Gallium should be prepared fine for ARB_clip_control.
So enable this and mention it in the release notes.
v2:
Only enable for drivers announcing the freshly introduced
PIPE_CAP_CLIP_HALFZ capability.
v3:
Use extension enable infrastructure to connect PIPE_CAP_CLIP_HALFZ
with ARB_clip_control.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Froehlich <Mathias.Froehlich@web.de>
Also fixes two sided lighting which was broken at least
on pre-evergreen by commit b1eb00.
Signed-off-by: Glenn Kennard <glenn.kennard@gmail.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
The quadop-based method we currently use on all chipsets already
provides the fine version of the derivatives.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
This extension is identical to NV_texture_barrier. Alias
glTextureBarrier to the existing glTextureBarrierNV and use the existing
NV_texture_barrier extension bit.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
These two were added ages ago, with an explicit comment "Hacks ..."
They have been insufficient for years and maintainers needed to
explicitly handle the build themselves.
Rather than lying and pretending that it works, just kill this hack and
let maintainers build things the way it should be done for their
distribution.
Document the removal in the release notes.
Suggested-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
I don't know of any hardware which supports it.
With this, GL_OES_compressed_ETC1_RGB8_texture is supported if RGBA8
is supported.
Reviewed-by: Glenn Kennard <glenn.kennard@gmail.com>
Add a new winsys and target that can be used with a dri2 state tracker
and loader instead of drisw. This allows to use gbm as a dri2/image
loader and avoid the extra copy from the backbuffer to the shadow
frontbuffer.
The new driver is called "kms_swrast", and is loaded by gbm as a
fallback, because it is only useful with the gbm platform (as no buffer
sharing is possible)
To force select the driver set the environment variable
GBM_ALWAYS_SOFTWARE
[Emil Velikov]
- Rebase on top of gallium megadriver.
- s/text/test/ in configure.ac (Spotted by Andreas Pokorny).
- Add scons support for winsys/sw/kms-dri and fix the build.
- Provide separate DriverAPI, due to different InitScreen hook.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Only supported on evergreen and later. Currently limited
to single component textures as the hardware GATHER4
instruction ignores texture swizzles.
Piglit quick run passes on radeon 6670 with all
applicable textureGather tests, no regressions.
Signed-off-by: Glenn Kennard <glenn.kennard@gmail.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
The assumption is that any driver capable of emitting layer from the
vertex shader and supporting viewports should be able to also handle
emitting viewport index from the vertex shader.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Tobias Droste <tdroste@gmx.de>
If multiple viewports are supported, that implies the presence of a GS
and layered rendering, so we can enable ARB_fragment_layer_viewport as
well.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
As far as I can tell, the Intel mesa driver is the only driver in the world
still supporting this legacy extension. If someone wants to do bump
mapping, they can use shaders.
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> [v1]
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz> [v2]
Reviewed-by: Ian Romanick <idr@freedesktop.org> [v3]
All of the bits appear to already be in place to support this in the
sampler (which the original AMD version didn't allow).
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The extension is always supported if GLSL 1.30 is supported.
Softpipe and llvmpipe support is also added (trivial).
Radeon and nouveau support is already done.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Both changes landed in 10.2, and for people not following the
development cycle these will come as a surprise. Note that the
pipe_* interface is not stable.
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Rob Clark <robclark@freedesktop.org>
relnotes weren't updated this whole time, so I went through all the
GL3.txt changes and picked out the nouveau ones since 10.1.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The dd_function_table::BlitFramebuffer is already initialized to
_mesa_meta_BlitFramebuffer, so it should just work.
Tested on a Radeon 7500 (OpenGL renderer string: Mesa DRI R100 (RV200
5157) TCL DRI2). I couldn't do a full piglit run because it would tank
the system with or without this patch. I just ran all the blit tests
(-t blit to piglit-run.py). Only fbo-sys-sub-blit failed. All of the
other tests that weren't skipped (i.e., all the multisample and sRGB
tests skip) passed.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The dd_function_table::BlitFramebuffer is already initialized to
_mesa_meta_BlitFramebuffer, so it should just work.
Tested on a FireGL 8800 (OpenGL renderer string: Mesa DRI R200 (R200
5148) TCL DRI).
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This extension enabled the use of texture array with fixed-function and
assembly fragment shaders. No applications are known to use this
extension.
NOTE: This patch regresses GL_TEXTURE_1D_ARRAY and GL_TEXTURE_2D_ARRAY
cases of the copyteximage piglit test. The test is incorrectly using
texture arrays with fixed function while only requiring the
GL_EXT_texture_array extension. A fix for the test has been posted to
the piglit mailing list.
http://lists.freedesktop.org/archives/piglit/2013-November/008639.html
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
.. and mark them off on the extensions list as done.
V2: Enable only if pipelined register writes work.
V3: Also update relnotes
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Cc: "10.0" <mesa-stable@lists.freedesktop.org>
Acked-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The X.Org state tracker is gone, as well as the xvmc/vdpau
r300 and softpipe targets.
Cc: "10.0" <mesa-stable@lists.freedesktop.org>
Acked-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Now that branch 10.0 is created, bump the minor version in
master.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Mesa now supports OpenGL 3.2 and GLSL 1.50, so bump the Mesa major
version from 9 to 10 to reflect this.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The change is very small. Do seamless filtering if either the context
enable is set or the sampler enable is set.
The AMD_seamless_cubemap_per_texture says:
"If TEXTURE_CUBE_MAP_SEAMLESS_ARB is emabled (sic) globally or the
value of the texture's TEXTURE_CUBE_MAP_SEAMLESS_ARB parameter is
TRUE, seamless cube map sampling is enabled..."
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
In Mesa, this extension is implemented purely in software. Drivers may
*optionally* provide optimized paths.
NOTE: This has the side effect of enabling the extension in the radeon,
r200, and nouveau drivers.
v2: Minor whitespace tidying (suggested by Brian).
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
Commit bab755a made the implementation a no-op, and it was only ever
enabled by software rasterizers.
v2: Move the spec into docs/specs/OLD since it's now obsolete
(squashed patch from Andreas Boll)
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
As far as I can tell, no driver has enabled this extension since c6499a7
back in 2007.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Handle legacy/obsolete specs as well
List all specs in extensions.html
Mark 'OLD' extensions as obsolete in extensions.html
Update the spec location in old relnotes
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
relnotes-*html > relnotes/*html
RELNOTES-* > relnotes/*
fix links, css and frames
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>