Some parameters need to be checked only once.
check_valid_to_render needs to be called only once.
The validate function is based on the one for DrawElements.
Reviewed-by: Brian Paul <brianp@vmware.com>
This is a cleanup for ARB_transform_feedback3, where
GL_MAX_TRANSFORM_FEEDBACK_BUFFERS is introduced for interleaved attribs and
has the same meaning as GL_MAX_.._SEPARATE_ATTRIBS for separate attribs.
Also, the maximum number of TFB buffers is reduced from 32 to 4, which makes
this patch useful even without the extension.
I don't know of any hardware which can do more than 4.
Reviewed-by: Brian Paul <brianp@vmware.com>
Doesn't really change the generated assembly, but produces more compact IR,
and of course, makes code more consistent.
Reviewed-by: Brian Paul <brianp@vmware.com>
For some reason regular gcc on Linux didn't catch these but the mingw
compiler did (generated errors, not warnings).
v2: include the changes in src/mapi/ too
Fixes the es2 build with gcc.
Note: in glext.h the prototypes for glShaderSource() and glShaderSourceARB()
disagree: only the former has the extra const qualifier.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Set the step_rate value when drawing to implement
ARB_instanced_arrays for gen >= 4.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Previously, we were counting gl_FrontFacing, gl_FragCoord and gl_PointCoord
against the limit of varying variables. This prevented some valid shaders
from linking.
The other potential solution to this is to have the driver advertise
more varying vars or set the GLSLSkipStrictMaxVaryingLimitCheck flag.
But the above-mentioned variables aren't conventional varying attributes
so it doesn't seem right to count them.
Reviewed-by: Eric Anholt <eric@anholt.net>
Updated lp_build_printf to share common code.
Removed specific lp_build_print_vecX.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Since we don't have them in hw we emulate them in the shader. Although not
recommended by the spec it is legit.
As a side effect we also get GL 2.1. I think this is as far as we can take
the i915.
The most recent commit adds support for comments and macro expansion
on #line directives. Add testing to verify the new features.
Signed-off-by: Carl Worth <cworth@cworth.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The GLSL specification requires that #line directives be interpreted
after macro expansion. Our existing implementation of #line macros in
the lexer prevents conformance on this point.
Moving the handling of #line from the lexer to the parser gives us the
macro expansion we need. An additional benefit is that the
preprocessor also now supports comments on the same line as #line
directives.
Finally, the preprocessor now emits the (fully-macro-expanded) #line
directives into the output. This allows the full GLSL compiler to also
see and interpret these directives so it can also generate correct
line numbers in error messages.
Signed-off-by: Carl Worth <cworth@cworth.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This function is currently used only in the expansion of #if lines,
but we will soon be using it more generally (for the expansion of
(_glcpp_parser_expand_and_lex_from) and some more documentation.
Signed-off-by: Carl Worth <cworth@cworth.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Commit b823b99ec0 switched from using
functions such as ralloc_asprintf and ralloc_strcat to
ralloc_asprintf_rewrite_tail. This change maintains the string's
length as a aparamter that is updated by the ralloc functions (rather
than recomputing it with strlen over and over).
However, the change failed to updated two locations (glcpp_error and
glcpp_warning), with the result that the string's length wasn't
updated by these calls. Then, subsequent calls to other
ralloc_asprintf_rewrite_tail would overwrite the text appended by
glcpp_error.
This commit fixes the two missing updates, and restores line numbers
to the output of glcpp error messages, (as noticed by a glcpp unit
test case that has been failing since the above-mentioned commit).
Signed-off-by: Carl Worth <cworth@cworth.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
A strict reading of the GLSL specification would have this be an
error, but we've received reports from users who expect the
preprocessor to interepret undefined macros as 0. This is the standard
behavior of the rpeprocessor for C, and according to these user
reports is also the behavior of other OpenGL implementations.
So here's one of those cases where we can make our users happier by
ignoring the specification. And it's hard to imagine users who really,
really want to see an error for this case.
The two affected tests cases are updated to reflect the new behavior.
Signed-off-by: Carl Worth <cworth@cworth.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
DUAL_EXPORT can be enabled on r6xx/r7xx when all CBs use 16-bit export
and there is no depth/stencil export.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
It seems DUAL_EXPORT on evergreen may be enabled when all CBs use 16-bit export
mode (EXPORT_4C_16BPC), also there should be at least one CB, and the PS
shouldn't export depth/stencil.
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
In some cases TGSI shader has more color outputs than the number of CBs,
so it seems we need to limit the number of color exports. This requires
different shader variants depending on the nr_cbufs, but on the other hand
we are doing less exports, which are very costly.
v2: fix various piglit regressions
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Shader variants are stored in the list, the key for lookup is based on the
states that require different hw shaders - currently it's rctx->two_side (all
gpus) and rctx->nr_cbufs (evergreen/cayman, when writes_all property is set).
v2:
- use simple list instead of keymap as suggested by Marek on irc
- call r600_adjust_gprs from r600_bind_vs_shader for r6xx/r7xx
(r600_shader_select isn't used for vertex shaders currently)
v3:
- fix call to r600_adjust_gprs - do it after updating current shader
Improves performance for some apps, e.g. FlightGear -
see https://bugs.freedesktop.org/show_bug.cgi?id=50360
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
As with the previous commit for softpipe.
v2: remove 'default' case to get compile-time warning
Reviewed-by: Marek Olšák <maraeo@gmail.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
These all return zero. Add a debug_printf() to catch the default case so
we don't accidently mishandle something important in the future.
v2: remove 'default' case to get compile-time warning
Reviewed-by: Marek Olšák <maraeo@gmail.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
This is actually required for GL_ARB_framebuffer_object, but the state
tracker doesn't currently check it.
Direct3D 9 allows mixed format color buffers with some restrictions.
Setting this allows Unigine Heaven 2.5 and 3.0 to run. Tested both on
GL and D3D hosts.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
The type is the destination type (i.e. float vector) and not the
source type. Fixes piglit fs-{in,de}crement-uint.
Signed-off-by: Olivier Galibert <galibert@pobox.com>
Signed-off-by: José Fonseca <jfonseca@vmware.com>
i965 hardware needs to be informed of situations in which it's
possible for pixels (or samples) to be discarded for reasons other
than depth/stencil testing (e.g. due to an explicit "discard" in the
fragment shader). One of these situations is when
GL_ALPHA_TO_COVERAGE is enabled, since that can cause samples to be
discarded by the color calculator when the pixel's alpha value is less
than 1.0.
Without this patch, GL_ALPHA_TO_COVERAGE does not take effect on depth
buffers.
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
This patch enables the multisampling parameters
GL_SAMPLE_ALPHA_TO_COVERAGE and GL_SAMPLE_ALPHA_TO_ONE, which allow
the fragment shader's alpha output to be converted into a sample
coverage mask and ignored for blending. i965 supports these
parameters through the BLEND_STATE structure.
The GL spec allows, but does not require, the implementation to dither
the conversion from alpha to a sample coverage mask, so that alpha
values that aren't a multiple of 1/num_samples result in the correct
proportion of samples being lit. A bit exists in the BLEND_STATE
structure to enable this functionality, but according to the hardware
docs it must be disabled on Sandy Bridge (see the Sandy Bridge PRM,
Vol2, Part1, p379: AlphaToCoverage Dither Enable). So it is enabled
for Gen7 only.
Fixes piglit tests
"EXT_framebuffer_multisample/sample-alpha-to-{coverage,one} {2,4}".
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
This patch enables glSampleCoverage() functionality, which allows the
client program to specify that only a portion of the samples be lit up
when performing multisampled rendering. i965 supports
glSampleCoverage() through the 3DSTATE_SAMPLE_MASK command packet,
which allows the driver to specify a bitfield indicating which samples
to light up.
Fixes piglit tests "EXT_framebuffer_multisample/sample-coverage {2,4}
{inverted,non-inverted}".
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
James Benton
Marek Olšák
José Fonseca
Johannes Obermayr
Marcin Slusarz
Brian Paul
Jordan Justen
Andreas Boll
Stéphane Marchesin
Carl Worth
Jerome Glisse
Vadim Girlin
Olivier Galibert
Paul Berry