This is mostly mechanical changes of renaming types and introducing
"legacy" everywhere.
It doesn't use the ac_surface computation functions yet.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Like radeonsi. This saves memory, and the information can easily be
recomputed on the fly where necessary.
Reviewed-by: Dave Airlie <airlied@redhat.com>
For GFX9 these will be needed to be 64-bit, so bump them early,
to avoid it causing any wierdness later.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
In prep for GFX9 refactor some of the eop event writing code
out.
This changes behaviour, but aligns with what radeonsi does,
it does double emits on CIK/VI, whereas previously it only
did this on CIK.
v2: bump the size checks.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This code was in a few places, consolidate into one.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
And correct implementation to specify only what we support.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Bas pointed out the fs key doesn't take srgb into account,
since there is just one srgb variant, just create a separate
pipeline for it. This also uses dest format to be more consistent
on when srgb matters.
Fixes: 69136f4e63 "radv/meta: add resolve pass using fragment/vertex shaders"
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The color clear value is uniform and needs only to be emitted from
the frag shader, so just push it down via a push constant,
and remove the vertex buffer completely.
The depth clear value needs to be emitted from the vertex
shader, but is only a single value.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This drops the resolve workarounds that change an image
tiling mode behinds it's back, this is horrible and breaks
the image_view->image relationship. Remove all this.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
In order to resolve into DCC enabled dests we need to use
the fragment shader. This reuses the code from the compute
path and implements a resolve path in vertex/fragment shader.
This code isn't used until later.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds a path to allow compute resolves to be used
for subpass resolves.
This isn't used yet, but will be later.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
If we are resolving into an srgb dest, we need to convert
to linear so the store does the conversion back.
This should fix some wierdness seen when we subresolves
hit the compute path.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This still doesn't give us complete pWaitDstStageMask support,
but it should provide enough to be correct if not as efficent as
possible.
If we have wait semaphores we must flush between submits and
flush the shaders as well.
This fixes the remaining fails in:
dEQP-VK.synchronization.op.single_queue.semaphore.*ssbo*
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is to rework the surface code like radeonsi.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just makes it easier to do the follow in cleanups of the surface.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Gives me approximately a 2% perf increase in bot dota2 & talos.
Having descriptors (both sets and vertex buffers) prefetched
didn't help so I didn't include that.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
v2: Handle out of pool memory error.
v3: Actually use VK_ERROR_OUT_OF_POOL_MEMORY_KHR for the error condition.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Bas Nieuwenhuizen <basni@google.com>
We want to expose more descriptor sets to the applications,
but currently we have a 1:1 mapping between shader descriptor
sets and 2 user sgprs, limiting us to 4 per stage. This commit
check if we don't have enough user sgprs for the number of
bound sets for this shader, we can ask for them to be indirected.
Two sgprs are then used to point to a buffer or 64-bit pointers
to the number of allocated descriptor sets. All shaders point
to the same buffer.
We can use some user sgprs to inline one or two descriptor sets
in future, but until we have a workload that needs this I don't
think we should spend too much time on it.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This allows meta to use push descriptors without disturbing user
push descriptors.
radv_meta_push_descriptor_set differs from vkCmdPushDescriptorSetKHR
in that partial updates are not supported; all descriptors used in
subsequent draw commands must be pushed at the same time.
Signed-off-by: Fredrik Höglund <fredrik@kde.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
According to the Vulkan spec, VkPipelineInputAssemblyStateCreateInfo's
primitiveRestartEnable flag should only apply to indexed draws, however
it was being enabled regardless of the type of draw. This could cause
problems for non-indexed draws with >=65535 vertices if the previous
indexed draw used 16-bit indices.
Fixes corruption of the credits text in Mad Max.
v2: Reset primitive restart state after executing a secondary command
buffer.
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Makes more sense when we hash the layout for the pipeline cache.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
The devil is in the shader again, otherwise this is
fairly straightforward.
The CTS contains no pipeline statistics copy to buffer
testcases, so I did a basic smoketest.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
For using them with both occlusion and pipeline statistics queries.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Adds a shader for writing occlusion query results to a buffer, as the
CP packet isn't support on SI or secondary buffers, and doesn't handle
the availability bit (or partial results) nor truncation to 32-bit.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
All offsets and strides are precomputed by
radv_CreateDescriptorUpdateTemplateKHR and stored in the template.
v2: Move the new struct declarations from radv_descriptor_set.h
to radv_private.h (Bas)
Signed-off-by: Fredrik Höglund <fredrik@kde.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Move the implementation into a separate function that takes a
cmd_buffer and a dstSetOverride parameter.
When cmd_buffer is not NULL, radv_update_descriptor_sets calls
cs_add_buffer directly instead of updating the buffer list.
This will be used to implement VK_KHR_push_descriptor.
Signed-off-by: Fredrik Höglund <fredrik@kde.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The current code was broken, and I decided to redesign it instead.
This puts the sample positions for all samples into the queue
constant descriptor buffer after all the spill/ring descriptors.
It then uses a single offset register to point how far into the
samples the samples for num_samples are. This saves one user sgpr
and means we only generate the sample position data in the rare
single case where we need it currently.
This doesn't fix the failing CTS tests without the followup
fix.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This calculates the pipeline state for tessellation.
It moves the gs ring calculation down to below
where the tessellation shaders will be compiled,
as it needs the info from those shaders.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This patch adds support for the offchip rings for storing
tessellation factors and attribute data.
It includes the register setup for the TF ring
v2: always do tess ring size calcs (Bas)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Vulkan Clipping is defined in terms of vertices, the scissor based
clipping happens on pixels. There is a difference with points and
lines, as a vertex can be outside the viewport while some pixels are in.
On Vulkan thoise pixels shouldn't be drawn, while they would be with
the guardband.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
With tess this becomes a bit more complex. so move to pipeline
for now.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This also takes the side band setting code from radeonsi.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
There is no need to calculate this on each command submit.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
There is no need to recalculate this every time.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The logic was different than radeonsi, fix it up before adding
tess support.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This reverts commit 2845a108a9.
This break VK-GL-CTS randomly.
./deqp-vk --deqp-case=dEQP-VK.texture.filtering.3d.formats.r4g4b4a4*
bounces around here from 6/6 to 3/6 or 4/6 to hanging.
Signed-off-by: Dave Airlie <airlied@redhat.com>
A buffer descriptor is 16 bytes, not 16 dwords.
Signed-off-by: Fredrik Höglund <fredrik@kde.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Use the same helpers as for other handle<->pointer conversions.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
So that we don't keep allocating BOs for the IBs and upload buffers.
We run some risk of memory increase with e.g. a bimodal size
distribution of command buffers, but I haven't noticed a significant
increase with dota2 and talos.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This adds initial support for NV_dedicated_allocation, then
uses it for the wsi image/memory allocation paths internally
in the driver.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Used only within the generated source file.
Fixes: 12301c5418 ("radv: drop the RADV_CALL macro.")
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Eduardo Lima Mitev <elima@igalia.com>
Fixes: 12301c5418 ("radv: drop the RADV_CALL macro.")
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Eduardo Lima Mitev <elima@igalia.com>
This adds support to radv_GetPhysicalDeviceXlibPresentationSupportKHR
and radv_GetPhysicalDeviceXcbPresentationSupportKHR to check if the
local device file descriptor is compatible with the descriptor
retrieved from the X server via DRI3.
This will stop radv binding to an X server until we have prime
support in place. Hopefully apps use this API before trying
to render things.
v2: drop unneeded function, don't leak memory. (jekstrand)
v3: also check in surface_get_support callback.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just keeps popping up minor problems and regressions we should
revisit in a more sustainable manner later.
This also reverts:
Revert "radv: query cmds should mark a cmd buffer as having draws."
Revert "radv: also fixup event emission to not get culled."
This reverts commit d1640e7932.
This reverts commit 8b47b97215.
This reverts commit b4b19afebe.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This one only keeps allocated memory in the list, and list nodes
in the descriptor sets. Thsi doesn't need messing around with
max_sets, and we get automatic merging of free regions.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
We only use the freed ones after all free space has been used. If
the app only allocates small descriptor sets, we might go over
max_sets before the memory is full.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
CC: <mesa-stable@lists.freedesktop.org>
Fixes: f4e499ec79
This ports the remains of the workarounds from radeonsi for
the non-TESS cases. It should provide equivalent workarounds
for hawaii and bonarie.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This puts the common gfx state for the device into an
indirect buffer, and just calls out to it, on CIK and above.
This is taken from what radeonsi does.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
If a buffer is just full of flushes we flush things on command
buffer submission, so don't bother submitting these.
This will reduce some CPU overhead on dota2, which submits a fair
few command streams that don't end up drawing anything.
v2: reorganise loop to count first then malloc,
rename some vars (Bas)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Works for me on dota2 and talos now.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Andres Rodriguez <andresx7@gmail.com>
The CTS tests at least are using this, and we were totally
ignoring it.
This hopefully fixes the bouncing multisample CTS tests.
v2: get family mask in ignored case from command buffer.
v3: only change things in one place, use logic from Bas.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This uses the scratch infrastructure to handle the esgs
and gsvs rings.
(this replaces the old code that did this with patching).
v2: fix correct ring sizes, reset sizes (Bas)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds gs copy shader support to the pipeline cache, and few
geometry related changes.
v2: rebase for spill changes.
v2.1: fix incorrect pipeline destruction.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Pretty straightforward. Also deleted the big comment block as it
is a pretty standard pattern for filling in arrays.
Also removed the error message on non-existent devices, as getting
7 errors printed to the console each time you enumerate the
devices is pretty confusing.
v2: Add constant for number of DRM devices.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
We only need one per samples (maybe not even that), reduce
all the unneeded ones.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Each physical device may have different extensions than one another.
Furthermore, depending on the software stack, some extensions may not be
accessible.
If an extension is conditional, it can be registered only when
necessary.
v2: removed unused function and fixed indentation
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Queues are independent execution streams. The vulkan spec provides no
ordering guarantees for different queues.
By using a single context for all queues, we are forcing all commands
into an unecessary FIFO ordering.
This change is a preparation step to allow our-of-ordering scheduling of
certain work tasks.
v2: Fix a rebase error with radv_QueueSubmit() and trace_bo
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
These seem unlikely to be used.
Also remove irrelevant comment about SKL.
v2: forgot to rebase on master
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Also changed RADV_SHOW_QUEUES to a no compute queue option. That
would make more sense later when the compute queue is established,
but the transfer queue still experimental.
v2: Don't include the trace flag.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
v2:
- Now use the filename specified by RADV_TRACE_FILE env var.
- Use the same var to enable tracing.
I thought we could as well always set the filename explicitly
instead of having some arbitrary defaults, and at that point
we don't need a separate feature enable.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
(airlied: fixes DOOM hang with compute queue enabled)
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
This is required for having a separate compute queue, we
probably can't use this on GFX queue due to DCC.
v2: Set coord_components = 2 for itoi texture fetch. (Bas)
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Dave Airlie
Nicolai Hähnle
Bas Nieuwenhuizen
Fredrik Höglund
Alex Smith
Timothy Arceri
Grazvydas Ignotas
Emil Velikov
Andres Rodriguez