Fixes the build of builtin_compiler on my 32-bit build where xcb-dri2
is in a custom prefix but the custom prefix flags weren't available.
It shouldn't have been in LIBS anyway.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Needed for automake. Using AC_PROG_PATH(bison/flex) causes automake to
fail to build .y and .l files.
It is up to the builder to use bison/flex instead of yacc/lex.
Reviewed-by: Eric Anholt <eric@anholt.net>
Tested-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Matt Turner <mattst88@gmail.com>
After the removal of the dri driver link test, this should help avoid
the original problem that it was designed to catch: The warning about
a missing prototype due to typoing a function name scrolling by in the
Mesa build spew, and you not noticing until you try to run an
application and it falls back to swrast.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We just prefix the $CLANG environment variable in configure.ac with acv_mesa_
Found by: tinderbox
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This has the drawback that when creating configure for
distribution, wayland needs to be available for the packager.
Also the the macros has the wayland prefix hardcoded, so
we cant copy it in mesa right now.
AC_CHECK_LIB has this nasty behavior, like the cflags tests, of
automatically putting the tested value into the global LIBS on
success. This caused -lexpat to end up in LIBS, but without the
--with-expat dir, so my 32-bit build on a 64 system using expat from a
custom prefix could only find the system expat and fail to link on the
one current consumer of the LIBS variable: the dri driver test link.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Refine "always build shared dricore" so we don't build it if we don't need
it because we aren't actually building any dri drivers because of --disable-driglx-direct
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Matt Turner <mattst88@gmail.com>
libglapi.so, libGL.so, libGLESv2.so, libGLESv1_CM.so must all
come from the same version of Mesa or bad things may happen.
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Finally, a quiet build for the i965 driver, at least! (Note, you can
still get verbose builds at build-time by saying "make V=1")
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This does introduce a warning by the automake build system, that the
missing-symbols test build is non-portable. That's true -- Mac OS X
can't take something built as a loadable module and just link it as a
library. Of course, we aren't building this on OS X at all, so it
would be nice to be able to suppress it, but I haven't found a way.
Still, the build is going to be much quieter than we have ever had
before, so I think this is a fair tradeoff until we find a way to shut
that warning up.
v2: Put a link in /lib to avoid transition pains for people.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> (v1)
Reviewed-by: Matt Turner <mattst88@gmail.com> (v1)
It looks like AC_PROG_SED was added in 2.59b, and wasn't in the
original 2.59 in the original 2.59. Presumably that's why, though
it could've been an oversight.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Matt Turner <mattst88@gmail.com>
The new kernel patch I submitted makes the interface opt-in, so all
batchbuffers aren't preceded by the 4 MI_LOAD_REGISTER_IMMs. This
requires the updated i915_drm.h present in libdrm 2.4.30.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This reverts commit 5a478976ae.
It broke the build. DRI drivers were no longer being installed by
`make install` (and probably not being built at all). It appears to be
due to a few small, subtle mistakes, and the fix isn't clear enough to
simply commit without going through review. In the meantime, revert it.
All other xorg modules require at least 2.60 (released in 2006), so we
may as well increase it to match. It's also doubtful anyone tests the
build with 2.59 (from 2003), so it may not even work anyway.
Detect whether a new enough version of XCB is installed at configure
time. If it is not, don't enable the extension and don't build the
unit tests.
v2: Move the AM_CONDIATION outside the case-statement so that it is
invoked even for non-GLX builds. This prevents build failures with
osmesa, for example.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Robert Hooker <robert.hooker@canonical.com>
This adds a new tests directory at the top-level and some extra build
infrastructure. The tests use the Google C++ Testing Framework, and
they will only be built if configure can detect its availability. The
tests are automatically wired-in to run with 'make check'.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Acked-by: Chad Versace <chad.versace@linux.intel.com>
This is a workaround for https://bugs.freedesktop.org/show_bug.cgi?id=43861.
Actually the issue which makes -pedantic failing should be solved.
Reviewed-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Brian Paul <brianp@vmware.com>
And warn loudly in case people want to use it. Too many tester report
gpu hangs on irc and we rootcause this ...
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
gbm_gallium does not depend on DRI, but its build rules depend on DRI_LIB_DEPS
being set. Output an error when the user enables gbm_gallium but disables
DRI. This is just a workaround.
This will be used to avoid the prepare() step in the i965 driver's
state setup. Instead, we can just speculatively emit the primitive
into the batchbuffer, then check if the batch is too big, rollback and
flush, and replay the primitive.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Paul Berry <stereotype441@gmail.com>
There's no sense in building a broken driver. Previously, there was
the potential of building a DRI1-only driver that would work for DRI1
and fail on DRI2 because the newer libdrm code wasn't present. Now
the radeon build system should be matching intel and nouveau.
Should fall back to shader based decoding (g3dvl) for now.
This is probably broken on systems that support xvmc, because
nouveau_video_buffer_create has no way to know for what api
the buffer is created, so I think this call might need a
separate argument as workaround.
Signed-off-by: Maarten Lankhorst <m.b.lankhorst@gmail.com>
As pointed out by Michel Dänzer, gcc -lstdc++ doesn't work on all systems,
because it may require other libraries which are only pulled in implicitly
by g++. And libstdc++ is available only with GNU compiler.
Use c++ compiler for linking and remove redundant LDFLAGS += -lstdc++
all over the tree.
In addition to setting up the flags correctly, this renames the
generated libraries to ensure they get 'Mangled' in the name.
This is very useful for distros and the like, where mangled Mesa
and non-mangled GL libraries typically need to be installed
side-by-side.
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
This fixes a build error introduced with commit
"winsys/svga: Update to vmwgfx kernel module 2.1"
if both the svga driver and the xorg state tracker was enabled
at the same time.
If needed we can re-add a minimal target for basic functionality.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Acked-by: Kristian Høgsberg <krh@bitplanet.net>
Acked-by: Marek Olšák <maraeo@gmail.com>
Acked-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Jakob Bornecrantz <jakob@vmware.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Build-Tested-by: Jakob Bornecrantz <jakob@vmware.com>
Tested-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
libGLw is an old OpenGL widget library with optional Motif support.
It almost never changes and very few people actually still care about
it, so we've decided to ship it separately.
The new home for libGLw is: git://git.freedesktop.org/mesa/glw/
Reviewed-by: Brian Paul <brianp@vmware.com>
EGL doesnt define howto manage different native platforms.
So mesa has a builtime configurable default platform,
whith non-standard envvar (EGL_PLATFORM) overwrites.
This caused unneeded bugreports, when EGL_PLATFORM was forgotten.
Detection is grouped into basic types of NativeDisplays (which itself
needs to be detected). The final decision is based on characteristcs
of these basic types:
File Desciptor based platforms (fbdev):
- fstat(2) to check for being a fd that belongs to a character device
- check kernel subsystem (todo)
Pointer to structuctures (x11, wayland, drm/gbm):
- mincore(2) to check whether its valid pointer to some memory.
- magic elements (e.g. pointers to exported symbols):
o wayland display stores interface type pointer (first elm.)
o gbm stores pointer to its constructor (first elm.)
o x11 as a fallback (FIXME?)
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
In a rare case of building gallium only, we need to
check if the required packages are available
libdrm_[intel|nouveau] - gallium[i915 i965|nouveau]
v2: r300g and r600g do not need libdrm_radeon
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Marek Olšák <maraeo@gmail.com>
commit 1856230d9fa61710cce3e152b8d88b1269611a73
Author: José Fonseca <jose.r.fonseca@gmail.com>
Date: Tue Jul 12 23:41:27 2011 +0100
make: Use better var names on packaging.
commit d1ae72d0bd14e820ecfe9f8f27b316f9566ceb0c
Author: José Fonseca <jose.r.fonseca@gmail.com>
Date: Tue Jul 12 23:38:21 2011 +0100
make: Apply several of Dan Nicholson's suggestions.
commit f27cf8743ac9cbf4c0ad66aff0cd3f97efde97e4
Author: José Fonseca <jose.r.fonseca@gmail.com>
Date: Sat Jul 9 14:18:20 2011 +0100
make: Put back the tar.bz2 creation rule.
Removed by accident.
commit 34983337f9d7db984e9f0117808274106d262110
Author: José Fonseca <jose.r.fonseca@gmail.com>
Date: Sat Jul 9 11:59:29 2011 +0100
make: Determine tarballs contents via git ls-files.
The wildcards were a mess:
- lots of files for non Linux platforms missing
- several files listed and archived twice
Using git-ls-files ensures things are not loss when making the tarballs.
commit 34a28ccbf459ed5710aafba5e7149e8291cb808c
Author: José Fonseca <jose.r.fonseca@gmail.com>
Date: Sat Jul 9 11:07:14 2011 +0100
glut: Remove GLUT source.
Most distros ship freeglut, and most people don't care one vs the other,
and it hasn't been really maintained.
So it is better to have Mesa GLUT be revisioned and built separately
from Mesa.
commit 5c26a2c3c0c7e95ef853e19d12d75c4f80137e7d
Author: José Fonseca <jose.r.fonseca@gmail.com>
Date: Sat Jul 9 10:31:02 2011 +0100
Ignore the tarballs.
commit 26edecac589819f0d0efe2165ab748dbc4e53394
Author: José Fonseca <jose.r.fonseca@gmail.com>
Date: Sat Jul 9 10:30:24 2011 +0100
make: Create the Mesa-xxx-devel symlink automatically.
Also actually remote the intermediate uncompressed tarballs.
I think the past are those times when the gallium interface was changed all
the time. Now it is not, so there is no reason to always compile the libs
if they are not needed.
As Chia-I Wu said 'There are two libGL providers, Xlib and DRI based
they cannot coexist'
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Marek Olšák <maraeo@gmail.com>
This version is mostly Dan's post to the mesa-dev mailing list on
6/22/2011.
NOTE: This is a candidate for the 7.10 and 7.11 branches.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Use the new swap event type so we get valid SBC values.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
libdrm is used in multiple places. Always check for it and set
have_libdrm. Each user can then check the variable.
This is useful when only EGL and DRI drivers are needed.
The idea is that DRI driver, libGL and libOSMesa are libraries that can
be independently enabled, yet --with-driver does not allow us to easily
do that, if not impossible. This also matches what
--enable-{egl,xorg,d3d1x} do for the respective libraries.
There are two libGL providers: Xlib-based and DRI-based. They cannot
coexist. To be able to choose between them, --enable-xlib-glx is also
added.
With this commit, --with-driver=dri can be replaced by
$ ./configure --enable-dri --enable-glx --disable-osmesa
--with-driver=xlib can be replaced by
$ ./configure --disable-dri --enable-glx --enable-osmesa \
--enable-xlib-glx
and --with-driver=osmesa can be replaced by
$ ./configure --disable-dri --disable-glx --enable-osmesa
Some combinations that cannot be supported with --with-driver will
produce errors at the moment. But in the future, we would like to
support, for example,
$ ./configure --enable-dri --disable-glx --enable-egl
(build libEGL and DRI drivers, but not libGL)
Note that this commit still keeps --with-driver for transitional
purpose.
All it's going to do is generate lots and lots and lots of
'warning: visibility attribute not supported in this configuration; ignored'
warnings
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
If --disable-gallium is passed, llvm-config isn't checked for, so mark
it explicitly as absent, through LLVM_CONFIG=no.
Passing --disable-gallium would result in:
| ../configure: line 9739: --version: command not found
| ../configure: line 9740: --cppflags: command not found
| ../configure: line 9741: --libs: command not found
| ../configure: line 9743: --ldflags: command not found
With this commit, one gets that instead:
| configure: error: LLVM is required to build Gallium R300 on x86 and x86_64
Signed-off-by: Cyril Brulebois <kibi@debian.org>
This removes all the --enable-gallium-$driver options and --disable-gallium.
Gallium can be disabled by --with-gallium-drivers= (without parameters).
Default is:
--with-gallium-drivers=r300,swrast
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
There is an obvious redundancy:
--with-driver=dri VS --with-state-trackers=dri
--with-driver=xlib VS --with-state-trackers=glx
--enable-openvg VS --with-state-trackers=vega
--enable-egl VS --with-state-trackers=egl
This patch adds two new options for the remaining state trackers:
--enable-xorg
--enable-d3d1x
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
- Based on the work of Себастьян Gliţa Κατινα <cglita@yahoo.com>
- Split Makefile.template into Makefile.defines and Makefile.targets
- Adapt other drivers to new situation
- Fixes https://bugs.freedesktop.org/show_bug.cgi?id=35441
Signed-off-by: Brian Paul <brianp@vmware.com>
Based uppon a patch from Pali Rohár <pali.rohar@gmail.com>.
This seems to get at least YUV->RGB conversion working.
So a simple "mplayer -vo vdpau" now seems to work fine.
Correctly links against selinux library when MESA is built with --enable-selinux option.
Fixes bug #36333 in Freedesktop bugzilla
Signed-off-by: Dave Airlie <airlied@redhat.com>
We only handle a 32 bit swap count, so use the new structure definitions.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
So --enable-texture-float it is.
Hardware drivers (including the Gallium ones) should
use #ifdef TEXTURE_FLOAT_ENABLED to hide any code that may
expose floating-point renderbuffers via any interface,
public or private.
v2: Print a warning when using --enable-texture-float.
Add Cygwin platform-specific settings and drivers to build for dri driver:
- by default, disable direct rendering.
- if direct rendering is enabled, the swrast dridriver is the only one it's
sensible to try to build (this doesn't work at the moment as additional patches
are required to build a libGL which can load just swrast without the DRM headers,
even though there's no actual functional dependency)
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Julien Cristau <jcristau@debian.org>
The Hurd kernel doesn't have DRM yet.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-By: Jakob Bornecrantz <wallbraker@gmail.com>
Fix build when configured --with-driver=dri --disable-driglx-direct on targets
without drm e.g. GNU/Hurd and Cygwin
Based on the Debian patch file '05_hurd-ftbfs.diff' by Samuel Thibault.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-By: Jakob Bornecrantz <wallbraker@gmail.com>
We need more and more of these, and it is difficult and prone to version
incompatability issues trying to single out every one of them.
This mimicks what was done in SCons.
This commit is basically a copy-over of the fix
Chia-I Wu's commited to wayland:
http://cgit.freedesktop.org/wayland/wayland-demos/commit/?id=1b6c0ed95
"Workaround an xcb-dri2 bug.
xcb_dri2_connect_device_name generated by xcb-proto 1.6 is broken.
It only works when the length of the driver name is a multiple of 4."
In my last commit I introduced a build dependency upon a new libdrm.
Add the associated autoconf checks. As the headers are part of the core
libdrm, we need to bump that version and so may as well bump the chipset
specific versions simultaneously.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Fix a typo which meant that --enable-shared-glapi didn't actually cause a shared glapi to be built
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
This an adds --enable-shared-dricore option to configure. When enabled,
DRI modules will link against a shared copy of the common mesa routines
rather than statically linking these.
This saves about 30MB on disc with a full complement of classic DRI
drivers.
v2: Only enable with a gcc-compatible compiler that handles rpath
Handle DRI_CFLAGS without filter-out magic
Build shared libraries with the full mklib voodoo
Fix typos
v3: Resolve conflicts with talloc removal patches
Signed-off-by: Christopher James Halse Rogers <christopher.halse.rogers@canonical.com>
When --enable-shared-glapi is specified, libGL will share libglapi with
OpenGL ES instead of defining its own copy of glapi. This makes sure an
app will get only one copy of glapi in its address space.
The new option is disabled by default. When enabled, libGL and libglapi
must be built from the same source tree and distributed together. This
requirement comes from the fact that the dispatch offsets used by these
libraries are re-assigned whenever GLAPI XMLs are changed.
For GLX, indirect rendering for has_different_protocol() functions is
tricky. A has_different_protocol() function is assigned only one
dispatch offset, yet each entry point needs a different protocol opcode.
It cannot be supported by the shared glapi. The fix to this is to make
glXGetProcAddress handle such functions specially before calling
_glapi_get_proc_address.
Note that these files are automatically generated/re-generated
src/glx/indirect.c
src/glx/indirect.h
src/mapi/glapi/glapi_mapi_tmp.h
Move _glapi_* symbols from libGLESv1_CM.so and libGLESv2.so to
libglapi.so. This makes sure an app will get only one copy of glapi in
its address space.
Note that with this change, libGLES* and libglapi must be built from the
same source tree and distributed together. This requirement comes from
the fact that the dispatch offsets used by these libraries are
re-assigned whenever GLAPI XMLs are changed.
With core mesa doing runtime API checks, GLES overlay is no longer
needed. Make --enable-gles-overlay equivalent to --enable-gles[12].
There may still be places where compile-time checks are done. They
could be fixed case by case.
If you want to enable noop set GALLIUM_NOOP=1 as an env variable.
You need first to enable noop wrapping for your driver see change
to src/gallium/targets/dri-r600/ in this commit as an example.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
st/egl should be enabled with --enable-openvg even the driver is xlib or
osmesa. Also, GLX_DIRECT_RENDERING should not be defined because libdrm
is not checked.
This driver is a fake swdri driver that perform no operations
beside allocation gallium structure and buffer for upper layer
usage.
It's purpose is to help profiling core mesa/gallium without
having pipe driver overhead hidding hot spot of core code.
scons file are likely inadequate i am unfamiliar with this
build system.
To use it simply rename is to swrast_dri.so and properly set
LIBGL_DRIVERS_PATH env variable.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Make autoconf decide the client APIs enabled first. Then when OpenGL
and OpenGL ES are disabled, there is no need to build src/mesa/; when
OpenGL is disabled, no $mesa_driver should be built. Finally, add
--enable-openvg to enable OpenVG.
With these changes, an OpenVG only build can be configured with
$ ./configure --disable-opengl --enable-openvg
src/mesa, src/glsl, and src/glx will be skipped, which saves a great
deal of compilation time.
And an OpenGL ES only build can be configured with
$ ./configure --disable-opengl --enable-gles-overlay
First, it changes autoconf to use a "python2" binary when available,
rather than plain "python" (which is ambiguous). Secondly, it changes
the Makefiles to use $(PYTHON) $(PYTHON_FLAGS) rather than calling
python directly.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Matthew William Cox <matt@mattcox.ca>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Eric Anholt
Colin Walters
Matt Turner
ojab
Jeremy Huddleston
Benjamin Franzke
Christian König
Jon TURNEY
Thomas Hellstrom
Kenneth Graunke
Ian Romanick
Johannes Obermayr
Kai Wasserbäch
Daniel Vetter
Chia-I Wu
Maarten Lankhorst
Marcin Slusarz
Tom Fogal
José Fonseca
Marek Olšák
Chia-I Wu
Michel Dänzer
Emil Velikov
Younes Manton
Marcin Baczyński
Jesse Barnes
Alan Hourihane
Cyril Brulebois
Brian Paul
Tapani Pälli
Dave Airlie
nobled
Samuel Thibault
Chris Wilson
Christopher James Halse Rogers
Kristian Høgsberg
Tormod Volden
Jerome Glisse
Pierre Allegraud
Christoph Bumiller
Thomas Balling Sørensen