And consolidate it all into a single job.
It doesn't take much longer than a single version, thanks to ccache.
Overall, this single job might be faster or at least use fewer CPU
cycles than the two jobs before, while covering thrice as many versions
of LLVM.
v2:
* Move "rm -rf _build" to meson-build.sh.
* Set GALLIUM_DRIVERS the same way both times in the meson-clover job,
for symmetry.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com> # v1
No functional change intended (except for no longer running meson
--version separately, as the version appears early in meson's output
anyway).
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
We really shouldn't ever need a suffix, otherwise it indicates a failure
in coordination. :) In which case, it doesn't really matter how the tag
is disambiguated.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
meson git now has a cmake find method for llvm, but it lacks a couple of
features that we use from the config tool version. Until that reaches
parity we need to use the config-tool version.
CC: 19.0 19.1 <<mesa-stable@lists.freedesktop.org>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Once mem->bo is removed from the cache, it is likely to be freed.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: b80930a6fe ("anv: add support for VK_EXT_memory_budget")
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
We use a mix of MI & PIPE_CONTROL commands to write our queries' data
(results & availability). Those commands' memory write order is not
guaranteed with regard to their order in the command stream, unless CS
stalls are inserted between them. This is problematic for 2 reasons :
1. We copy results from the device using MI commands even though
the values are generated from PIPE_CONTROL, meaning we could
copy unlanded values into the results and then copy the
availability that is inconsistent with the values.
2. We allow the user to poll on the availability values of the
query pool from the CPU. If the availability lands in memory
before the values then we could return invalid values.
This change does 2 things to address this problem :
- We use either PIPE_CONTROL or MI commands to write both
queries values and availability, so that the ordering of the
memory writes guarantees that if availability is visible,
results are also visible.
- For the occlusion & timestamp queries we apply a CS stall
before copying the results on the device, to ensure copying
with MI commands see the correct values of previous
PIPE_CONTROL writes of availability (required by the Vulkan
spec).
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reported-by: Iago Toral Quiroga <itoral@igalia.com>
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
It's generally frowned upon to have more than one H1 per document in
HTML4. So let's put the text directly inside the header. This means we
can drop the flex-based centering, which makes things a bit easier. We
also need to change the padding to rem instead of em, because the em has
now changed.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
We're pretty insonsistent in what the headings and titles are, especially
compared to what the articles are listed as in the sidebar. Let's
harmonize this.
There's a notable exception for meson.html, where the sidebar uses a
short-hand form that makes sense in the sidebar, but not in the article
due to the visible context being different.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
It's generally frowned upon to have multiple H1 headings in HTML4. So
let's make sure each article has a primary heading for the article, and
that that heading is the title that is used in the sidebar.
While we're at it, let's update the title in the articles to match the
title from the sidebar as well.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
It's generally frowned upon to have multiple H1 headings in HTML4. So
let's add a primary heading for the article, and source that from the
title used in the sidebar.
While we're at it, let's update the title in the article to match the
title from the sidebar as well.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
We generally use title-casing for headings in the sidebar. But not
all headings was constently cased like that. Let's make sure this
is consistent.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
There's no need to keep this short, we can just spell out "and" here.
Besides, a slash kind of implies "or", but these articles are about
both of these, not either.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
It's quite visible that there's more docs below, we don't need to spell
it out for the reader.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
We're not short on space here, so there's little point in abbreviating
this. This also matches the heading in the article.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
We're not short on space here, so let's just spell out "and" instead of
using the ampersand. This is more consistent with the entry above in the
sidebar.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
This ports commit 9e7b0988d6 from anv
to i965. Thanks to Lionel for noticing that it was missing!
Fixes: 01058a5522 i965: Add virtual memory allocator infrastructure to brw_bufmgr.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This should happen regardless, but let's be paranoid.
Fixes: 01058a5522 i965: Add virtual memory allocator infrastructure to brw_bufmgr.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The STATE_BASE_ADDRESS "Size" fields can only hold 0xfffff in pages,
and 0xfffff * 4096 = 4294963200, which is 1 page shy of 4GB.
So we can't use the top page.
Fixes: 01058a5522 i965: Add virtual memory allocator infrastructure to brw_bufmgr.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
In the FS IR we pretend that the instruction is predicated with (+f0.1)
just for flag dependency tracking purposes. Since the instruction
doesn't support predication before Haswell, we unset the predicate so we
should also unset the flag register so that we can round-trip the
disassembly.
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
On haswell, for dim instruction we encode immediate float value operand
into double float,
v2: Fix comment (Matt Turner)
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
For the W or UW (signed or unsigned word) source types, the 16-bit value
must be replicated in both the low and high words of the 32-bit
immediate value.
v2: Fix replication in other places as well
V3: fix a few nits (Matt Turner)
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Print quad value same as unsigned quad so that we can distinguish in
between quater control disassembled values for e.g 1/2/3[Q] and
immediate quad value for e.g 1Q. This allows round-tripping through the
assembler/disassembler.
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
If we leave offset uninitialized, access to store
will be random depending on stack value and can
segfault.
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Tool is inspired from igt's assembler tool. Thanks to Matt Turner, who
mentored me through out this project.
v2: Fix memory leaks and naming convention (Caio)
v3: Fix meson changes (Dylan Baker)
v4: Fix usage options (Matt Turner)
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Closes: https://gitlab.freedesktop.org/mesa/mesa/merge_requests/141
this adds support for imports where the image data begins at an offset
from the start of the buffer, as used in h/x264
fixeskwg/mesa#47
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Brian noticed there was an uninitialized var for the 8-wide case and 128
bit blocks, which made it always crash. Likewise, the 64bit block case
had another crash bug due to type mismatch.
Color decode (used for all s3tc formats) also had a bogus shuffle for
this case, leading to decode artifacts.
Fix these all up, which makes the code actually work 8-wide. Note that
it's still not used - I've verified it works, and the generated assembly
does look quite a bit simpler actually (20-30% less instructions for the
s3tc decode part with avx2), however in practice it still seems to be
sligthly slower for some unknown reason (tested with openarena) on my
haswell box, so for now continue to split things into 4-wide vectors
before decoding.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
GP doesn't support sin/cos natively, so we have to lower them.
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Tested-by: Qiang Yu <yuq825@gmail.com>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Lower sin and cos using Nick's fast sin/cos approximation from
https://web.archive.org/web/20180105155939/http://forum.devmaster.net/t/fast-and-accurate-sine-cosine/9648
It's suitable for GLES2, but it throws warnings in dEQP GLES3 precision tests.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Tested-by: Qiang Yu <yuq825@gmail.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
For a6xx, we construct/emit a single VS const state used for both
binning pass and draw pass. So far we were mostly getting lucky that
there were not (obvious) mismatches between the const_state (like
different lowered immediates) between the binning and draw pass
VS ir3_shader_variant.
And I guess this situation will come up more as GS and tess is added
into the equation.
Since really everything about the const state is not specific to the
variant, move this. The main exception is lowered immediates, but these
are the last to appear in the layout, and it doesn't hurt for each new
shader variant to just append any immed's it lowers to the end of the
immediate state.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Next patch moves const_state to ir3_shader, before the compile context
is created. So move the code around in prep to call it earlier.
Signed-off-by: Rob Clark <robdclark@chromium.org>
They are really part of the constant state, and it will moving things
from ir3_shader_variant to ir3_shader if we combine them.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Combine the offsets of differenet parts of the constant space with (what
was formerly known as) ir3_driver_const_layout. Bunch of churn, but no
functional change.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Move to ir3_compiler so it doesn't depend on the compile context. Prep
work for moving constant state from variant (where we have compile
context) to shader (where we do not).
Signed-off-by: Rob Clark <robdclark@chromium.org>
Michel Dänzer
Dylan Baker
Brian Paul
Ian Romanick
Lionel Landwerlin
Timothy Arceri
Erik Faye-Lund
Kenneth Graunke
Matt Turner
Sagar Ghuge
Mika Kuoppala
Mike Blumenkrantz
Roland Scheidegger
Juan A. Suarez Romero
Vasily Khoruzhick
Rob Clark