v2: Make it clear that ARB_direct_state_access is only available on
drivers that support GL 2.0+
Signed-off-by: Fredrik Höglund <fredrik@kde.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Some bits were already there for texture views but some were missing.
In particular for cube map views things needed to change a bit.
For simplicity I ended up removing the separate face addr bit (just use
the z bit) - cube arrays didn't use it already, so just follow the same
logic there. (In theory using separate bits could allow for better hash
function but I don't think anyone ever did some measurements of that so
probably not worth the trouble, if we'd reintroduce it we'd certainly
wanted to use the same logic for cube arrays and cube maps.)
Also extend the seamless cube sampling to cube arrays - as there were no
piglit failures before this is apparently untested, but things now generally
work quite the same for cube textures and cube array textures so there
hopefully shouldn't be any trouble...
49 new piglits, 47 pass, 2 fail (both due to fake multisampling).
v2: incorporate Brian's feedback, add sampler view validation,
function rename, formatting fixes.
Reviewed-by: Brian Paul <brianp@vmware.com>
All the functionality was pretty much there, just not tested.
Trivially fix up the missing pieces (take target info from view not
resource), and add some missing bits for cubes.
Also add some minimal debug validation to detect uninitialized target values
in the view...
49 new piglits, 47 pass, 2 fail (both related to fake multisampling,
not texture_view itself). No other piglit changes.
v2: move sampler view validation to sampler view creation, update docs.
Reviewed-by: Brian Paul <brianp@vmware.com>
EGL_SOFTWARE is not supported anywhere in the code,
whereas LIBGL_ALWAYS_SOFTWARE is.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Suggested-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
This enables EGL_KHR_fence_sync and EGL_KHR_wait_sync.
Below is the difference in piglit results, before and after this patch.
No regressions and several tests improve from 'skip' to 'pass'. Out of
EGL_KHR_fence_sync tests, two of the multithreaded tests skip; all other
tests pass.
cmdline: piglit run -p gbm -t sync tests/quick.py
mesa: master@1ac7db0
piglit: 4069bec
hw: Ivybridge
| before after
------+-------------
pass | 32 46
fail | 0 0
crash | 0 0
skip | 35 21
total | 67 67
v2:
- Set fence->signalled = true in brw_fence_has_completed() too.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Other drivers which want to enable this extension must expose groups of
GPU hardware performance counters.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
After talking to Jon Leech he suggested this should be fine.
update spec to the version in the registry.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Enables ARB_depth_buffer_float. There is no sampling support for
interleaved Z32F_S8, so we store the two textures separately, one as
Z32F, the other as S8. As a result, we need a lot of additional logic
for restores and transfers.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
copy drivers from the stencil_texturing list,
softpipe is definitely broken for stencil texturing
since it uses float, but I'll look at that later.
v2.1: update relnotes
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(and mark it as DONE in docs/GL3.txt + 10.6.0 relnotes)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
Missed out with commit d99135b2e9b(configure: nuke
--with-max-{width,height})
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Switch between the two clip space definitions already available
in hardware. Update winding order dependent state according
to the clip control state.
This change did not introduce new piglit quick.test regressions on
an Ivybridge Mobile and a GM45 Express chipset.
Also it enables and passes the clip-control and clip-control-depth-precision
tests on these two chipsets.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Mathias Froehlich <Mathias.Froehlich@web.de>
The hardware only supports 4 MRTs. It should be possible to emulate
support for 8, but doesn't seem worth the trouble.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Plus nuke the final reference to osmesa from README.WIN32.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
At the moment to get an EGL image to a dma-buf file descriptor,
you have to use EGL_MESA_drm_image, and then use libdrm to
convert this to a file descriptor.
This extension just provides an API modelled on EGL_MESA_drm_image,
to return a dma-buf file descriptor.
v2: update spec for new API proposal
add internal queries to get the fourcc back from intel driver.
v2.1: add gallium pieces.
v2.2: add offsets to spec and API, rename fd->fds, stride->strides
in API. rewrite spec a bit more, add some q/a
v2.3:
add modifiers to query interface and 64-bit type for that (Daniel Stone)
specifiy what happens to num fds vs num planes differences. (Chad Versace)
v2.4:
fix grammar (Daniel Stone)
Signed-off-by: Dave Airlie <airlied@redhat.com>
Just announce support for 4 components.
While here also increase the max/min texel offsets (the limit is completely
artificial, was chosen because that's what other hardware did, however there's
other drivers using larger limits).
Over a thousand little piglits skip->pass.
v2: update docs/GL3.txt
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
This avoids MSVC the warning
warning C4013: 'isatty' undefined; assuming extern returning int
with certain versions of flex.
Reviewed-by: Brian Paul <brianp@vmware.com>
v2: Add win flex-bison link to docs/install.html.
Add the missing wayland, null, android and haiku platforms.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Matt Turner <mattst88@gmail.com>
st/egl was the only one which had support for this platform.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Matt Turner <mattst88@gmail.com>
v2: Don't use the intrinsics, the shader backend can recognize these
patterns and generates optimal code automatically.
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Implicitly required for a while, although commit 9385c592c6 (mapi:
remove u_thread.h) was the one that put the final nail on the
coffin.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Implicitly required for a while, although commit 9385c592c6 (mapi:
remove u_thread.h) was the one that put the final nail on the
coffin.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
OpenVG API seems to have dwindled away. The code
would still be interesting if we wanted to implement NV_path_rendering
but given the trend of the next gen graphics APIs, it seems
unlikely that this becomes ARB or core.
v2: Remove a few "openvg" references left, per Emil Velikov.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
v3: Update release notes.
Largely superseeded by src/egl, and
WGL/GLX_EXT_create_context_es_profile extensions.
Note this will break Android.mk with gallium drivers -- somebody
familiar with that build infrastructure will need to update it to use
gallium drivers through egl_dri2.
v2: Remove the _EGL_BUILT_IN_DRIVER_GALLIUM define from
src/egl/main/Android.mk; and update the src/egl/main/Sconscript to
create a SharedLibrary, add versioning, create symlink - copy the bits
from egl-static, per Emil Velikov.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
v3: Disallow undefined symbols in libEGL.so. Update release notes
This classic driver is so far behind Gallium softpipe/llvmpipe based
one, that's hard to imagine ever being useful.
v2: Drop drivers/windows from src/mesa/Makefile.am:EXTRA_DIST per Emil
Velikov.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
v3: Update release notes.
Requires Evergreen/Cayman and radeon kernel module
2.41.0 or newer.
Expected piglit fails due to hardware limitations:
* arb_draw_indirect-draw-arrays-prim-restart
Restarts not applied for DrawArrays commands
* arb_draw_indirect-vertexid
Base vertex offset is not included in vertex id
Marek: bump vgt_state num_dw by 3 (= space needed for one register write)
Signed-off-by: Glenn Kennard <glenn.kennard@gmail.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
NOTE: The implementation was initially one patch, this. All the history is kept
here, even though all the core mesa changes were moved to the parent of this
patch.
This patch implements ARB_pipeline_statistics_query. This addition to GL does
not add a new API. Instead, it adds new tokens to the existing query APIs. The
work to hook up the new tokens is trivial due to it's similarity to the previous
work done for the query APIs. I've implemented all the new tokens to some
degree, but have stubbed out the untested ones at the entry point for Begin().
Doing this should allow the remainder of the code to be left in.
The new tokens give GL clients a way to obtain stats about the GL pipeline.
Generally, you get the number of things going in, invocations, and number of
things coming out, primitives, of the various stages. There are two immediate
uses for this, performance information, and debugging various types of
misrendering. I doubt one can use these for debugging very complex applications,
but for piglit tests, it should be quite useful.
Tessellation shaders, and compute shaders are not addressed in this patch
because there is no upstream implementation. I've implemented how I believe
tessellation shader stats will work for Intel hardware (though there is a bit of
ambiguity). Compute shaders are a bit more interesting though, and I don't yet
know what we'll do there.
For the lazy, here is a link to the relevant part of the spec:
https://www.opengl.org/registry/specs/ARB/pipeline_statistics_query.txt
Running the piglit tests
http://lists.freedesktop.org/archives/piglit/2014-November/013321.html
(http://cgit.freedesktop.org/~bwidawsk/piglit/log/?h=pipe_stats)
yield the following results:
> piglit-run.py -t stats tests/all.py output/pipeline_stats
> [5/5] pass: 5 Running Test(s): 5
v2:
- Don't allow pipeline_stats to be per stream (Ilia). This may (not sure) be
needed for AMD_transform_feedback4, which we do not support.
> If AMD_transform_feedback4 is supported then GEOMETRY_SHADER_PRIMITIVES_-
> EMITTED_ARB counts primitives emitted to any of the vertex streams for
> which STREAM_RASTERIZATION_AMD is enabled.
- Remove comment from GL3.txt because it is only used for extensions that are
part of required versions (Ilia)
- Move the new tokens to a new XML doc instead of using the main GL4x.xml (Ilia)
- Add a fallthrough comment (Ilia)
- Only divide PS invocations by 4 on HSW+ (Ben)
v3:
- Add ARB_pipeline_statistics_query to relnotes.html
- Add ARB_pipeline_statistics_query.xml to the Makefile.am, and master XML (Ilia)
- Correct extension number (Ilia)
- Add link to xml in the main GL API xml (Ilia)
- remove special GS case from gen6_end_query (Ian)
- Make lookup table static so gcc doesn't initialized it on every call (Ian)
- Use if (_mesa_has_geometry_shaders(ctx)) instead of explicit checks (Ian)
- Core mesa parts moved into a prep patch (Ilia)
v4:
- Change to 10.6 relnotes since we missed 10.5 window
- Moved compute shader stuff into the switch statement (Jordan)
- Jordan: Add compute shader support
v5:
- Fixed relnote style (Ilia)
v6:
- Rebased on master which beat me to adding the first relnotes - essentially
this undoes v5 (which had a typo anyway)
- Some code style fixes (Ken)
- Remove some excess comments (Ken)
- Unify tessellation failure style - unreachable (Ken)
- Fix workaround comment for PS invocations (Ken)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Replace the hard-coded 0's with the context clamp value.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
A student was wondering what was going on + I started working on it too.
CC: Laura Ekstrand <laura@jlekstrand.net>
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Laura Ekstrand <laura@jlekstrand.net>
Signed-off-by: Fredrik Höglund <fredrik@kde.org>
It is now a hard dependency because of the autogeneration of
format pack and unpack functions.
Update the documentation to reflect this change.
v2:
- Inline python script in m4 file and use PYTHON2
v3:
- Remove semicolons and quotes and change coding style
- Add Ilia Mirkin suggestion to use Python's split functionality.
- Use AX_CHECK_PYTHON_MAKO_MODULE name.
- Change to MIT license
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
The table contains all the relevant information about each format. The
helper functions now just do lookups in the table.
Note that this adds support for a lot of formats that were previously
unsupported. Additionally it adds disabled support for integer render
buffers, which will require more work to actually enable.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robclark@freedesktop.org>
Right now, in mesamatrix.net, the footnote is set so that it seems to be
for all the features, while actually it only applies to MSAA.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Caveat: Shaders using UBO/sampler indexing will
not be optimized by SB, due to SB not currently
supporting the necessary CF_INDEX_[01] index
registers.
Signed-off-by: Glenn Kennard <glenn.kennard@gmail.com>
Gallium should be prepared fine for ARB_clip_control.
So enable this and mention it in the release notes.
v2:
Only enable for drivers announcing the freshly introduced
PIPE_CAP_CLIP_HALFZ capability.
v3:
Use extension enable infrastructure to connect PIPE_CAP_CLIP_HALFZ
with ARB_clip_control.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Froehlich <Mathias.Froehlich@web.de>