HLSQ_UPDATE_CNTL on a4xx from whence the name came, and
unlike on a4xx it's not readable, so this probably doesn't line up with
HLSQ_UPDATE_CNTL on a4xx.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5877>
The buffer was never added to the list of buffers. This might lead to
VM faults and GPU hangs.
Found this by luck.
Fixes: 57e796a12a ("radv: Implement VK_EXT_custom_border_color")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5884>
Map all formats to a valid ifmt. FMT6_10_10_10_2_UNORM_DEST still
doesn't work on the blitter so keep that one on the u_blitter path.
Fixes
dEQP-GLES31.functional.draw_buffers_indexed.random.max_implementation_draw_buffers.*
with FD_MESA_DEBUG=nogmem.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5717>
We didn't know how to write layer id without GS, since that's the only way
to do it through VK/GL, and the blob didn't implement this clear case (and
failed cases where it was absolutely necessary). However now we know how to
set it after some educated guesses and looking at tess/geom traces, so the
GS path can be dropped.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5790>
We only need to emit one set of primitive output registers. This may differ
from the blob, because it seems to try to allow using the same pipeline
with tess/geom enabled/disabled.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5790>
v2. Define new helper function to avoid duplicated a pair of function calls.
v3. Move new helper functions to vk_object.h and call them.
v4. Merge 2 commits to use commomn base object type and struct into one.
Signed-off-by: Hyunjun Ko <zzoon@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5539>
They seem to be sometimes taking a while to boot, which is triggering CI
timeouts. (Possibly tftp server in bad shape?) Cut out non-essential
a630 CI jobs, and reduce the gles3/gles31 jobs to compensate.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5893>
in some cases (e.g., gl_ClipDistance) the nir_variable type doesn't match
the needed destination type, so we can simplify this code to just use
the destination type
fixes spec@glsl-1.10@execution@interpolation@interpolation-none-gl_backcolor-smooth-vertex
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5852>
as in the comment, while we may want to try verifying that discard will be
the last instruction in a block, it's a bit problematic given that other nir
passes we're doing may insert instructions after a discard as part of e.g.,
nir_opt_dead_cf in the process of removing another block
fixes shaders@glsl-fs-discard-04
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5852>
if the last instruction in a loop's body terminates a block, e.g., from
a nested loop with a jump as its final instruction, then no block will
have been started when returning to the original loop, and there's no need
to emit a branch
fixes shaders@glsl-vs-continue-in-switch-in-do-while
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5852>
VK_QUERY_PIPELINE_STATISTIC_INPUT_ASSEMBLY_PRIMITIVES_BIT includes
primitives which won't get drawn due to e.g., not enough vertices emitted
by geometry shader
fixes spec@glsl-1.50@gs-emits-too-few-verts
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5533>
reset can't be performed during a renderpass, so we need to defer that until a
time when we're definitely not in a renderpass, such as when we're starting a
new query or resuming a query
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5533>
inline a query result value to each query object so we can stash the partial
result just before we do a pool reset, which will always happen during the
suspend/resume query mechanism that swaps active queries from a flushed batch
to the next batch
once (or if) the "real" call to fetch query results is called, we can dump the
inlined value into the fetch value and return the full results
fixesmesa/mesa#3000
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5533>
xfb queries allocate vk buffer objects in the underlying driver which
can be deallocated while an xfb query is in-flight if we attempt to
defer it due to the way that gl xfb is translated to vk, so we need to
continue forcing this behavior in that case
for other query types, we can safely defer here until the current batch has
finished rather than block
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5533>
this hooks up query objects to the batches that they're actively running on
(and the related fence) in order to manage the lifetimes of queries more
efficiently by calling vkCmdResetQueryPool only on init and when the query
pool has been completely used up. additionally, this resolves some vk spec
issues related to destroying pools with active queries
note that any time a query pool is completely used up, results are lost,
which is a very slight improvement on the previous abort() that was triggered
in that scenario
ref mesa/mesa#3000
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5533>
Mali (and Vulkan) uses D3D naming conventions for these formats where
Gallium/Mesa uses OpenGL names, but the formats are equivalent. sRGB is
communicated out-of-band on Mali; otherwise, it appears to be a 1:1
mapping.
On supported devices, this exposes GL_EXT_texture_compression_rgtc and
GL_ARB_texture_compression_bptc, so update features.txt
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5856>
Michel Dänzer
Connor Abbott
Serge Martin
Samuel Pitoiset
Kristian H. Kristensen
Jonathan Marek
Eric Anholt
Hyunjun Ko
Rob Clark
Eric Engestrom
Mike Blumenkrantz
Italo Nicola
Alyssa Rosenzweig