Add dri2_egl_display_vtbl::copy_buffers, set it for each
platform, and let egl_dri2 dispatch eglCopyBuffers to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Add dri2_egl_display_vtbl::query_buffer_age, set it for each
platform, and let egl_dri2 dispatch API.QueryBufferAge to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Add dri2_egl_display_vtbl::destroy_surface, set it for each
platform, and let egl_dri2 dispatch eglDestroySurface to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Add dri2_egl_display_vtbl::create_pbuffer_surface, set it for each
platform, and let egl_dri2 dispatch eglCreatePbufferSurface to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Add dri2_egl_display_vtbl::create_pbuffer_surface, set it for each
platform, and let egl_dri2 dispatch eglCreatePixmapSurface to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Add dri2_egl_display_vtbl::create_window_surface, set it for each
platform, and let egl_dri2 dispatch eglCreateWindowSurface to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Add dri2_egl_display_vtbl::swap_buffers_with_damage, set it for each
platform, and let egl_dri2 dispatch eglSwapBuffersWithDamageEXT to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Add dri2_egl_display_vtbl::swap_buffers, set it for each platform, and
let egl_dri2 dispatch eglSwapBuffers to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Add dri2_egl_display_vtbl::swap_interval, set it for each platform, and
let egl_dri2 dispatch eglSwapInterval to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Don't call it through the driver dispatch table. Just call it
statically.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Each of the egl_dri2 platforms (except Android) prefix their function
names with "dri2", not "dri2_${platform}". This means many function
names have three separate definitions in the egl_dri2 directory: one in
each of platform_drm.c, platform_wayland.c, and platform_x11.c. For
example, each of the three files defines dri2_create_window_surface().
The name collisions make it difficult to review patches for correctness
("Is this patch hunk calling a platform_x11 function or a global
egl_dri2 function?"), complicate debugging, and confuse code navigation
tools.
For each function in platform_x11.c prefixed with 'dri2', this patch
changes its prefix to 'dri2_x11'. Likewise for platform_drm.c and
'dri2_drm'; and platform_wayland.c and 'dri2_wl'.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
dri2_egl_display has only one virtual function, 'authenticate'. Define
dri2_egl_display::vtbl and move 'authenticate' there.
This prepares for the EGL platform extensions, which will add many
more virtual functions to dri2_egl_display.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
This pulls in EGL_EXT_platform_base, EGL_EXT_platform_wayland,
EGL_EXT_platform_x11, and EGL_MESA_platform_gbm.
This patch has a lot of churn because Khronos recently changed its
method of generating headers. Khronos now generates it headers from XML.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
This allows retrieving the existing BO and incrementing its reference count,
instead of creating a separate winsys representation for it, when the kernel
reports that the BO was already assigned a virtual memory address.
This fixes problems with XWayland using radeonsi and the
xf86-video-wlglamor driver, which calls GEM flink outside of the radeon
winsys code and creates BOs from the flinked names using the same DRM file
descriptor.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
install-gallium-links.mk fails to create the compat link for ilo_dri.so
because it looks for dri_LTLIBRARIES instead of noinst_LTLIBRARIES. Fix this
by switching to dri_LTLIBRARIES (and make the driver installable).
Since pci_id_driver_map.h and the DDX both tell libGL.so to look for "i965",
ilo_dri.so will never be loaded even enabled and installed. The change should
not create any more confusion.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
The GL 4.4 spec says it's not color-renderable and not accepted
by RenderBufferStorage. The EXT_texture_shared_exponent spec says
it's not color-renderable but it's accepted by RenderBufferStorageEXT.
This seems to be a bug in the extension spec.
Let's do what GL 4.4 says.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
We can just check the polygon mode when updating the edge flag state.
Also, we can just flag ST_NEW_VERTEX_PROGRAM directly, which makes
ST_NEW_EDGEFLAGS_DATA useless.
Normally, nothing uses live intervals at this point, so this isn't
necessary. However, dump_instructions() calculates them and uses them
to show register pressure. So, calling dump_instructions() in this area
of the code would segfault due to the arrays being the wrong size.
This is not a candidate for stable branches because it only serves to
fix internal debugging code that you manually have to invoke by altering
the source code or using gdb.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Previously, dump_instruction() would print output such as:
{ 2} 3: mov vgrf1:F, u0:F
{ 3} 4: mov vgrf7:F, u0:F
{ 4} 5: mov vgrf8:F, u0:F
which looked like either a scalar access or perhaps a constant-indexed
access of element 0, when it was really a variable index.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
In commit e57d77280e, I fixed this for
destinations in the Vec4 backend, and sources in the scalar backend.
But not both types in both backends.
To prevent this mess from continuing, make the reg_encoding table
static, so only the disassembler can use it.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
opt_saturate_propagation_local compares scan_inst->dst.reg/reg_offset
with inst->src[0].reg/reg_offset, and ensures that scan_inst->dst.file
is GRF. But nothing ensured that inst->src[0].file was GRF.
In the following program, this resulted in u1:F matching vgrf1:UW,
and a saturate being incorrectly propagated from instruction 8 to
instruction 1.
{ 1} 0: add vgrf0:UW, hw_reg1+8:UW, hw_reg0:V
{ 1} 1: add vgrf1:UW, hw_reg1+10:UW, hw_reg0:V
{ 1} 2: linterp vgrf6:F, hw_reg2:F, hw_reg3:F, hw_reg0:F
{ 2} 3: linterp vgrf27:F, hw_reg2:F, hw_reg3:F, hw_reg0+16:F
{ 4} 4: mov vgrf10+0.0:F, vgrf6:F
{ 3} 5: mov vgrf10+1.0:F, vgrf27:F
{ 6} 6: tex vgrf8+0.0:F, vgrf10+0.0:F
{ 5} 7: mov vgrf32:F, u1:F
{ 5} 8: mov.sat vgrf12:F, u1:F
From shader-db:
total instructions in shared programs: 1841932 -> 1841957 (0.00%)
instructions in affected programs: 5823 -> 5848 (0.43%)
I inspected two of the 25 hurt shaders, and concluded that they were
both hitting this bug, and not legitimately optimized.
This fixes bugs in Left 4 Dead 2 and Team Fortress 2, possibly among
others. The optimization pass didn't exist in 10.0, so this is only
a candidate for 10.1.
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
It turns out we can allow COHERENT storage/mappings all the time,
regardless of LLC vs non-LLC. It just means never using temporary
mappings to avoid GPU stalls, and on non-LLC we have to use the GTT intead
of CPU mappings. If we were to use CPU maps on non-LLC (which might be
useful if apps end up using buffer_storage on PBO reads, to avoid WC read
slowness), those would be PERSISTENT but not COHERENT, but doing that
would require us driving the clflushes from userspace somehow.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
It looks like there's no big difference for write-only workloads, but
using a CPU map means that if they happen to read without having set the
MAP_READ_BIT, they get 100x the performance for those reads.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
While in expected usage patterns nobody will ever hit this path, doubling
our bandwidth used seems like a waste, and it cost us extra code too.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
On LLC, it should always be better to use a cached mapping than the GTT.
On non-LLC, it seems pretty silly to try to optimize read performance for
the INVALIDATE_RANGE_BIT case. This will make the buffer_storage logic
easier.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Similar to the other cases, shift some weight/coord calculations to int
space. This should be slightly faster (on x86 sse it should actually safe one
instruction, and generally int instructions are cheaper).
The previous code used coords which were calculated as
(int) (f_coord * tex_size * 256) >> 8.
This is not only unnecessarily complex but can give the wrong texel due to
rounding for negative coords (as an example, after denormalization coords
from -1.0 to 0.0 should give -1, but this will give -1 for numbers from
-1.0-1/256 - 0.0-1/256.
Instead, juse use ifloor, dropping the shift stuff.
Unfortunately, this will most likely be slower - with arch rounding available
it shouldn't be too bad (trades a int shift for a round but also saves an int
mul (which is shared by all coords) but otherwise it's a mess.
The previous method for converting coords to ints was sligthly inaccurate
(effectively losing 1bit from the 8bit lerp weight). This is probably
especially noticeable when trying to draw a pixel-aligned texture.
As an example, for a 100x100 texture after dernormalization the texture
coords in this case would turn up as
0.5, 1.5, 2.5, 3.5, 4.5, ...
After the mul by 256, conversion to int and 128 subtraction, they end up as
0, 256, 512, 768, 1024, ...
which gets us the correct coords/weights of
0/0, 1/0, 2/0, 3/0, 4/0, ...
But even LSB errors (which are unavoidable) in the input coords may cause
these coords/weights to be wrong, e.g. for a coord of 3.49999 we'd get a
coord/weight of 2/255 instead.
Fix this by using round-to-nearest int instead of FPToSi (trunc). Should be
equally fast on x86 sse though other archs probably suffer a little.
Constify the offsets parameter to silence gcc warning 'assignment
from incompatible pointer type' due to function prototype miss-match.
Use a boolean changed as a shorthand for target != current_target.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
There is little point of continuing if fread returns zero, as it
indicates that either the file is empty or cannot be read from.
Bail out if fread returns zero after closing the file.
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Core drm defines that the handle is of type int, while all drivers
treat it as uint internally. Typecast the value to silence gcc
warning messages and be consistent amongst all drivers.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Commit 3805a864b1d(nv50: assert before trying to out-of-bounds access
samplers) introduced a series of asserts as a precausion of a previous
illegal memory access.
Although it failed to encapsulate loop within nv50_sampler_state_delete
effectively failing to clear the sampler state, apart from exadurating
the illegal memory access issue.
Fixes gcc warning "array subscript is above array bounds" and
"Nesting level does not match indentation" and "Out-of-bounds read"
defects reported by Coverity.
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
v2: Indent according to Mesa style, reuse sbc instead of making a new
swap_count field, and actually get a usable back before returning the
age of the back (fixing updated piglit tests). Changes by anholt.
Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com>
Reviewed-by: Robert Bragg <robert@sixbynine.org> (v1)
Reviewed-by: Adel Gadllah <adel.gadllah@gmail.com> (v2)
Reviewed-by: Eric Anholt <eric@anholt.net>
With the buffer_age code, I need to be able to potentially call this more
than once per frame, and it would be bad if a new special event showing up
meant I chose a different back mid-frame. Now, once we've chosen a back
for the frame, another find_back will choose it again since we know that
it won't have ->busy set until swap.
Note that this makes find_back return a buffer id instead of a backbuffer
index. That's kind of a silly distinction anyway, since it's an identity
mapping between the two (it's the front buffer that is at an offset).
Reviewed-By: Adel Gadllah <adel.gadllah@gmail.com>
This extension provides a way for an application to render to multiple
surfaces with different buffer formats without having to use multiple
contexts. An EGLContext can be created without an EGLConfig by passing
EGL_NO_CONFIG_MESA. In that case there are no restrictions on the surfaces
that can be used with the context apart from that they must be using the same
EGLDisplay.
_mesa_initialze_context can now take a NULL gl_config which will mark the
context as ‘configless’. It will memset the visual to zero in that case.
Previously the i965 and i915 drivers were explicitly creating a zeroed visual
whenever 0 is passed for the EGLConfig. Mesa needs to be aware that the
context is configless because it affects the initial value to use for
glDrawBuffer. The first time the context is bound it will set the initial
value for configless contexts depending on whether the framebuffer used is
double-buffered.
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
In eglCreateContext there is a check for whether the config parameter is zero
and in this case it will avoid reporting an error if the
EGL_KHR_surfacless_context extension is supported. However there is nothing in
that extension which says you can create a context without a config and Mesa
breaks if you try this so it is probably better to leave it reporting an
error.
The original check was added in b90a3e7d8b based on the API-specific
extensions EGL_KHR_surfaceless_opengl/gles1/gles2. This was later changed to
refer to EGL_KHR_surfacless_context in b50703aea5. Perhaps the original
extensions specified a configless context but the new one does not.
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Under GLES 3 it is not valid to pass GL_FRONT to glDrawBuffers. Instead,
GL_BACK has a magic interpretation which means it will render to the front
buffer on single-buffered contexts and the back buffer on double-buffered. We
were incorrectly setting the initial value to GL_FRONT for single-buffered
contexts. This probably doesn't really matter at the moment except that
presumably it would be exposed in the API via glGetIntegerv.
When we switch to configless contexts this is more important because in that
case we always want to rely on the magic interpretation of GL_BACK in order to
automatically switch between the front and back buffer when a new surface with
a different number of buffers is bound. We also do this for GLES 1 and 2
because the internal value doesn't matter in that case and it is convenient to
use the same code to have the magic interpretation of GL_BACK.
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
In GLES 3 it is not possible to select rendering to the front buffer and
instead selecting GL_BACK has the magic interpretation that it is either the
front buffer on single-buffered configs or the back buffer on double-buffered.
GLES 1 and 2 have no way of selecting the draw buffer at all. In that case we
were initialising the draw buffer to either GL_FRONT or GL_BACK depending on
the context's config and then leaving it at that.
When we switch to having configless contexts we ideally want Mesa to
automatically switch between the front and back buffer whenever a double-
or single-buffered surface is bound. To make this happen we can just allow
the magic behaviour from GLES 3 in GLES 1 and 2 as well. It shouldn't matter
what the internal value of the draw buffer is in GLES 1 and 2 because there
is no way to query it from the external API.
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Chad Versace
Michel Dänzer
Chia-I Wu
Marek Olšák
Aaron Watry
Kenneth Graunke
Eric Anholt
Jeff Muizelaar
Roland Scheidegger
Brian Paul
Niels Ole Salscheider
Emil Velikov
Anuj Phogat
Adel Gadllah
Neil Roberts
Ian Romanick
Carl Worth