The former is the only user of the latter. As such building gbm
without egl makes little to no sense.
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
To avoid unresolved symbols in the DRI modules with earlier commit we
wrapped the innards of dri_kms_init_screen() in a
DRI_TARGET/GALLIUM_SOFTPIPE ifdef.
At the same time we forgot to adds the defines to the st/dri build
systems, breaking kms_swrast and gnome-continuous.
Drop the DRI_TARGET define, we're already in st/DRI.
Reported-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reported-by: Vadim Rutkovsky <vrutkovs@redhat.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Moving LT_INIT after setting completely (AM_)C(XX)FLAGS and LDFLAGS.
LT_INIT needs them as they are expected to be used all along
the compilation when the macro runs its tests to determine among other
things the host type.
For info, see http://www.gnu.org/software/libtool/manual/html_node/LT_005fINIT.html
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50754
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Tested-by: Tapani Palli <lemody@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
We should assert when either the function or the flag pointer
is null or we'll end up with a null reference a few lines later.
Currently unused by mesa thus it has gone unnoticed.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Apps that only want to use core functionality should #include this
header. This version covers everything up to OpenGL 4.5.
Reviewed-by: Matt Turner <mattst88@gmail.com>
We don't actually do them (or even fake them) currently, but it does get
us a bunch of unrelated glean glsl1 tests passing, which previously would
error out due to glean assuming the minimums on a 3D texture that 2 of the
subtests use.
This can be useful for looking at context init setup and texture format
choices, and there's no reason for the silly retval computation we do if
you're not going to have this code (mostly from freedreno) around.
We now use the brw_eu_emit.c code instead.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Everything should be in place to unify code generation between Gen4-7
and Gen8+. We should be able to drop the Gen8 generators at this point.
However, leave them hooked up for a brief moment, for testing and
comparison purposes. Set GEN8=1 to use the old Gen8+ code generator
paths.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Kind of a moot point since we're deleting Gen8 code generation, but
this at least helps make it match the Gen4-7 code. It's probably more
reasonable than using float.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This improves performance in Trine 2 at 1280x720 (windowed) on "Very
High" settings by 30% (in the interactive menu) to 45% (in the forest
by the giant frog) on Haswell GT3e.
It also now generates the same assembly on Gen7 as it does on Gen8,
which always used the sampler for both types.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Matt Turner <mattst88@gmail.com>
I don't see any reason for this to exist.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Matt Turner <mattst88@gmail.com>
According to the documentation, we need to set the source 0 register
type to IMM for flow control instructinos that have both JIP and UIP.
Out of paranoia, just make all flow control instructions use IMM;
there's no benefit to using ARF anyway, and it could trouble that's
difficult to diagnose.
See commit 9584959123, which did the
analogous change in the gen8_generator code.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Matt Turner <mattst88@gmail.com>
We're going to add a Gen8+ case shortly, which would need to duplicate
this code again. Instead, share it.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Matt Turner <mattst88@gmail.com>
When we combine the Gen4-7 and Gen8+ generators, we'll need to handle
half float packing/unpacking functions somehow. The Gen8+ generator
code today just emulates the behavior of the Gen7 F32TO16/F16TO32
instructions, including the align16 mode bugs.
Rather than messing with fs_generator/vec4_generator, I decided to just
emulate the instructions at the brw_eu_emit.c layer.
v2: Change gen >= 7 asserts to gen == 7 (suggested by Chris Forbes).
Fix regressions on Haswell in VS tests due to type assertions.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Broadwell requires the number of vertices written by the geometry shader
to be specified in a separate register, as part of the terminating
message's payload.
This also means GS_OPCODE_THREAD_END needs to increment mlen.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Either should work.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Matt Turner <mattst88@gmail.com>
g0.5 has nothing of value to contribute to m0.5. In both the VS and GS
payload, g0.5 contains the scratch space pointer - which is definitely
not of any use. The GS payload also contains FFTID, but the URB write
message header doesn't want FFTID.
The only reason I used OR was because Eric originally requested it.
On Broadwell, I used MOV, and that's worked out fine.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Matt Turner <mattst88@gmail.com>
On Haswell, we implement "discard" via predicated SEND messages, using
f0.1 instead of f0.0. To accomplish this, we set inst->flag_subreg to 1
on the FS_OPCODE_FB_WRITE.
Most instructions using fs_inst::flag_subreg expand to a single assembly
instruction. However, FS_OPCODE_FB_WRITE can generate several MOVs for
setting up header information. We don't want to set flag_subreg on
those, so override the default state back to 0.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
The link error occurs because the static libraries are linked in the wrong
order. This fixes it.
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82483
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Previously the Meta implementation of glGetTexImage would fall back to
_mesa_get_teximage if the texturing is not using an unsigned normalised
format. However in order to support the half-float formats of BPTC textures we
can make it render to a floating-point renderbuffer instead. This patch makes
decompression_state have two FBOs, one for the GL_RGBA format and one for
GL_RGBA32F. If a floating-point texture is encountered it will try setting up
a floating-point FBO. It will now also check the status of the FBO and fall
back to _mesa_get_teximage if the FBO is not complete.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Enables the BPTC extension on Gen>=7 and adds the necessary format mappings to
get the right surface type value.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Once we add BPTC texture support we will need to generate mipmaps for
compressed floating point textures too. Most of the code seems to already be
there but it just needs a few extra lines to get it to use GL_FLOAT instead of
GL_UNSIGNED_BYTE as the type for the temporary buffers.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This adds compressors for all four of the BPTC compressed-texture formats. The
compressor is written from scratch and takes a very simple approach. It always
uses a single mode of the BPTC format (4 for unorm and 3 for half-floats) and
picks the two endpoints by dividing the texels into those which have more or
less than the average luminance of the block and then calculating an average
color of the texels within each division.
It's probably not really sensible to try to use BPTC compression at runtime
because for example with the Nvidia offline compression tool it can take in
the order of an hour to compress a full-screen image. With that in mind I
don't think it's worth having a proper compressor in Mesa and this approach
gives reasonable results for a usage that is basically a corner case.
v2: Always use the custom compressor, even for the unorm formats. Fix the
quantization step for the half-float format compressor. Fixed a typo which
was breaking the right-hand edge of half-float textures with a width that
isn't a multiple of four.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Adds functions to fetch from any of the four BPTC-compressed formats.
v2: Set the alpha component to 1.0 when fetching from the half-float formats
instead of leaving it uninitialised. Don't linearize the alpha component
when fetching from sRGB.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This adds the following four Mesa image format enums which correspond to the
four BPTC compressed texture formats:
MESA_FORMAT_BPTC_RGBA_UNORM
MESA_FORMAT_BPTC_SRGB_ALPHA_UNORM
MESA_FORMAT_BPTC_RGB_SIGNED_FLOAT
MESA_FORMAT_BPTC_RGB_UNSIGNED_FLOAT
It also updates the format information functions to handle these and the
corresponding GL enums.
v2: Also modify _mesa_get_format_color_encoding, _mesa_get_srgb_format_linear
and _mesa_get_uncompressed_format
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Adds the ‘bptc’ layout to get_channel_bits. The channel bits for BPTC depend
on the mode but as it only has to be an approximation this sets it to 8 for
the two UNORM formats and 16 for the two half-float formats. These represent
the minimum number of bits of variation that can be generated by the
interpolation of the two formats.
This doesn't quite match what we do for S3TC which only returns 4 even though
it can similarly generate 8 bits from the interpolation. However it does match
what we return for ETC2. For reference, NVidia seems to return 8 bits for the
UNORM formats and 32 bits for the half-float formats.
v2: Change the number of bits to 8/8/8/8 for the UNORM formats and 16/16/16
for the half-float formats.
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
If the name of a compressed texture format has ‘FLOAT’ in it it will now set
the data type of the format to GL_FLOAT. This will be needed for the BPTC
half-float formats.
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The signed and unsigned half-float BPTC-compressed formats were being reported
as having a base format of GL_RGBA but they don't store an alpha channel so it
should be GL_RGB.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This adds a boolean in the gl_extensions struct for
GL_ARB_texture_compression_bptc as well as an entry in extension_table.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The initial firmware for hawaii does not support type3 nop packet.
Detect the new hawaii firmware with query RADEON_INFO_ACCEL_WORKING2.
If the returned value is 3, then the new firmware is used.
This patch uses type2 for the old firmware and type3 for the new firmware.
It fixes the cases when the old firmware is used and the user wants to
manually enable acceleration.
The two possible scenarios are:
- the kernel has no support for the new firmware.
- the kernel has support for the new firmware but only the old firmware
is available.
Additionaly this patch disables GPU acceleration on hawaii if the kernel
returns a value < 2. In this case the kernel hasn't the required fixes
for proper acceleration.
v2:
- Fix indentation
- Use private struct radeon_drm_winsys instead of public struct radeon_info
- Rename r600_accel_working2 to accel_working2
v3:
- Use type2 nop packet for returned value < 3
v4:
- Fail to initialize winsys for returned value < 2
Cc: mesa-stable@lists.freedesktop.org
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Marek Olšák <marek.olsak@amd.com>
Cc: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Andreas Boll <andreas.boll.dev@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds a limit to the maximum surface size which is
based on the maximum size of a single mob. If this value is not
available, the maximum surface size is by default set to 128 MB.
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Replace the plain sampler index with a register reference to a sampler.
We also need to keep track of the sampler array size when there is a
relative reference so that we can mark the whole array used.
To facilitate implementation, we add a separate ADDR register that
exclusively handles the sampler relative address. Other approaches would
be more invasive.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Acked-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Emil Velikov
Alexandre Demers
Brian Paul
Eric Anholt
Kenneth Graunke
Jason Ekstrand
Matt Turner
Neil Roberts
Andreas Boll
Charmaine Lee
José Fonseca
Ilia Mirkin