This change mostly touches error handling code paths, where a
bug was found when the DRI driver failed to bind a new DRI
context. Specifically, the reason for it to fail was the window
system unable (for whatever reason) to provide the DRI drawable
with a buffer. In this instance, Mesa un-does the EGL bindings,
but doesn't restore the old DRI context, hence remaining in a
funny state. It's worth mentioning that despite trying, there
is no guarantee that the old DRI context can be restored,
depending on the runtime.
Before this change, if bindContext() failed then
dri2_make_current() would rebind the old EGL context and
surfaces and return EGL_BAD_MATCH. However, it wouldn't rebind
the DRI context and surfaces, thus leaving it in an
inconsistent and unrecoverable state.
After this change, dri2_make_current() tries to bind the old
DRI context and surfaces when bindContext() failed. If unable
to do so, it leaves EGL and the DRI driver in a consistent
state, it reports an error and returns EGL_BAD_MATCH.
Fixes: 4e8f95f64d ("egl_dri2: Always unbind old contexts")
Signed-off-by: Luigi Santivetti <luigi.santivetti@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5707>
dri2_make_current() has become hard to follow, address this by
splitting the semantic of needing a call to bindContext() and
its failure.
Cc: mesa-stable
Signed-off-by: Luigi Santivetti <luigi.santivetti@imgtec.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5707>
dri2_make_current() has become long and convoluted. Address
this by folding together multiple if blocks checking for the
same variable.
Cc: mesa-stable
Signed-off-by: Luigi Santivetti <luigi.santivetti@imgtec.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5707>
_EGLDriver was an empty wrapper around _EGLAPI, so let's only keep one
of them. "driver" represents better what's being accessed, so that's the
one we're keeping.
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5987>
This reverts commit 1b87f4058d.
dlclose() of the handle is perfectly reasonable, a follow-up NULL
assignment is missing.
As-is this causes a leak for nearly every platform, since they call
dri2_load_driver* initially, followed by a second swrast fallback call.
Some platforms even loop through the existing drivers probing.
Revert the commit and add the NULL check.
Fixes: 1b87f4058d ("egl/dri2: Don't dlclose() the driver on dri2_load_driver_common failure")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4084>
The __DRI_IMAGE_FORMAT_* part wants to be handled for the *101010
type formats as well. Factor out a common function for that task.
That again makes the piglit egl_ext_device_base test work again
for hardware drivers.
v2: Factor out a common function for that task.
v3: dri2_pbuffer_visuals -> dri2_pbuffer_visuals
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Fixes: 9acb94b623 "egl: Enable 10bpc EGLConfigs for platform_{device,surfaceless}"
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3790>
This change adds getImage/putImage callbacks to the swrast pbuffer
loader extension.
This fixes a recent crash with Weston as well as a crashing
test with classic swrast without an official gitlab issue.
v2: Determine bytes per pixel differently and fix non X11 builds.
v3: Plug memory leak and fix crash on out of bounds access.
(Daniel Stone)
v4: Follow the code structure of the wayland get/put image
implementation - hopefully being more obvious.
Handle 64 bits formats.
Use BufferSize directly.
(Emil Velikov)
v5: Change pixel size computation.
(Eric Engestrom)
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2219
Fixes: d6edccee8d "egl: add EGL_platform_device support"
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3711>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3711>
This function is meant for when the attribute is unknown at compile-time
(eg. user-specified), but in all these cases it is much simpler to just
read/write the member directly.
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3816>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3816>
This reverts commit 34b1aa957a.
This series caused unexpected flickering artifacts with Iris driver on
Chrome OS and EGL_EXT_image_flush_external spec has not been published
yet.
Acked-by: Eric Engestrom <eric@engestrom.ch>
Acked-by: Kristian H. Kristensen <hoegsberg@google.com>
This reverts commit c1c574fdf1.
This series caused unexpected flickering artifacts with Iris driver on
Chrome OS and EGL_EXT_image_flush_external spec has not been published
yet.
Acked-by: Eric Engestrom <eric@engestrom.ch>
Acked-by: Kristian H. Kristensen <hoegsberg@google.com>
When users pass a config to `eglCreateWindowSurface` it requests double
buffering, but if the config doesn't have the appropriate `__DRIconfig`,
`eglCreateWindowSurface` fails with a `EGL_BAD_MATCH`.
Given that such behaviour is completely unacceptable, we drop the
`EGL_WINDOW_BIT` if we don't have at least one `__DRIconfig` supporting double
buffering, otherwise dropping the `EGL_PIXMAP_BIT`.
Fixes: 049f343e8a "egl: Allow 24-bit visuals for 32-bit RGBA8888 configs"
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67676
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hal Gentz <zegentzy@protonmail.com>
This commit does this by allowing both RGB and RGBA visuals to match with
EGL configs. We also expose the `EGL_MESA_config_select_group` egl
extension, which is similar to GLX's visual select group extension, to
allow the RGBA visuals to get less priority.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67676
Fixes: 049f343e8a "egl: Allow 24-bit visuals for 32-bit RGBA8888 configs"
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hal Gentz <zegentzy@protonmail.com>
... because it's wrong to do so. The error path out of
dri2_initialize_drm ends with dri2_display_destroy, which calls
functions in the vtable we're trying to set up, so if we dlclose the
driver then those function pointers will point off into space and things
crash.
Noticed this because after !1923 eglinfo would crash when setting up the
GBM platform. This was something of a cascade failure, because my kernel
is too old for DRM_IOCTL_I915_GETPARAM to work without DRM_AUTH, so i965
wouldn't load. platform_drm.c then got very confused when it tries to
load swrast as a dri2 driver.
Reviewed-by: Eric Anholt <eric@anholt.net>
Found when building for Android in C99 mode. Include bitscan.h to ensure ffs is
available.
Fixes: 7b4ed2b5 ("egl: Convert configs to use shifts and sizes instead of masks")
Signed-off-by: Kevin Strasser <kevin.strasser@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
For example, the surfaceless platform only supports pbuffers. If the
driver supports MSAA, we would still create a config, but it would have
no supported surface types. That's meaningless, so don't do it.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Define and set a new loader cap DRI_LOADER_CAP_FP16, indicating that gbm can
handle fp16 formats.
Signed-off-by: Kevin Strasser <kevin.strasser@intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
In the case that __DRI_ATTRIB_FLOAT_BIT is set in the dri config, set
EGL_COLOR_COMPONENT_TYPE_FLOAT_EXT in the egl config. Add a field to the
platform driver visual to indicate if it has components that are in floating
point form.
Signed-off-by: Kevin Strasser <kevin.strasser@intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Change dri2_add_config to take arrays of shifts and sizes, and compare with
those set in the dri config. Convert all platform driver masks
to shifts and sizes.
In order to handle older drivers, where shift attributes aren't available,
we fall back to the mask attributes and compute the shifts with ffs.
Signed-off-by: Kevin Strasser <kevin.strasser@intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
We get a getDrawableInfo() call in the MakeCurrent path, which
platform_device was handling correctly by returning the pbuffer's
width/height but platform_surfaceless segfaulted for. Reuse
platform_device's implementation.
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Use the DRI2 interface callback to pass the damage rects to
the driver.
Signed-off-by: Harish Krupo <harishkrupo@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Tested-by: Qiang Yu <yuq825@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The intension of the KHR_partial_update was not to send the damage back
to the platform but to send the damage to the driver to ensure that the
following rendering could be restricted to those regions.
This patch removes the set_damage_region from the egl_dri vtbl and all
the platfrom_*.c files.
Then upcomming patches add a new dri2 interface for the drivers to
implement
Signed-off-by: Harish Krupo <harishkrupo@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Tested-by: Qiang Yu <yuq825@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
>From the EGL_KHR_create_context spec:
"* If OpenGL 3.1 is requested, the context returned may implement
any of the following versions:
* Version 3.1. The GL_ARB_compatibility extension may or may
not be implemented, as determined by the implementation.
* The core profile of version 3.2 or greater."
Fixes CTS tests:
dEQP-EGL.functional.create_context_ext.gl_31.rgb888_depth_stencil
dEQP-EGL.functional.create_context_ext.robust_gl_31.rgb888_depth_stencil
dEQP-EGL.functional.create_context_ext.gl_31.rgb888_depth_no_stencil
dEQP-EGL.functional.create_context_ext.robust_gl_31.rgb888_depth_no_stencil
dEQP-EGL.functional.create_context_ext.gl_31.rgba8888_depth_no_stencil
dEQP-EGL.functional.create_context_ext.gl_31.rgb888_no_depth_no_stencil
dEQP-EGL.functional.create_context_ext.robust_gl_31.rgba8888_depth_no_stencil
dEQP-EGL.functional.create_context_ext.robust_gl_31.rgb888_no_depth_no_stencil
dEQP-EGL.functional.create_context_ext.gl_31.rgba8888_no_depth_no_stencil
dEQP-EGL.functional.create_context_ext.robust_gl_31.rgba8888_no_depth_no_stencil
dEQP-EGL.functional.create_context_ext.gl_31.rgba8888_depth_stencil
dEQP-EGL.functional.create_context_ext.robust_gl_31.rgba8888_depth_stencil
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
MAYBE_UNUSED is going away, so let's replace legitimate uses of it with
UNUSED, which the former aliased to so far anyway.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This fixes eglExportDMABUFImageQueryMESA() so it will report the
modififers of the underlying image. Without this information,
re-importing will likely be broken as it is rare these days that no
modifiers are used.
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Fixes: 8f7338f284 ("egl: add initial EGL_MESA_image_dma_buf_export v2.4")
In the call arguments to dri2_create_drawable decouple loaderPrivate
from dri2_surf. For all callers of dri2_create_drawable the two
pointers are the same with the exception of the gbm backed platform.
Let the calling code of dri2_create_drawable decide what
loaderPrivate shall be.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
This new 'platform' is added by default with no guards.
It is effectively a copy of the surfaceless one, with updated function
names and brand new probe function.
Due to the reuse, some of the ifdef HAVE_SURFACELESS_PLATFORM guards
have been dropped.
A worthy mention are the changes in _egFindDisplay, since the original
and dup'd fd are required, we make use of the plat_opt argument.
Note that no hacks for eglGetDisplay are added - the API works only with
the eglGetPlatformDisplay* API.
v2:
- s/_eglCompareDeviceDisplay/_eglSameDeviceDisplay/ (Eric)
- let ^^ return bool (Eric)
- fixup meson build, move files() further up (Eric)
- copy from plat. surfaceless w/o the visual cleanups
- close and free when destroying the dpy
- sprinkle a few _eglDeviceSupports
- split fd handling into separate function
- use directly the render node if no FD is given (Mathias)
v3:
- s/dpy/disp/g
- drop swap_buffers* callbacks
- drop loader_set_logger()
- drop local define
- re-introduce _eglGetDRMDeviceRenderNode()
- EGL_WARN on ForceSoftware with HW device - continue using the HW device
- bail out for "EGL_MESA_device_software" until it's fixed
- wire-up the Android build
v4:
- use new style _eglFindDisplay()
- split hw vs sw code paths
- don't close the internal fd (already handled in FiniDisplay())
- make swrast work (bit hacky bit will do for now)
- Android for real, drop autotools
- Correct HW + LIBGL_ALWAYS_SOFTWARE check
- use the dri2_create_drawable() helper
v5:
- enhance comment around fd checks (Mathias)
- rebase for dri2_init_surface() changes
Cc: Mathias Fröhlich <Mathias.Froehlich@gmx.net>
Acked-by: Marek Olšák <marek.olsak@amd.com> (v4)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Wrap the loader->createNewDrawable() dance into a helper and use it
throughout the codebase.
This addresses a cases like surfaceless (SL) on swrast (SL on kms_swrast
is fine) where we'd attempt using the wrong driver and crash out.
v2: fixup quirky GBM (Mathias)
v3: fixup GBM for real (Marek)
Cc: mesa-stable@lists.freedesktop.org
Cc: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Mathias Fröhlich <Mathias.Froehlich@web.de> (v1)
Reviewed-by: Marek Olšák <marek.olsak@amd.com> (v1)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com> (v2)
Signed-off-by: Marek Olšák <marek.olsak@amd.com> (v2)
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Each platform stores this in a different place:
- platform_drm uses dri2_surf->gbm_surf->base
- platform_android uses dri2_surf->window
- platform_wayland uses dri2_surf->wl_win
- platform_x11 uses dri2_surf->drawable
- platform_x11_dri3 uses dri3_surf->loader_drawable.drawable
- haiku doesn't even store it!
We need access to the native surface since the specification asks us
to refuse creating a new surface if there's already an EGLSurface
associated with native_surface.
An alternative to this patch would be to create a new
API.GetNativeWindow callback that each platform would have to
implement. While that's something we can definitely do, I prefer
this approach.
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Sometimes there is no X11 platform.
Signed-off-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
For formats with multiple planes, application will pass a num_planes
sized fds array which should be initialized properly in case fds amount
utilized by the driver is less than the number of planes.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
indexConfigAttrib iterates over every index in the dri driver, possibly
exceeding __DRI_ATTRIB_MAX. In other words, if the dri driver has newer
attributes libEGL will end up reading from uninitialized memory through
dri2_to_egl_attribute_map[].
Signed-off-by: Kevin Strasser <kevin.strasser@intel.com>
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
In addition to adding this format to the dri_interface header,
add an entry in the android and wayland backends as well.
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
The difference between the three functions is the list of mandatory
driver extensions. Pass that as an argument to the common helper.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>