This will allow to propagate VK_ERROR_OUT_OF_HOST_MEMORY to
vkEndCommandBuffer() when necessary.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Recording secondaries with no framebuffer attachment may
make this happen, though this might not be the complete solution.
(esp if someone does meta stuff in there, would we have to
save things, not sure).
Fixes: f4e499ec79 ("radv: add initial non-conformant radv vulkan driver")
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
GFX9 needs the SX MRT blend registers programmed, port over
the code from radeonsi to workout the values from the blend
state, and program the registers on rbplus systems.
This fixes lots of:
dEQP-VK.pipeline.blend.*
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
For the GFX9 packet we need one more dword.
Fixes an assert in:
dEQP-VK.draw.shader_draw_parameters.base_vertex.draw_indexed
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This fixes disabled Z/stencil.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is also a GFX9 register.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This seems like a workaround, but we don't see the bug on CIK/VI.
On SI with the dEQP-VK.memory.pipeline_barrier.host_read_transfer_dst.*
tests, when one tests complete, the first flush at the start of the next
test causes a VM fault as we've destroyed the VM, but we end up flushing
the compute shader then, and it must still be in the process of doing
something.
Could also be a kernel difference between SI and CIK.
v2: hit this with a bigger hammer. This fixes a bunch of hangs
in the vk cts with the robustness tests.
Fixes: f4e499ec79 ("radv: add initial non-conformant radv vulkan driver")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101334
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This reduces the number of BOs that we need for the BO lists during
a submission.
Currently uses a fairly simple linear search for finding free space,
that could eventually be improved to a binary tree, which with some
per-node info could make a check for space O(1) and finding it O(log n),
in the number of buffers in that slab.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This just sets them to INVALID COLOR, instead of shifting the
attachments together.
This also fixes a number of cases where we use it first and only
then check if it is VK_ATTACHMENT_UNUSED.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Fixes: f4e499ec79 "radv: add initial non-conformant radv vulkan driver"
Reviewed-by: Dave Airlie <airlied@redhat.com>
When using DCC some clear values don't require a cmask eliminate
step. This patch adds support for black and black with alpha 1,
there are other values, but I don't have access to a comprehensive list.
This works by setting the cmask eliminate predicate when doing the
fast clear, and later when doing the cmask elimination making sure
the draws are predicated.
This increases the fps on Sascha Willems deferred.
Tonga: 580fps->670fps on a Tonga PRO card.
Polaris 730->850fps
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Some of the Sascha Willems demos pick a D32/S8 format for the depth
buffer, then do a LOAD_OP_CLEAR/LOAD_OP_DONT_CARE on it, which means
we don't get to merge the undefined->depth and clear htile transitions.
This add the stencil aspect to the pending clears if there is a depth
clear pending and the stencil aspect is don't care.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This doesn't get used yet, it just adds support to various PKT3
emissions to enable it later.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
coverity complains about the deref before NULL check.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Before bcae327469 this was emitting CP DMA packet even on SI, but
apparently hasn't caused too many problems. After that commit the
CP DMA code now always sets the CIK+ only bit for prefetch. Just
follow radeonsi there and don't try to prefetch at all.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101334
Fixes: bcae327469 "radv: realign cp dma code with radeonsi"
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This just moves lots of stuff to the bind stage rather than
dealing with it in the draw stage.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
There is no need to calculate this at draw time.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
I want to use these in the pipeline setup stage.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Divides are pretty slow, and this is in the hot path of a draw.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
These are just some register changes ported from radeonsi for gfx9.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
These are ported from radeonsi, don't know all the rules for
when they should be inserted.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds some rb+ support, as on GFX9 we have to disable
it as per radeonsi.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
GFX9 needs to write event EOP to a fence buffer, allocate some
space for this, and just write an ever increasing number to it,
this isn't exactly what radeonsi does, but it seems to work.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just adds support for initialising some GFX9 registers,
and handles the different init for the VGT reuse reg.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just adds the strings and includes the gfx9 register defs
in some files that we need them in.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just collapses a few per-stage things into a loop,
shouldn't affect anything.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Sets could have been ignored during previous descriptor set flush
due to the shader not using them and therefore no SGPR being assigned.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Fixes: ae61ddabe8 "radv: move userdata sgpr ownership to compiler side."
We clear the descriptors_dirty array afterwards, so the SGPRs for
the other pipeline don't get updated on the flush for that other
draw/dispatch, so we have to make sure we do it immediately.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Fixes: ae61ddabe8 "radv: move userdata sgpr ownership to compiler side."
In prep for GFX9 refactor some of the eop event writing code
out.
This changes behaviour, but aligns with what radeonsi does,
it does double emits on CIK/VI, whereas previously it only
did this on CIK.
v2: bump the size checks.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This code was in a few places, consolidate into one.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
0x30f regressed mad max.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Fixes: df91abfe5a "radv: Use correct clear words for HTILE."
flush_compute_state doesn't reserve a large chunk, so these need their own reservation.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Fixes: f4e499ec79 "radv: add initial non-conformant radv vulkan driver"
Did some RE'ing what several HTILE words give when read from a descriptor
with HTILE compression enabled.
Seems to align with -pro usage for D16 too.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
And correct implementation to specify only what we support.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This drops the resolve workarounds that change an image
tiling mode behinds it's back, this is horrible and breaks
the image_view->image relationship. Remove all this.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
radv_bind_descriptor_set cannot be used to bind a push descriptor set
since a push descriptor set does not have a buffer list. However,
there is no need to add the buffers again when restoring a set, so
this fix is also an optimization.
Cc: "17.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Fredrik Höglund <fredrik@kde.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
All of the dynamic states apply to rasterization & fragment processing,
so we don't need to set them if we don't rasterize.
We don't clear the dirty flags for them though, so we don't miss any
updates for the next pipeline with rasterization.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Fixes: 76603aa90b "radv: Drop the default viewport when 0 viewports are given."
We would be storing this info twice per image, no need to,
remove it from the surface struct.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is to rework the surface code like radeonsi.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Gives me approximately a 2% perf increase in bot dota2 & talos.
Having descriptors (both sets and vertex buffers) prefetched
didn't help so I didn't include that.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This bumps the limit to the number of sets to 32, now that
we have proper support for it. It also uses 1u in a few places
to make things a bit safer.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
We want to expose more descriptor sets to the applications,
but currently we have a 1:1 mapping between shader descriptor
sets and 2 user sgprs, limiting us to 4 per stage. This commit
check if we don't have enough user sgprs for the number of
bound sets for this shader, we can ask for them to be indirected.
Two sgprs are then used to point to a buffer or 64-bit pointers
to the number of allocated descriptor sets. All shaders point
to the same buffer.
We can use some user sgprs to inline one or two descriptor sets
in future, but until we have a workload that needs this I don't
think we should spend too much time on it.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
In practice this will probably just drop draw id in a few places.
v2: just do draw_id for now. (Bas)
it might be possible to do something more if we need it in the
future. (nha)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
There is some radv specific info we need to gather from shaders
before we get into converting nir->llvm, so we can make
better decisions especially around user sgpr allocation.
This is just an initial placeholder to gather if sample positions
are required in the frag shader.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This allows meta to use push descriptors without disturbing user
push descriptors.
radv_meta_push_descriptor_set differs from vkCmdPushDescriptorSetKHR
in that partial updates are not supported; all descriptors used in
subsequent draw commands must be pushed at the same time.
Signed-off-by: Fredrik Höglund <fredrik@kde.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Most trace points happen after an operation, so add a trace point
at the start of the command buffer.
Furthermore, add one after a CmdUpdateBuffer using CP_DMA as that
didn't emit one yet.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
According to the Vulkan spec, VkPipelineInputAssemblyStateCreateInfo's
primitiveRestartEnable flag should only apply to indexed draws, however
it was being enabled regardless of the type of draw. This could cause
problems for non-indexed draws with >=65535 vertices if the previous
indexed draw used 16-bit indices.
Fixes corruption of the credits text in Mad Max.
v2: Reset primitive restart state after executing a secondary command
buffer.
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This appears to be a leftover from an earlier version of this function.
Nothing is emitted into the CS.
Signed-off-by: Fredrik Höglund <fredrik@kde.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
All offsets and strides are precomputed by
radv_CreateDescriptorUpdateTemplateKHR and stored in the template.
v2: Move the new struct declarations from radv_descriptor_set.h
to radv_private.h (Bas)
Signed-off-by: Fredrik Höglund <fredrik@kde.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The current code was broken, and I decided to redesign it instead.
This puts the sample positions for all samples into the queue
constant descriptor buffer after all the spill/ring descriptors.
It then uses a single offset register to point how far into the
samples the samples for num_samples are. This saves one user sgpr
and means we only generate the sample position data in the rare
single case where we need it currently.
This doesn't fix the failing CTS tests without the followup
fix.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This emits the tessellation shaders and state to the command stream.
It contains the logic to emit the LS/HS shaders.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This ports the VGT_VERTEX_REUSE register settings
for Polaris GPUs from radeonsi.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This patch adds support for the offchip rings for storing
tessellation factors and attribute data.
It includes the register setup for the TF ring
v2: always do tess ring size calcs (Bas)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just adds support for tess to the shader stage conversion
and emits the per-stage descriptors/constants for tess stages.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Vulkan Clipping is defined in terms of vertices, the scissor based
clipping happens on pixels. There is a difference with points and
lines, as a vertex can be outside the viewport while some pixels are in.
On Vulkan thoise pixels shouldn't be drawn, while they would be with
the guardband.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
With tess this becomes a bit more complex. so move to pipeline
for now.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This also takes the side band setting code from radeonsi.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
There is no need to calculate this on each command submit.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
There is no need to recalculate this every time.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
In order to faciliate adding tess support, split the vs/es
output info into a separate block, so we make it easier to
have the tess shaders export the same info.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The logic was different than radeonsi, fix it up before adding
tess support.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
It reads @ writes the DB cache, and we haven't flushed dst caches yet,
so DB cache may be stale. Also the user might be shader read (and probably is),
so also flush after.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
CC: <mesa-stable@lists.freedesktop.org>
Fixes: f4e499ec79 ("radv: add initial non-conformant radv vulkan driver")
CP DMA and PKT3_WRITE_DATA (in CmdUpdateBuffer) don't (currently) write
through L2. Therefore, to make these writes visible to later accesses
we must invalidate L2 rather than just writing it back, to avoid the
possibility that stale data is read through L2.
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This was meant to be checking the index type to get the correct
index not the last emitted one. This fixes:
dEQP-VK.pipeline.input_assembly.primitive_restart.index_type_uint32.triangle_strip_with_adjacency
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "13.0 17.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This must be set to ICD_LOADER_MAGIC by vkAllocateCommandBuffers, which
was being done when allocating a new buffer but not when reusing an
existing one in the cache. This would hit an assertion and crash in
debug builds of the Vulkan loader.
Fixes: 682248db45 ("radv: Cache command buffers in command pool.")
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
I think we should only flush right before an action (draw/dispatch etc.),
as otherwise it is too easy to issue redundant flushes.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Without stores, the only writes are fast clears, transfers and metadata
initialization, each of which have the appropiate invalidations already.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
The data should always be in memory after a src flush.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This fixes the wrong dynamic buffer descriptors being updated when
firstSet > 0.
Cc: 17.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Fredrik Höglund <fredrik@kde.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
If we have any pending flushes on the primary command buffer, these
must be performed before executing the secondary buffer.
This fixes potential corruption when the contents of a subpass which
clears any of its render targets are given in a secondary buffer: the
flushes after a fast clear would not have been performed until the
vkCmdEndRenderPass call.
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: 13.0 17.0 <mesa-stable@lists.freedesktop.org>
Mainly to avoid gcc's complains about uninitialized ptr and offset use
later in that code.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
So that we don't keep allocating BOs for the IBs and upload buffers.
We run some risk of memory increase with e.g. a bimodal size
distribution of command buffers, but I haven't noticed a significant
increase with dota2 and talos.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Otherwise if the new compute pipeline is the same as the last used
pipeline before the call, we don't emit it again.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: 13.0 17.0 <mesa-stable@lists.freedesktop.org>
This adds support to write to sample mask from the fragment shader.
We can optimise this later like radeonsi.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The code was interpolating at the offset from the sample,
not the offset from the center. Also fix for persample interpolation
modes we should force the pixel center to be at the sample.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The preamble flushes now and the rest is the responsibility of the app.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This splits out the cache flush bit setting code
dependent on the src/dest access flags.
It then calls it from the subpass barrier code.
It also marks a TODO to remove the aggressive CS/PS
flushes at some point.
This fixes a bunch of the
dEQP-VK.renderpass.attachment_allocation.input_output.*
tests.
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just keeps popping up minor problems and regressions we should
revisit in a more sustainable manner later.
This also reverts:
Revert "radv: query cmds should mark a cmd buffer as having draws."
Revert "radv: also fixup event emission to not get culled."
This reverts commit d1640e7932.
This reverts commit 8b47b97215.
This reverts commit b4b19afebe.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This iterates the fast clear flush across the layers in the
specified range.
It also moves the compute resolve flush into the function
and builds the range in there.
This fixes:
dEQP-VK.geometry.layered.* regressions since fast clears.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
I assume this wants to check if all pipelines use the same SGPR for
the rings.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
This is possibly a bad idea, I might have to consider a better one.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This ports the remains of the workarounds from radeonsi for
the non-TESS cases. It should provide equivalent workarounds
for hawaii and bonarie.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This puts the common gfx state for the device into an
indirect buffer, and just calls out to it, on CIK and above.
This is taken from what radeonsi does.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
If a buffer is just full of flushes we flush things on command
buffer submission, so don't bother submitting these.
This will reduce some CPU overhead on dota2, which submits a fair
few command streams that don't end up drawing anything.
v2: reorganise loop to count first then malloc,
rename some vars (Bas)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The CTS tests at least are using this, and we were totally
ignoring it.
This hopefully fixes the bouncing multisample CTS tests.
v2: get family mask in ignored case from command buffer.
v3: only change things in one place, use logic from Bas.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Fixes:
dEQP-VK.geometry.layered.1d_array.fragment_layer
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This emits the compiled geometry shader and other state registers.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This uses the scratch infrastructure to handle the esgs
and gsvs rings.
(this replaces the old code that did this with patching).
v2: fix correct ring sizes, reset sizes (Bas)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This emits the shader to the ES block in the correct case.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This enables the paths for setting up user ptrs to vs/es and gs.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is to later allow ES shaders to be emitted.
Review-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Prevent Coverity seeing potential errors when src is
no initialized in the switch case.
Coverity-Id: 1396397
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This is part of the spec and fixes CTS tests:
dEQP-VK.api.object_management.alloc_callback_fail_multiple.command_buffer_*
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Along the lines of what
3b804819 anv: Default PointSize to 1.0 if not written by the shader
does for anv, program a default point size in the hw of 1.0.
This preempt fixes a bunch of geom shader tests.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This fixes some issues we'd hit later if using viewport
indexes.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just adds the infrastructure to allow writing layer
and viewport index. It's just a first patch out of the geom
shader tree, and doesn't do much on its own.
v2: add missing if statement change (Bas)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
v2:
- Now use the filename specified by RADV_TRACE_FILE env var.
- Use the same var to enable tracing.
I thought we could as well always set the filename explicitly
instead of having some arbitrary defaults, and at that point
we don't need a separate feature enable.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
(airlied: fixes DOOM hang with compute queue enabled)
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
(cc'ing stable as I'd like to backport the ubo speedup as well)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "13.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This isn't fully what we want yet, but is a good step on the way.
This allows the compiler to create the information structures
for the state setting side, however the state setting still expects
things to be pretty much in 2 sgpr wide register sets, and can't
handle the indirect setting yet.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just refactors out some common code to make future changes
easier to understand.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just splits some common code into a utility function.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This copies the push constant code and only binds descriptor
sets to the stages that need them. It also now has to dirty
descriptors on pipeline binds.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is another step towards having the compiler decide the
user sgpr layout.
This still emits the descriptors sets for all shader types, but
we will fix this later.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just moves this into a separate function.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>