Fix different use cases for transform feedback by setting:
- PIPE_CAP_PACKED_STREAM_OUTPUT=0
- PIPE_CAP_VIEWPORT_TRANSFORM_LOWERED=1
- PIPE_CAP_PSIZ_CLAMPED=1
This is enough for all dEQP xfb-related test cases to run
successfully.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> (Update dEQP expectations)
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2433>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2433>
Now that we have 7 (soon 8) boards available, there's capacity to be
testing GLES 3.0. However, due to (it looks like) buffer overflows in the
driver, we end up with flaky test results: 1/60 jobs spuriously failed,
and another 6/60 jobs reported flakes. At 6 jobs per pipeline, that's way
too high of a failure rate to enable for non-freedreno developers. Leave
the job present but disabled so that we can do manual test runs for
regressions.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3661>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3661>
This should get us better stability of the db410c boards by having a
smaller per-board software stack, with no disks involved (just initramfs).
Additionally, the new cluster is 7 (soon 8) db410cs, while currently the
docker cluster only has 1/4 of its db410cs still running.
Unfortunately, we have to prepare the fastboot boot image during the ARM
drivers build stage, because LAVA relies on publicly available URLs for
the images to load into the bootloaders of the boards, and the only thing
we have for that is gitlab's artifacts.
Note that this testing relies on the boards being freshly flashed with the
linaro v136 firmware to pick up the initramfs size fixes and to stop the
boot at fastboot.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3661>
I'm working on moving the db410c CI from docker to LAVA, which means we
get to boot a custom kernel. To do that, we need to enable ARCH_QCOM in
the kernel, save the dtb around, and include abootimg in our container so
that we can generate combined kernel/dtb/ramdisk images for fastboot.
LAVA's fastboot support is unable to pack the overlay into an abootimg
image, just a cpio rootfs. We could flash the cpio rootfs after overlay
addition, but that takes 2 minutes to do, and causes wear on the devices.
Instead, we'll bring up the network at boot and use wget to fetch the
overlay. We'll want network support anyway, so that we can transfer the
failure xmls back to the gitlab job's artifacts at some point.
Since the msm GPU and realtek network firmware increase our payload by
3MB, add in firmware compression so that it doesn't waste as much RAM on
devices not using it.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3928>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3928>
No sense building some of these subsystems for just testing the GPU.
Saves some container rebuild time and kernel contents to move around.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3928>
The LLVM libraries were a significant fraction of the entire payload
(55M/250M uncompressed) into the initramfs of the test boards, but
LLVM is only used for the draw module used in select/feedback (which
isn't even tested in CI on ARM yet).
Assume that llvmpipe draw is safe enough for ARM given the coverage on
x86, and disable LLVM for these jobs.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3928>
We can drop now the GLES version overrides now that we have a DEBUG flag
that enables all what is expected from a GLES 3.0 implementation.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3950>
We are able to run only 1/5th of the tests in around the same time that
dEQP-GLES2 takes, so do that for now while more DUTs are installed.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3876>
We disabled presentation a while back because it's so expensive for gitlab
to parse it on the other side. We may have a use for it some day if
gitlab gets better, but for now let's not spend the time processing it.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3883>
When bringing up a new board or starting a new GLES version, we have a lot
of unexpected fails to document, so we need the full list in the log (not
just deqp-runner.sh's head -n 50) so we can populate the xfail list.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3883>
LAVA finds a '#' early in boot and races to emit its shell commands.
Apparently for the current boards those serial commands end up getting
buffered such that things work out, but for db410c and db820c, the buffer
is lost and LAVA gets stuck waiting for the prompt. By setting a prompt,
we can delay our commands until we're actually supposed to emit them (and
suppress a complaint from the lava dispatcher that we're using a risky
prompt!)
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3883>
Introduce automated testing of Mesa by replaying traces with Renderdoc
or Apitrace.
For now only LLVMPipe is tested, but other drivers can be tested if
there's runners with the necessary hardware.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2935>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2935>
Some dEQP tests have started passing and it's taking a while to update
the expectations and skips list.
Disable for now so CI doesn't fail and stuff can be merged.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2935>
clear info is needed when submit flush and may be changed after
framebuffer switch, so we need to move it into submit.
This also fixes 5 dEQP tests as a side effect: clear info is per
submit so clear value when one submit won't affect next submit.
v2:
remove fixed dEQP test from CI list.
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3755>
On a daily basis I've been having to restart people's a630 jobs in the
front couple of pages of /merge_requests due to spurious failures from our
flaky tests, and fielding reports of spurious fails from other developers,
and babysitting my own marge merges that are failing due to our flakes.
Nobody should have to deal with that, especially not non-freedreno
developers, so just scrape the list of flakes reported to #freedreno-ci
for the last month and ban those tests that have failed more than once
until we have a credible fix.
Acked-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3662>
Using LLVM 8 for ppc64el and 7 for s390x (which hits some coroutine
related issues with LLVM 8).
There are some test failures we need to ignore for now. Also, the
timeout needs to be bumped from the default 30s for some tests, because
they can take longer under emulation.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3643>
The motivation for this is that we want to make use of the meson cross
files in this script, which have the ccache compiler paths.
We need to remove the ccache directory at the end, it would just waste
space in the image for no benefit.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3643>
The ssa doesn't need to be manually added to block->comp->reg_list.
Doing so actually causes other registers to be marked as undef=true
later.
This patch alone fixes a few deqp tests that have undefs.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3502>
nir can output writes to dead registers when expanding vec4 operations
to non-ssa registers. In that case, some components of the vec4 may be
assigned but never read. These are also not currently removed by a nir
dead code elimination pass as they are not ssa.
In order to prevent regalloc from allocating a live register for this
operation, an interference must be assigned to it during liveness
analysis.
This workaround may be removed in the future if the assignments to dead
components can be removed earlier in ppir or nir.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3502>
This is not always ->rgbBits, because there are cases where that could
be 32 but we're (legally) bound to a depth-24 pixmap. The important
thing to have match here is the actual server-side notion of depth. You
can look this up (at modest expense) from the xlib visual info if the
fbconfig has a visual. But it might not, so if not, fetch it (at
slightly greater expense) from XGetGeometry. Do this at GLX drawable
creation so you don't have to do it on the SwapBuffers path.
Apparently this fixes glx/glx-swap-singlebuffer, which is unintentional
but quite pleasant.
Fixes: mesa/mesa#2291
Fixes: 90d58286 ("drisw: Fix and simplify drawable setup")
Reviewed-by: Eric Anholt <eric@anholt.net>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3305>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3305>
Amend fails and skips lists basing on lists from Andreas Baierl,
shard mali400 job across two devices since it takes close to 10min
and rename jobs to lima-mali400-test and lima-mali450-test.
Also don't set MESA_GLES_VERSION_OVERRIDE=3.0 for lima since we don't support
GLES 3.0 and lower DEQP_PARALLEL to 3 for jobs on H3.
Keep mali400 jobs disabled atm since they take too much time to complete
and we also get some unexplicable failures in dEQP-GLES2.functional.default_vertex_attrib.*
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3163>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3163>
deqp-runner.sh uses it to determine whether we split job across multiple
devices and if we do what's the node index.
With this change we now can set 'parallel: N' in job description if we want
to split the job.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3163>
Use the normal build job to also prepare the artifacts for LAVA jobs.
For that, the build container needs to also build the test suites,
kernel, ramdisk, etc.
Then the build job will place the just-built Mesa in the ramdisk and the
test job can generate a LAVA job and point to those artifacts.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3295>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3295>
They're not available for Debian buster yet, so we have to use upstream
snapshot packages again.
In contrast to earlier, we now store the LLVM APT repository key in Git
instead of re-downloading it every time.
Take one step towards sharing code between the LAVA and non-LAVA jobs,
with the goals of reducing maintenance burden and use of computational
resources.
The env var DEQP_NO_SAVE_RESULTS allows us to skip the procesing of the
XML result files, which can take a long time and is not useful in the
LAVA case as we are not uploading artifacts anywhere at the moment.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
I'm honestly unsure what this is for, but it's needed on MFBD systems
for unknown reasons, at least when MRT is actually in use and then
sometimes without MRT (it fixes a blend shader issue on T760?)
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Visoso <tomeu.vizoso@collabora.com>
I feel really bad about this but this one test is flaking. I don't want
to do a mass revert (and bisection is extremely difficult with
nondeterministic/Heisenbugs), but it's Friday night and master needs to
pass. This commit should be reverted asap (once the flake is solved)
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
We'll need this so we can allocate a stack for the batch large enough
for all the jobs within it.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Only Polaris10 is tested at the moment, and I disabled a TON of
tests to keep a CTS run within 5 minutes because my local runner
is a bit slow. A full CTS run takes more than 1h, which means it
will hit the timeout.
RADV CI can only be triggered manually on personal branches to
avoid breaking the world because one runner is definitely not
enough. This will allow us to test it until it's stable enough
to be enabled by default.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
This requires to bump LLVM to 8 because it's the minimum supported
version by RADV.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Having different policies could have some weird results, e.g. changes
only touching documentation (where the intention is not to run the
pipeline by default) would still create a pipeline with the LAVA jobs
running by default.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
If the runner has a HW device that would be supported, even without
/dev/dri forwarded into the container, it will be enumerated and the tests
on llvmpipe fail with (for example):
libEGL warning: Not allowed to force software rendering when API explicitly selects a hardware device.
libEGL warning: MESA-LOADER: failed to open i965 (search paths /builds/anholt/mesa/install/lib/dri)
Given that we can't necessarily control the DRI devices present on the
runners (particularly for developers bringing their own runners to reduce
the demands on fd.o's shared resources), just skip these tests in CI.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Commit also updates the Piglit quick_gl.txt, list modifications happened
due to following Piglit commits: c248bf201,c acff58ca, 5603e2e60.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
And only use --process-isolation false for the quick_gl tests.
This will hopefully avoid variance in the test results that we've been
seeing lately. But even if it doesn't, it should at least help narrow
down the cause of the variance.
Tested-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Now that the Mali T720 GPU is supoprted at the same level as the T760,
test it on PINE64 H64 boards.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
During the past months, Panfrost has matured considerably and several
tests stopped being flaky or failing at all.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
This will make it easier to look at details of failed / skipped tests.
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Since we're not reporting test results as JUnit anymore, we can use the
default JSON format.
This affects how test results are summarized, update the reference files
accordingly.
Reviewed-by: Eric Anholt <eric@anholt.net>
This fails a couple of piglits due to other bugs in llvmpipe,
but it adds support for the feature properly.
v2: don't reset pipestats, just recalc, fix CI expectation
If the repo continues development, we don't want to accidentally pick
up potentially breaking changes on our next container rebuild.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
xfb + lines/points still flakes too frequently (and the problem isn't
even related to xfb), but we can add the rest back into this mix now.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Extract .qpa for the individual unexpected results and flakes, and
translate to xml, preserved with the artifacts. This allows easy
browsing of the test logs for fails/flakes, for easier debugging.
The # of logs to preserve is capped at 50 to avoid saving 100s of
megabytes of logs in case someone pushes a change that breaks
everything.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
To pick up updated cts_runner and netcat for the flake reporting.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
If there are a small number of fails, re-run to determine if they are
flakes, and optionally (if `$FLAKES_CHANNEL` configured) report the
flakes.
This way flakes don't interfere with developers working on other
drivers, but get logged so that the developers working on the flaking
driver can monitor the situation.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
Bump cts_runner to pick up the change to preserve .qpa and caselist .txt
files for blocks of tests that contain fails, and preserve the caselist
files. To reproduce fails that depend on order of running tests, these
are useful.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
The log only shows the first 50, but preserve the full list for easier
browsing.
(Also move return of exit code to end which makes later patches in the
series easier)
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
Update the deqp build to preserve testlog-to-xml and stylesheets, so
deqp runner can extract .qpa for failed/flaked tests, and convert to
xml. With this, will be able to browse output from failed tests
directly from the artifacts.
The main motiviation is to give better visibility into what happens with
flaked tests, when it is difficult/impossible to reproduce the flake
locally (ie. when it happens once out of N million tests). But this
should also make it easier to debug regressions that a MR triggers,
especially when it is on hw that you don't have.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
We don't seem to fault any more when running dEQP GLES2, and we don't
scrape serial output any more anyway so no problems should be caused by
that.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Always enabled; this doesn't require any driver work, it's just
core mesa bits.
quick_gl.txt is also updated because previously piglit ext_dsa
tests were skipped.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Two benefits:
Most docker image related environment variables can now be defined in
the jobs where they're used instead of globally. The DEBIAN_TAG values
are propagated to other jobs via YAML anchors.
Images on https://gitlab.freedesktop.org/mesa/mesa/container_registry
are now organized in separate repositories with a suffix matching the
name of the job which makes sure the image is there.
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Cleans up .gitlab-ci/ a little, and allows using a single DEBIAN_EXEC
line for all container jobs.
v2:
* Use lava_arm.sh instead of arm_lava.sh for consistency with v2 of the
previous change
Reviewed-by: Eric Anholt <eric@anholt.net> # v1
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
This makes it easier to tell which job is which in a pipeline.
v2:
* Use lava_arm{64,hf} instead of arm{64,hf}_lava to keep these jobs
together in pipeline overviews
Reviewed-by: Eric Anholt <eric@anholt.net> # v1
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Otherwise there can be weird breakage.
(Removing the include from .gitlab-ci/lava-gitlab-ci.yml doesn't seem
possible unfortunately:
https://gitlab.freedesktop.org/daenzer/mesa/pipelines/79458)
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Per the spec, the units passed to glPolygonOffset are to be multiplied
by an implementation-defined constant.
On Midgard, this constant seems to be 2.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
This is less complicated than previously thought. Note we have no way of
specifying the work register count for blend shaders; it must be
strictly less than the work register count of the corresponding fragment
shader (which is fine since we force the fragment shader to report a
count of 16 with a blend shader as a major hack until we get register
pressure down for blend shaders).
TODO: pandecode the flags.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
RADV requires libdrm-2.4.100 but the distrib package is too old.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Now that we're not using so many job slots, it's easy to get these
jobs run in a reasonable amount of time (gles3 took 10 minutes for 4
cores, and gles31 was 15 minutes for 4 cores).
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
This runner is a little project by Bas, written in C++, that spawns
threads that then loop grabbing chunks of the (randomly shuffled but
consistently so) test list and hand it to a dEQP instance. As the
remaining list gets shorter, so do the chunks, so hopefully the
threads all complete effectively at once. It also handles restarting
after crashes automatically. I've extended the runner a bit to do
what I was doing in the bash scripts before, like the skip list and
expected failures handling. This project should also be a good
baseline for extending to handle retesting of intermittent failures.
By switching to it, we can have the swrast tests just take up one job
slot on the shared runners and keep their allotment of CPUs busy,
instead of taking up job slots with single-threaded dEQP jobs. It
will also let us (eventually, once I reprovision) switch the freedreno
runners over to threading within the job instead of running concurrent
jobs, so that memory scribbles in one pipeline don't affect unrelated
pipelines, and I can experiment with their parallelism (particularly
on a306 where we are frequently backed up) without trashing other
people's jobs.
What we lose in this process is per-test output in the log (not a big
loss, I think, since we summarize fails at the end and reducing log
length keeps chrome from choking on our logs so badly). We also drop
the renderer sanity checking, since it's not saving qpa files for us
to go poke through. Given that all the drivers involved have fail
lists, if we got the wrong renderer somehow, we'd get a job failure
anyway.
v2: Rebase on droppong of the autoscale cluster and the arm64
build/test split. Use a script to deduplicate the cts-runner
build.
v3: Rebase on the amd64 build/test container split.
Acked-by: Daniel Stone <daniels@collabora.com> (v1)
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> (v2)
The bash scripts were using grep in the manner that matches any subset
of the line, but the new CTS runner matches the whole line and I think
that's a pretty good behavior. Given that some of the skip lists
already were written to match the full test name, just make them
consistently do so.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
This helps cut down our container build time. I've left a few that
we're likely to rev more frequently or I was less confident in
dropping.
v2: Rebase on the build/test container split, now bumps the build
container tag in this commit.
Acked-by: Eric Engestrom <eric.engestrom@intel.com> (v1)
Acked-by: Daniel Stone <daniels@collabora.com> (v1)
Autotools was deprecated for a while and has now been removed, so let's
start using meson here so that we won't have any issues next time we
update libdrm.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Same as was done for the ARM images before.
This should make it less painful to update to newer dEQP / piglit as
well as to make changes to the build/test environment.
Reviewed-by: Eric Anholt <eric@anholt.net>
One job for the quick_gl profile, one for the glslparser & quick_shader
profiles (doing these together takes hardly any more time than
quick_shader alone).
v2:
* Don't break lava tests
v3:
* Remove piglit test artifacts paths:
* Exclude some quick_shader tests again:
- Test whose result flips between pass/fail/skip
- *@vs_in tests, as not the same one of these gets picked every time
v4:
* Do not list passing tests in .gitlab-ci/piglit/*.txt (Eric Anholt)
* Include the test number summary in .gitlab-ci/piglit/*.txt
* Completely disable generating any vs_in tests in the piglit build.
* Remove some more unneded files from the piglit build tree.
* Exclude quick_gl arb_gpu_shader5 tests; they were all skipped anyway,
as llvmpipe doesn't support this extension yet, but occasionally they
would spuriously fail instead.
v5:
* Set LD_LIBRARY_PATH, so we actually test the Mesa build from the
pipeline...
* Verify that wflinfo reports the expected Mesa version
* Pass -noreset to Xvfb
v6:
* Don't use autoscale runners, run piglit with -j4 (Eric Anholt)
Reviewed-by: Eric Anholt <eric@anholt.net>
It's currently only needed for the meson-main and meson-arm64 jobs, not
the other meson build jobs.
Also remove MESON_SHADERDB, just run .gitlab-ci/run-shader-db.sh
directly from the meson-main job.
v2:
* Also run prepare-artifacts.sh in meson-arm64 script
v3:
* Move tarball creation into the new script as well, as it prevented
ccache --show-stats from running in after_script
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com> # v1
Reviewed-by: Eric Anholt <eric@anholt.net>
By default, ninja tries to saturate all cores of the runner host
machine, which could overload it due to other jobs running in parallel.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This reverts commit c9df92bf79.
It turns out that gitlab-runner uses kubernetes all wrong, spawning Pods
and sshing into them to run the script instead of Jobs containing the
script to run. This means that when anything goes wrong with the pod
(autoscale, preemption, VM maintenance, cluster reconfiguration), the job
fails and only sometimes gets handled as a runner system failure. Even
worse, due to bugs in either the runner or k8s itself, some classes of
timeout-related failure end up not being reported as failures, and the job
will incorrectly report success!
Disable using the "autoscale" cluster until we can do something else
(docker-machine instead of k8s, or the custom third-party k8s-native
runner).
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Acked-by: Daniel Stone <daniels@collabora.com>
The image used for test jobs is only about 1/6 as big as before, which
may help avoid some issues with some of the test boards.
Inspired by https://gitlab.freedesktop.org/mesa/mesa/issues/2046 .
v2:
* Leave LIBDRM_VERSION at 2.4.99 (Daniel Stone)
* Delete more build artifacts from dEQP tree (Daniel Stone)
v3:
* Set LD_LIBRARY_PATH for ldd
Acked-by: Daniel Stone <daniels@collabora.com> # v2
Reviewed-by: Eric Anholt <eric@anholt.net> # Except for the ldd line
GP handles gl_PointSize similar to gl_Position, i.e. it needs
separate buffer and it has special type in varying descriptors, also
for indexed draw we need to emit special PLBU command to pass
address of gl_PointSize buffer.
Blob also clamps gl_PointSize to 1 .. 100 (as well as line width),
so let's do the same.
Reviewed-by: Andreas Baierl <ichgeh@imkreisrum.de>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Run only jobs needed for testing on LAVA devices if a branch starts with
lava-ci-.
This allows developers to have faster test cycles as these pipelines
take only a bit above 8 minutes. Also has the advantage of conserving
resources.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
MALI_DEPTH_TEST should only be set when depth->writemask is true,
not when the depth test is enabled. Let's rename the flag and patch
panfrost_bind_depth_stencil_state() to do the right thing.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Clearly we do want to have fp16 at some point ... but I kind of give up
debugging and it turns out the issues with fp16 support in 'frost are so
deeply rooted that I might as well disable this non-opt and land
LCRA now.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Rather than having hw-specific swizzles encoded directly in the
instructions, have a unified swizzle arary so we can manipulate swizzles
generically.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
The GKE pool we're using is 1-3 32-core VMs, preemptible (to keep
costs down), with 8 jobs concurrent per system. We have plenty of
memory (4G/core), so we run make -j8 to try to keep the cores busy even
when one job is in a single-threaded step (docker image download, git
clone, artifacts processing, etc.) When all jobs are generating work
for all the cores, they'll be scheduled fairly.
The nodes in the pool have 300GB boot disks (over-provisioned in space
to provide enough iops and throughput) mounted to /ccache, and
CACHE_DIR set pointing to them. This means that once a new
autoscaled-up node has run some jobs, it should have a hot ccache from
then on (instead of having to rely on the docker container cache
having our ccache laying around and not getting wiped out by some
other fd.o job). Local SSDs would provide higher performance, but
unfortunately are not supported with the cluster autoscaler.
For now, the softpipe/llvmpipe test runs are still on the shared
runners, until I can get them ported onto Bas's runner so they can be
parallelized in a single job.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
The runner that submits jobs there is down and will turn some time to
get fixed. Disable them for now to keep the CI green.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Commit 9edcce2a32 bumped the required libdrm-amdgpu version to
2.4.100. Update the version we use in our CI scripts to avoid CI
build failures.
Also bump the debian image name for this change to take effect.
Note that amdgpu is only built with the debian-buster image,
so only this image requires an update.
Fixes: 9edcce2a ("ac: get tcc_harvested from the kernel")
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Andres Gomez
Eric Anholt
Louis-Francis Ratté-Boulianne
Daniel Stone
Andreas Baierl
Ilia Mirkin
Dave Airlie
Tomeu Vizoso
Alyssa Rosenzweig
Roland Scheidegger
Alexandros Frantzis
Qiang Yu
Michel Dänzer
Rhys Perry
Kristian H. Kristensen
Erico Nunes
Adam Jackson
Matt Turner
Neil Armstrong
Vasily Khoruzhick
Rob Clark
Rohan Garg
Samuel Pitoiset
Tapani Pälli
Timothy Arceri
Pierre-Eric Pelloux-Prayer
Eric Engestrom
Boris Brezillon
Arno Messiaen
Erik Faye-Lund