The spec requires the number of buffer to be greater than 0.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This saves some useless CMASK initializations/eliminations in
the Vulkan SSAO demo.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
My guess is that the GPU is going to report VM faults if
vkCmdDrawIndirectCountAMD() (and friends) are used.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
These registers don't change during the lifetime of the
command buffer, there is no need to re-emit them when
binding a new pipeline.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Ported from RadeonSI, and -pro seems to enable it as well.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
We only need to dirty the descriptors when the pipeline is
a new one, because user SGPRs can be potentially different.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
To check a valid usage requirement.
CID: 1401616
Signed-off-by: Mun Gwan-gyeong <elongbug@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
The number of viewports/scissors can only be specified at pipeline
creation time, so make sure to copy them when binding a new one
because the dynamic state is cleared in BeginCommandBuffer().
Fixes: dcf46e995d ("radv: do not update the number of scissors in vkCmdSetScissor()")
Fixes: 60878dd00c ("radv: do not update the number of viewports in vkCmdSetViewport()")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
We are really not going to use a winsys which does not need to store
the va, so might as well store it in a standard field.
Not sure this helps perf much though, as most of the cost is in the
cache miss accessing the bo anyway, which we stil need to do.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Since most games use only a few, iterating through all of them is
a waste. Simplifies the code too.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
The Vulkan spec (1.0.61) says:
"The number of scissors used by a pipeline is still specified
by the scissorCount member of VkPipelinescissorStateCreateInfo."
So, the number of scissors is defined at pipeline creation
time and shouldn't be updated when they are set dynamically.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
The Vulkan spec (1.0.61) says:
"The number of viewports used by a pipeline is still specified
by the viewportCount member of VkPipelineViewportStateCreateInfo."
So, the number of viewports is defined at pipeline creation
time and shouldn't be updated when they are set dynamically.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Also, it's useless to set the error code twice. Though, we
should probably skip the next commands when the command buffer
is considered invalid.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
To dump them when a hang is detected.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
To improve GPU hangs detection when shaders are stucked.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
To share common code after every draw/compute calls.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
When a GPU hang is detected in radv_gpu_hang_occured() we know
which command buffer is faulty but the bound pipelines might
have been updated during the execution.
The pointers to the radv_pipeline objects are emitted just
after the second trace ID, that way it would be easy to dump
the active shaders at the moment of the hang.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Per the spec:
"Resetting a command buffer is an operation that discards any
previously recorded commands and puts a command buffer in the
initial state."
As far I'm concerned, that flag can be changed by calling
VkCmdPushConstants() (or any other functions which update it),
so it should be cleared as well.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
To be consistent with radv_emit_compute_pipeline().
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reduce size of radv_pipeline.c and improve code isolation. More
code can probably moved but it's a start.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
malloc() failures are unrelated to the device memory.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
A return code error is stored in the command buffer and should
be returned to the user via EndCommandBuffer().
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
In my opinion, this improves code readability.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Just to make sure we are using the set 0, because it's the
only one which is saved/restored when doing meta operations.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This fixes some observed hangs on CIK GPUs.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Useless to track which one has been updated because we
re-upload all the vertex buffers in one shot.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
malloc() failures are unrelated to the device memory.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Otherwise, the simultaneous uage bit doesn't get set from the begin
info, which we need for batchchaining.
Fixes: f4e499ec79 "radv: add initial non-conformant radv vulkan driver"
Reviewed-by: Dave Airlie <airlied@redhat.com>
This will allow to propagate VK_ERROR_OUT_OF_HOST_MEMORY to
vkEndCommandBuffer() when necessary.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Recording secondaries with no framebuffer attachment may
make this happen, though this might not be the complete solution.
(esp if someone does meta stuff in there, would we have to
save things, not sure).
Fixes: f4e499ec79 ("radv: add initial non-conformant radv vulkan driver")
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
GFX9 needs the SX MRT blend registers programmed, port over
the code from radeonsi to workout the values from the blend
state, and program the registers on rbplus systems.
This fixes lots of:
dEQP-VK.pipeline.blend.*
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
For the GFX9 packet we need one more dword.
Fixes an assert in:
dEQP-VK.draw.shader_draw_parameters.base_vertex.draw_indexed
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This fixes disabled Z/stencil.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is also a GFX9 register.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This seems like a workaround, but we don't see the bug on CIK/VI.
On SI with the dEQP-VK.memory.pipeline_barrier.host_read_transfer_dst.*
tests, when one tests complete, the first flush at the start of the next
test causes a VM fault as we've destroyed the VM, but we end up flushing
the compute shader then, and it must still be in the process of doing
something.
Could also be a kernel difference between SI and CIK.
v2: hit this with a bigger hammer. This fixes a bunch of hangs
in the vk cts with the robustness tests.
Fixes: f4e499ec79 ("radv: add initial non-conformant radv vulkan driver")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101334
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This reduces the number of BOs that we need for the BO lists during
a submission.
Currently uses a fairly simple linear search for finding free space,
that could eventually be improved to a binary tree, which with some
per-node info could make a check for space O(1) and finding it O(log n),
in the number of buffers in that slab.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This just sets them to INVALID COLOR, instead of shifting the
attachments together.
This also fixes a number of cases where we use it first and only
then check if it is VK_ATTACHMENT_UNUSED.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Fixes: f4e499ec79 "radv: add initial non-conformant radv vulkan driver"
Reviewed-by: Dave Airlie <airlied@redhat.com>
When using DCC some clear values don't require a cmask eliminate
step. This patch adds support for black and black with alpha 1,
there are other values, but I don't have access to a comprehensive list.
This works by setting the cmask eliminate predicate when doing the
fast clear, and later when doing the cmask elimination making sure
the draws are predicated.
This increases the fps on Sascha Willems deferred.
Tonga: 580fps->670fps on a Tonga PRO card.
Polaris 730->850fps
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Some of the Sascha Willems demos pick a D32/S8 format for the depth
buffer, then do a LOAD_OP_CLEAR/LOAD_OP_DONT_CARE on it, which means
we don't get to merge the undefined->depth and clear htile transitions.
This add the stencil aspect to the pending clears if there is a depth
clear pending and the stencil aspect is don't care.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This doesn't get used yet, it just adds support to various PKT3
emissions to enable it later.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
coverity complains about the deref before NULL check.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Before bcae327469 this was emitting CP DMA packet even on SI, but
apparently hasn't caused too many problems. After that commit the
CP DMA code now always sets the CIK+ only bit for prefetch. Just
follow radeonsi there and don't try to prefetch at all.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101334
Fixes: bcae327469 "radv: realign cp dma code with radeonsi"
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This just moves lots of stuff to the bind stage rather than
dealing with it in the draw stage.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
There is no need to calculate this at draw time.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
I want to use these in the pipeline setup stage.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Divides are pretty slow, and this is in the hot path of a draw.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
These are just some register changes ported from radeonsi for gfx9.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
These are ported from radeonsi, don't know all the rules for
when they should be inserted.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds some rb+ support, as on GFX9 we have to disable
it as per radeonsi.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
GFX9 needs to write event EOP to a fence buffer, allocate some
space for this, and just write an ever increasing number to it,
this isn't exactly what radeonsi does, but it seems to work.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just adds support for initialising some GFX9 registers,
and handles the different init for the VGT reuse reg.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just adds the strings and includes the gfx9 register defs
in some files that we need them in.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just collapses a few per-stage things into a loop,
shouldn't affect anything.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Sets could have been ignored during previous descriptor set flush
due to the shader not using them and therefore no SGPR being assigned.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Fixes: ae61ddabe8 "radv: move userdata sgpr ownership to compiler side."
We clear the descriptors_dirty array afterwards, so the SGPRs for
the other pipeline don't get updated on the flush for that other
draw/dispatch, so we have to make sure we do it immediately.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Fixes: ae61ddabe8 "radv: move userdata sgpr ownership to compiler side."
In prep for GFX9 refactor some of the eop event writing code
out.
This changes behaviour, but aligns with what radeonsi does,
it does double emits on CIK/VI, whereas previously it only
did this on CIK.
v2: bump the size checks.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This code was in a few places, consolidate into one.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
0x30f regressed mad max.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Fixes: df91abfe5a "radv: Use correct clear words for HTILE."
flush_compute_state doesn't reserve a large chunk, so these need their own reservation.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Fixes: f4e499ec79 "radv: add initial non-conformant radv vulkan driver"
Did some RE'ing what several HTILE words give when read from a descriptor
with HTILE compression enabled.
Seems to align with -pro usage for D16 too.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
And correct implementation to specify only what we support.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This drops the resolve workarounds that change an image
tiling mode behinds it's back, this is horrible and breaks
the image_view->image relationship. Remove all this.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
radv_bind_descriptor_set cannot be used to bind a push descriptor set
since a push descriptor set does not have a buffer list. However,
there is no need to add the buffers again when restoring a set, so
this fix is also an optimization.
Cc: "17.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Fredrik Höglund <fredrik@kde.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>