And correct implementation to specify only what we support.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Coverity caught the use of dead code copy-paste for
found_colors[] and num_found_colors.
CID: 1341850
Signed-off-by: Rhys Kidd <rhyskidd@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
We're already verified that 'window' wasn't NULL, I'm guessing this
allocation error is about the newly created queue.
CID: 1409754
Fixes: 03dd9a88b0 ("egl/wayland: Use per-surface event queues")
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
APPLE_vertex_array_object support was removed in 7927d0378f.
However it turns out we can't remove the functions because this
can cause issues when libglapi is used together with DRI
drivers built prior to said commit
Fixes: 7927d0378f ("mesa: drop APPLE_vertex_array_object support")
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Potentially more efficient as it may avoid the struct being initialised
twice.
Also add var to the initialisation list while we are here.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
If the str is long or isn't null-terminated, strlen() could take a lot
of time or even crash. I don't know why was it used in the first place,
maybe for platforms without strnlen(), but strnlen() is already used
inside of ralloc_strndup(), so this change should not additionally
break anything.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Overwhelming majority of shaders don't use line continuations. In my
shader-db only shaders from the Talos Principle and Serious Sam used
them, less than 1% out of all shaders. Optimize for this case, don't
do any copying if no line continuation was found.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
strcmp() is slow. Initiate comparison with "__LINE__" or "__FILE__"
only if the identifier starts with '_', which is rare.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This is shorter and easier on the eyes. At the same time this
also ensures that we are always asserting that the table pointer
is not NULL. Currently that was not done for all situations.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Use our knowledge that pointers are at least 4 byte aligned to remove
the useless digits. Then shift by 6, 10, and 14 bits and add this to
the original pointer, effectively folding in the entropy of the higher
bits of the pointer into a 4-bit section. Stopping at 14 means we can
add the entropy from 18 bits, or at least a 600Kbyte section of memory.
Assuming that ralloc allocates from a linearly allocated heap less than
this we can make a very efficient pointer hashing function for our usecase.
Even if we are not on an architecture that is 4 byte aligned, there is
still a high big chance that the thing we are allocating is at least
8 bytes in size, so even then we will have entropy into the third bit.
The 4 bit increment on the shifts is chosen rather arbitrarily; if we
had chosen a 3 bit increment we would need to add another xor to
cover a decently sized memorypool. Increasing it to 5 bits would
spread our entropy more, possibly hurting us with more collisions on
hash tables of size less than 32. With a hash table of size 16 there
are a max of 11 entries, and we can assume that with such a small table
collisions are not that painfull.
This allows us to hash the whole 32 or 64 bit pointer at once,
instead of running FNV1a, looping through each byte and doing
increments, decrements, muls, and xors on every byte. This cuts
_mesa_hash_data from 1.5 % on profiles, to making _mesa_hash_pointer
show up with a 0.09% share. Collisions on insertion actually seems to be
ever so slightly lower with this hash function, as found by printing
a loop counter and sorting the data.
perf stat shows a 1.5% reduction in instruction count,
and a 5% reduction in stalled cycles. Shader-db runtime goes
from 225 to 220 seconds.
No instruction-count changes in shader-db, but there are some minor
changes in cycle-count that is likely caused by nir walking a set
in some of its passes, and this causing a different ordering.
That might eventually lead to a difference in register allocation.
However, the effect is a net positive;
total cycles in shared programs: 24739550 -> 24738482 (-0.00%)
cycles in affected programs: 374468 -> 373400 (-0.29%)
helped: 178
HURT: 49
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Before the swapchain event queue is destroyed, all proxy objects that reference
it must be dropped. Otherwise we risk a use-after-free if a frame callback event
or buffer release events are received afterwards.
This happens when an application destroys and recreates a swapchain in FIFO
mode between two frames without using the VkSwapchainCreateInfoKHR::oldSwapchain
mechanism to keep the old swapchain until after the next redraw.
Fixes: 5034c61558 ("vulkan/wsi/wayland: Use proxy wrappers for swapchain")
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Cc: mesa-stable@lists.freedesktop.org
This fixes the long-standing problem with Dying Light where the game would
produce a black screen when running under Mesa. This happened because the
game's vertex shaders redeclare gl_VertexID, which is a GLSL builtin.
Mesa's GLSL compiler is a little more strict than others, and would not
compile them:
error: `gl_VertexID' redeclared
The allow_glsl_builtin_variable_redeclaration directive allows the shaders
to compile and the game to render. The game also requires OpenGL 4.4+ (GLSL
440), but does not request it explicitly. It must be forced with an
override, such as MESA_GL_VERSION_OVERRIDE=4.5 and
MESA_GLSL_VERSION_OVERRIDE=450. A compatibility context is *not* required
and forcing one with 4.5COMPAT or allow_higher_compat_version results in
graphical artifacts.
Dead Island Definitive Edition is another Techland port on the same engine
with the same problems, so we set the
allow_glsl_builtin_variable_redeclaration option for that game as well.
v2 (Samuel Pitoiset):
- Rename allow_glsl_builtin_redeclaration ->
allow_glsl_builtin_variable_redeclaration
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96449
Signed-off-by: John Brooks <john@fastquake.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This option will allow GLSL builtins to be redeclared verbatim (e.g.
redeclaring "in int gl_VertexID" in a vertex shader). This is not strictly
valid and would normally fail to compile, but some applications (such as
newer Techland ports) do it and need more leniency.
v2 (Samuel Pitoiset):
- Rename allow_glsl_builtin_redeclaration ->
allow_glsl_builtin_variable_redeclaration
Signed-off-by: John Brooks <john@fastquake.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
The previous condition was to clear it out if it had previously been
set, not what's in the current draw. That information is gone now, so
just clear it unconditionally.
Fixes: 330d0607e ("gallium: remove pipe_index_buffer and set_index_buffer")
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Use a user-buffer-aware cleanup function.
Fixes: c24c3b94ed ("gallium: decrease the size of pipe_vertex_buffer - 24 -> 16 bytes")
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
We can easily use the upload BO for push constants on Gen7.5/Gen8 too,
at the cost of a relocation when emitting 3DSTATE_CONSTANT_XS. We can
simply switch to using constant buffer pointer 2 instead of pointer 0,
like we do on Gen9+.
Ivybridge and Baytrail can't do this trick because they require the
constant buffers to be enabled in order, starting with 0. We'd have
to set the INSTPM bit to make the constant buffer pointer not relative
to dynamic state base address, which would need kernel command parser
support.
Improves performance in GLBenchmark 2.7/TRex Offscreen by:
- Broadwell GT2: 0.305608% +/- 0.19877% (n = 68)
- Braswell: No difference proven (n = 742)
- Haswell GT3e: 0.180755% +/- 0.0237505% (n = 30)
Reviewed-by: Chris Forbes <chrisforbes@google.com>
Shaders can use quite a bit of uniform data. Better to put it in the
upload buffers, like we do for client vertex data, rather than the
batch buffer state area, which is primarly used for indirect state.
This should free up batch space, allowing us to emit more commands in a
batch before flushing. Because BRW_NEW_BATCH also causes a lot of state
to be re-emitted, it may also reduce CPU overhead a little bit.
We took this approach on Gen4-5, but switched to using the batch area
on Gen6+ because buffer 0 is relative to Dynamic State Base Address by
default, which is set to the start of the batch.
On Gen9+, we already use a relocation due to a workaround, so this is
trivial to change and has basically no downside.
Unfortunately we can't change compute shader push constants because
MEDIA_CURBE_LOAD always uses an offset from dynamic state base address.
Improves performance in GLBenchmark 2.7/TRex Offscreen by:
- Skylake GT4e: 0.52821% +/- 0.113402% (n = 190)
- Apollolake: 0.510225% +/- 0.273064% (n = 70)
Reviewed-by: Chris Forbes <chrisforbes@google.com>
I don't think CS push constant uploading uses the section of L3
controlled by 3DSTATE_PUSH_CONSTANT_ALLOC_XS. So I don't think
it needs to be re-emitted when that space is reallocated.
The programming note in gen7_allocate_push_constants doesn't
indicate this is necessary, at least.
Reviewed-by: Chris Forbes <chrisforbes@google.com>
The instruction encodings only allow for immediates. Don't try to
replace a zero (which is dumb to have in that op in any case) with RZ.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
Just like is done on desktop and what is expected by the build-id code.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Former is not a thing, even if I have a hacked xcb-fixes.pc on my system.
Thanks for spotting it Mark!
Fixes: 9a90d6a9d4 ("configure.ac: add xcb-fixes to the XCB DRI3 list")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
The XCB module is used by the VL targets. Thus omitting it can lead to
link-time errors due to unresolved symbols.
Other DRI3 users such as the Vulkan WSI and the dri3 loader helper do
not use an update region in their xcb_present_pixmap() call. We will
look into that at a later stage.
Fixes: acf3d2afab ("configure: check once for DRI3 dependencies")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101110
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
As gen_builder.hpp file is generated, it contains information that is
specific to the LLVM version it originates from.
As suggested by Tim, the file seems to be forwards compatible. So in
order to produce ship a file which will work everywhere we should be
using earlies supported LLVM - 3.9.
With this we're back on track and can build all of mesa without
python/mako/flex and friends.
In the long term we might want to see if the python generators can be
updated to produce LLVM version agnostic files. At least within the
range supported by SWR.
Cc: <mesa-stable@lists.freedesktop.org>
Cc: Chuck Atkins <chuck.atkins@kitware.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tim Rowley <timothy.o.rowley@intel.com>
When we fallback currently the gl_program objects are re-allocated.
This is likely to change when the i965 cache lands, but for now
this fixes a crash when using MESA_GLSL=cache_fb. This env var
simulates the fallback path taken when a tgsi cache item doesn't
exist due to being evicted previously or some kind of error.
Unlike i965 we are always falling back at link time so it's safe to
just re-allocate everything. We will be unnecessarily freeing and
re-allocate a bunch of things here but it's probably not a huge deal,
and can be changed when the i965 code lands.
Fixes: 0e9991f957 ("glsl: don't reference shader prog data during cache fallback")
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
For the gallium state tracker a tgsi binary may have been evicted
from the cache to make space. In this case we would take the
fallback path and recompile/link the shader.
On i965 there are a number of reasons we can get to the program
upload stage and have neither IR nor a valid cached binary.
For example the binary may have been evicted from the cache or
we need a variant that wasn't previously cached.
This environment variable enables us to force the fallback path that
would be taken in these cases and makes it easier to debug these
otherwise hard to reproduce scenarios.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This will explicitly state that we are following the fallback
path when we find invalid/corrupt cache items. It will also
output the fallback message when the fallback path is forced
via an environment variable, the following patches will allow
this.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Previously we required --enable-egl for the platform selection to work.
Additionally due to the broken DRI3 dependency tracking we needed
--enable-glx.
Since both of these are now sorted now we no longer need the
workarounds.
While we're here, explicitly enable dri3.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
A bit pedantic patch to fool proof should someone start thinkering
without knowing what they do.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-and-Tested-by: Leo Liu <leo.liu@amd.com>
OMX and VA can optionally use the X11 DRI2/DRI3, thus we should link
only as required.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
The vl_*_screen_create API properly falls back to a NOP when we're
building without specific platforms. So the only thing we need is to
handle the lack of X11/Xlib.h and provide a dummy Display define.
Cc: <mesa-stable@lists.freedesktop.org>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
En route to a X11-less builds
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
It's been like this since the code was introduced.
Fixes: 86eb4131a9 (st/va: add headless support, i.e. VA_DISPLAY_DRM)
Cc: <mesa-stable@lists.freedesktop.org>
Cc: Julien Isorce <julien.isorce@gmail.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
... and make it const, since we shouldn't tinker with it.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Provide a dummy stub when the user has opted w/o said platform, thus
we can build the binaries without unnecessarily requiring X11/other
headers.
In order to avoid build and link-time issues, we remove the HAVE_DRI3
guards in the VA and VDPAU state-trackers.
With this change st/va will return VA_STATUS_ERROR_ALLOCATION_FAILED
instead of VA_STATUS_ERROR_UNIMPLEMENTED. That is fine since upstream
users of libva such as vlc and mpv do little error checking, let
alone distinguish between the two.
Cc: Leo Liu <leo.liu@amd.com>
Cc: Guttula, Suresh <Suresh.Guttula@amd.com>
Cc: mesa-stable@lists.freedesktop.org
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Vulkan supports only DRI3 enabled X11 platforms. Make it obvious,
should one consider building without it.
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Bas Nieuwenhuizen
Ian Romanick
Benedikt Schemmer
Marek Olšák
Rhys Kidd
Lionel Landwerlin
Timothy Arceri
Vladislav Egorov
Thomas Helland
Philipp Zabel
John Brooks
Ilia Mirkin
Kenneth Graunke
Tapani Pälli
Emil Velikov