this fixes mipmapping with saturate by saturating the coord param while
passing an additional param (partial derivatives or lod) that uses the
unsaturated coord value
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8756>
This reverts the code back to the form it was before, but with an
explicitly sized float32 instead of float, now that all producers are
switched over.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7989>
It is UB to initialize unions on the stack and rely on bits not covered
by the initialized union member to be zero. Lets just simplify it and
move the entire nir_const_value off the stack.
While we're in there, sprinkle around some const.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/3778
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7579>
Some GPUs can sample biplanar formats like NV12 natively, returning
the YUV values. Add a lowering type that uses that for sampling and
relies on existing colorspace conversions.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6693>
packing_16 with floats assumed 1 (shadow) or 4 components. But query
lod operations return 2.
Fixes the following test with v3dv:
dEQP-VK.ycbcr.query.lod.fragment.r8g8b8a8_unorm
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5863>
Similar to other skips for texture queries that don't actually sample
the texture and which results are not packed.
We can't use nir_tex_instr_is_query() here to skip the lowering for all
queries since that causes regressions in Piglit. Apparently, we do want
to lower some of the query results. In particularly, the LOD query.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6169>
This change adds support for BT709 and BT2020 colorspace to the YUV
lowering pass. The default remains BT601.
This change also fixes minor imprecision in the last digits of the BT601
offsets due to computation from rounded values when the math was
simplified.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6122>
v2: remove the option to actually request normalization and its
application in Intel < Gen6 (Jason)
v3: Also don't lower for query operations (Jason)
Fixes: 1ce8060c25
nir/lower_tex: support for lowering RECT textures
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5105>
This reverts commit 4cda61f11e for now,
as it appears to break i965 CI (32,000+ failures). Rob and I suspect
we need to do the equivalent of 1c6a2efa06
on i965 - we are doing nir_lower_tex and brw_nir_lower_resources in the
wrong order and that's likely triggering this condition. Once we fix
that, we should put this patch back.
It isn't going to do the right thing, because texture_index/
sampler_index defaults to zero.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3368>
We don't expect the output of a TXS instruction to be wider than a
vec3. Add an assert() to make sure this never happens.
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
The V3D driver has an open-coded solution for this, and we need the
same thing for Panfrost, so let's add a generic way to lower TXS(LOD)
into max(TXS(0) >> LOD, 1).
Changes in v2:
* Use == 0 instead of !
* Rework the minification logic as suggested by Jason
* Assign cursor pos at the beginning of the function
* Patch the LOD just after retrieving the old value
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
get_texture_size() will create a txs instruction with ->sampler_dim set
to the original tex->sampler_dim. The condition to call lower_rect()
only checks the value of ->sampler_dim and whether lower_rect is
requested or not. This leads to an infinite loop when calling
nir_lower_tex() with the same options until it returns false.
In order to avoid that, let's move the tex->sampler_dim patching before
get_texture_size() is called. This way the txs instruction will have
->sampler_dim set to GLSL_SAMPLER_DIM_2D and nir_lower_tex() won't try
to lower it on the subsequent passes.
Changes in v2:
* Add Jason R-b
* Add a comment explaining why we patch ->sampler_dim at the beginning
of the lower_rect() func
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
The code considers that projector lowering was done even if it's not
really the case. Change the project_src() prototype to return a bool
encoding whether projector lowering happened or not and update the
progress var accordingly in nir_lower_tex_block().
---
Changes in v2:
* Add Jason R-b
* Drop the part suggesting that nir_lower_rect() could be called in
a do-while(progress) loop.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
This flag has caused more confusion than good in most cases. You can
validly use imov for floats or fmov for integers because, without source
modifiers, neither modify their input in any way. Using imov for floats
is more reliable so we go that direction.
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Use a different arrangement of constants to allow more ffma.
A vec4 backend will now use 3 fma for yuv_to_rgb. On freedreno/ir3, it is
down from 10 to 7 alu (4 fma, 3 mul, 3 add to 7 fma). Other backends
shouldn't be hurt.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Eric Anholt <eric@anholt.net>
Tested-by: Ian Romanick <ian.d.romanick@intel.com>
We already add the LOD src, so go ahead and update the texop as well
when this option is set.
v2: Make it an option. (Rob Clark)
v3: Use a more concise name suggested by Jason.
Reviewed-by: Rob Clark <robdclark@gmail.com>
When we have a bindless sampler, we need an instruction header. Even in
SIMD8, this pushes the instruction over the sampler message size maximum
of 11 registers. Instead, we have to lower TXD to TXL.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
v2: remove & operator in a couple of memsets
add some memsets
v3: fixup lima
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> (v2)
When using NV_compute_shader_derivatives to set a derivative group,
a compute shader supports texture with implicit LOD calculation, so
don't set an explicit LOD.
Note if the extension is used but the derivative group is not
specified, it will default to LOD=0 as before.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
On Intel, we have both bindless and bindful and we'd like to use them at
the same time if we can so we need to be able to distinguish at the NIR
level between the two. This also fixes nir_lower_tex to properly handle
bindless in its tex_texture_size and get_texture_lod helpers.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
When we have a larger sampler index, we get into the "high sampler"
scenario and need an instruction header. Even in SIMD8, this pushes the
instruction over the sampler message size maximum of 11 registers.
Instead, we have to lower TXD to TXL.
Fixes: cb98e0755f "intel/fs: Support min_lod parameters on texture..."
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The memory layout associated with this format would be:
Byte: 0 1 2 3
Component: V U Y X
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Patch adds nir_lower_tex_options as parameter to sample_plane so that
we don't need to extend nir_tex_instr for this.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
V3D returns the texels in a different order in the resulting vec4 from
what GLSL wants, so we need to put in a swizzle. Fixes
dEQP-GLES31.functional.texture.gather.basic.2d.rgba8.base_level.level_1
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
I've been doing this in the nir-to-vir and nir-to-qir backends of v3d and
vc4, but nir could potentially do some useful stuff for us (like avoiding
unpack/repacks) if we give it the information.
v2: Skip lowering for txs/query_levels
v3: Fix a crash on old-style shadow
v4: Rename to tex_packing, use nir_format_unpack_sint/uint helpers, pack
the enum.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Tested on gen9.
v2: Rename lower_txd_3d_surafaces flag to lower_txd_3d (Jason Ekstrand)
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
I don't know if one is better than the other or not but this approach
has the advantage that we never forget to copy information over and
we're not hard-coding quite as many assumptions. It's also a lot
simpler and much less code.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Instead of having to call two different lower_gradient functions based
on whether or not it's a cube, just make lower_gradient handle cubes.
This significantly simplifies some of the logic.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Byte ordering is :
0: V
1: U
2: Y
3: A
v2: Split refactoring of alpha channel (Lionel)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com> (v1)
Acked-by: Eric Engestrom <eric.engestrom@intel.com> (v2)
We're about to introduce AYUV support which provides its own alpha
channel. So give alpha as a parameter and set it to 1 on exising
formats.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
A while ago, we added a bunch of format conversion helpers; we should
use them instead of hand-rolling sRGB conversions.
Reviewed-by: Eric Anholt <eric@anholt.net>
There are no fixed sized array arguments in C, those are simply pointers
to unsized arrays and as the size is passed in anyway, just rely on that.
where possible calls are replaced by nir_channel and nir_channels.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This should make nir_lower_tex properly handle deref instructions as
well as make it more correct when texture arrays are used and it's
called after lowering samplers to binding table indices.
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This will be removed at the end of the transition, but add some tracking
plus asserts to help ensure that lowering passes are called at the
correct point (pre or post deref instruction lowering) as passes are
converted and the point where lower_deref_instrs() is called is moved.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We want the clamping of the coordinate to apply after the offset, so we
need to do math to lower the offset out of the instruction. Fixes texwrap
offset cases for GL_CLAMP with GL_NEAREST on vc5.
Note: I moved the get_texture_size() verbatim, so that it was defined
before use.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
v2:
- Use helper to add a new source to the texture instruction.
v3:
- Use nir_tex_instr_src_index() to simplify the patch (Jason).
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Mike Blumenkrantz
Connor Abbott
Rhys Perry
Rob Clark
Kristian H. Kristensen
Alejandro Piñeiro
Iago Toral Quiroga
David Stevens
Gert Wollny
Jason Ekstrand
Kenneth Graunke
Boris Brezillon
Jonathan Marek
Caio Marcelo de Oliveira Filho
Jason Ekstrand
Karol Herbst
Kasireddy, Vivek
Tapani Pälli
Eric Anholt
Sagar Ghuge
Lionel Landwerlin
Rob Clark
Samuel Iglesias Gonsálvez
Johnson Lin