These functions are defined in EXT_texture_array, which makes no
mention of what shader types they should be allowed in. At the time
EXT_texture_array was introduced, functions ending in "Lod" were
available only in vertex shaders, however this restriction was lifted
in later spec versions and extensions.
We already have the function lod_exists_in_stage() for figuring out
whether functions ending in "Lod" should be available, so just re-use
that.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This gets the VS, GS, and PS all using the same data structure.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Since BRW_MAX_WM_SURFACES is greater than BRW_MAX_VEC4_SURFACES, the
existing array isn't large enough to be used by the WM. Increasing it
will make it possible to share them.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
These are largely based on the similar fields in brw->wm.
v2: Add a better comment than "Scratch buffer".
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Everyone at the Khronos meeting was as surprised that GLSL didn't
already support this as we were. Several vendors said they'd ship it,
but there didn't seem to be enough interest to put in the effort to make
it ARB or KHR.
v2: Fix a couple typos and rename the spec file to
EXT_shader_integer_mix.spec. Suggested by Roland.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
start_instance doesn't affect gl_InstanceID.
There's no piglit test, but it's kinda obvious the code was wrong.
Reviewed-by: Christian König <christian.koenig@amd.com>
The shader is responsible for writing to streamout buffers using
the TBUFFER_STORE_FORMAT_* instructions.
The locations of some input SGPRs and VGPRs are assigned dynamically, because
the input SGPRs controlling streamout are not declared if they are not needed,
decreasing the indices of all following inputs.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
So that the "init" state is always emitted first and not later in draw_vbo.
This fixes streamout where the "init" state, which disables streamout,
was emitted in draw_vbo after streamout was enabled.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
This could happen if set_stream_output_targets is called twice
in a row without a draw call in between.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Paused transform feedback objects may refer to a program other than the
current program. If any active objects refer to a program, LinkProgram
must reject the request to relink.
The code to detect this is ugly since _mesa_HashWalk is awkward to use,
but unfortunately we can't use hash_table_foreach since there's no way
to get at the underlying struct hash_table (and even then, we'd need to
handle locking somehow).
Fixes the last subcase of Piglit's new ARB_transform_feedback2
api-errors test.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This is actually a pretty important error condition: otherwise, you
could set up transform feedback with one program, and resume it with
a program that generates a completely different set of outputs.
Fixes a subcase of Piglit's new ARB_transform_feedback2 api-errors test.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The next few patches will use this for API error checking.
All of the drivers appear to CALLOC_STRUCT transform feedback objects,
so this should be properly NULL initialized on creation.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Fixes a subcase of Piglit's new ARB_transform_feedback2 api-errors test.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Move the code back into the common UVD files since we now
have base structures for R600 and radeonsi.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Fixes FTBFS on kfreebsd-*
Debian GNU/kFreeBSD doesn't provide getprogname() since it uses stdlib.h
from glibc. Instead it provides program_invocation_short_name from glibc.
You can find the same order in src/mesa/drivers/dri/common/xmlconfig.c
Cc: "9.2" <mesa-stable@lists.freedesktop.org>
Tested-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
It was wrong for EXP.y, as we clamped the source before computing the
fractional part, and this opcode should be rarely used, so it's not
worth the hassle.
We used to pass the number of components actually used for the
coordinate (rather than padding, shadow comparitors, and projectors) by
hand, specifying it on every _texture() call.
The new helper function can just compute this, eliminating a lot of
potential mistakes.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
This computes the number of components necessary to address a sampler
based on its dimensionality. It will be useful for texturing built-ins.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
It is planned to ship openSUSE 13.1 with -shared libs.
nouveau.la, nv30.la, nv50.la and nvc0.la are currently LIBADDs in all nouveau
related targets.
This change makes it possible to easily build one shared libnouveau.so which is
then LIBADDed.
Also dlopen will be faster for one library instead of three and build time on
-jX will be reduced.
Whitespace fixes were requested by 'git am'.
Signed-off-by: Johannes Obermayr <johannesobermayr@gmx.de>
Acked-by: Christoph Bumiller <christoph.bumiller@speed.at>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
According to GLSL, the shader may call EndPrimitive() at any point
during its execution, causing the line or triangle strip currently
being output to be terminated and a new strip to be begun.
This is implemented in gen7 hardware by using one control data bit per
vertex, to indicate whether EndPrimitive() was called after that
vertex was emitted.
In order to make this work without sacrificing too much efficiency, we
accumulate 32 control data bits at a time in a GRF. When we have
accumulated 32 bits (or when the shader terminates), we output them to
the appropriate DWORD in the control data header and reset the
accumulator to 0.
We have to take special care to make sure that EndPrimitive() calls
that occur prior to the first vertex have no effect.
Since geometry shaders that output a large number of vertices are
likely to be rare, an optimization kicks in if max_vertices <= 32. In
this case, we know that we can wait until the end of shader execution
before any control data bits need to be output.
I've tried to write the code in such a way that in the future, we can
easily adapt it to output stream ID bits (which are two bits/vertex
instead of one).
Fixes piglit tests "spec/glsl-1.50/glsl-1.50-geometry-end-primitive *".
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This is needed for GS_OPCODE_PREPARE_CHANNEL_MASKS.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Previously, brw_urb_WRITE() would always generate a URB_WRITE_HWORD
message, we always wanted to write data to the URB in pairs of varying
slots or larger (an HWORD is 32 bytes, which is 2 varying slots).
In order to support geometry shader EndPrimitive functionality, we'll
need the ability to write to just a single OWORD (16 byte) slot, since
we'll only be outputting 32 of the control data bits at a time. So
this patch adds a flag that will cause brw_urb_WRITE to generate a
URB_WRITE_OWORD message.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Previously, brw_urb_WRITE() would unconditionally override the channel
masks in the URB_WRITE message to 0xff (indicating that all channels
should be written to the URB).
In order to support geometry shader EndPrimitive functionality, we'll
need the ability to set the channel masks programatically, so that we
can output just 32 of the control data bits at a time. So this patch
adds a flag that will prevent brw_urb_WRITE() from overriding them.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The gen7 geometry shader uses a "control data header" at the beginning
of the output URB entry to store either
(a) flag bits (1 bit/vertex) indicating whether EndPrimitive() was
called after each vertex, or
(b) stream ID bits (2 bits/vertex) indicating which stream each vertex
should be sent to (when multiple transform feedback streams are in
use).
Fortunately, OpenGL only requires separate streams to be supported
when the output type is points, and EndPrimitive() only has an effect
when the output type is line_strip or triangle_strip, so it's not a
problem that these two uses of the control data header are mutually
exclusive.
This patch modifies do_vec4_gs_prog() to determine the correct
hardware settings for configuring the control data header, and
modifies upload_gs_state() to propagate these settings to the
hardware.
In addition, it modifies do_vec4_gs_prog() to ensure that the output
URB entry is large enough to contain both the output vertices *and*
the control data header.
Finally, it modifies vec4_gs_visitor so that it accounts for the size
of the control data header when computing the offset within the URB
where output vertex data should be stored.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
v2: Fixed incorrect handling of IVB/HSW differences.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This information will be useful in the i965 back end, since we can
save some compilation effort if we know from the outset that the
shader never calls EndPrimitive().
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
v2: Do not attempt to share the code that uploads
3DSTATE_BINDING_TABLE_POINTERS_GS, 3DSTATE_SAMPLER_STATE_POINTERS_GS,
or 3DSTATE_GS with VS.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
v3: Add _NEW_TRANSFORM to gen7_gs_state.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This will allow us to reuse some code when setting up the geometry
shader stage.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Mesa provides the wayland-egl libs and the pkgconfig file, but the headers
originate from the wayland package. Ensure everything matches, by requiring
application builds to look at the wayland headers as well.
Signed-off-by: Torsten Duwe <duwe@suse.de>
Signed-off-by: Johannes Obermayr <johannesobermayr@gmx.de>
Commit b77316ad75
st/dri: always copy new DRI front and back buffers to corresponding MSAA buffers
introduced creating a pipe_context for every call to validate, which is not required
because the callers have a context anyway.
Only exception is egl_g3d_create_pbuffer_from_client_buffer, can someone test if it
still works with NULL passed as context for validate? From examining the code I
believe it does, but I didn't thoroughly test it.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: 9.2 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
We've observed GPU hangs on Ivybridge from the following instruction:
mov(8) g115<1>.F 0D { align16 WE_normal NoDDChk 1Q };
There should be no reason to ever set the writemask on a destination
register to zero, except for perhaps the ARF NULL register.
This patch adds an assertion to enforce this for non-ARF registers.
Excluding ARFs is conservative yet should still catch the majority
of mistakes.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Otherwise, coordinates with four components would result in a MOV
with a destination writemask that has no channels enabled:
mov(8) g115<1>.F 0D { align16 WE_normal NoDDChk 1Q };
At best, this is stupid: we emit code that shouldn't do anything.
Worse, it apparently causes GPU hangs (observable with Chris's
textureGather test on CubeArrays.)
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <idr@freedesktop.org>
Cc: mesa-stable@lists.freedesktop.org
We can easily compute these without loops, resulting in simpler and
shorter code.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Suggested-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
This was originally introduced by commit
ba47aabc98, but unfortunately the commit message
doesn't go into much detail about why +INF would be a problem here.
A similar issue exists for STATE_FOG_PARAMS_OPTIMIZED, but allowing infinity
there would potentially introduce NaNs where they shouldn't exist, depending
on the values of fog end and the fog coord. Since STATE_FOG_PARAMS_OPTIMIZED
is only used for fixed function (including ARB_fragment_program with fog
option), and the calculation there probably isn't very stable to begin with
when fog start and end are close together, it seems best to just leave it
alone.
This fixes piglit glsl-fs-fogscale, and a couple of Wine D3D tests. No piglit
regressions on Cayman.
Signed-off-by: Henri Verbeet <hverbeet@gmail.com>
Tested-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Paul Berry
Kenneth Graunke
Ian Romanick
Marek Olšák
Christian König
Andreas Boll
José Fonseca
Johannes Obermayr
Torsten Duwe
Maarten Lankhorst
Matt Turner
Henri Verbeet
Vinson Lee