If we don't reset ctx.vm_cnt/gpr_map/etc, this will spam a lot of
s_waitcnt instructions.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17207>
This should allow the compiler to optimize this out because it knows that
cmd_buffer is NULL.
Signed-off-by: Georg Lehmann <dadschoorse@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17166>
Even with a noop FS, the color blend state can still be non-zero, and
then SPI color related registers won't be 0 and this would hang.
Fixes: bdf3797aeb ("ac,radeonsi: don't export null from PS if it has no effect on gfx10+")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17169>
The test was misidentified as a "fail", when it actually has a very
high failure rate (>95%). The test happened to pass twice within the
last week, so let's mark this test as a flake.
Signed-off-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17131>
Fix defect reported by Coverity Scan.
Dereference before null check (REVERSE_INULL)
check_after_deref: Null-checking subpass suggests that it may be null,
but it has already been dereferenced on all paths leading to the check.
Fixes: 779e09639b ("radv: configure DB_Z_INFO.NUM_SAMPLES correctly on GFX11")
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17100>
It's simpler and more efficient.
Signed-off-by: Georg Lehmann <dadschoorse@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Konstantin Seurer <konstantin.seurer@gmail.com>
Reviewed-by: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17127>
The memset below also clears this memory, plus the descriptor set header.
Signed-off-by: Georg Lehmann <dadschoorse@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Konstantin Seurer <konstantin.seurer@gmail.com>
Reviewed-by: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17127>
To avoid dangling BO references if it's destroyed without being
previously unbound. This is under Vulkan spec clarification but it
looks like the "global" BO fix is simple enough to workaround the
issue for now.
This fixes a CPU hang with Halo Infinite because the kernel rejects
a submission (invalid BO handle found).
Cc: mesa-stable
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17085>
If an application binds a sparse resource and then unbind it with NULL,
the number of "real" BOs in the virtual BO list should be reset to 0.
Otherwise, it might use a dangling BO reference if it's destroyed just
after being unbound.
Cc: mesa-stable
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17085>
The machine is extremely slow and fails to finish vkcts, but vkd3d may
still be used as a way to detect extreme regressions.
Signed-off-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17081>
On GFX9 and older, the driver needs to swizzle itself it seems.
Exposing it on GFX10+, allows us to test it with Zink, at least.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17057>
The vkd3d-proton can be very useful, I recently found issues while
implementing VK_EXT_primitives_generated_query and
VK_KHR_fragment_shader_barycentric.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17050>
These are needed to address the task draw and payload ring buffers
when the task shader dispatch is 3 dimensional.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17023>
NV_mesh_shader workgroups are only 1 dimensional, so it's OK to
only add firstTask to the X dimension.
However, let's keep the Y and Z dimensions so this doesn't mess up
the workgroup ID for future 3 dimensional task shader dispatches.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17023>
This allows future mesh shaders to use a 3D workgroup ID.
Also changes how the NV_mesh_shader first_task is emulated.
The new code moves the responsibility from ac_nir into radv.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17023>
This wave ID is used to address the scratch ring, so it should be
enabled when the scratch ring is used.
Note: the naming is confusing here, as this ID is actually the same
accross the whole workgroup. (It would be more appropriate to call
it workgroup ID instead.)
Fixes: 0280b526d5
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17022>
Use radv_graphics_pipeline_info instead of pCreateInfo.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16958>
Use radv_graphics_pipeline_info instead of pCreateInfo.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16958>
Use radv_graphics_pipeline_info instead of pCreateInfo.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16958>
pCreateInfo pointers have to be completely replaced for graphics
pipeline library.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16958>
amdgpu returns 12 TB of GTT on Kaveri, which resulted in 0 KB of GTT
after the conversion to uint32_t, which caused us to report 0 as the UBO
size, which disabled UBOs and downgraded the driver to OpenGL 3.0.
Fixes: aee8ee17a5 - radeonsi: change max TBO/SSBO sizes again and rework max alloc size
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/6642
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16885>
We just need to pass the uses_discard flag to the epilog.
The hw skips the export anyway. This will hang if SPI registers declare
an output format or KILL_ENABLE is set because those cases require
an export with done=1.
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16885>
We need to move tr intrinsics to the top of the
shader that might be overwritten by
nir_intrinsic_rt_trace_ray.
Fixes the Khronos reflection sample.
Signed-off-by: Konstantin Seurer <konstantin.seurer@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16889>
These both exist since Navi and we can have instructions which are one but
not the other.
Signed-off-by: Georg Lehmann <dadschoorse@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16969>
This looks clearer and will avoid confusion with future Zink CI testing.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16943>
Also, stop setting wsi_device::signal_semaphore/fence_with_memory
because those cause the WSI code to call the function we just dropped.
Since the core WSI code is now setting dummy syncs by default, we don't
need any of this anymore.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4037>
Pass all dEQP-VK.transform_feedback.primitives_generated_query.*.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15639>
Streamout must be enabled for the PRIMITIVES_GENERATED query to work.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15639>
When primitives generated query is used, the driver also needs to
emulate counting for NGG VS/TES.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15639>
Different shader variants will be used to not hurt when the features
aren't enabled.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15639>