By default line mode is VK_LINE_RASTERIZATION_MODE_RECTANGULAR_EXT,
when lineRasterizationMode is VK_LINE_RASTERIZATION_MODE_BRESENHAM_EXT
and primtype is line - we enable bresenham line mode.
We have to disable MSAA when bresenham lines are used, this is
a hardware limitation and spec allows it:
"When Bresenham lines are being rasterized, sample locations may
all be treated as being at the pixel center (this may affect
attribute and depth interpolation)."
This forces us to re-emit msaa state when line mode is changed.
Signed-off-by: Hyunjun Ko <zzoon@igalia.com>
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6020>
This doesn't actually use the functionality or implement prolog
compilation yet.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11717>
This is mostly a matter of auditing uses of
cmd->state.framebuffer and replacing every use of fb->attachments with
cmd->state.attachments. We already weren't using the attachments
anywhere outside of the render pass, so this is pretty straightforward.
We also don't have any use for anything in
VkFramebufferAttachmentImageInfo so we can just ignore it.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13228>
This commit enables NGG culling on all GFX10.3 GPUs by default.
A new debug flag environment variable RADV_DEBUG=nonggc is added to
disable this feature on GPUs where it is enabled by default.
The previous perf test flag RADV_PERFTEST=nggc will not be needed on
GFX10.3 anymore but it can still be used to enable the feature on
GPUs where it isn't on by default.
Totals from 58239 (45.27% of 128647) affected shaders:
VGPRs: 1989752 -> 2049408 (+3.00%); split: -3.21%, +6.21%
SpillSGPRs: 675 -> 883 (+30.81%); split: -78.07%, +108.89%
CodeSize: 72205968 -> 153572764 (+112.69%)
LDS: 0 -> 227125248 (+inf%)
MaxWaves: 1614598 -> 1646934 (+2.00%); split: +3.08%, -1.08%
Instrs: 14202239 -> 29654042 (+108.80%)
Latency: 87986508 -> 136960419 (+55.66%); split: -0.23%, +55.89%
InvThroughput: 14444832 -> 21141875 (+46.36%); split: -0.01%, +46.37%
VClause: 340794 -> 493067 (+44.68%); split: -1.33%, +46.01%
SClause: 520983 -> 738636 (+41.78%); split: -0.25%, +42.03%
Copies: 775639 -> 2787382 (+259.37%)
Branches: 296911 -> 1225431 (+312.73%)
PreSGPRs: 1316896 -> 2057270 (+56.22%); split: -0.14%, +56.36%
PreVGPRs: 1473558 -> 1658432 (+12.55%); split: -1.44%, +13.99%
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13086>
v2: Use u_foreach_bit64() (Samuel)
v3: Add missing handling of VkMemoryBarrier2KHR in pNext of
VkSubpassDependency2KHR (Samuel)
v4: Remove unused ANV_PIPELINE_STAGE_PIPELINED_BITS (Ivan)
v5: fix missing anv_measure_submit() (Jason)
constify anv_pipeline_stage_pipelined_bits (Jason)
v6: Split flushes & invalidation emissions on
vkCmdSetEvent2KHR()/vkCmdWaitEvents2KHR() (Jason)
v7: Only apply flushes once on events (Jason)
v8: Drop split flushes for this patch
v9: Add comment about ignore some fields of VkMemoryBarrier2 in
VkSubpassDependency2KHR (Jason)
Drop spurious PIPE_CONTROL change s/,/;/ (Jason)
v10: Fix build issue on Android (Lionel)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9045>
The main motivation is to improve the score of viewperf13/snx.
This new interface is designed to be optimal for display lists as implemented
by the vbo module. It has much lower CPU overhead in the frontend, threaded
context, and the driver.
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13050>
This was initially written by Mark Janes, and was part of MR 7354.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Mike Blumenkrantz <michael.b.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13043>
- Change section name to be more general
- Remove INTEL_SCALAR_VS (dropped as part of release 20.3)
- Sort alphabetically
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Mike Blumenkrantz <michael.b.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13043>
Was useful in testing a difference between D3D and VK ATOC rendering earlier today, would be nice to check this more easily in future.
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13069>
Below were missed in the last update:
VK_KHR_incremental_present
VK_KHR_swapchain_mutable_format
Signed-off-by: Yiwei Zhang <zzyiwei@chromium.org>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12980>
This helps to get a really nice and aligend disasm output.
Just use :align=X to define where in the line the field
should be printed.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11321>
Android.mk was removed, so remove a reference to it from Panfrost
documentation. We should document building for Android, but it'll be
through meson. This note as-is adds more confusion than note.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12914>
This is required for d3d10+, which has depth_clamp always enabled
regardless of depth_clip (in contrast to OpenGL, where enabling
depth_clamp disables depth_clip). There doesn't seem to be a GL
extension for it, but it will be used for lavapipe to implement
VK_EXT_depth_clip_enable.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12260>
We disabled PIPE_CAP_PRIMITIVE_RESTART on ffc4d82438 ("v3d: Disable
PIPE_CAP_PRIMITIVE_RESTART") because the HW can only support
PIPE_CAP_PRIMITIVE_RESTART_FIXED_INDEX subset.
But the introduction of PIPE_CAP_EMULATE_NONFIXED_PRIMITIVE_RESTART
allows us to support these nonfixed primitive restarts so we can now
re-enable NV_primitive_restart for OpenGL extensions.
Acked-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12669>
Everything should be already supported, except patch list.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12611>
The prior method of checking the result of getenv() for NULL would cause
the feature to be enabled for INTEL_NO_HW=0.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12007>
This extension relaxes the alignment requirements to allow the GL std430
layout to be used. freedreno/ir3 already supports this (via
PIPE_CAP_LOAD_CONSTBUF).
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12495>
We would like draw-only display lists to have immutable draw info and
this is the only GL non-draw state in pipe_draw_info (not counting
view_mask).
It also allows removing some code from draw_vbo for tessellation.
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12351>
The two rasterpos fails looks related to GLSL linking, the vertex
shader is linked with the geometry shader which doesn't use any
of it's outputs so they seem to get removed, which stops the rasterpos
from working.
Reviewed-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12374>
meson complains that =false is deprecated and that we should use
=disabled instead.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12344>
Restore part of the perfetto documentation deleted by mistake.
Signed-off-by: Antonio Caggiano <antonio.caggiano@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11846>
When downloading traces from a restricted repository, the Authorization
header will be set. Previous to this change, the http proxy would drop
it.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6441>
Add a job to test with traces that we cannot redistribute, listed in a
separate file. Since those traces might not be accessible by everyone,
this job is created only when the pipeline is triggered by `marge-bot`.
This job is optional because otherwise it could be blocking a merge
request of someone who cannot really debug the issue due to lack of
access to these traces.
The documentation available under `docs/ci` goes into more details
explaining the rationale behind optional traces.
Signed-off-by: Antonio Caggiano <antonio.caggiano@collabora.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6441>
Some floating atomic instructions are not available on GFX8-9.
No LLVM support.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12060>
v1. Hyunjun Ko <zzoon@igalia.com>
- Add to hanlde VK_DESCRIPTOR_POOL_CREATE_HOST_ONLY_BIT_VALVE
- Don't support VK_DESCRIPTOR_TYPE_INPUT_ATTACHMENT and
VK_DESCRIPTOR_TYPE_COMBINED_IMAGE_SAMPLER
v2. Hyunjun Ko <zzoon@igalia.com>
- Fix some indentations and nitpicks.
- Add the extension to features.txt
v3. Hyunjun Ko <zzoon@igalia.com>
- Remove unnecessary asserts.
Signed-off-by: Eduardo Lima Mitev <elima@igalia.com>
Signed-off-by: Hyunjun Ko <zzoon@igalia.com>
Reviewed-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9322>