The created DRI screen can be used to allocate VRAM memory from
display GPU in case of prime.
v2: add comments to make code readable (Pierre-Eric)
remove driver name match check
v3: keep old path for non-mesa driver (Michel Dänzer)
v4: fallback if driver not found for display GPU (Michel Dänzer)
fallback if create screen fail for display gpu (Michel Dänzer)
Signed-off-by: Yogesh Mohanmarimuthu <yogesh.mohanmarimuthu@amd.com>
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10595>
We were caching only the value set with glXSwapIntervalSGI(), missing out
on the default setting of the swap interval by the loader. This fixes
glxgears's warning about being vblank synchronized by default.
Fixes: 9777c4234b ("loader: drop the [gs]et_swap_interval callbacks")
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Same as the previous commit, but this one was split out because it's
a bit more complicated: this field is given as a pointer to a function,
so the function had to be changed as well, and the function was use in
a bunch of places, which needed updating as well.
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
As is there are two places that do the typedefs - dri_interface.h and
this header. As we cannot include the former in here, just drop the
typedefs and use the struct directly (as needed).
This is required because typedef redefinition is C11 feature which is
not supported on all the versions of GCC used to build mesa.
v2: Kill the typedef alltogether, as per Marek.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96236
Cc: Vinson Lee <vlee@freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This allows clear and easy communication between the two.
Caller: Requesting information (struct vN)
Callee: I know how to deal with older version (vN-1) only. Here is your
data and the version I support.
Caller: Older version ? Sure I'll cap all access to the fields provided
by the older version (vN-1)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Tom Stellard <thomas.stellard@amd.com>
v2: From Martin Peres
- convert to the new drawable interface
- delete dead code after the dropping of some vfuncs
- delete the width and height attributes since they are found in the helper
Signed-off-by: Boyan Ding <boyan.j.ding@gmail.com>
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.co.uk>
Prevent calls to glXGetSyncValuesOML() and glXWaitForMscOML()
from overwriting the (ust,msc) values of the last successfull
swapbuffers call (PresentPixmapCompleteNotify event), as
glXWaitForSbcOML() relies on those values corresponding to
the most recent completed swap, not to whatever was last
returned from the server.
Problematic call sequence without this patch would have been, e.g.,
glXSwapBuffers()
... wait ...
swap completes -> PresentPixmapComplete event -> (ust,msc)
updated to reflect swap completion time and count.
... wait for at least 1 video refresh cycle/vblank increment.
glXGetSyncValuesOML()
-> PresentNotifyMsc event overwrites (ust,msc) of swap
completion with (ust,msc) of most recent vblank
glXWaitForSbcOML()
-> Returns sbc of last completed swap but (ust,msc) of last
completed vblank, not of last completed swap.
-> Client is confused.
Do this by tracking a separate set of (ust, msc) for the
dri3_wait_for_msc() call than for the dri3_wait_for_sbc()
call.
This makes the glXWaitForSbcOML() call robust again and restores
consistent behaviour with the DRI2 implementation.
Fixes applications originally written and tested against
DRI2 which also rely on this not regressing under DRI3/Present,
e.g., Neuro-Science software like Psychtoolbox-3.
This patch fixes the problem.
v2: Rename vblank_msc/ust to notify_msc/ust as suggested by
Axel Davy for better clarity.
Cc: "10.3 10.4" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
v2: Use the UST value provided in the PRESENT_COMPLETE_NOTIFY event
rather than gettimeofday(), which gives us the presentation time
instead of the time when SwapBuffers was called. Suggested by
Keith Packard. This relies on the fact that the X DRI3/Present
implementations use microseconds for UST.
v3: Properly ignore PresentCompleteKindMSCNotify; multiply in 64 bits
(caught by Keith Packard).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Keith Packard <keithp@keithp.com> [v3]
Reviewed-by: Marek Olšák <marek.olsak@amd.com> [v1]
A driver which doesn't have async flip support will queue up flips without any
way to replace them afterwards. This means we've got a scanout buffer pinned
as soon as we schedule a flip and so we need another buffer to keep from
stalling.
When vblank_mode=0, if there are only three buffers we do:
current scanout buffer = 0 at MSC 0
Render frame 1 to buffer 1
PresentPixmap for buffer 1 at MSC 1
This is sitting down in the kernel waiting for vblank to
become the next scanout buffer
Render frame 2 to buffer 2
PresentPixmap for buffer 2 at MSC 1
This cannot be displayed at MSC 1 because the
kernel doesn't have any way to replace buffer 1 as the pending
scanout buffer. So, best case this will get displayed at MSC 2.
Now we block after this, waiting for one of the three buffers to become idle.
We can't use buffer 0 because it is the scanout buffer. We can't use buffer 1
because it's sitting in the kernel waiting to become the next scanout buffer
and we can't use buffer 2 because that's the most recent frame which will
become the next scanout buffer if the application doesn't manage to generate
another complete frame by MSC 2.
With four buffers, we get:
current scanout buffer = 0 at MSC 0
Render frame 1 to buffer 1
PresentPixmap for buffer 1 at MSC 1
This is sitting down in the kernel waiting for vblank to
become the next scanout buffer
Render frame 2 to buffer 2
PresentPixmap for buffer 2 at MSC 1
This cannot be displayed at MSC 1 because the
kernel doesn't have any way to replace buffer 1 as the pending
scanout buffer. So, best case this will get displayed at MSC
2. The X server will queue this swap until buffer 1 becomes
the scanout buffer.
Render frame 3 to buffer 3
PresentPixmap for buffer 3 at MSC 1
As soon as the X server sees this, it will replace the pending
buffer 2 swap with this swap and release buffer 2 back to the
application
Render frame 4 to buffer 2
PresentPixmap for buffer 2 at MSC 1
Now we're in a steady state, flipping between buffer 2 and 3
waiting for one of them to be queued to the kernel.
...
current scanout buffer = 1 at MSC 1
Now buffer 0 is free and (e.g.) buffer 2 is queued in
the kernel to be the scanout buffer at MSC 2
Render frames, flipping between buffer 0 and 3
When the system can replace a queued buffer, and we update Present to take
advantage of that, we can use three buffers and get:
current scanout buffer = 0 at MSC 0
Render frame 1 to buffer 1
PresentPixmap for buffer 1 at MSC 1
This is sitting waiting for vblank to become the next scanout
buffer
Render frame 2 to buffer 2
PresentPixmap for buffer 2 at MSC 1
Queue this for display at MSC 1
1. There are three possible results:
1) We're still before MSC 1. Buffer 1 is released,
buffer 2 is queued waiting for MSC 1.
2) We're now after MSC 1. Buffer 0 was released at MSC 1.
Buffer 1 is the current scanout buffer.
a) If the user asked for a tearing update, we swap
scanout from buffer 1 to buffer 2 and release buffer
1.
b) If the user asked for non-tearing update, we
queue buffer 2 for the MSC 2.
In all three cases, we have a buffer released (call it 'n'),
ready to receive the next frame.
Render frame 3 to buffer n
PresentPixmap for buffer n
If we're still before MSC 1, then we'll ask to present at MSC
1. Otherwise, we'll ask to present at MSC 2.
Present already does this if the driver offers async flips, however it does
this by waiting for the right vblank event and sending an async flip right at
that point.
I've hacked the intel driver to offer this, but I get tearing at the top of
the screen. I think this is because flips are always done from within the
ring, and so the latency between the vblank event and the async flip happening
can cause tearing at the top of the screen.
That's why I'm keying the need for the extra buffer on the lack of 2D
driver support for async flips.
Signed-off-by: Keith Packard <keithp@keithp.com>
Acked-by: Jason Ekstrand <jason.ekstrand@intel.com>
Tested-by: Dylan Baker <baker.dylan.c@gmail.com>
v2:
- Move dri*_query_renderer_* into their respective dri*_priv.h headers
- Drop then unnneeded include of dri2.h from dri2_query_renderer.c
- Rename dri2_query_renderer.c as dri_common_query_renderer.c, as it's contents
now are used for more than dri[23]
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
The differences with DRI2 GPU offloading are:
a) There's no logic for GPU offloading needed in the Xserver
b) for DRI2, the card would render to a back buffer, and
the content would be copied to the front buffer (the same buffers
everytime). Here we can potentially use several back buffers and copy
to buffers with no tiling to share with X. We send them with the
Present extension.
That means than the DRI2 solution is forced to have tearings with GPU
offloading. In the ideal scenario, this DRI3 solution doesn't have this
problem.
However without dma-buf fences, a race can appear (if the card is slow
and the rendering hasn't finished before the server card reads the buffer),
and then old content is displayed. If a user hits this, he should probably
revert to the DRI2 solution (LIBGL_DRI3_DISABLE). Users with cards fast
enough seem to not hit this in practice (I have an Amd hd 7730m, and I
don't hit this, except if I force a low dpm mode)
c) for non-fullscreen apps, the DRI2 GPU offloading solution requires
compositing. This DRI3 solution doesn't have this requirement. Rendering
to a pixmap also works.
d) There is no need to have a DDX loaded for the secondary card.
V4: Fixes some piglit tests
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This should have happend around the time of commit 4680d23, but Keith's
DRI3 patches and my GLX_MESA_query_renderer patches crossed in the mail.
I don't have a working DRI3 setup, so I haven't been able to actually
verify this. I'm hoping that someone can piglit this for me on DRI3...
It's also unfortunate the DRI2 and DRI3 can't share more code.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: Keith Packard <keithp@keithp.com>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Use a const array with the extensions, rather than assigning each
one to a fixed size array at runtime.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
v2: Indent according to Mesa style, reuse sbc instead of making a new
swap_count field, and actually get a usable back before returning the
age of the back (fixing updated piglit tests). Changes by anholt.
Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com>
Reviewed-by: Robert Bragg <robert@sixbynine.org> (v1)
Reviewed-by: Adel Gadllah <adel.gadllah@gmail.com> (v2)
Reviewed-by: Eric Anholt <eric@anholt.net>
This automatically adjusts the number of buffers that we want based on
what swapping mode the X server is using and the current swap interval:
swap mode interval buffers
copy > 0 1
copy 0 2
flip > 0 2
flip 0 3
Note that flip with swap interval 0 is currently limited to twice the
underlying refresh rate because of how the kernel manages flipping. Moving
from 3 to 4 buffers would help, but that seems ridiculous.
v2: Just update num_back at the point that the values that change num_back
change. This means we'll have the updated value at the point that the
freeing of old going-to-be-unused backbuffers happens, which might not
have been the case before (change by anholt, acked by keithp).
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Tracking the full 64-bit SBC values makes it clearer how those values are
being used, and simplifies the wait_msc code. The only trick is in
re-constructing the full 64-bit value from Present's 32-bit serial number
that we use to pass the SBC value from request to event.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
v2
* Set logger to ErrorMessageF. Spotted by Kristian
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
It is the maximum number of back buffers, but the name is confusing and is
easily read as the maximum back buffer index. Chage to DRI3_NUM_BACK to make
the intended usage a bit clearer.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Move the depth field up with width and height.
Remove unused previous_time and frames fields.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
libxshmfence v1.0 foolishly used 'int32_t *' for the fence type, which
works when the fence is a linux futex. However, version 1.1
changes the exported datatype to 'struct xshmfence *'
Require libxshmfence version 1.1 and switch the API around.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Uses the __DRIimage loader interfaces.
v2: Fix _XIOErrors when DRI3 isn't present (change by anholt). Apparently
XCB just terminates your connection if you don't check for extensions
before using them, instead of returning an error like you'd expect.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Jesse Natalie
Adam Jackson
Emma Anholt
Pierre-Eric Pelloux-Prayer
Yogesh Mohanmarimuthu
Eric Engestrom
Eric Anholt
Emil Velikov
Marek Olšák
Boyan Ding
Mario Kleiner
Kenneth Graunke
Keith Packard
Jon TURNEY
Axel Davy
Ian Romanick
Emil Velikov
Adel Gadllah