v2: lots of improvements
This is like identity or trace, but simpler. It doesn't wrap most states.
Run with:
GALLIUM_DDEBUG=1000 [executable]
where "executable" is the app and "1000" is in miliseconds, meaning that
the context will be considered hung if a fence fails to signal in 1000 ms.
If that happens, all shaders, context states, bound resources, draw
parameters, and driver debug information (if any) will be dumped into:
/home/$username/dd_dumps/$processname_$pid_$index.
Note that the context is flushed after every draw/clear/copy/blit operation
and then waited for to find the exact call that hangs.
You can also do:
GALLIUM_DDEBUG=always
to do the dumping after every draw/clear/copy/blit operation without
flushing and waiting.
Examples of driver states that can be dumped are:
- Hardware status registers saying which hw block is busy (hung).
- Disassembled shaders in a human-readable form.
- The last submitted command buffer in a human-readable form.
v2: drop pipe-loader changes, drop SConscript
rename dd.h -> dd_pipe.h
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
This allows creating compute-only and debug contexts.
Reviewed-by: Brian Paul <brianp@vmware.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
This works if drivers upsample on upload (like all radeon ones do).
The alternative is an unexpected GL error from anything calling
_mesa_update_state and possibly other issues.
Cc: 10.6 11.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Otherwise we get:
warning: 'num_user_sgprs' may be used uninitialized in this function
...
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Patch refactors existing parameters check to first check common enums
between desktop GL and GLES 3.1 and modifies get_tex_level_parameter_image
to be compatible with enums specified in 3.1.
v2: remove extra is_gles31() checks (suggested by Ilia)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com> (v1)
Reviewed-by: Marta Lofstedt <marta.lofstedt@intel.com> (v1)
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
According to OpenGL ES specification section 7.12,
GL_COMPUTE_WORK_GROUP_SIZE, is supported by the
glGetProgramiv function.
Signed-off-by: Marta Lofstedt <marta.lofstedt@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
According to the OpenGL ES 3.1 specification chapter 17, the
MAX_COMPUTE_WORK_GROUP_COUNT and MAX_COMPUTE_WORK_GROUP_SIZE
is available for glGetIntegeri_v.
Signed-off-by: Marta Lofstedt <marta.lofstedt@linux.intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
commit 26c549e69d
Author: Nanley Chery <nanley.g.chery@intel.com>
Date: Fri Jul 31 10:26:36 2015 -0700
mesa/formats: remove compressed formats from matching function
caused a regression in my CTS testing, this looks like a clear
thinko.
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
sSigned-off-by: Dave Airlie <airlied@redhat.com>
I used this as some testing ground for investigating some compiler
bits initially (e.g. lrint calls etc.), figured I could do much better
in the end just for fun...
This is mathematically equivalent, but uses some tricks to avoid
doubles and also replaces some float math with ints. Good for another
performance doubling or so. As a side note, some quick tests show that
llvm's loop vectorizer would be able to properly vectorize this version
(which it failed to do earlier due to doubles, producing a mess), giving
another 3 times performance increase with sse2 (more with sse4.1), but this
may not apply to mesa.
No piglit change.
Acked-by: Marek Olšák <marek.olsak@amd.com>
This code (lifted straight from the extension) was doing things the most
inefficient way you could think of.
This drops some of the more expensive float operations, in particular
- int-cast floors (pointless, values always positive)
- 2 raised to (signed) integers (replace with simple exponent manipulation),
getting rid of a misguided comment in the process (implement with table...)
- float division (replace with mul of reverse of those exponents)
This is like 3 times faster (measured for float3_to_rgb9e5), though it depends
(e.g. llvm is clever enough to replace exp2 with ldexp whereas gcc is not,
division is not too bad on cpus with early-exit divs).
Note that keeping the double math for now (float x + 0.5), as the results may
otherwise differ.
Acked-by: Marek Olšák <marek.olsak@amd.com>
GetTexImage can read to stencil8 but only from
a stencil or depthstencil textures.
This fixes a bunch of failures in CTS
GL33-CTS.gtf32.GL3Tests.packed_pixels
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Cc: "11.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Enables _mesa_target_can_be_compressed to return the appropriate GL error
depending on it's inputs. Use the parameter to return the appropriate GL error
for ETC2 formats on GLES3.
Suggested-by: Chad Versace <chad.versace@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
All compressed formats return GL_FALSE and there isn't any evidence to
support that this behaviour would change. Remove all switch cases for
compressed formats.
v2. Since the exhaustive switch is removed, add a gtest to ensure
all formats are handled.
v3. Ensure that GL_NO_ERROR is set before returning.
v4. Fix an arg to _mesa_uncompressed_format_to_type_and_comps();
fix formatting and misc improvements (Chad).
Reviewed-by: Chad Versace <chad.versace@intel.com>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
We currently check that our format info table is sane during context
initialization in debug builds. Perform this check during
`make check` instead. This enables format testing in release builds
and removes the requirement of an exhuastive switch for
_mesa_uncompressed_format_to_type_and_comps().
v2. indentation and conditional inclusion fixes (Chad).
allow tests to continue running if any format fails
and display the failing format name.
Reviewed-by: Chad Versace <chad.versace@intel.com>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
I intend to remove nir_builder::cf_node_list, so I can't have this code
poking at it directly. The proper way is to set the insertion point and
then simply insert things there.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
I intend to remove nir_builder::cf_node_list, so I can't have this code
poking at it directly. The proper way is to set the insertion point and
then simply insert things there.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
This makes it easy for NIR passes to inspect what kind of shader they're
operating on.
Thanks to Michel Dänzer for helping me figure out where TGSI stores the
shader stage information.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
The comment above move_uniform_array_access_to_pull_constants was
completely bogus because it has nothing to do with lowering instructions.
Instead, it's assiging locations of pull constants.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Previously, we treated the entire UNIFORM file as if it had two elements:
One for direct things and one for indirect. This is substantially
different from how the old visitor code handled it where each element was
effectively its own uniform. This commit makes the NIR path more like the
old ir_visitor path where each uniform is separate. This should allow us
to more easily make decisions about what to push.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
In the i965 backend, we want to be able to "pull apart" the uniforms and
push some of them into the shader through a different path. In order to do
this effectively, we need to know which variable is actually being referred
to by a given uniform load. Previously, it was completely flattened by
nir_lower_io which made things difficult. This adds more information to
the intrinsic to make this easier for us.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Previously, there were four type_size() functions in play - the i965
compiler backend defined scalar and vec4 type_size() functions, and
nir_lower_io contained its own similar functions.
In fact, the i965 driver used nir_lower_io() and then looped over the
components using its own type_size - meaning both were in play. The
two are /basically/ the same, but not exactly in obscure cases like
subroutines and images.
This patch removes nir_lower_io's functions, and instead makes the
driver supply a function pointer. This gives the driver ultimate
flexibility in deciding how it wants to count things, reduces code
duplication, and improves consistency.
v2 (Jason Ekstrand):
- One side-effect of passing in a function pointer is that nir_lower_io is
now aware of and properly allocates space for image uniforms, allowing
us to drop hacks in the backend
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
v2 Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
If there are no parameters, we don't need to create a nir_variable to
hold them...and allocating an array of length 0 is pretty bogus.
Should avoid i965 backend assertions in future patches Jason and I are
working on.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
I want to use C function pointers to these, and they don't use anything
in the visitor classes anyway.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
This way they don't implicitly increment the uniforms variable and don't
have to be called in-sequence during uniform setup.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The commit:
commit b49371b8ed
Author: Connor Abbott <cwabbott0@gmail.com>
AuthorDate: Tue Jul 21 19:54:18 2015 -0700
nir: move control flow modification to its own file
split out some control flow related APIs into a separate header, but did
not update drivers.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
The commit:
commit 8e0d4ef341
Author: Kenneth Graunke <kenneth@whitecape.org>
AuthorDate: Thu Aug 6 18:18:40 2015 -0700
nir: Delete the nir_function_impl::start_block field.
removed the start_block field without fixing up drivers..
Signed-off-by: Rob Clark <robclark@freedesktop.org>
This fixes GL45-CTS.gtf44.GL31Tests.texture_stencil8.texture_stencil8_gl44
from the ogl conform suite.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: 10.6 11.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Connor introduced this helper recently; we should use it here too.
I had to move the function earlier in the file for it to be available.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
This gives us some testing of it. Also, the old nir_cf_node_remove()
wasn't handling phi nodes correctly and was calling cleanup_cf_node()
too late.
Signed-off-by: Connor Abbott <connor.w.abbott@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
These will help us do a number of things, including:
- Early return elimination.
- Dead control flow elimination.
- Various optimizations, such as replacing:
if (foo) {
...
}
if (!foo) {
...
}
with:
if (foo) {
...
} else {
...
}
Signed-off-by: Connor Abbott <connor.w.abbott@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This is a helper that will be shared between the new control flow
insertion and modification code.
Signed-off-by: Connor Abbott <connor.w.abbott@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
For now, it allows us to refactor the control flow insertion API's so
that there's a single entrypoint (with some wrappers). More importantly,
it will allow us to reduce the combinatorial explosion in the extract
function. There, we need to specify two points to extract, which may be
at the beginning of a block, the end of a block, or in the middle of a
block. And then there are various wrappers based off of that (before a
control flow node, before a control flow list, etc.). Rather than having
9 different functions, we can have one function and push the actual
logic of determining which variant to use down to the split function,
which will be shared with nir_cf_node_insert().
In the future, we may want to make the instruction insertion API's as
well as the builder use this, but that's a future cleanup.
Signed-off-by: Connor Abbott <connor.w.abbott@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
When we insert a single basic block A into another basic block B, we
will split B into C and D, insert A in the middle, and then splice
together C, A, and D. When we splice together C and A, we need to move
the successors of A into C -- except A has no successors, since it
hasn't been inserted yet. So in move_successors(), we need to handle the
case where the block whose successors are to be moved doesn't have any
successors. Fixing link_blocks() here prevents a segfault and makes it
work correctly.
Signed-off-by: Connor Abbott <connor.w.abbott@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We may delete a control flow node which contains structured jumps to
other parts of the program. We need to remove the jump as a predecessor,
as well as remove any phi node sources which reference it. Right now,
the same problem exists for blocks that don't end in a jump instruction,
but with the new API it shouldn't be an issue, since blocks that don't
end in a jump must either point to another block in the same extracted
CF list or not point to anything at all.
Signed-off-by: Connor Abbott <connor.w.abbott@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Unlike calling nir_instr_remove(), calling nir_cf_node_remove() (and
later in the series, the nir_cf_list_delete()) implies that you're
removing instructions that may still have uses, except those
instructions are never executed so any uses will be undefined. When
cleaning up a CF node for deletion, we must clean up any uses of the
deleted instructions by making them point to undef instructions instead.
Signed-off-by: Connor Abbott <connor.w.abbott@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
In particular, handle the case where the earlier block ends in a jump
and the later block is empty. In that case, we want to preserve the jump
and remove any traces of the later block. Before, we would only hit this
case when removing a control flow node after a jump, which wasn't a
common occurance, but we'll need it to handle inserting a control flow
list which ends in a jump, which should be more common/useful.
Signed-off-by: Connor Abbott <connor.w.abbott@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Marek Olšák
Ilia Mirkin
Grazvydas Ignotas
Tapani Pälli
Marta Lofstedt
Dave Airlie
Roland Scheidegger
Nanley Chery
Kenneth Graunke
Jason Ekstrand
Rob Clark
Brian Paul
Connor Abbott