The goal is to use radv_barrier()/radv_subpass_barrier() as
much as possible for further optimizations.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Inherited commands buffers are not supported.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
VK_EXT_conditional_rendering allows to discard draw commands
(not only normal draws).
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
VK_EXT_conditional_rendering allows to discard dispatch commands.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
We don't need to emit PS_PARTIAL_FLUSH for the pre fragment shader
stages (ie. geometry/tessellation). Emitting VS_PARTIAL_FLUSH
is enough for these stages. Note that PS_PARTIAL_FLUSH also
synchronizes all vertex stages.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
If we know that the given image doesn't have any metadata,
we don't need to flush.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Now that 'set' can't be NULL because the meta operations no
longer bind a NULL descriptor, the logic can be simplified
a little bit.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
I don't want to waste CPU cycles for nothing.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
We mostly use the same priority for all buffer objects, so
I don't think that matter much. This should reduce CPU
overhead a little bit.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
A ZPASS_DONE or PIXEL_STAT_DUMP_EVENT (of the DB occlusion
counters) must immediately precede every timestamp event to
prevent a GPU hang on GFX9.
Cc: 18.1 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
VkCreateRenderPass2KHR() is quite similar to VkCreateRenderPass()
but refactoring the code is a bit painful.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Needed for VK_KHR_create_renderpass2.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This might fix some synchronization issues. I don't know if
that will affect performance but it's required for correctness.
CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
That might reduce CPU overhead a little bit when using
RADV_TRACE_FILE.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The number of enabled descriptors for a given pipeline stage
can be computed at compile time.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
For merged shaders, VS as HS for example.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
If the given image doesn't enable CMASK, FMASK or DCC that's
useless to flush CB metadata.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
If the given image doesn't have HTILE, that's useless to flush
DB metadata.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
GCC 4.8 fails to compile with "static const", while GCC 8.1
fails to compile with only "static".
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Always emitting a bottom-of-pipe event is quite dumb. Instead,
start to optimize these functions by syncing PFP for the
top-of-pipe and syncing ME for the post-index-fetch event.
This can still be improved by emitting EOS events for
syncing PS and CS stages.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This introduces radv_barrier() (same as the draw/dispatch codepath).
This helper is used for merging the code from CmdWaitEvents() and
CmdPipelineBarrier because it's quite similar.
We do ignore the source stage mask for CmdWaitEvents because
it's irrelevant when event objects are used.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The Vulkan spec says:
"pipelineBindPoint is a VkPipelineBindPoint indicating whether
the descriptors will be used by graphics pipelines or compute
pipelines. There is a separate set of bind points for each of
graphics and compute, so binding one does not disturb the other."
CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
From the Vulkan spec:
"If this is a primary command buffer, then this value is ignored."
CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
If the driver ends up by performing a slow depthstencil clear,
the HTILE metadata won't be initialized correctly.
This fixes random VM faults on Polaris while running CTS
with Bas's runner. This doesn't seem to regress performance.
CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Having random data in there is probably not the best.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This might eventually skip some useless DCC decompression
passes.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Drops the number of time we set the scissor by 4x for F1 2017,
which results in a consistent performance improvement of about 4%.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This fixes a rendering regression with RoTR.
This reverts commit 4bdad9fadd.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
And replace _regs by _metadata because it makes more sense.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
I don't think that matter much to emit both values and that
makes the code a bit simpler.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
It's unnecessary to update the fast depth/stencil clear values
if the fast cleared depth/stencil image isn't currently bound.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
And replace _regs by _metadata because it makes more sense.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
It's unnecessary to update the fast color clear values if the
fast cleared color image isn't currently bound.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
On GFX8+, there is a bug that affects TC-compatible depth surfaces
when the ZRange is not reset after LateZ kills pixels.
The workaround is to always set DB_Z_INFO.ZRANGE_PRECISION to match
the last fast clear value. Because the value is set to 1 by default,
we only need to update it when clearing Z to 0.0.
We also need to set the depth clear regs and to update
ZRANGE_PRECISION when initializing a TC-compat depth image to 0.
Original patch from James Legg.
This fixes random CTS fails with
dEQP-VK.renderpass.suballocation.formats.d32_sfloat_s8_uint.input.*
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105396
CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This was not previously handled correctly. For example,
push_constant_stages might only contain MESA_SHADER_VERTEX because
only that stage was changed by CmdPushConstants or
CmdBindDescriptorSets.
In that case, if vertex has been merged with tess control, then the
push constant address wouldn't be updated since
pipeline->shaders[MESA_SHADER_VERTEX] would be NULL.
Use radv_get_shader() instead of getting the shader directly so that
we get the right shader if merged. Also, skip emitting the address
redundantly - if two merged stages are set in push_constant_stages
this change would have made the address get emitted twice.
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Cc: "18.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This was being handled in a few different places, consolidate it into a
single radv_get_shader() function.
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Cc: "18.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Errors are not that common of a case so we can eat a slight perf
hit in having to call a function and do a runtime check.
In turn this makes debugging random errors happening for end users
easier, because they don't have to have a debug build on hand.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This was terribly wrong, I forced use of 32-bit pointers when
emitting shader descriptor pointers. This fixes GPU hangs with
LLVM 5&6 because 32-bit pointers are only supported with LLVM 7.
Fixes: 88d1ed0f81 ("radv: emit shader descriptor pointers consecutively")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This reduces the number of SET_SH_REG packets which are emitted
for applications that use more than one descriptor set per stage.
We should be able to emit more SET_SH_REG packets consecutively
(like push constants and vertex buffers for the vertex stage),
but this will be improved later.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Samuel Pitoiset
Bas Nieuwenhuizen
Marek Olšák
Alex Smith