Various recreation scenarios lead to API thread getting stuck in
swr_fence_finish(). This is a multi-context issue, whereby one context
overwrites the fence read-value with a previous sync's lesser value.
The fence sync value is supposed to be always increasing.
In swr_fence_cb(), only update the "read" value if the new value is
greater.
(This may seem like we're not waiting on the other context to finish, but
had we needed for it to finish there would have been a wait prior to
submitting a new sync.)
cc: mesa-stable@lists.freedesktop.org
Intel's blending hardware does not properly return 1.0 for destination
alpha for RGBX formats; it requires the factors to be overridden to
either zero or one. Broadcom vc4 and v3d also could use this override.
While overriding these factors is safe in general, Nouveau and Radeon
would prefer not to. Their blending hardware already returns correct
values for RGB/RGBX formats, and would like to avoid the resulting
per-buffer blending and independent blend factors (rgb != a) since it
can cause additional overhead.
I considered simply handling this in the driver, but it's not as nice.
pipe_blend_state doesn't have any format information, so we'd need the
hardware blend state to depend on both pipe_blend_state and
pipe_framebuffer_state. Furthermore, Intel GPUs don't have a native
RGBX_SNORM format, so I avoid exposing one, which makes Gallium fall
back to RGBA_SNORM. The pipe_surfaces we get in the driver have an RGBA
format, making it impossible to tell that there shouldn't be an alpha
channel. One could argue that st not handling it in that case is a bug.
To work around this, we'd have to expose RGBX pipe formats, mapped to
RGBA hardware formats, and add format swizzling special cases. All
doable, but it ends up being more code than I'd like.
st_atom_blend already has access to the right information and it's
trivial to accomplish there, so we just add a cap bit and do that.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
`with_gallium_icd` is never used throughout the different Meson build
files, whereas `with_opencl_icd` tracks whether or not `gallium-opencl`
was set to "icd".
Fixes: 42ea0631f1
("meson: build clover")
Signed-off-by: Pierre Moreau <pierre.morrow@free.fr>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Gallium historically has treated pipeline statistics queries as a single
query, PIPE_QUERY_PIPELINE_STATISTICS, which returns a block of 11
values. This was originally patterned after the D3D1x API. Much later,
Brian introduced an OpenGL extension that exposed these counters - but
it exposes 11 separate queries, each of which returns a single value.
Today, st/mesa simply queries all 11 values, and returns a single value.
While pipeline statistics counters aren't typically performance
critical, this is still not a great fit. A D3D1x->GL translator might
request all 11 counters by creating 11 separate GL queries...which
Gallium would map to reads of all 11 values each time, resulting in a
total 121 counter reads. That's not ideal.
This patch adds a new cap, PIPE_CAP_QUERY_PIPELINE_STATISTICS_SINGLE,
and corresponding query type PIPE_QUERY_PIPELINE_STATISTICS_SINGLE.
When calling create_query(), q->index should be set to one of the
PIPE_STAT_QUERY_* enums to select a counter. Unlike the block query,
this returns the value in pipe_query_result::u64 (as it's a single
value) instead of the pipe_query_data_pipeline_statistics group.
We update st/mesa to expose ARB_pipeline_statistics_query if either
capability is set, preferring the new SINGLE variant when available.
Thanks to Roland, Ilia, and Marek for helping me sort this out.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
This just changes the order of the switch statements, so we only
look at target if the query type is PIPE_QUERY_PIPELINE_STATISTICS.
The next commit will introduce a new SINGLE query type which can be
used for the same GL query types, and it won't want this processing.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Gallium handles pipeline statistics queries as a single query
(PIPE_QUERY_PIPELINE_STATISTICS) which returns a struct with 11 values.
Sometimes it's useful to refer to each of those values individually,
rather than as a group. To avoid hardcoding numbers, we define a new
enum for each value. Here, the name and enum value correspond to the
index in the struct pipe_query_data_pipeline_statistics result.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Upstream I'm persuing a more comprehensive solution, but this should
prove a suitable stop-gap measure in the meantime.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109325
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Acked-by: Eric Engestrom <eric@engestrom.ch>
Acked-by: Tapani Pälli <tapani.palli@intel.com>
A simple Vulkan extension that allows apps to query size and
usage of all exposed memory heaps.
The different usage values are not really accurate because
they are per drm-fd, but they should be close enough.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
These functions return nothing.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Looking at -pro we need to enable it for pipelines with just a
GS too.
This seems to reduce the hangs from
https://bugs.freedesktop.org/show_bug.cgi?id=109242 on a RX 550 to
the point where I can't reproduce, after the false start with the
wd_switch_on_eop patch due to flakiness.
(but people are reporting it does not fix the issue completely for
them on polaris 11)
CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
We get a payload for the ivec3 workgroup and an int local invocation
index, and we use the core lowering to turn into the global invocation id
and the local invocation id ivec3s.
This is only exposed on V3D 4.1+, because we didn't have the TMU write
operations for images on 3.3 (To do GLES 3.1 there, you have to lower it
to SSBO load/stores, which is a problem to solve later).
This was an arbitrary "we support lots of stuff" value when I started the
driver. However, at 400 we expose OES_gpu_shader5, which claims support
for dynamically indexing samplers, which the driver doesn't do yet.
We've been relying on linking splitting up our varying matrices into
separate vectors, but with SSO that doesn't happen. Supporting matrix
inputs isn't too hard, though.
Otherwise, the simulator raises the GMP interrupt and waits for it to be
handled, and v3d ends up spinning in v3d_hw_tick(). Aborting right when
violation happens gives us a chance to look at the backtrace of whatever
thread triggered the violation.
Fix crashes with
dEQP-VK.spirv_assembly.instruction.compute.workgroup_memory.*16
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Causes hangs on some machines.
What works for dEQP-VK.tessellation.shader_input_output.barrier:
- running num_patches = 6 (which limits LDS to 32 KiB)
- running num_patches = 8, and artificially cutting LDS size at 32 KiB.
CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
The bug caused that rgb565 framebuffers used argb1555.
Fixes: 433ca3127a
Reviewed-by: Kristian H. Kristensen <hoegsberg@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
From @jekstrand's nir-1-bit-bool branch, with improved ior/inot lowering.
ior: fmax instead of fadd allows removing the fsat.
inot: seq(x, 0) can be better than fsub(1, x). On a2xx, it works better
with the scalar instruction set.
Reviewed-by: Jonathan Marek <jonathan@marek.ca>
Replace calls to create hash tables and sets that use
_mesa_hash_pointer/_mesa_key_pointer_equal with the helpers
_mesa_pointer_hash_table_create() and _mesa_pointer_set_create().
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Eric Engestrom <eric@engestrom.ch>
Replace calls to create hash tables and sets that use
_mesa_hash_pointer/_mesa_key_pointer_equal with the helpers
_mesa_pointer_hash_table_create() and _mesa_pointer_set_create().
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Eric Engestrom <eric@engestrom.ch>
These combinations are common enough and deserve a shortcut.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Eric Engestrom <eric@engestrom.ch>
This function is modeled after the aux_op functions except that it has a
lot more parameters because it deals with two images as well as source
and destination regions.
"&>" is bash specific.
Fixes: e0dbfc9953 ("bin/get-pick-list.sh: warn when commit lists invalid sha")
Cc: Juan A. Suarez <jasuarez@igalia.com>
Cc: Eric Engestrom <eric.engestrom@intel.com>
Cc: Dylan Baker <dylan@pnwbakers.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
"--summary" will also print extended header information such as
creations, renames and mode changes.
Let's just use "--no-patch", which suppresses the diff output.
v2: Use "--no-patch" instead of the "-s" abbreviation (Eric).
Fixes: 559c32d241 ("bin/get-pick-list.sh: simplify git oneline printing")
Cc: Juan A. Suarez <jasuarez@igalia.com>
Cc: Eric Engestrom <eric.engestrom@intel.com>
Cc: Dylan Baker <dylan@pnwbakers.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Function's out variable could be an array dereferenced by an array:
func(v[w[i]]);
or something more complicated.
Copy index in any case.
Fixes: 76c27e47b9 ("glsl: Copy function out to temp if we don't directly ref a variable")
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The original idea was that the backend compiler could eliminate
surfaces, so we would have it mark which ones are actually used,
then shrink the binding table accordingly. Unfortunately, it's a
pretty blunt mechanism - it can only prune things from the end,
not the middle - since we decide the layout before we even start
the backend compiler, and only limit the size. It also basically
gives up if it sees indirect array access.
Besides, we do the vast majority of our surface elimination in NIR
anyway, not the backend - and I don't see that trend changing any
time soon. Vulkan abandoned this plan a long time ago, and I don't
use it in Iris, but it's still been kicking around in i965.
I hacked shader-db to print the binding table size in bytes, and
observed no changes with this patch. So, this code appears to do
nothing useful.
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
DeprecationWarning: the imp module is deprecated in favour of importlib
Instead of complicated logic, just import the file directly.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>