v2: rebased on top of subpass rework.
v3: rebased
v4:
- rebased
- reset pending clear views in one go rather one bit at a time (Caio)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
When multiview is active a subpass clear may only clear a subset of the
attachment layers. Other subpasses in the same render pass may also
clear too and we want to honor those clears as well, however, we need to
ensure that we only clear a layer once, on the first subpass that uses
a particular layer (view) of a given attachment.
This means that when we check if a subpass attachment needs to be cleared
we need to check if all the layers used by that subpass (as indicated by
its view_mask) have already been cleared in previous subpasses or not, in
which case, we must clear any pending layers used by the subpass, and only
those pending.
v2:
- track pending clear views in the attachment state (Jason)
- rebased on top of fast-clear rework.
v3:
- rebased on top of subpass rework.
v4: rebased.
v5 (Caio):
- Rebased.
- Initialize pending clear views to only have bits set for layers
that exist.
- Reset pending clear views in one go rather one bit at a time.
- Put "last subpass for this attachment" condition in a separate
function to simplify the conditional that resets pending_clear_aspects.
Fixes:
dEQP-VK.multiview.readback_implicit_clear.*
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
For now we skip SI && HAVE_LLVM < 0x0600 for simplicity. We also skip
setting the more accurate masks for builtin uniforms for now as it
causes some piglit regressions.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This will be shared by the TGSI and NIR backends. For simplicity
we leave the SI LLVM 5.0 and lower work around only in the TGSI
backend.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Buffers can be large, so we probably don't want to make them all 32x
bigger. But they can't be rendered to (at least in GL) so we don't
need this workaround to prevent page faults on mem<->gmem.
Cc: "18.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
We could alternatively fall back to using "old style" draw's for
mem<->gmem (ie. what <= a4xx do) when height is not aligned to 32,
but that is somewhat more work (and not really something that could
be applied to stable)
Cc: "18.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Fixes an issue that became possible when we started lowering phi webs to
regs (a7ea2b4e) (although was not really seen until we also switched to
using peephole select pass (ec8bc54a) instead of lowering *all* if/else
to select).
If texture coord (or anything else that uses create_collect() to collect
scalar values in a sequence of scalar registers) was consuming a value
produced on either side of an if/else (ie. a phi lowered to nir reg,
which in ir3 is an "array" of length 1) then register allocation would
happen incorrectly and we'd end up sampling from garbage coordinates.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Some instructions require src/dst to be in full or half precision
register depending on src/dst type. So do a better job of propagating
register type.
Signed-off-by: Rob Clark <robdclark@gmail.com>
We'll also need to be able to create a half-precision immediate. So
re-work create_immed(). Prep work for following patch.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Previously false-dependencies would get flagged as used, even if the
only "use" was a false dep to (for example) prevent a load from being
scheduled after a store.
In addition to being pointless instructions, in some cases they can
cause problems. For example, ldg (and similar instructions) depend on
an immed arg getting CP'd into the instruction, but this doesn't happen
if an instruction is otherwise unused. Which can result in undefined
results (overwriting unintended registers).
Signed-off-by: Rob Clark <robdclark@gmail.com>
Use DOT2ADDv instruction with 0.0f constant add.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Extend translate_sge_slt to emit these, in analogous fashion
but using CNDEv.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Add support for:
- PIPE_FORMAT_ETC1_RGB8
- PIPE_FORMAT_DXT1_RGB
- PIPE_FORMAT_DXT1_RGBA
- PIPE_FORMAT_DXT3_RGBA
- PIPE_FORMAT_DXT5_RGBA
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Denormalized texture coordinates are required for text rendering in
GALLIUM_HUD.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Textures will sometimes be updated if texture view state was
un-set, without this change that causes an assertion crash or
segfault.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Compose swizzles using util_format_compose_swizzles instead
of the custom code (which somehow had a bug).
This makes the GL_ALPHA internal format work.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Change use of BLEND_ to BLEND2_,
BLEND_* a3xx_rb_blend_opcode
BLEND2_* is a2xx_rb_blend_opcode
This makes no effective difference as the used enumerant has the same
value (0), but the other enumerants do not match 1-to-1 so this will
avoid future problems.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robdclark@gmail.com>
The format enumeration comes comes from the yamoto
register headers that are part of the amd-gpu kernel driver.
(see freedreno envytools commit b8fb7978e7ae106d0d11d0b238ab2ba2d4dd9d43)
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Avoid using malloc in the draw path of mesa.
Since the draw_count is a user api input, fall back to malloc if
the amount of consumed stack space may get too high.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Move the files, adapt to the naming scheme in tnl, update callers
and build system.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
The legacy draw paths from back before 2012 contained a gl_vertex_array
array for the inputs to be used for draw. So all draw methods from legacy
drivers and everything that goes through tnl are originally written
for this calling convention. The same goes for tools like t_rebase or
vbo_split*, that even partly still have the original calling convention
with a currently unused such pointer.
Back in 2012 patch 50f7e75
mesa: move gl_client_array*[] from vbo_draw_func into gl_context
introduced Array._DrawArrays, which was something that was IMO aiming for
a similar direction than Array._DrawVAO introduced recently.
Now several tools like t_rebase and vbo_split*, which are mostly used by
tnl based drivers, would need to be converted to use the internal
Array._DrawVAO instead of Array._DrawArrays. The same goes for the driver
backends that use any of these tools.
Alternatively we can reintroduce the gl_vertex_array array in its call
argument list and put these tools finally into the tnl directory.
So this change reintroduces this gl_vertex_array array for the legacy
draw paths that are still required for the tools t_rebase and vbo_split*.
A followup will move vbo_split also into tnl.
Note that none of the affected drivers use the DriverFlags.NewArray
driver bit. So it should be safe to remove this also for the legacy
draw path.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Remove the vbo_indirect_draw_func vbo callback and make the default
implementation use the drivers main draw callback function directly.
This will be needed with the next changes when drivers without own main
drivers DrawIndirect implementation get moved to the main drivers
Draw method.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Let the i965 backend have its own gl_vertex_array array and basically
reimplement the way _vbo_draw works.
Note that brw_draw_indirect_prims calls brw_draw_prims internally
and gets its update to Array._DrawArray by this way.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Let the gallium backend have its own gl_vertex_array array and basically
reimplement the way _vbo_draw works.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Otherwise, any indirect push constant access results in an assertion
failure when we start digging through the channel_sizes array. This
fixes dEQP-VK.pipeline.push_constant.graphics_pipeline.dynamic_index_vert
on Haswell. It should be a harmless no-op for GL since indirect push
constants aren't used there.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Fixes: e69e5c7006 "i965/vec4: load dvec3/4 uniforms first in the..."
This fixes the fs-interpolateAtCentroid-block-array piglit test on i965.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: mesa-stable@lists.freedesktop.org
Because nir_instr_remove is an inline wrapper around nir_instr_remove_v,
the compiler should be able to tell that the return value is unused and
not emit the extra code in most cases.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This allows the WGL_SWAP_INTERVAL env var to override any application
calls to wglSwapIntervalEXT(). Useful for debugging, or to set the
interval to zero to effectively disable the swap interval.
Note: we also rename the previous instance of SVGA_SWAP_INTERVAL to
WGL_SWAP_INTERVAL since this is a WGL feature and not related to the
svga driver.
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
This fixes a Windows build warning where the prototypes for the ES
function in the header file don't match the prototypes in this file
because the GL_API and GLAPI macros are defined differently.
v2: defined GL_API to KEYWORD1 instead of GLAPI, per Mathias.
Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Marek Olšák
Iago Toral Quiroga
Timothy Arceri
Rob Clark
Wladimir J. van der Laan
Mathias Fröhlich
Jason Ekstrand
Brian Paul