This is necessary for a new Gen9 message type that will be added in the
next patch. There are also Gen8 message types that need the extra bit
(mostly for bindless).
v2: Split off from the next patch. Suggested by Caio.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
v2: Describe interactions with the capabilities added by
SPV_INTEL_shader_atomic_float_minmax
v3: Remove 64-bit float support.
v4: Explain NaN issues. Explain issues with atomicMin(-0, +0) and
atomicMax(-0, +0).
v5: Fix whitespace issues noticed by Caio.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Haven't tested this, but we do include loader.h
in platform_android.c
Fixes: c5ec155685 ("meson: wire up egl/android")
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Since there's no particular reason for the index to be 0, choose an
index that is not used by other block. This is convenient when we
store "per-block" data in an array AND look for the successors
data (e.g. any kind of backwards data-flow analysis).
v2: Add a note about end_block's index. (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Deref paths may share the same deref instructions in their chains,
e.g.
ssa_100 = deref_var A
ssa_101 = deref_struct "array_field" of ssa_100
ssa_102 = deref_array "[1]" of ssa_101
ssa_103 = deref_struct "field_a" of ssa_102
ssa_104 = deref_struct "field_a" of ssa_103
when comparing the two last deref instructions, their paths will share
a common sequence ssa_100, ssa_101, ssa_102. This patch skips to next
iteration if the deref instructions are the same. Path[0] (the var)
is still handled specially, so in the case above, only ssa_101 and
ssa_102 will be skipped.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Without this patch mesa doesn't compile:
In file included from ../mesa-9999/src/amd/addrlib/addrinterface.cpp:39:
../mesa-9999/src/util/macros.h:29:10: fatal error: c99_compat.h: No such file or directory
#include "c99_compat.h"
^~~~~~~~~~~~~~
compilation terminated.
Fixes: 15ca5ce99a
("amd/addrlib: mark returnCode as MAYBE_UNUSED in")
Signed-off-by: Mariusz Ceier <mceier+mesa-dev@gmail.com>
Acked-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Currently if 64bit and 32bit programs are used interchangeably, radv
will keep overwriting the cache. Use separate cache files to avoid
that.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Thanks to reproducible builds, binary file timestamps may be identical
for both 32bit and 64bit packages when built from the same source.
This means radv will use the same cache for both 32 and 64 bit
processes, which leads to crashes.
Conveniently there is a spare byte in cache_uuid, let's place the
pointer size there.
Fixes: f4e499ec79 "radv: add initial non-conformant radv vulkan driver"
CC: 18.1 18.2 <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107601
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105904
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The bsr instruction modifies flags, so that needs to be indicated to the
compiler. No effect on generated code, but still needed for correctness.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Fix rendering issues on BDW and SKL.
Fixes: 0288fe8d04
("i965/miptree: Use the correct BLT pitch")
Fixes the following regressions seen
exclusively on SKL:
* KHR-GL46.texture_barrier_ARB.disjoint-texels
* KHR-GL46.texture_barrier_ARB.overlapping-texels
* KHR-GL46.texture_barrier.disjoint-texels
* KHR-GL46.texture_barrier.overlapping-texels
and both on BDW and SKL:
* GTF-GL46.gtf21.GL2FixedTests.buffer_corners.buffer_corners
* GTF-GL46.gtf21.GL2FixedTests.stencil_plane_corners.stencil_plane_corners
v2: Note the fixed tests (Andres).
Don't cause failures with multisampled buffers (Andres).
Don't hamper SKL GT4 (Ken).
v3: Fix the Fixes tag (Dylan).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107359
Cc: <mesa-stable@lists.freedesktop.org>
Tested-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Check the destination's row pitch against the BLT engine's row pitch
limitation as well.
Fixes: 0288fe8d04
("i965/miptree: Use the correct BLT pitch")
v2: Fix the Fixes tag (Dylan).
Check the destination row pitch (Chris).
Reported-by: Dylan Baker <dylan@pnwbakers.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This struct contains all the data of interest. can_blit_slice() will use
it in the next patch to calculate the correct pitch.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
It looks like we can't rely on the simulator to always translate virtual
addresses to physical ones correctly. So let's use physical everywhere.
Since our current GGTT maps virtual to physical addresses in a 1:1 way,
no further changes are required.
Additionally, we have other address spaces not in use right now. So
let's make it easier to switch which one we are using but putting the
default one into the aub_file struct.
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Hopefully it's a little more descriptive, and more accurate.
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Only used, when asserts are enabled.
Fixes an unused-but-set-variable warning with GCC 8:
../../../src/amd/addrlib/r800/egbaddrlib.cpp: In member function 'virtual long long unsigned int Addr::V1::EgBasedLib::HwlGetSizeAdjustmentMicroTiled(unsigned int, unsigned int, ADDR_SURFACE_FLAGS, unsigned int, unsigned int, unsigned int, unsigned int*, unsigned int*) const':
../../../src/amd/addrlib/r800/egbaddrlib.cpp:4111:13: warning: variable 'physicalSliceSize' set but not used [-Wunused-but-set-variable]
UINT_64 physicalSliceSize;
^~~~~~~~~~~~~~~~~
Signed-off-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Only used, when asserts are enabled.
Fixes an unused-variable warning with GCC 8:
../../../src/amd/addrlib/r800/egbaddrlib.cpp: In member function 'int Addr::V1::EgBasedLib::SanityCheckMacroTiled(ADDR_TILEINFO*) const':
../../../src/amd/addrlib/r800/egbaddrlib.cpp:982:13: warning: unused variable 'numPipes' [-Wunused-variable]
UINT_32 numPipes = HwlGetPipes(pTileInfo);
^~~~~~~~
v2: Don't realign other variable definitions, to keep in line with file
style (Marek)
Signed-off-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Only used, when asserts are enabled.
Fixes an unused-variable warning with GCC 8:
../../../src/amd/addrlib/gfx9/gfx9addrlib.cpp: In member function 'ADDR_E_RETURNCODE Addr::V2::Gfx9Lib::ComputeStereoInfo(const ADDR2_COMPUTE_SURFACE_INFO_INPUT*, ADDR2_COMPUTE_SURFACE_INFO_OUTPUT*, unsigned int*) const':
../../../src/amd/addrlib/gfx9/gfx9addrlib.cpp:3879:34: warning: unused variable 'pEqToCheck' [-Wunused-variable]
const ADDR_EQUATION *pEqToCheck = &m_equationTable[eqIndex];
^~~~~~~~~~
v2: Don't realign other variable definitions, to keep in line with file
style (Marek)
Signed-off-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Only used, when asserts are enabled.
Fixes an unused-but-set-variable warning with GCC 8:
../../../src/amd/addrlib/gfx9/gfx9addrlib.cpp: In member function 'virtual ADDR_E_RETURNCODE Addr::V2::Gfx9Lib::HwlComputeBlock256Equation(AddrResourceType, AddrSwizzleMode, unsigned int, ADDR_EQUATION*) const':
../../../src/amd/addrlib/gfx9/gfx9addrlib.cpp:2473:15: warning: variable 'microBlockDim' set but not used [-Wunused-but-set-variable]
Dim2d microBlockDim = Block256_2d[elementBytesLog2];
^~~~~~~~~~~~~
Signed-off-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Only used, when asserts are enabled.
Fixes an unused-but-set-variable warning with GCC 8:
../../../src/amd/addrlib/addrinterface.cpp: In function 'int ElemGetExportNorm(ADDR_HANDLE, const ELEM_GETEXPORTNORM_INPUT*)':
../../../src/amd/addrlib/addrinterface.cpp:835:23: warning: variable 'returnCode' set but not used [-Wunused-but-set-variable]
ADDR_E_RETURNCODE returnCode = ADDR_OK;
^~~~~~~~~~
Signed-off-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This is available through a "Show URB" button on the 3DPRIMITIVE
instructions.
v2: Fix urb allocation end value in tooltip (Rafael)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
A graphical user interface version of aubinator.
Allows you to :
- simultaneously look at multiple points in the aub file (using all
the goodness of the existing decoding in aubinator)
- edit an aub file
v2: Switch from GLFW to GTK+3
v3: Fix warning when exiting
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Rafael Antognolli <rafael.antognolli@intel.com> (v1)
We want to add a new UI tool to decode aub files. This will use the
Dear ImGui library to render its interface. The build of this UI
toolkit is conditional to -Dwith_tools=intel-ui which superseeds
-Dwith_tools=intel.
The main way to use ImGui is to embed its source code at a particular
revision. Most embedding projects have to do a bit of integration
which is really specific to one's project. In our case the only
modification is to include libepoxy. We also choose to use Gtk+3 for
the window system integration. As oppose to the previous previous
version of this patch using GLFW, Gtk+ is able to handle X11/Wayland
session as well as property DPI scaling on retina monitors.
The import was done at this commit (https://github.com/ocornut/imgui) :
commit 6211f40f3d903dd9df961256e044029c49793aa3
Author: omar <omarcornut@gmail.com>
Date: Fri Jul 27 12:29:33 2018 +0200
Internals: Drag and Drop: default drop preview use a narrower clipping rectangle (no effect here, but other branches uses a narrow clipping rectangle that was too small so this is a fix for it) + Comments
v2: Switch from GLFW to GTK+ (Lionel)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Rafael Antognolli <rafael.antognolli@intel.com>
When we map a PPGTT buffer into a continous address space of aubinator
to be able to inspect it, we currently add it to the list of BOs to
unmap once we're finished. An optimization we can apply it to look up
that list before trying to remap PPGTT buffers again (we already do
this for GGTT buffers).
We need to take some care before doing this because the list also
contains GGTT BOs. As GGTT & PPGTT are 2 different address spaces, we
can have matching addresses in both that point to different physical
locations.
This changes adds a flag on the elements of the list of mapped BOs to
differenciate between GGTT & PPGTT, which allows use to reuse that
list when looking up both address spaces.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
This will allow the aubinator viewer tool to modify the aub data that
was loaded at a particular gtt address.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
This is a patch from me and a patch from Mathieu Bridon squashed
together.
Signed-off-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Mathieu Bridon <bochecha@daitauha.fr>
We are testing the behaviour of a tool, for different input files, each
one using a different newline sequence. ('\n' on UNIX, '\r\n' on
Windows, …)
Unfortunately, when opening a file in text mode, Python 3 will by
default enable the "universal newlines" mode, which means it replaces
all the known newline sequences by '\n'.
This (usually useful) behaviour breaks the tests, which are specifically
trying to handle files with newline sequences different from '\n'.
Disabling the universal newlines mode fixes the tests.
However, to keep the script compatible with both Python 2 and 3, we must
use the io.open() function instead of the open() builtin, as the latter
only knows about the `newline` argument on Python 3.
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Python 3 does not automatically convert from bytes to unicode strings
like Python 2 used to do.
This commit makes sure we pass unicode strings to difflib.unified_diff,
so that the script works on both Python 2 and 3.
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
v2: - explicitly decode the output of subprocesses
- handle bytes and string types consistently rather than relying on
python 2's coercion for bytes and ignoring them in python 3
v3: - explicitly set encode as well as decode
- python 2.7 and 3.x `bytes` instead of defining an alias
Reviewed-by: Mathieu Bridon <bochecha@daitauha.fr>
Ian Romanick
Gurchetan Singh
Caio Marcelo de Oliveira Filho
Mariusz Ceier
Grazvydas Ignotas
Nanley Chery
Rafael Antognolli
Jason Ekstrand
Marek Olšák
Kai Wasserbäch
Lionel Landwerlin
Mathieu Bridon
Dylan Baker
Juan A. Suarez Romero