Ported from RadeonSI. The time where shaders are idle should
be shorter now. This can give a little boost, like +6% with
the dynamicubo Vulkan demo.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Galliums query_type used in APIs is unsigned.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Wladimir J. van der Laan <laanwj@gmail.com>
Passes most occlusion query piglits. The following piglits are broken:
- spec@arb_occlusion_query@occlusion_query_meta_fragments
- spec@arb_occlusion_query@occlusion_query_meta_save
- spec@arb_occlusion_query2@render
v1 -> v2:
- use one sample provider for all occlusion queries tyes
- add comment about 'magic' value 0x1DF5E76
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Wladimir J. van der Laan <laanwj@gmail.com>
No hardware query is supported yet.
v1 -> v2
- removed query_type from strcut etna_hw_sample_provider
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Wladimir J. van der Laan <laanwj@gmail.com>
Update to etna_viv commit 6c9c706.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Wladimir J. van der Laan <laanwj@gmail.com>
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Hook up the RendererQuery for __DRI2_RENDERER_HAS_CONTEXT_PRIORITY to
report the available DRM_I915_GEM_CONTEXT_SETPARAM options based on the
per-client default context. The kernel will validate the request to change
the property, so we get an accurate reflection of available support
(based on kernel version and privilege) and we should only have to do it
once during screen setup -- although the SETPARAM should be fast, they
are still an ioctl each.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Decode the EGL/DRI priority enum into the [-1023, 1023] range as
interpreted by the kernel and call DRM_I915_GEM_CONTEXT_SETPARAM to
adjust the priority. We use 0 as the default medium priority (also the
kernel default) and so only need adjust up or down. By only doing the
adjustment if not setting to medium, we can faithfully report any error
whilst setting without worrying about kernel version.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Mention to the debug log if the kernel scheduler is enabled; and in
particular if it has preemption enabled.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Pulling in changes up to
kernel commit ac14fbd460d0ec16e7750e40dcd8199b0ff83d0a
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue Oct 3 21:34:53 2017 +0100
drm/i915/scheduler: Support user-defined priorities
and including the fixup from
kernel commit 822a4b673284672af697ccd66e8795f8a712a90d
Author: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Date: Fri Oct 6 13:45:59 2017 +0300
drm/i915: Don't use BIT() in UAPI section
for implementing IMG_context_priority.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Jump through the layers of abstraction between egl and dri in order to
feed the context priority attribute through to the backend. This
requires us to read the value from the base _egl_context, convert it to
a DRI attribute, parse it again in the generic context creator before
passing it to the driver as a function parameter.
In order to not require us to pass back the actual value of the context
priority after creation, we impose that drivers should report the
available set of priorities during screen setup (and then they may chose
to fail if given an invalid value as that should have been checked at
the user boundary.)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Ben Widawsky <ben@bwidawsk.net> # i915/i965
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
IMG_context_priority
https://www.khronos.org/registry/egl/extensions/IMG/EGL_IMG_context_priority.txt
"This extension allows an EGLContext to be created with a priority
hint. It is possible that an implementation will not honour the
hint, especially if there are constraints on the number of high
priority contexts available in the system, or system policy limits
access to high priority contexts to appropriate system privilege
level. A query is provided to find the real priority level assigned
to the context after creation."
The extension adds a new eglCreateContext attribute for choosing a
priority hint. This stub parses the attribute and copies into the base
struct _egl_context, and hooks up the query similarly.
Since the attribute is purely a hint, I have no qualms about the lack of
implementation before reporting back the value the user gave!
v2: Remember to set the default ContextPriority value to medium.
v3: Use the driRendererQuery interface to probe the backend for
supported priority values and use those to mask the EGL interface.
v4: Treat the priority attrib as a hint and gracefully mask any requests
not supported by the driver, the EGLContext will remain at medium
priority.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Emil Velikov <emli.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The Vulkan specification says:
"... an execution dependency with only VK_PIPELINE_STAGE_TOP_OF_-
PIPE_BIT in the source stage mask will effectively not wait for
any prior commands to complete."
Signed-off-by: Fredrik Höglund <fredrik@kde.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Indirect draws with a count buffer will be refactored in a
separate patch.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Similar to the dispatch compute logic but for draw calls. For
convenience, indirect draws will be converted in a separate
patch.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Only on CIK and later. We should only update VGT_INDEX_TYPE but
it seems easier to re-emit all the index buffer packets.
Fixes: 966d66f28f (radv: do not re-emit the index buffer for every draw call)
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This will allow us to fix the VGT_INDEX_TYPE issue properly.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
To be consistent with the emit function name.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
CLEAR_STATE will initialize DB_COUNT_CONTROL to 0 for CIK+.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
It is already done in NIR.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
It is already done in NIR.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
v2:
- Use helper to add a new source to the texture instruction.
v3:
- Use nir_tex_instr_src_index() to simplify the patch (Jason).
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This fixes some access to the tess eval shader when it's combined
with geometry on gfx9.
This is a review of Bas's commit:
radv: Prevent crashing by accessing TES for VGT reuse depth.
Signed-off-by: Dave Airlie <airlied@redhat.com>
This struct used to rely on being in a union, it isn't anymore,
so we have to pick the correct outinfo struct now.
This should fix a regression since the union became a struct.
dEQP-VK.tessellation.geometry_interaction.point_size.vertex_set_geometry_set
Fixes: 6078a3bd51 (ac/nir: Allow ac_shader_variant_info to contain info about multiple stages.)
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Remove allocation of > 2kbyte buffers into context memory in
swr_copy_to_scatch_space() (which is used to copy small vertex/index buffers
and shader constants to a scratch space to be used by the upcoming draw.)
Large shader constant allocations need to be done in the circular scratch
buffer instead of context memory, because their values persist across
render calls.
Also lower SCRATCH_SINGLE_ALLOCATION_LIMIT to 8k, since allocations of larger
buffers will get too large for the circular scratch space.
Fixes render issues with CEI Ensight.
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
Looking at shader traces I noticed some registers were missing,
one of them was being eaten by the wrong clear state length.
Fixes: 4f42ea4dc (radv: use CLEAR_STATE for initializing some registers)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Otherwise -Dgallium-drivers= will cause libmesa_gallium to be built and
the megadriver install script to attempt to install drivers without any
actual drivers being built.
fixes: 66f97f6640 ("meson: build radeonsi")
Reported-by: Rafael Antognolli <rafael.antognolli@intel.com>
Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Tested-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
It looks the original indirect mask was probably copied from
ANV.
Sascha Willems demo results:
tessellation ~4000 -> ~4200 fps
V2: continue lowering local indirects due to llvm deficiencies.
Tested-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>