Just run some selected tests for now because we miss a lot of
functionality, which would cause so many crashes that the runs
aren't practical.
Once the core functionality is implemented, we can switch to the master
case list with skips.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13016>
Add deqp gles2 CI run for GC2000.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12852>
Makes it possible to use e.g. a ser2net server in the lan.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12852>
Build the kernel with CONFIG_DRM_ETNAVIV=y and include
imx6q-cubox-i.dtb.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12852>
* Refactor timeouts and retry attempts constants to variables in the top
of the python script.
* Increase LAVA job timeout value from 1 minute to 5 minutes, since the
timeout detection is just a heuristic based on the log silence in LAVA
devices. If we keep 1 minute timeout, maybe we could cancel jobs that
have tasks which may take too long to respond. Also, one minute
timeout is prone to misdetect scenarios when some network errors or
slowness may happen.
* Increase polling rate to check if the job has started from 1 check
every 30 seconds to 1 check every 10 seconds. Since it was taking 30
seconds in the worst case to start to get the log output from a LAVA
job. It is important to note that some LAVA jobs take less than 2
minutes to finish, so a 10 second wait would be more suitable in those
cases.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12870>
In addition to a global skip list introduced in
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11333
(enabled by
https://gitlab.freedesktop.org/anholt/deqp-runner/-/merge_requests/4)
it is also useful to have a per-driver skip list in addition to a
per-gpu list. Now, there are multiple levels at which skips can be
specified, from least to most specific,
- (deqp|piglit)-all-skips.txt :: affecting all tests
- (deqp|piglit)-$(DRIVER_NAME|VK_DRIVER|GALLIUM_DRIVER)-skips.txt ::
affecting the specified driver
- (deqp|piglit)-$GPU_VERSION-skips.txt :: affecting a specific GPU
This idea could be useful for -fails.txt as well.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Martin Peres <martin.peres@mupuf.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11426>
VK-CTS v1.2.7.0 has buggy tests that only work if DRM support is
available for them (drm_files_exist). This isn't exposed in the Mesa
CI by other farms, because their infra installs libdrm-dev as part
of either rootfs generation for freedreno/broadcom or respective
container stages (for lava). In the case of radv, we directly use the
x86 Mesa testing containers, so we are the odd ones out here.
By moving the building of the custom libdrm above the building of
vk-gl-cts, it will compile in support required for this test to pass,
ensuring the x86_test-vk container has the right dependencies to match
the rest of the CI. Lava actually installs drm development files
twice, once from the Debian repos, which vk-gl-cts then compiles
against, and a second time from a tarball, which the tests will use at
runtime. Seemed a little cleaner to use the version of libdrm
specified in the Mesa CI, and hence used at both build time and
runtime.
A bug should be raised with the testsuite to avoid this in the future,
but we should probably have libdrm development files exposed for these
components anyway.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Martin Peres <martin.peres@mupuf.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12777>
Besides the sed being broken for some trace names, now we have all
needed information in the artifacts so the dashboard isn't needed.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12675>
Brings in these changes:
99be1b06ff36 framework/replay: Display the image differences if any
3074b9c72b3d glsl-predication-on-large-array: Test predication on values from large array
c97da22d35b4 cmake: Fix gbm test compiling
0cbccd68c3c1 piglit: Find our data directory when we're invoked through a symlink
4eb71fc10bbe arb_sso: add test that has explicit locations and array fields in ifc
fa9c82380273 glsl-1.30: test shadow var in a switch
aa7f042b0417 glsl-1.30: add tests for incorrect "compare to 0" optimizations
60138ef32ec1 add explicit tests for GetFragDataLocation/Index(gl_Frag*)
4a8806696b90 egl: add test for EGL_KHR_display_reference
d6b7053b4e52 glsl-1.30: test that switch expression is evaluated once
8023a3c945c3 arb_shader_storage_buffer_object: Require extension on the new test
8820cac60827 pbobench: Fix sometimes-uninitialized warning.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12675>
Add a time.sleep call between proxy.scheduler.jobs.logs calls, since
they do not block. This will relieve some request pressure on LAVA
dispatchers.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12797>
According to ARB_tbo spec, default format is LUMINANCE8, but according
to core spec, it is R8.
This fixes piglit's spec@arb_texture_buffer_object@get test with drivers
supporting ARB_tbo spec but OpenGL/ES < 3.1.
v2:
- Compare against compat profile (Ilia)
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12774>
I'd like to support EGL on Windows, using the same architecture as Linux.
On Linux, libgallium_dri.so is a "megadriver," containing the Mesa Gallium
state tracker, plus the actual driver implementations.
Now, on Windows, libgallium_wgl.dll is a proper OpenGL ICD, and OpenGL32.dll
is just a stub DLL which implements the wgl* APIs in terms of that ICD.
This is the more "architecturally clean" way to share the state tracker
between EGL and WGL.
Reviewed By: Bill Kristiansen <billkris@microsoft.com>
Reviewed-by: Charmaine Lee >charmainel@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12677>
... before changing the PM settings.
Otherwise, we hit a kernel warning in Qualcomm devices and the device is
left in a non-functional state.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12644>
Use Piglit's replay profile to measure and store the time that frames
take to render in the GPU.
This job won't run automatically in regular pipelines, but will be
triggered automatically by a script for every successful pre-merge
pipeline.
This is because we want to generate performance data for every relevant
commit merged in main, but we don't want to keep a device busy during
the pre-merge run.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12236>
Using suites makes load-balancing our jobs much easier, keeps the CPU busy
handling the a630_gles_others.sh test sets (and improves the output and
baseline handling for them), and makes it trivial to add in more short
test sets.
a306: still 5 jobs, and we add KHR-GLES2 (KHR-GLES3 is unstable)
a530: still 5 jobs, added KHR-GLES*
a630_gl: 5 jobs becomes 4, and we add KHR-GLES*
a630_vk: still 3 jobs, now 1/3 of all VK instead of 1/4.
a630_vk_full: still 2 jobs, now includes full bypass testing, partial
no-force testing, and testing of pre-merge-skipped tests.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12256>
Enable CI for lima again on meson-gxl-s805x-libretech-ac boards
with Mali-450.
These boards are managed by a LAVA instance and so follow the LAVA CI
workflow in Mesa.
The goal is to have coverage for deqp-gles2, as lima is a GLES2-only
driver.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11789>
As we aren't testing LLVMPipe in these jobs, and shader compilation is
currrently the bottleneck.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12196>
Sometimes, the VM powered off before all the output from the guest got
to the console.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12196>
Crosvm deals with virtio-gpu commands sequentially, so parallelization
in the host doesn't help much.
Also, too much parallelization in the guest causes some tests to time
out.
So reduce the number of dEQP instances being run concurrently, make sure
we dont limit the number of CPUs being used in the host and schedule
more jobs in CI to keep the times below 10 minutes.
Closes: #5172
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12196>
Rather surprisingly, the value stored in the NumVectors field of the
DXIL PSV header isn't the number of vectors, but rather the *maximum*
vector used.
This makes a difference when we're not writing to the first element of
an array, where we would previously generate a validation error.
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12197>
Use Piglit's replay profile to measure and store the time that frames
take to render in the GPU.
This job won't run automatically in regular pipelines, but will be
triggered automatically by a script for every successful pre-merge
pipeline.
This is because we want to generate performance data for every relevant
commit merged in main, but we don't want to keep a device busy during
the pre-merge run.
Signed-off-by: Antonio Caggiano <antonio.caggiano@collabora.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12185>
Brings in duplicate subtest fixes, gpu_shader4 tests, and more. This
shuffles the radeonsi fractional test run, so we get to catch up with more
failing subtests.
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12110>
Everyone can get artifacts now. Let's make those artifacts useful.
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12110>
The deqp-runner "suite" support lets us specify all the deqp variants at
once and shard them across gitlab jobs, so we reduce docker overhead and
get fewer jobs to review the output of.
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12110>
Allows to use virtio-gpu to actually test the virgl driver.
Signed-off-by: Corentin Noël <corentin.noel@collabora.com>
Acked-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11320>
Also require newer dependencies.
This makes it easier to debug possible crosvm issues as a big refactor occured since the
previous commit included in the CI.
Signed-off-by: Corentin Noël <corentin.noel@collabora.com>
Acked-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11320>
We need a newer Rust toolchain to be able to build the latest crosvm.
Signed-off-by: Corentin Noël <corentin.noel@collabora.com>
Acked-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11320>
We are only using the result once so we spend more time optimizing it than
actually using it.
Signed-off-by: Corentin Noël <corentin.noel@collabora.com>
Reviewed-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11320>
Now that we've disabled brilinear and have per-pixel cube derivatives, we
can use the same rendering paths that end users will see.
In a few cases, we switch to the no_quad_lod option instead, because
otherwise we get a piglit failure.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12125>
v2:
- Read mustpass files from vk-default.txt (Matt)
- Remove freedreno atomic geom tests from fail list (Emma)
- Move freedreno flake to separated line (Emma)
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12069>
GitLab doesn't merge the rules array from a job that is extended, so we
were missing the changes rules.
To avoid this, create a .freedreno-rules-restricted job that includes
the changes rules and the restricted user checks.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Fixes: 92f9141f00 ("ci/freedreno: Test with non-redistributable traces")
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/5139
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12122>