libdrm is used in multiple places. Always check for it and set
have_libdrm. Each user can then check the variable.
This is useful when only EGL and DRI drivers are needed.
The idea is that DRI driver, libGL and libOSMesa are libraries that can
be independently enabled, yet --with-driver does not allow us to easily
do that, if not impossible. This also matches what
--enable-{egl,xorg,d3d1x} do for the respective libraries.
There are two libGL providers: Xlib-based and DRI-based. They cannot
coexist. To be able to choose between them, --enable-xlib-glx is also
added.
With this commit, --with-driver=dri can be replaced by
$ ./configure --enable-dri --enable-glx --disable-osmesa
--with-driver=xlib can be replaced by
$ ./configure --disable-dri --enable-glx --enable-osmesa \
--enable-xlib-glx
and --with-driver=osmesa can be replaced by
$ ./configure --disable-dri --disable-glx --enable-osmesa
Some combinations that cannot be supported with --with-driver will
produce errors at the moment. But in the future, we would like to
support, for example,
$ ./configure --enable-dri --disable-glx --enable-egl
(build libEGL and DRI drivers, but not libGL)
Note that this commit still keeps --with-driver for transitional
purpose.
All it's going to do is generate lots and lots and lots of
'warning: visibility attribute not supported in this configuration; ignored'
warnings
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
If --disable-gallium is passed, llvm-config isn't checked for, so mark
it explicitly as absent, through LLVM_CONFIG=no.
Passing --disable-gallium would result in:
| ../configure: line 9739: --version: command not found
| ../configure: line 9740: --cppflags: command not found
| ../configure: line 9741: --libs: command not found
| ../configure: line 9743: --ldflags: command not found
With this commit, one gets that instead:
| configure: error: LLVM is required to build Gallium R300 on x86 and x86_64
Signed-off-by: Cyril Brulebois <kibi@debian.org>
This removes all the --enable-gallium-$driver options and --disable-gallium.
Gallium can be disabled by --with-gallium-drivers= (without parameters).
Default is:
--with-gallium-drivers=r300,swrast
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
There is an obvious redundancy:
--with-driver=dri VS --with-state-trackers=dri
--with-driver=xlib VS --with-state-trackers=glx
--enable-openvg VS --with-state-trackers=vega
--enable-egl VS --with-state-trackers=egl
This patch adds two new options for the remaining state trackers:
--enable-xorg
--enable-d3d1x
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
- Based on the work of Себастьян Gliţa Κατινα <cglita@yahoo.com>
- Split Makefile.template into Makefile.defines and Makefile.targets
- Adapt other drivers to new situation
- Fixes https://bugs.freedesktop.org/show_bug.cgi?id=35441
Signed-off-by: Brian Paul <brianp@vmware.com>
Based uppon a patch from Pali Rohár <pali.rohar@gmail.com>.
This seems to get at least YUV->RGB conversion working.
So a simple "mplayer -vo vdpau" now seems to work fine.
Correctly links against selinux library when MESA is built with --enable-selinux option.
Fixes bug #36333 in Freedesktop bugzilla
Signed-off-by: Dave Airlie <airlied@redhat.com>
We only handle a 32 bit swap count, so use the new structure definitions.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
So --enable-texture-float it is.
Hardware drivers (including the Gallium ones) should
use #ifdef TEXTURE_FLOAT_ENABLED to hide any code that may
expose floating-point renderbuffers via any interface,
public or private.
v2: Print a warning when using --enable-texture-float.
Add Cygwin platform-specific settings and drivers to build for dri driver:
- by default, disable direct rendering.
- if direct rendering is enabled, the swrast dridriver is the only one it's
sensible to try to build (this doesn't work at the moment as additional patches
are required to build a libGL which can load just swrast without the DRM headers,
even though there's no actual functional dependency)
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Julien Cristau <jcristau@debian.org>
The Hurd kernel doesn't have DRM yet.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-By: Jakob Bornecrantz <wallbraker@gmail.com>
Fix build when configured --with-driver=dri --disable-driglx-direct on targets
without drm e.g. GNU/Hurd and Cygwin
Based on the Debian patch file '05_hurd-ftbfs.diff' by Samuel Thibault.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-By: Jakob Bornecrantz <wallbraker@gmail.com>
We need more and more of these, and it is difficult and prone to version
incompatability issues trying to single out every one of them.
This mimicks what was done in SCons.
This commit is basically a copy-over of the fix
Chia-I Wu's commited to wayland:
http://cgit.freedesktop.org/wayland/wayland-demos/commit/?id=1b6c0ed95
"Workaround an xcb-dri2 bug.
xcb_dri2_connect_device_name generated by xcb-proto 1.6 is broken.
It only works when the length of the driver name is a multiple of 4."
In my last commit I introduced a build dependency upon a new libdrm.
Add the associated autoconf checks. As the headers are part of the core
libdrm, we need to bump that version and so may as well bump the chipset
specific versions simultaneously.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Fix a typo which meant that --enable-shared-glapi didn't actually cause a shared glapi to be built
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
This an adds --enable-shared-dricore option to configure. When enabled,
DRI modules will link against a shared copy of the common mesa routines
rather than statically linking these.
This saves about 30MB on disc with a full complement of classic DRI
drivers.
v2: Only enable with a gcc-compatible compiler that handles rpath
Handle DRI_CFLAGS without filter-out magic
Build shared libraries with the full mklib voodoo
Fix typos
v3: Resolve conflicts with talloc removal patches
Signed-off-by: Christopher James Halse Rogers <christopher.halse.rogers@canonical.com>
When --enable-shared-glapi is specified, libGL will share libglapi with
OpenGL ES instead of defining its own copy of glapi. This makes sure an
app will get only one copy of glapi in its address space.
The new option is disabled by default. When enabled, libGL and libglapi
must be built from the same source tree and distributed together. This
requirement comes from the fact that the dispatch offsets used by these
libraries are re-assigned whenever GLAPI XMLs are changed.
For GLX, indirect rendering for has_different_protocol() functions is
tricky. A has_different_protocol() function is assigned only one
dispatch offset, yet each entry point needs a different protocol opcode.
It cannot be supported by the shared glapi. The fix to this is to make
glXGetProcAddress handle such functions specially before calling
_glapi_get_proc_address.
Note that these files are automatically generated/re-generated
src/glx/indirect.c
src/glx/indirect.h
src/mapi/glapi/glapi_mapi_tmp.h
Move _glapi_* symbols from libGLESv1_CM.so and libGLESv2.so to
libglapi.so. This makes sure an app will get only one copy of glapi in
its address space.
Note that with this change, libGLES* and libglapi must be built from the
same source tree and distributed together. This requirement comes from
the fact that the dispatch offsets used by these libraries are
re-assigned whenever GLAPI XMLs are changed.
With core mesa doing runtime API checks, GLES overlay is no longer
needed. Make --enable-gles-overlay equivalent to --enable-gles[12].
There may still be places where compile-time checks are done. They
could be fixed case by case.
If you want to enable noop set GALLIUM_NOOP=1 as an env variable.
You need first to enable noop wrapping for your driver see change
to src/gallium/targets/dri-r600/ in this commit as an example.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
st/egl should be enabled with --enable-openvg even the driver is xlib or
osmesa. Also, GLX_DIRECT_RENDERING should not be defined because libdrm
is not checked.
This driver is a fake swdri driver that perform no operations
beside allocation gallium structure and buffer for upper layer
usage.
It's purpose is to help profiling core mesa/gallium without
having pipe driver overhead hidding hot spot of core code.
scons file are likely inadequate i am unfamiliar with this
build system.
To use it simply rename is to swrast_dri.so and properly set
LIBGL_DRIVERS_PATH env variable.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Make autoconf decide the client APIs enabled first. Then when OpenGL
and OpenGL ES are disabled, there is no need to build src/mesa/; when
OpenGL is disabled, no $mesa_driver should be built. Finally, add
--enable-openvg to enable OpenVG.
With these changes, an OpenVG only build can be configured with
$ ./configure --disable-opengl --enable-openvg
src/mesa, src/glsl, and src/glx will be skipped, which saves a great
deal of compilation time.
And an OpenGL ES only build can be configured with
$ ./configure --disable-opengl --enable-gles-overlay
First, it changes autoconf to use a "python2" binary when available,
rather than plain "python" (which is ambiguous). Secondly, it changes
the Makefiles to use $(PYTHON) $(PYTHON_FLAGS) rather than calling
python directly.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Matthew William Cox <matt@mattcox.ca>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Currently makedepend is used by the Mesa Makefile-based build system,
but not required.
Unfortunately, not having it makes dependency resolution non-existent,
which is a source of subtle bugs, and is a rarely tested
configuration, since all Mesa developers likely have it installed.
Furthermore some idioms require dependency resolution to work at all,
such as making headers depend on generated files.
Code in glx/glxcmds.c which uses the XF86VIDMODE extension is already guarded. Also use
that guard to control inclusion of the xf86vmode.h header, and only enable that guard if the
XF86VIDMODE extension is found by pkgconfig.
This changes the behaviour on platforms which XF86VIDMODE exists, in that XF86VIDMODE used to
be mandatory, but is now optional.
Presumably other build systems are already arranging for -DXF86VIDMODE to be supplied to the
complier when glxcmds.c is compiled, so are not affected by this change
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Teach mklib/minstall more about cygwin so libraries are properly installed
Have mklib install the .dll into the lib/ staging directory as well
Have minstall install the .dll into PREFIX/bin at the same time as
installing the .dll.a link library into PREFIX/lib
mklib uses a '-' rather than a '.' as the separator before the version
number in library names on cygwin. Change the install globs so they match
library names like that.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Brian Paul <brianp@vmware.com>
I had used pkg-config from the Makefile because I didn't want to screw
around with the non-autoconf build, but that doesn't work because the
PKG_CONFIG_PATH or TALLOC_LIBS/TALLOC_CFLAGS that people set at
configure time needs to be respected and may not be present at build
time.
Bug #29585
This pulls in multiple i965 driver fixes which will help ensure better
testing coverage during development, and also gets past the conflicts
of the src/mesa/shader -> src/mesa/program move.
Conflicts:
src/mesa/Makefile
src/mesa/main/shaderapi.c
src/mesa/main/shaderobj.h
Fix this build error (in MesaGLUT-7.6.1)...
glut_cmap.c:23:66: error: X11/Xmu/StdCmap.h: No such file or directory
...by not preventing the cflags that pkg-config finds for glut dependencies
(including 'xmu') from being used.
Defining GLUT_CFLAGS before running the pkg-config prevents the
cflags found by pkg-config from being used.
This patch lets GLUT_CFLAGS that configure & pkg-config work
so hard to set actually get used.
Also make sure the generated configs/autoconf defines GLUT_CFLAGS
used in (at least) src/glut/glx/Makefile.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Merge all targets into targets/egl/. The target produces
egl_gallium_<HW>.so for each pipe driver and st_<API>.so for each client
APIs. This enables us to further merge egl_gallium_<HW>.so into
egl_gallium.so later.
When building OSMesa and xlib GL, the resulting OSMesa would be linked
against libGL instead of the internal mesa libraries. However, when
building with -fvisibility=hidden, some of the internal functions used
in OSMesa could not be resolved through libGL.
Instead, always build OSMesa standalone without linking against libGL.
This has the advantage that OSMesa is always built the same way, but it
means that disk space is wasted when libGL is installed since both
libraries will contain the internal objects.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: Tom Fogal <tfogal@alumni.unh.edu>
This slightly reduces reduces cairo-gl firefox-talos-gfx runtime on my
Ironlake:
before:
[ # ] backend test min(s) median(s) stddev. count
[ 0] gl firefox-talos-gfx 38.236 38.383 0.43% 5/6
after:
[ 0] gl firefox-talos-gfx 37.799 38.203 0.39% 6/6
It turns out the cost of caching these objects and looking them up in
the cache again is greater than the cost of just computing the object
again, particularly when the overhead of having a separate BO to pin
is removed.
(Those that are paying close attention will note that this is a
reversal of the path I was moving the driver in a couple of years ago.
The major thing that has changed is that back then all state was
recomputed when we wrapped the streaming state buffer, including
recompiling our precious programs. Now, we're uncaching just the
objects that are cheap to compute, and retaining caching of expensive
objects)
The remaining programs are ones I've had difficulty finding a build
environment for to make the build system or are unit tests that should
probably live next to their code instead. Hopefully people can bring
over the build for remaining pieces they care about.
With the omit list gone, there are not too many differences in building
core mesa and ES overlay. Remove the mesa/es and build both of them in
src/mesa/Makefile.
The new target installs client API modules to EGL_DRIVER_INSTALL_DIR.
They are used by st/egl.
The client APIs are built from OpenGL and OpenVG state trackers. For
this to work, st/vega is modified to produce a static library,
libvega.a, instead. st/es is also not needed any more. It is removed
and --with-state-trackers=es is replaced by --enable-gles-overlay.
As st/egl now has its own client API modules, this solves the ABI issue
between st/egl and client APIs, as long as the client API modules are
distributed with st/egl. Plus, this allows st/egl to support OpenGL
with non-Gallium libGL.so.
Define <API>_LIB, <API>_LIB_NAME, <API>_LIB_GLOB, and some other
variables in the configs. Fix a typo in glesv1_cm.pc.in where an
inexistent variable is used.
Rename vgFooBar to vegaFooBar and use vgapi as the dispatcher. This
makes sure there is always a current context when the internal functions
are called. And eglGetProcAddress is finally supported.
ES overlay is built with FEATURE_ES1 or FEATURE_ES2, and is built
without FEATURE_GL. Fix the build by always building OpenGL ES sources,
but test for FEATURE_ES1 or FEATURE_ES2. Also, define symbols that are
missing because FEATURE_GL is not defined.
allows the swrastg_dri.so to be built with llvmpipe, also links llvm
to all dri drivers
use --enable-gallium-llvm to use it.
Signed-off-by: Dave Airlie <airlied@redhat.com>
The variable X_LIBS from AC_PATH_XTRA contains only the -L searchdir
parameter and not the -lX11 to link to Xlib. Use X11 prefixed build vars
for linking with Xlib to avoid the conflict.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
This is the last nvfx unification patch.
nv[34]0_fragtex.c are moved to the common directory
nv[34]0_shader.h are renamed to nv[34]0_vertprog.h and moved to
the common directory
The separate nv30 and nv40 directories are removed from the build
system
Will be used to hold source files unified between nv30 and nv40.
Eventually all nv30 and nv40 code will be moved there and the
nv30 and nv40 directories will be removed.
Make sure we always test for XEXT version.
Make sure that the user has a recent version of libkms and libdrm installed.
Note that the st/xorg code requires so new versions to work but these are
needed to make a proper vmwgfx_drv.so driver which is the only real user.
Cherry picked from 46cf606cd35d6740b28fd26bd32dbdfdde2c7833
Conflicts:
configure.ac
Mesa now requires GCC 3.3.0 or later. See the following thread from
the mesa3d-dev mailing list for more details:
http://marc.info/?t=126748568900005&r=1&w=2
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
This moves the logic for how to align pitches, heights, and sizes of
objects to one central location. Fixes rendering with texture tiling
on i915. Note that current libdrm is required for the change for
I915_TILING_NONE pitch alignment.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit c1a4f249f18a766488da0832fbf6700de93af2f8)
GLX was built specially and before Mesa core because libglapi.a could
not be built with IN_DRI_DRIVER defined. This is no longer the case
since 6e99e6ddbf.
It works fine in my (limited) testing with both direct and indirect
rendering. I also compare the outputs after preprocessing (gcc -E) with
or without this commit, and they are identical.
The egl_g3d state tracker has support for KMS, and the support is based
on the egl state tracker. As egl_g3d provides more features, it should
be better to keep only egl_g3d to unify the efforts.
Need to use $CC for a shell variable, not $(CC) for a make variable
which the shell interprets as running the command "CC".
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
mesa/es should be built before the es state trackers. This is done by
separating those that need to be built early from SRC_DIRS to CORE_DIRS.
The new variable is not exported, and will be prepended to SRC_DIRS.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
The new EGL drivers use egl_g3d and respect EGL_DISPLAYS. They are
named after the display supported and the DRM name.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
This new (intermediate) EGL state tracker is the base work for EGL
drivers that uses Gallium. It makes it easier to support new window
systems.
Currently, there is support only for X11. This driver supports multiple
APIs (OpenVG, OpenGL, ...) and supports hardware acceleration through
winsys/drm.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
This was a silent dependency before, but now we really need 1.4.11 for
INTEL_swap_event support, so check for it.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Support the new DRI2 protocol request, DRI2SwapBuffers, in both direct
and indirect rendering context. This request allows the display server
to optimize back->front swaps (e.g. through page flipping) and allows us
to more easily support other GLX features like swap interval and the OML
sync extension in DRI2.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
This adds missing pkg-config lookup for intel and moves the radeon
lookup into a case...esac so it's only looked up when one or more of
the radeon drivers are enabled.
This change enabled gallium dri drivers by default under the
configure build system. Xorg drivers are built automaticaly
if a Xorg dev enviroment is installed and the Xorg version
is higher then 1.6.0.
Using a hack in the configure script the gallium intel
drivers have 3 options. Off, nothing is built. On, the
driver and binaries are built. Auto, only the driver but
not the binaries and winsys is built.
Since the i915g driver builds everywhere its can enable
the driver per default, so we can get build coverage.
But building the binaries per default is a pain for
distributions and testers since they conflict on the
install target with the old mesa drivers. Which are more
stable/faster/better.
So this change gives us the best of both worlds.
* Add an extra argument to configure which allows for specifying
different DRI driver search paths to libGL (FDO #24766)
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Not all drivers require the latest version, but distros are good at
tracking it since we've got a good record as far as not regressing, and
it sure beats having a weird compile failure in someone else's driver
later on.
When cross compiling on a 64bit machine, gen_matypes.c is build
for the host machine (64bit) but must generates code for the target
machine (32bit). This causes wrong offsets all over the place and
crashes googleearth on my machine. Solution is to add -m32 when
cross compiling.
Attached patch is compatible with linux-x86-32 and autoconf based
builds.
When cross compiling on a 64bit machine, gen_matypes.c is build
for the host machine (64bit) but must generates code for the target
machine (32bit). This causes wrong offsets all over the place and
crashes googleearth on my machine. Solution is to add -m32 when
cross compiling.
Attached patch is compatible with linux-x86-32 and autoconf based
builds.
This adds two --with configure options for setting defines for
MAX_WIDTH and MAX_HEIGHT. It's conceivably just as easy to define
these in CFLAGS manually, but this way users don't need to know
about internal Mesa details.
Patch updated by BrianP to set DEFINES, not CFLAGS.
(cherry picked from master, commit 7085dce750)
This adds two --with configure options for setting defines for
MAX_WIDTH and MAX_HEIGHT. It's conceivably just as easy to define
these in CFLAGS manually, but this way users don't need to know
about internal Mesa details.
Patch updated by BrianP to set DEFINES, not CFLAGS.
Since the drivers we produce on systems where we use
configure depend on none stable kernel API the driver
deliverables should not be built by default in the
mesa 7.7 release.
People wishing to shoot them self in the foot have to
pull the trigger themself, we just hand them the gun.
This driver does no transformation of the gallium calls
going to the real driver, like the identity matrix. It is
intended to be the basis for transforming and/or debug
drivers like trace and rbug.
Authors of this patch are:
Michal Krol, orignal heavy lifting.
José Fonesca, object wrapping code stolen from trace.
Jakob Bornecrantz, put it all toghether and renamed a stuff.
Fix mklib to deal with NOPREFIX and use --enable-auto-image-base for cygwin
Teach configure.ac some basic facts about cygwin
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Now that the dlopen wrappers are built into libmesa.a, we need to link
standalone libOSMesa with libdl to resolve dlopen and friends on
platforms that need it.
(cherry picked from commit 4795dd5950)
Now that the dlopen wrappers are built into libmesa.a, we need to link
standalone libOSMesa with libdl to resolve dlopen and friends on
platforms that need it.
The special feature of bin/minstall to copy symlinks is only ever needed
when installing libraries which may have .so symlinks. All the headers
and directories can use a normal install program.
These two modes are separated as $(INSTALL) and $(MINSTALL) to allow the
user (or autoconf) to override installing normal files as they please.
An autoconf check for the install program has been added and will be
used in preference to minstall when available.
Fixes bug 16053.
Here is a couple of fixes for GNU/Hurd:
- dri_interface.h: no libdrm support either.
- configure.ac:
- GNU/Hurd is a GNU OS with _GNU_SOURCE and PTHREADS.
- GNU needs a couple of flags like other OSes
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Move flags for linking standard C/C++ libraries from configure.ac to mklib
Use -norunpath flag when linking with Sun C++ compiler
Convert mklib -exports list into a linker mapfile
Set FINAL_LIBS correctly when -noprefix is used
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
This catches the linux-uclibc case and any others that were being set
prior to 98fcdf3f. Fixes bug 20345.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
This rewrites the sparc GLAPI code so that it's PIC friendly and works
with all of the TLS/PTHREADS/64-bit/32-bit combinations properly.
As a result we can turn SPARC asm back on. Currently it's only
enabled on Linux, as that's the only place where I can test this
stuff out.
For the moment the cliptest SPARC asm routines are disabled as they
are non-working. The problem is that they use register %g7 as a
temporary which is where the threading libraries store the thread
pointer on SPARC. I will fix that code up in a future change as it's
a pretty important routine to optimize.
Like x86 we do the runtime patch as a pthread once-invoked initializer
in init_glapi_relocs().
Unlike x86, however, our GLAPI stubs on SPARC are just two instruction
sequences that branch to a trampoline and put the GLAPI offset into a
register. The trampoline is what we run-time patch. The stubs thus
all look like:
glFoo:
ba __glapi_sparc_foo_stub
sethi GLAPI_OFFSET(glFOO) * PTR_SIZE, %g3
This actually makes generate_entrypoint() a lot simpler on SPARC. For
this case in generate_entrypoint() we generate stubs using a 'call'
instead of the 'ba' above to make sure it can reach.
In order to get a proper tail call going here, in the unpatched case,
we do several tricks. To get the current PC, for example, we save the
return address register into a temporary, do a call, save the return
address register written by the call to another temporary, then
restore the original return address register value. This is to
avoid having to allocate a stack frame.
This is necessary for PIC address formation.
This new GLAPI scheme lets us get rid of the ugly SPARC GLAPI hacks in
__glXInitialize() and one_time_init().
Signed-off-by: David S. Miller <davem@davemloft.net>
It is only the i965simple pipe driver that was broken
in the gallium-texture-transfere merge that is being
disabled, mothing more nothing less.
FYI, there never where working i965 hardware support
in gallium anyways.
Chia-I Wu
Chia-I Wu
Alan Hourihane
Jon TURNEY
Marek Olšák
Benjamin Franzke
Cyril Brulebois
Thomas Hellstrom
Christian König
Johannes Obermayr
Brian Paul
Tapani Pälli
Dave Airlie
Jesse Barnes
nobled
Samuel Thibault
José Fonseca
Chris Wilson
Tom Fogal
Christopher James Halse Rogers
Kristian Høgsberg
Kenneth Graunke
Tormod Volden
Jerome Glisse
Pierre Allegraud
Christoph Bumiller
Eric Anholt
Thomas Balling Sørensen
Luca Barbieri
Ian Romanick
Li Peng
Thomas Balling Sørensen
Jakob Bornecrantz
John Hein
Jakob Bornecrantz
Corbin Simpson
Dan Nicholson
Younes Manton
Vinson Lee
Xavier Chantry
George Sapountzis
Jeff Smith
Michel Dänzer
Keith Whitwell
Francisco Jerez
Alan Coopersmith
Fabio Pedretti
Sedat Dilek
Chow Loong Jin
Thierry Vignaud
Marc Dietrich
Alex Deucher
Ben Skeggs
Jerome Glisse
Dave Airlie
Robert Noland
Joel Bosveld
David S. Miller